Professional Documents
Culture Documents
Grove RT635C
Grove RT635C
Dimensions
9' 10"
(2997)
OVER
FENDERS
9' 9-1/2"
(2985)
O/R
22' (6706) FULL EXT
15' 9" (4801) MID EXT
9' 3-1/2" (2832) RET
Tire Size
23.5 x 25 26.5 x 25
A 5' 4-1/4" (1631) 5' 5-1/2" (1661)
B 11' 11-1/2" (3645) 12' 2-1/4" (3715)
C 10' 10-3/4" (3323) 11' (3353)
D 1' 9-3/4" (553) 1' 4-1/4" (413)
E 1' 6-1/4" (464) 1' 7-1/2" (495)
F 5-3/4" (146) 1' 3-1/4" (387)
G 1' 3-1/4" (387) 9-3/4" (248)
H 24.6° 20°
41' 1-3/4"
(12 543)
34' 1-1/2" (10 403) RET
105' (32 006) EXT 13' 1-1/4"
134' 1/4" (40 873) W/BOOM EXTENSION (3991)
156' 1/4" (47 579) W/TELE BOOM EXT 1' 9" 5' 3" 2' 2" 2' 7-1/2"
(533) (1600) (660) (800)
11" 15'
(282) (4572)
2' 7-1/2"
(800)
3'
(914)
1' 5-1/2"
1' 8" 14' 5-3/4" (445)
(813) (4417)
B
C 5"
(127)
H G A
E
D 6' 1"
F (1854)
12' 6"
WHEELBASE
(3810)
18" 11' 1-1/2" 11' 1-1/2" 5-3/4"
(461) (3391) (3391) (145)
25' 2-1/2"
(7681)
C
L ROTATION
2 RT635C
Working range
FEET
190
180
170 0°
51
160 30°
150
29
140
130
120
70° 105
110 100
60°
100 90
50°
90 80
40°
80 70
70 60
30° 58
60 50
50 40
20°
34
40
78°
30 10°
MAX.
BOOM
20 ANGLE
0°
10
0
140 130 120 110 100 90 80 70 60 50 40 30 20 10 FEET
AXIS OF ROTATION
3 RT635C
Superstructure specifications
Boom Counterweight
34 ft. - 105 ft. (10.4 m - 32.0 m) four-section full power 5,787 lbs. (2624 kg) integral with superstructure.
boom. Maximum tip height: 112 ft. (34.0 m). 1,900 lbs. (861 kg) slab in place of auxiliary hoist.
4 RT635C
Carrier specifications
Chassis Oscillation Lockouts
Box section frame fabricated from high-strength, low Automatic full hydraulic lockouts on rear axle permit
alloy steel. Integral outrigger housings and front/rear oscillation only with boom centered over the front.
towing and tie down lugs.
Brakes
Outriggers System Full hydraulic split circuit disc-type brakes operating on
Four hydraulic telescoping single-stage double box all wheels. Spring-applied hydraulically released front
beam outriggers with inverted jacks and integral axle-mounted parking brake.
holding valves. Three position setting. All steel
fabricated quick release type outrigger floats, 24 in. Tires
(610 mm) in diameter. 23.5R25 radial earthmover type, tubeless.
Maximum outrigger pad load: 47,604 lbs. (21 593 kg). *26.5 x 25 - 26PR bias, earthmover type, tubeless.
RT635C 5
Weight Reductions for Load Handling Devices
6 RT635C
34 - 105 ft. 5,787 lbs. 100% 360°
(10.4 - 32.0 m) (2624 kg)
Pounds
Maximum boom length (ft.) at 0 deg. boom angle (no load) 105
Boom
Angle 34 40 50 *58 60 70 80 90 100 105
16,350 12,700 8,390 6,030 5,710 4,380 3,370 2,590 1,960 1,700
0° (27.1) (33) (43) (50.8) (53) (63) (73) (83) (93) (98)
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
RT635C 7
34 - 105 ft. 5,787 lbs. 50% 360°
(10.4 - 32.0 m) (2624 kg) 15' 9" Spread
Pounds
Boom
Angle 34 40 50 *58 60 70 80 90
16,350 12,700 7,280 4,550 4,140 2,740 1,770 1,060
0°
(27.1) (33) (43) (50.8) (53) (63) (73) (83)
A6-829-012055A
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
8 RT635C
34 - 105 ft. 5,787 lbs. 0% 360°
(10.4 - 32.0 m) (2624 kg) 9' 3-1/2" Spread
Pounds
Boom
Angle 34 40 50
8,090 4,980 1,880
0° (27.1) (33) (43)
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
RT635C 9
29 ft. 5,787 lbs. 100% 360°
(8.8 m) (2624 kg)
Pounds
9,360
30 (77.5)
8,960
35 (75.5)
8,610 *5,360
40 (73) (78)
7,860 5,160
45
(71) (75.5)
7,210 4,960
50 (68.5) (73.5)
6,610 4,760
55 (66) (71)
5,960 4,710
60 (64) (68.5)
5,360 4,660
65 (61.5) (66)
4,810 4,610
70 (58.5) (63.5)
4,360 4,560
75 (56) (60.5)
3,910 4,160
80 (53.5) (58)
3,510 3,660
85 (50.5) (55)
3,160 3,260
90 (47.5) (52)
2,860 2,860
95 (44.5) (48.5)
2,430 2,430
100 (41) (45)
2,020 2,020
105 (37.5) (41.5)
1,670 1,670
110 (33) (37)
