Professional Documents
Culture Documents
Open Therm CM737 User (LV)
Open Therm CM737 User (LV)
OFFMANAUTO
Beskrivning Fördelar
Viessmanns CM737 är en pro- • Lättskött panel med “OK-knapp”.
grammerbar regulator designad för • Stor LCD-skärm
att reglera värmen effektivt till en
komfortabel nivå när ni är hemma • 7-dagars värmeprogram för att följa familjens livsstil,
och göra energibesparingar när ni till bästa möjliga energibesparing.
är borta. Denna instruktion förkla- • 4 oberoende temperaturnivåer per dag (från 5°C till
rar hur man programmerar och an- 35°C).
vänder CM737 för att erhålla bästa
• Semesterknappen sparar energi genom att minska
komfort till lägsta pris.
temperaturen i 1 till 99 dagar.
• Inbyggt minne sparar programmen.
Översikt CM737
1 2 3 4 5
14
6
13 7
12
11
8
10
9
2
STÄLLA IN CM737 ‘Komma igång’ SW
Denna sektion visar dig hur man ställer in och sköter CM737 i 2 enkla steg:
Grundprogram
Grundprogrammet har 4 temperaturnivåer per dag och kan ställas in mellan kl 03:00 och
02:50 kommande dag – vilket gör det möjligt med en kvällstemperatur även efter midnatt. Varje
temperaturnivå kan ställas in mellan 5°C och 35°C, med 0.5°C steg. Det fabriksinställda programmet
för värme är följande.
3
SW ‘Effektiv styrning’ PROGRAMMERING AV CM737
4
ANVÄNDNING AV CM737 ‘Utnyttja finesserna’ SW
Välj driftläge Specialfunktioner
CM737 kan reglera i tre olika driftslägen: • SEMESTER program
Automatik, Konstant eller Av. Önskat driftläge Med semesterprogrammet kan man ställa
väljs genom att trycka på antingen AUTO, in en konstant rumstemperatur (fabriksin-
MAN eller OFF knapparna. Skärmen visar ställning = 10°C) för ett specifikt antal dagar
vilket av alternativen AUTO, MAN eller OFF (från 1 till 99 dagar). Därmed kan man spa-
som har valts. ra energikostnader under de dagar huset är
• AUTO (automatik) läget används om man tomt, men återgå till normal drift dagen man
önskar att CM737 skall följa tidsprogram- kommer tillbaka.
men (förprogrammerade eller anpassade). Inställning av semester program:
Används CM737 i detta läge, erhålls hög
komfort till maximal energibesparing. a. Se till att CM737 är i AUTO eller MAN
driftläge.
• MAN (konstant) läget används om man
önskar att CM737 skall reglera med en kon- b. Tryck på semester knappen för att
stant rumstemperatur dygnet runt. Önskad visa antal semesterdagar och önskad
rumstemperatur kan ställas in mellan 5°C temperatur, tillsammans med semester-
och 35°C med hjälp av eller knap- symbolen resväska .
parna. c. Tryck på eller tidsknapparna för
• OFF (av) läget används om man önskar att att att ställa in önskad semestertid (1 –
CM737 skall reglera till lägsta möjliga tem- 99 dagar). Bekräfta med den gröna
peratur. 5°C är fabriksinställt som frysskydd knappen.
för ert hem. d. Tryck på eller knapparna för att
ställa in semester temperaturen (5°C -
Normal användning 35°C). Bekräfta med den gröna
knappen.
• Temperaturförfrågan
CM737 kommer nu reglera till den nya tem-
Vid utomhuskompenserad reglering visar peraturen under de antal dagar som huset
skärmen den önskade rumstemperaturen. är tomt. Varje midnatt minskas semesterlis-
Vid rumstemperaturstyrd reglering visar tan med en dag fram tills antal dagar är slut.
skärmen den aktuella rumstemperaturen. CM737 återgår därefter till normal drift enligt
För att se den önskade rumstemperaturen, MAN eller AUTO läget. För att annullera eller
tryck in knappen. Denna temperatur kom- när som helst avbryta semesterprogrammet,
mer blinka på skärmen i 5 sekunder innan tryck på knappen en andra gång.
den aktuella rumstemperaturen visas igen.
