Professional Documents
Culture Documents
Solution:
1. Check the setting of the clutch release switch in H7 mode, channel 1; refer to Electronic module Universal
controller - H7 - Vehicle test modes (55.640.AG.12-F.90.B.16) .
Place the shuttle lever in forward. Depress the clutch pedal). While still in H7 mode, channel 1, check that the
function disengagement switch is operating between open and closed, indicated by "o" or "c" respectively (the
two-digit number that also appears is the clutch pedal position), when the pedal is raised to approximately 10
% . If necessary, turn the disengagement switch adjusting bolt clockwise to raise the engagement position of
the pedal switch to around 10 % .