Professional Documents
Culture Documents
Nut Lock - 7g
Date: 12/04/2017
Product Code: 653
Barcode: 6001296006534
Technology Acrylic
Wynn’s
MXLOC® Nut42
Lock s particularly
is particularly suitable
suitable forforuses
useson
on less active substrates such as plated surfaces,
less active substrates such as plated surfaces,
where
wheredisassembly
disassemblyisisrequired
required with hand
with hand tools.
tools.
www.wynns.co.za info@wynns.co.za
TECHNICAL DATA SHEET
Nut Lock - 7g
Typical Value
Breakaway Torque
M10 steel bolts &
nuts after 24 hrs at 17 Nm
General information
20°C to 25°C
ISO 10964
This product is not recommended for use in
Prevail Torque M10 pure oxygen and/or oxygen rich systems and
steel bolts & nuts 5 Nm should not be use with chlorine or other strong
ISO 10964
oxidising materials.
Surface Preparation
Application
www.wynns.co.za info@wynns.co.za
TECHNICAL DATA SHEET
Nut Lock - 7g
Application
Technical Data Sheet
Cyanoacrylate
Shake the product thoroughly before use. Apply
Anaerobic
several drops toAdhesive
the bolt & nut. Assemble and
tighten as required. To prevent clogging of the
tighten
nozzle, as
do required.
not let theTotipprevent clogging
touch metal of the
surface during be reliable. However, Chemitop does not
nozzle, do not let the tip touch metal surface
application. assume responsibility for any results obtained
during application. by persons over whose methods Chemitop has
no control. It is the user’s responsibility to
Disassembly determine the suitability of Chemitop products
or any production methods mentioned herein
Remove the standard hand tools. In for a particular purpose, and to adopt such
circumstances where hand tools do not work, precautions as may be advisable for the
use localised heat to bolt or nut, disassemble protection of property and persons against any
while hot. hazards that may be involved in the handling
and use of any Chemitop products. Chemitop
Cleanup specifically disclaims all warranties express or
implied, including warranties of suitability for a
particular purpose arising from sale or use of
To remove cured product use a combination of
Chemitop products. Chemitop further disclaims
solvent and abrasion such as a wire brush.
any liability for consequential or incremental
damages of any kind including lost profits.
Precaution
Further Information
Use with proper ventilation. Avoid contact with
skin and eyes. If contact with skin occurs, rinse
Please see our website at www.chemitop.co.za
with warm water or dissolve gradually with
or consult your local representative.
appropriate de-bonder. Do not try to remove
forcibly. If adhesive gets into eye, keep eye
open and rinse thoroughly. Seek medical
attention immediately. Keep away from children.
Packaging
Manufactured to order.
Disclaimer
www.wynns.co.za info@wynns.co.za