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
10 RT635C
29 ft. 5,787 lbs. 50% 360°
(8.8 m) (2624 kg) 15' 9" Spread
Pounds
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
RT635C 11
29 - 51 ft. 5,787 lbs. 100% 360°
(8.8 - 15.5 m) (2624 kg)
Pounds
A6-829-011361B
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
12 RT635C
29 - 51 ft. 5,787 lbs. 50% 360°
(8.8 - 15.5 m) (2624 kg) 15' 9" Spread
Pounds
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
RT635C 13
34 - 105 ft. 5,787 lbs. Stationary 360° 23.5R25 Tires
(10.4 - 32.0 m) (2624 kg)
Pounds
Boom
Angle 34 40
6,560 3,840
0° (27.1) (33)
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
14 RT635C
34 - 105 ft. 5,787 lbs. Stationary Defined Arc 23.5R25 Tires
(10.4 - 32.0 m) (2624 kg) Over Front
+-6°
Pounds
Boom
Angle 34 40 50 *58 60 70
13,850 9,240 4,760 2,690 2,410 1,410
0° (27.1) (33) (43) (50.8) (53) (63)
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
RT635C 15
34 - 105 ft. 5,787 lbs. Pick and Carry Boom Centered 23.5R25 Tires
(10.4 - 32.0 m) (2624 kg) Up to 2.5 MPH Over Front
Pounds
Boom
Angle 34 40 50 *58 60 70
13,850 9,170 4,760 2,690 2,410 1,410
0° (27.1) (33) (43) (50.8) (53) (63)
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
16 RT635C
34 - 105 ft. 5,787 lbs. Stationary 360° 26.5 x 25 - 26PR Tires
(10.4 - 32.0 m) (2624 kg)
Pounds
10 37,600 35,550
(66) (69.5)
31,450 31,200
12 (62) (66.5)
21,550 21,200 20,600
15 (56) (61.5) (68)
12,950 12,650 12,200 11,800 11,950
20 (44) (52.5) (61.5) (65.5) (66.5)
8,510 8,250 7,800 7,460 7,690 8,760 8,920
25 (27) (42) (54.5) (60) (61) (66) (69)
5,470 5,080 4,780 4,920 5,530 6,130 6,510
30 (27.5) (46.5) (54) (55.5) (61) (65) (68)
3,230 2,970 3,100 3,680 4,250 4,570 4,900
35 (37) (47) (49) (56) (61) (64.5) (67.5)
1,890 1,670 1,790 2,340 2,900 3,180 3,460
40 (24) (39) (42) (51) (57) (61) (64.5)
1,340 1,760 1,760 1,760
45 (45) (52) (57) (61)
Boom
Angle 34 40 50
7,200 4,240 1,250
0° (27.1) (33) (43)
A6-829-011677
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
RT635C 17
34 - 105 ft. 5,787 lbs. Stationary Defined Arc 26.5 x 25 - 26PR Tires
(10.4 - 32.0 m) (2624 kg) Over Front
+-6°
Pounds
Boom
Angle 34 40 50 *58 60 70
14,100 9,410 4,870 2,760 2,470 1,460
0° (27.1) (33) (43) (50.8) (53) (63)
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
18 RT635C
34 - 105 ft. 5,787 lbs. Pick and Carry Boom Centered 26.5 x 25 - 26PR Tires
(10.4 - 32.0 m) (2624 kg) Up to 2.5 MPH Over Front
Pounds
Boom
Angle 34 40 50 *58 60 70
14,100 9,410 4,870 2,760 2,470 1,460
0° (27.1) (33) (43) (50.8) (53) (63)
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
RT635C 19
NOTES:
20 RT635C
Rated Lifting Capacities Symbols Glossary
Frame Steering
IMPORTANT NOTES:
Speed H Hookblock
Grade Gear
RT635C
Grove Worldwide – World Headquarters Grove France S.A.
Grove North America 16, chaussée Jules-César, 95520 OSNY
1565 Buchanan Trail East B.P. 203, 95523 CERGY PONTOISE CEDEX
P.O. Box 21 France
Shady Grove, Pennsylvania 17256, U.S.A. Tel: [Int + 33] (1) 30313150
Tel: [Int + 1] (717) 597-8121 Int: [Int + 33] (1) 30386085
Fax: [Int + 1] (717) 597-4062
Western Hemisphere, Asia/Pacific Grove Asia/Pacific - Regional Office
171 Chin Swee Road
Grove Europe Limited* #06-01 San Centre
Sunderland SR4 6TT, England Singapore 0316
Tel: [Int + 44] 191 565-6281 Tel: [Int + 65] 536-6112
Fax: [Int + 44] 191 564-0442 Fax: [Int + 65] 536-6119
Europe, Africa, Middle East Asia/Pacific, Near East
Constant improvement and engineering progress make it necessary that we reserve the right to make
specification, equipment, and price changes without notice. Illustrations shown may include optional
equipment and accessories and may not include all standard equipment.
Distributed By: