This document provides information about Brainstorming and Research, an engineering firm located in Noida, India that specializes in firmware design, embedded systems, and product development. The firm offers primary capabilities in areas such as low-level firmware design, device driver design, microcontroller architecture, and protocol design for automotive, telecommunications and other industries. Secondary capabilities include digital signal processing, sensor design, and embedded Linux development. The contact is Anuj Kumar Bansal, who has over 20 years of experience in embedded systems and product development.
This document provides information about Brainstorming and Research, an engineering firm located in Noida, India that specializes in firmware design, embedded systems, and product development. The firm offers primary capabilities in areas such as low-level firmware design, device driver design, microcontroller architecture, and protocol design for automotive, telecommunications and other industries. Secondary capabilities include digital signal processing, sensor design, and embedded Linux development. The contact is Anuj Kumar Bansal, who has over 20 years of experience in embedded systems and product development.
This document provides information about Brainstorming and Research, an engineering firm located in Noida, India that specializes in firmware design, embedded systems, and product development. The firm offers primary capabilities in areas such as low-level firmware design, device driver design, microcontroller architecture, and protocol design for automotive, telecommunications and other industries. Secondary capabilities include digital signal processing, sensor design, and embedded Linux development. The contact is Anuj Kumar Bansal, who has over 20 years of experience in embedded systems and product development.
https://www.indiamart.com/bsr-infotech-noida/ Tel: +91-8171423034; Email: anujbansal.bsr2020@gmail.com Primary Capabilities: 1. Low Level Firmware Design 2. Primary Device Driver Design for Firmware 3. Assembly and Embedded ‘C’ Language 4. Firmware Design on different Architecture of Microcontrollers, Multi Core Microcontrollers, SoCs, Digital Signal Processors etc. 5. Protocol Design and Analysis (By hardware and software debugging tools) for Multiple Domains i.e. Automotive, Telecommunication, Industrial, Networking, Metering etc. (Although never worked on GHz or more speed, Only Study) 6. Multiple product design for Indian customers so follow complete product design cycle i.e. Requirement Analysis, Circuit design, pcb schematic and Layout design, Bare Metal Firmware Writing, Component Procurement, Firmware Testing, Product Testing, Support in Manufacturing and Field etc. 7. Sensor Interfacing 8. Simultaneously Multiple Project Management Secondary Capabilities: 1. Digital Signal Processing, FFT and Filter Design and Porting 2. Sensor Front End Design 3. OS based Firmware design mainly with Embedded Linux, Norti, WinCE etc. 4. Hardware Card Debugging and Testing 5. Hardware Re-engineering 6. Embedded Product Testing Others Capabilities: 1. C++, Java, Androis Apps, VC++ 2. FPGA/CPLD, VHDL, Verilog, System Verilog 3. FPGA Verification & Validation 4. Processor, Peripheral, Instruction Modelling 5. Wireless – Physical Layer of Wi-Fi
Anuj Kumar Bansal
Born on India in 1977, Indian Passport no. M6829998 validity up to 25thFeb, 2025 1101, KM03, JP Cosmos, Sector-134, Noida 201304 Tel: +91-7830003034; Email: anujkbansal@gmail.com www.linkedin.com/in/anuj-bansal-27089b1b Academic Qualifications : M.Tech. in Instrumentation in 2000, N.I.T Kurukshetra, Kurukshetra, Haryana, INDIA M.Sc.in Physics with Electronics specialization in 1998, I.I.T. Roorkee, Uttarakhand, INDIA Personality : Innovative, creative and analytical person that enjoy to acquire new knowledge and experience and to work with challenging tasks. Approaches problem solving in a systematic and organized way. Has the ability to reach at a very detailed level while still maintaining overview and orientation. Experience : More than 20 years of professional experience from working with innovative and cutting-edge companies. I have worked extensively with all phases of the embedded product development i.e. strategic planning, budgeting, requirements, specification, electronic design, mechanical design, HW/FW/FPGA (logical, digital, PCB) implementation, testing, validation and documentation. I have successfully managed multi projects in single time frame. Since last few years, taking end to end ownership of high-end designs with compliance testing & field implementation. Working closely with System Designers, HW team, FW team and Software team. My Primary skill is bare metal, low level Firmware designing and secondary skill is to management of multi projects from different domains and multiple technologies.