• Tillfällig temperaturförändring Ändring av klockan
Under normal drift (AUTO läge) kan den För att ändra klockan, använd eller
programmerade temperaturen ändras till- knapparna till rätt tid och tryck på den gröna
fälligt till en annan nivå, genom att trycka knappen igen för att bekräfta ändringar.
på eller knapparna. Observera: vid
nästkommande programmerade tempera-
turväxling, kommer CM737 att återgå till
ursprunglig temperaturnivå.
5
SW FELSÖKNING AV CM737
6
CM737 - USER GUIDE ENG
Description Features
The Viessmann CM737 is a • Ergonomic user interface featuring an ‘OK-button’.
programmable heating controller • Large LCD (Liquid Crystal Display) Screen.
designed to control your heating
system efficiently, providing • 7-day heating program to match your lifestyle, whilst
comfortable temperatures when maximising energy savings.
you are at home and energy • 4 independent temperature levels per day (from 5°C to
savings when you are away. The 35°C).
following instructions explain how
• Holiday button saves energy by letting you reduce the
to program and use the CM737 to
temperature for 1 to 99 days.
provide the most home comfort at
the least cost. • Built-in Memory holds the user program indefinitely.
Controls Layout
1 2 3 4 5
14
6
13 7
12
11
8
10
9
7
ENG ‘Getting Started’ SETTING-UP THE CM737
This section shows you how to setup and run the CM737 in 2 simple steps:
8
PROGRAMMING THE CM737 'Efficient Daily Use’ ENG
Reviewing the Heating Program You now have a choice of how to set the
program for the next day:
To review or edit the heating program use
the PROGRAM or buttons to navigate f. i) Press the COPY DAY button to copy Mon-
between the 4 individual programming periods day’s program into Tuesday. The display will
for that day. Use the DAY button to step through go blank apart from the ‘non flashing’ day
each day of the week, so the complete 7 day indicator, which indicates the day copied and
heating program can be reviewed or edited. the ‘flashing’ target day to copy the program
to. To accept this day press the green
button. To select a different target day press
Modifying the Heating Program
the DAY button until the ‘flashing’ day indica-
To change the heating program: tor is under the required day, then accept it by
a. Press either of the PROGRAM or pressing the green button. Note: Once
buttons to enter the programming mode. The the target day is confirmed it becomes the
time / temperature settings for period 1 on day that is copied if the COPY DAY button is
Monday (Day 1) will be flashing as shown. pressed again.
The active period is highlighted by a flashing
OR
square around the numbers at the bottom of
the screen and the selected day is shown ii) Press the DAY button to move the day indi-
with the day indicator. cator to Tuesday (Day 2). The program for that
1 2 3 4 5 6 7 day can then be adjusted by following steps b
to e. Programs for the remaining days can be
set in the same way, using the DAY button to
move to the next day.
To exit the programming mode select the de-
sired operating mode by pressing the AUTO,
1 2 3 4 MAN or OFF buttons. Note: To run the adjusted
b. To adjust the period start time use the program select the AUTO mode.
or buttons, the ‘OK?’ indicator will be dis-
played to confirm the change. Holding the but- Disabling / Enabling Time Periods
ton down will change the time quickly. The CM737 has 4 periods each day that
Note: If you are pressing the or but- can be programmed, but you may not need
tons and the display flashes the next peri- all of these switch points for your heating
od, it means the next period will be pushed requirements. Therefore, any period from 2 to
forward. 4 can be removed from (or returned to) the
c. Once the required time is reached press the heating program profile.
green button to confirm. To disable or enable time periods:
Note: If the original time setting did not re- a. To disable unwanted periods go to the de-
quire adjustment press the green but- sired period ( 2 to 4 ) using the PROGRAM
ton to move to step ‘d’. or buttons to navigate, ensure the
correct period is highlighted with the flash-
d. The temperature setting for period 1 on ing square symbol. Press and hold the
Monday (Day 1) will now be flashing. To ad- button for at least 2 seconds and the display
just this press the or buttons and will indicate the period has been removed
confirm the setting again by pressing the from the program.
green button.
b. To enable periods again follow the same
e. The next time and temperature period will procedure as above, navigating to the al-
now be active. Adjust this by repeating steps ready disabled period. To enable this period
b - d above until all 4 periods are set for again press and hold the button for at
Monday or press the AUTO button to run the least 2 seconds.
program as set, at any time.
9
ENG ‘Using the Features’ OPERATING THE CM737
10
TROUBLESHOOTING THE CM737 ENG
Symptom Possible Cause Remedy
A flashing The CM737 receives power 1) The CM737 is not connected to
symbol appears on supply from the heating the correct terminals of the heating
the display within one appliance, but no information. appliance. Check if the wiring is con-
minute of the CM737 nected to the OpenTherm connection
being powered on. terminals of the heating appliance.
2) The heating appliance is not config-
ured correctly. Contact your installer.
Display is blank. After installing the CM737 Check if the power supply cable of
no power to the heating the heating appliance is connected -
appliance is supplied and the otherwise contact your installer.
rechargeable battery hasn’t
been charged (takes max 1hr
until fully charged).
The power supply or Check if the power supply cable of
the communication link the heating appliance is connected.
between the CM737 and the After the power is restored the time
heating appliance has been may need to be adjusted - otherwise
interrupted for more than 8hrs. contact your installer.
A flashing The heating appliance is When you press the button, you will
symbol appears showing an error probably see an error code. This fault
on the display after code depends on the type of heating
the CM737 being appliance. Check the manual of the
operating for a period heating appliance for more informa-
of time. tion or contact your installer.
11
F CM737 - MODE D’EMPLOI
Description Caractéristiques
Le CM737 de Viessmann est un • Interface ergonomique pour l’utilisateur .
régulateur programmable pour • Grand écran à cristaux liquides.
la chauffage. Il a été conçu pour
vous aider à contrôler plus effi- • Programmation hebdomadaire vous permettant d’adapter
cacement votre installation de le thermostat à votre rythme de vie tout en économisant
chauffage en vous garantissant au maximum l’énergie consommée.
une température confortable • 4 niveaux indépendants de température par jour (entre 5 et 35°C).
lorsque vous êtes à la maison et
• Bouton Vacances pour maintenir votre maison à une
générer des économies lors de
température réduite pendant votre absence, réglable de 1 à
vos absences. Les instructions
99 jours (économie d’énergie). Au delà de cette période, le
suivantes expliquent comment
Chronotherm reprendra son fonctionnement normal.
programmer et utiliser le CM737.
• Mémoire intégrée qui conserve indéfiniment le programme
de l’utilisateur.
Vue d’ensemble
1 2 3 4 5
14
6
13 7
12
11
8
10
9
12
PROGRAMMATION DU CM737 "Démarrage" F
Cette section vous montre comment programmer et faire fonctionner votre CM737 en
effectuant 3 opérations simples :
13
F "Optimisation du fonctionnement" PROGRAMMATION DU CM737
14
FONCTIONNEMENT DE VOTRE CM737 "Utilisation des fonctions" F
Sélection du mode de fonctionnement Utilisation des fonctions spéciales
Votre CM737 peut utiliser l’un des trois modes • Fonction VACANCES
de fonctionnement suivants : Automatique,
Manuel ou “Hors-gel”. Pour obtenir le mode de Cette fonction Vacances vous permet de
fonctionnement désiré, appuyez sur les tou- programmer une température constante (va-
ches AUTO, MAN ou OFF. L’écran indique le leur par défaut = 10°C) pendant un nombre
mode de fonctionnement actuellement actif en spécifié de jours (entre 1 et 99 jours). Cela
affichant le mot AUTO, MAN ou OFF. vous permet de réduire les coûts en énergie
lorsque vous vous absentez de chez vous
• Le mode AUTO (automatique) programme
et de reprendre un fonctionnement normal
votre CM737 pour qu’il respecte le programme
intégré de température (par défaut ou personna- dès votre retour.
lisé). Le fonctionnement de votre CM737 consti- Pour programmer la fonction Vacances :
tue le meilleur moyen de maintenir une tempé-
a. Vérifiez que votre CM737 soit en mode
rature très confortable tout en économisant au
maximum l’énergie consommée. AUTO ou MAN.
15
F Recherche des causes de pannes sur le CM737
16
CM737 - BENUTZERHANDBUCH D
Beschreibung Ausstattungsmerkmale
Der Viessmann CM737 ist ein pro- • Ergonomische Benutzerschnittstelle mit „OK-Taste”.
grammierbarer Heizungsregler, ent- • Große LCD (Flüssigkristallanzeige).
wickelt um mit Ihrem Heizsystem
effiziente, komfortable Temperaturen • 7-Tage-Heizprogramm, das genau an Ihren Lebensstil
während Ihrer Anwesenheit und angepasst ist und dabei eine größtmögliche Energieer-
Energieeinsparung während Ihrer sparnis bewirkt.
Abwesenheit zu ermöglichen. Die • 4 unabhängige Temperaturebenen pro Tag (von 5°C
folgenden Bedienhinweise erklären bis 35°C).
die Einstellungen und die Benutzung
• Die Urlaubstaste spart Energie indem sie es Ihnen er-
des CM737 um Ihnen den maxima-
möglicht, die Temperatur für 1 bis 99 Tage zu reduzieren.
len Komfort bei minimalen Kosten zu
bieten. • Eingebauter Speicher für unbegrenzte Speicherung
des Benutzerprogramms.
Steuerungslayout
1 2 3 4 5
14
6
13 7
12
11
8
10
9
17
D ‘Inbetriebnahme’ EINSTELLEN DES CM737
Dieser Abschnitt zeigt Ihnen in 3 einfachen Schritten, wie Sie den CM737 einstellen und be-
treiben:
18
PROGRAMMIERUNG DES CM737 ‘Effizient in der täglichen Benutzung’ D
Überprüfen des eingebauten Heizpro- Sie haben jetzt die Wahl, wie Sie Ihr Programm
gramms für den nächsten Tag einstellen werden:
Um das eingebaute Heizprogramm zu überprü- f. i) Drücken Sie die Taste COPY DAY, um das
fen oder zu bearbeiten, verwenden Sie bitte die Programm vom Montag auf den Dienstag zu
Tasten PROGRAM oder zum Wechseln kopieren. Die Anzeige ist jetzt leer, außer
zwischen den einzelnen 4 Programmintervallen der ‘nicht blinkenden’ Anzeige Tag, die den
für diesen Tag. Verwenden Sie die Taste DAY, kopierten Tag darstellt, und dem ‘blinkenden’
um zu jedem Tag der Woche zu wechseln, so Zieltag, auf den das Programm kopiert wird.
dass das vollständige 7-Tage-Heizprogramm Drücken Sie die grüne Taste (), um diesen
überprüft oder bearbeitet werden kann. Tag zu bestätigen. Um einen anderen Ziel-
tag zu wählen, drücken Sie die Taste DAY,
Ändern des eingebauten Heizprogramms bis sich die ‘blinkende’ Anzeige Tag unter
dem gewünschten Tag befindet. Drücken
a. Drücken Sie entweder die Tasten PROGRAM Sie dann die grüne Taste () zum Bestätigen.
oder die Tasten PROGRAM , um in den Hinweis: Wenn der Zieltag einmal bestätigt
Programmiermodus zu gelangen. Die Einstel- ist, wird er der Tag, der kopiert wird, wenn die
lungen Zeit / Temperatur für das Intervall 1 Taste COPY DAY wieder gedrückt wird.
am Montag (Tag 1) blinken wie aufgezeigt. ODER
Das aktive Intervall wird durch ein blinkendes
Quadrat um die Ziffern unten auf der Anzeige ii) Drücken Sie die Taste DAY, um die Anzeige
hervorgehoben und der gewählte Tag wird mit Tag auf Dienstag (Tag 2) zu wechseln. Das
der Anzeige Tag angezeigt. Programm für diesen Tag kann dann mittels der
1 2 3 4 5 6 7
folgenden Schritte b - e angepasst werden. Pro-
gramme für die verbleibenden Tage können auf
die gleiche Art und Weise eingestellt werden.
Dabei wird die Taste DAY verwendet, um zum
nächsten Tag zu springen.
Um den Programmiermodus zu verlassen,
wählen Sie den gewünschten Betriebsmodus
1 2 3 4 mit den Tasten AUTO, MAN oder OFF. Hin-
weis: Um das eingestellte Programm ablaufen
b. Verwenden Sie die Tasten oder , um zu lassen, wählen Sie den Modus AUTO.
den Intervallstart einzustellen. Die Anzeige
hört auf zu blinken und ‘OK?’ wird ange- Ausschalten / Einschalten von Zeitin-
zeigt. Das Festhalten der Taste bewirkt ein tervallen
schnelles Verändern der Uhrzeit.
Der CM737 verfügt über 4 Zeitintervalle, die
Hinweis: Wenn Sie die Tasten oder für jeden Tag programmiert werden können.
drücken und die Anzeige stellt das nächste Möglicherweise benötigen Sie aber nicht all
Intervall blinkend dar, bedeutet dies, dass diese Schaltpunkte für Ihre Heizanforderun-
die nächste Änderung vorgeschoben wird. gen. Daher kann jedes der Intervalle 2 bis 4
c. Wenn die gewünschte Uhrzeit erreicht vom Heizprogrammprofil entfernt (oder wieder
ist, drücken Sie die grüne Taste zum hinzugefügt) werden.
Bestätigen. Hinweis: Wenn die ursprüngli- Ausschalten oder Einschalten der Zeitintervalle:
che Zeiteinstellung keine neue Einstellung a. Um nicht benötigte Zeitintervalle auszuschal-
erfordert, drücken Sie die grüne Taste ten, gehen Sie mit den Tasten PROGRAM
und gehen über zu Schritt ‘d’. oder zu dem gewünschten Intervall (
2 bis 4 ) und gewährleisten Sie, dass das
d. Die Temperatureinstellung für Intervall 1 am richtige Intervall mit dem blinkenden Quadrat
Montag (Tag 1) blinkt jetzt. Um diese einzu- hervorgehoben ist. Drücken und halten Sie
stellen, drücken Sie die Tasten oder die Taste für mindestens 2 Sekunden und
und bestätigen Sie die Einstellungen wieder die Anzeige wird bestätigen, dass das Inter-
mit der grünen Taste . vall aus dem Programm entfernt wurde.
e. Das nächste Zeit- und Temperaturintervall ist b. Um ein Intervall wieder einzuschalten, verfah-
jetzt aktiv. Stellen Sie dieses ein, indem Sie die ren Sie genau so wie oben beschrieben und
oben genannten Schritte b - d wiederholen, bis gehen Sie zu dem bereits ausgeschalteten In-
alle 4 Intervalle für Montag eingestellt sind, oder tervall. Um dieses Intervall wieder einzuschal-
drücken Sie jederzeit die Taste AUTO, um das ten, drücken und halten Sie die Taste für
Programm wie eingestellt auszuführen. mindestens 2 Sekunden.
19
D ‘Verwendung der Ausstattungsmerkmale’ BETRIEB DES CM737
20
PROBLEMBEHANDLUNG BEIM CM737 D
Symptom Mögliche Ursache Maßnahme
Ein blinkendes Der CM737 erhält Strom 1) Das CM737 ist nicht an die
Symbol erscheint auf durch das Heizgerät jedoch richtigen Anschlüsse des Heizgerätes
der Anzeige innerhalb keine Informationen. angeschlossen. Prüfen Sie die Ver-
der ersten Minute nach drahtung auf Richtigkeit.
Start des CM737. 2) Das Heizgerät ist nicht richtig
konfiguriert. Kontaktieren Sie Ihren
Installateur.
Ein Symbol Kommunikations- Fehler 1) Prüfen Sie ob das Stromkabel des
erscheint auf der aufgrund eines Kurzschlusses Heizgerätes angeschlossen ist.
Anzeige und wird in der Verbindung zwischen
ständig (nicht Heizgerät und CM737. 2) Prüfen Sie die Verdrahtung.
blinkend) angezeigt. 3) Kontaktieren Sie Ihren Installateur.
Anzeige ist leer Nach der Installation des Prüfen Sie ob das Stromkabel des
CM737 wurde das Heizgerät Heizgerätes angeschlossen ist.
stromseitig nicht in Betrieb Andernfalls kontaktieren Sie Ihren
genommen und dadurch Installateur.
die aufladbare Batterie nicht
geladen (benötigt max. 1 Std.
zur vollständigen Ladung).
Die Stromversorgung für das Prüfen Sie ob das Stromkabel des
Verbindungskabel zwischen Heizgerätes angeschlossen ist.
CM737 und dem Heizgerät Nachdem die Stromversorgung wieder
wurde für mehr als 8 Stunden hergestellt ist müssen eventuell die
unterbrochen. Daten und Zeiten wieder eingestellt
werden. Bei Bedarf kontaktieren Sie
Ihren Installateur.
Ein Symbol Das Heizgerät meldet einen Wenn Sie den drücken, sehen Sie
erscheint auf der Fehler. möglicherweise einen Fehlerko-
Anzeige nachdem der de. Dieser Fehlerkode ist vom
CM737 eine längere vorhandenen Heizgerät abhängig.
Zeit in Betrieb ist. Für mehr Informationen sehen Sie in
das Handbuch des Heizgerätes oder
kontaktieren Sie Ihren Installateur.
21
PL CM737 - Podręcznik użytkownika
Opis Właściwości
Programowalny regulator CM737 • Czytelny dla użytkownika panel sterujący
umożliwia użytkownikowi oszczędne • Duży wyświetlacz ciekłokrystaliczny
i efektywne sterowanie systemem
grzewczym. Regulator utrzymuje • Programowanie ogrzewania w cyklu tygodniowym
temperature komfortu kiedy miesz- według indywidualnych życzeń użytkownika przy
kańcy są w domu. Temperatura może zachowaniu maksymalnej oszczędności energii
być obniżona na noc oraz w czasie • 4 dowolne poziomy temperatury w ciągu doby (od 5
gdy mieszkańcy są poza domem. do 35°C).
Niniejsz instrukcja wyjaśnia jak za-
• Tryb wakacyjny umożliwiający obniżenie temperatury
programować regulator aby zaosz-
na 1–99 dni w celu zmniejszenia zużycia energii
czędzić maksymalną ilość energii.
• Przechowywanie programu użytkownika we wbudo-
wanej pamięci przez dowolny czas
1 2 3 4 5
14
6
13 7
12
11
8
10
9
22
URUCHOMIENIE CM737 „Pierwsze kroki” PL
Poniżej opisano 3 podstawowe czynności w celu uruchomienia CM737:
23
PL „Efektywne codzienne sterowanie” PROGRAMOWANIE CM737
24
OBSŁUGA CM737 Korzystanie z funkcji PL
Wybór trybu działania Korzystanie ze specjalnych funkcji
Termostat posiada trzy tryby działania: auto- • Tryb wakacyjny
matyczny, ręczny lub wyłączony. Aby ustawić
tryb działania, naciśnij przycisk AUTO, MAN Tryb wakacyjny umożliwia utrzymywanie
lub OFF. Na ekranie zostanie wyświetlony stałej temperatury (domyślnie = 10°C)
napis AUTO, MAN lub OFF wskazujący, który przez określoną liczbę dni (od 1 do 99).
tryb jest aktualnie aktywny. Umożliwia to zmniejszenie zużycia energii i
związanych z tym kosztów na czas wyjazdu
• W trybie AUTO (automatycznym) termo- oraz wznowienie normalnego działania w
stat działa zgodnie z wbudowanym pro-
dniu powrotu.
gramem temperatury (domyślnym lub do-
stosowanym). Korzystanie z CM737 w tym Aby ustawić tryb wakacyjny:
trybie to najlepszy sposób na utrzymanie
a. Sprawdź, czy termostat działa w trybie
komfortowego poziomu temperatury przy jak
AUTO lub MAN.
najmniejszym zużyciu energii.
• W trybie MAN (ręcznym) termostat działa b. Wciśnij przycisk trybu wakacyjnego ;
jak zwykły termostat utrzymujący tempera- zostanie wyświetlony licznik dni wakacji
turę na stałym poziomie przez cały dzień. i ustawienie temperatury, a także wskaź-
Poziom można ustawić między 5 a 35°C, nik trybu wakacyjnego .
korzystając z przycisków i . Termostat c. Korzystając z przycisków zegara
będzie utrzymywał tę temperaturę, dopóki i , ustaw okres wakacji (1–99 dni), a
nie zostanie zmieniony tryb działania lub następnie wciśnij zielony przycisk ,
ustawiona inna temperatura. aby potwierdzić ustawienie.
• W trybie OFF (wyłączony) utrzymuje mini-
d. Korzystając z przycisków i , ustaw
malne ustawienie temperatury wynoszące
(domyślnie) 5°C, aby uchronić mieszkanie temperaturę na okres wakacji (5–35°C),
przed mrozem. a następnie wciśnij zielony przycisk
, aby potwierdzić ustawienie.
25
PL ROZWIĄZYWANIE PROBLEMÓW Z CM737
26
CM737 - PŘÍRUČKA PRO UŽIVATELE CZ
Popis Vlastnosti
Viessmann CM737 je programova- • Ergonomické uživatelské rozhraní s tlačítkem OK.
telný regulátor teploty vyvinutý pro • Velký LCD displej (z tekutých krystalů).
efektivní řízení Vašeho systému vy-
tápění – poskytuje teplotní komfort, • 7-denní topný program vyhovující vašemu životnímu
jste-li doma, a šetří energii, když stylu při současné maximalizaci úspor energie.
jste pryč. Následující instrukce Vám • 4 nezávislé teplotní hladiny na den (od 5°C do 35°C).
osvětlí, jak programovat a používat
• Tlačítko Prázdniny šetří energii, umožňuje snížení
CM737, abyste dosáhli maximálního
teploty na dobu 1 až 99 dní.
domácího pohodlí při minimálních
nákladech. • Zabudovaná paměť uchovává uživatelský program
nekonečně dlouhou dobu.
Rozmístění ovladačů
1 2 3 4 5
14
6
13 7
12
11
8
10
9
27
CZ Začínáme NASTAVENÍ CM737
28
PROGRAMOVÁNÍ CM737 Hospodárné denní použití CZ
Prohlížení zabudovaného topného Nyní máte možnost výběru, jak nastavit
programu program na příští den:
Chcete-li prohlížet nebo editovat zabudovaný f. i) Stiskněte tlačítko COPY DAY pro
topný program, použijte tlačítka PROGRAM kopírování pondělního programu na úterý.
nebo pro navigování mezi čtyřmi individuálními Displej zůstane prázdný kromě neblikajícího
programovacími obdobími téhož dne. Použijte ukazatele dne, který ukazuje kopírovaný
tlačítko DAY k postupnému procházení každého den a blikajícího cílového dne, do něhož
dne v týdnu, takže může být prohlížen nebo se má program kopírovat. Pro akceptování
tohoto dne stiskněte zelené tlačítko .
editován kompletní 7-denní topný program.
Pro zvolení odlišného cílového dne tiskněte
tlačítko DAY tak dlouho, až blikající ukazatel
Modifikování zabudovaného topného dne se dostane pod požadovaný den, pak jej
programu akceptujte stisknutím zeleného tlačítka .
Změna zabudovaného topného programu: Poznámka: Jakmile je cílový den potvrzen,
a. Stiskněte tlačítko PROGRAM nebo stává se dnem, který se kopíruje, jestliže se
pro vstup do programovacího režimu. znovu stiskne tlačítko COPY DAY.
Nastavení času / teploty na období 1 v NEBO
pondělí (den 1) bude blikat následovně:
Aktivní období se zvýrazní blikajícím ii) Stiskněte tlačítko DAY pro přechod ukazatele
orámováním číslic dole na obrazovce a dne na úterý (den 2). Program pro ten den
může být pak nastaven následujícími kroky
zvolený den se objeví na ukazateli dne.
b až e. Programy pro zbývající dny mohou
1 2 3 4 5 6 7
být nastaveny stejným způsobem s použitím
tlačítka DAY pro přechod na další den.
Pro výstup z programovacího režimu zvolte
požadovaný provozní režim stisknutím tlačítka
AUTO, MAN nebo OFF.
1 2 3 4
Poznámka: Pro spuštění nastaveného
programu zvolte režim AUTO .
b. Pro nastavení začátku období použijte
tlačítka nebo , displej přestane blikat Deaktivace/Aktivace časových období
a ukazatel OK? se zobrazí. Přidržením CM737 má čtyři období v každém dni, která
tlačítka se čas rychle změní. mohou být programována, ale možná nebudete
Poznámka: Pokud tisknete tlačítka potřebovat všechny tyto spínací body pro vaše
nebo a na displeji bliká období další nároky na topení. Jakékoliv období od 2 do 4
změny, znamená to, že naskočí další změna. může být proto vyjmuto (nebo navráceno) do
sestavy topného programu.
c. Jakmile se dosáhne požadovaného času,
stiskněte zelené tlačítko pro potvrzení. Deaktivace nebo aktivace časových období:
Poznámka: Pokud původní nastavení a. Chcete-li provést deaktivaci nežádoucích
času nevyžaduje seřízení, stiskněte zelené období, přejděte na žádané období (tlačítka
tlačítko pro přechod na krok d. 2 až 4 ) s použitím tlačítek PROGRAM
nebo pro navigaci a ujistěte se, že
d. Nastavení teploty na období 1 v pondělí správné období je zvýrazněno symbolem
(den 1) začne nyní blikat. Pro toto seřízení blikajícího čtverečku. Stiskněte a podržte
stiskněte tlačítka nebo a potvrďte tlačítko nejméně po dvě sekundy a displej
nastavení znovu stisknutím zeleného bude indikovat, že toto období bylo vyjmuto
tlačítka . z programu.
e. Další časové a teplotní období bude nyní b. Při opětném aktivování období postupujte
aktivní. Toto nastavte opakováním výše podle stejné procedury, jak je výše uvedena,
uvedených kroků b – d, dokud všechna navigováním na již dříve deaktivované
čtyři období nebudou nastavena pro pondělí období. Pro opětnou aktivaci tohoto období
nebo stiskněte tlačítko AUTO pro chod stiskněte a přidržte tlačítko nejméně po
programu podle nastavení, a to kdykoliv. dvě sekundy.
29
CZ Využití vlastností PROVOZ CM737
30
ODSTRAŇOVÁNÍ PORUCH REGULÁTORU CM737 CZ
Příznak Možná příčina Náprava
Blikající CM737 je napájený od zdroje 1) CM737 není připojen ke správným
symbol se objeví na tepla, ale nepřijímá od něj svorkám zdroje tepla. Zkontrolujte,
displeji během jedné žádné informace. zda je kabel připojený na OpenTherm
minuty, když je CM737 připojovací svorkovnici na zdroji tepla.
připojen na napájení. 2) Zdroj tepla není správně nakonfi-
gurován. Kontaktujte svou instalační
firmu.
symbol na Chyba v komunikaci 1) Zkontrolujte, zda je zdroj tepla
displeji permanentně způsobená přerušením nebo připojen k napájení.
svítí. zkratováním propojení mezi
zdrojem tepla a CM737. 2) Zkontrolujte kabelové propojení.
3) Kontaktuje Vaší instalační firmu.
Prázdný displej Po instalaci CM737 nebylo Zkontrolujte, zda je zdroj tepla připo-
připojeno napájení ze zdroje jen na napájení – v případě že není,
tepla a dobíjecí baterie nebyly kontaktuje Vaší instalační firmu.
dobíjeny (plné dobití trvá max
1 hod)
Napájecí nebo komunikační Zkontrolujte, zda je zdroj tepla připo-
kabel mezi CM737 a zdrojem jen na napájení. Po obnovení napájení
tepla byl odpojen více než je nutno nastavit datum a čas – nebo
8 hod. kontaktuje Vaší instalační firmu.
Blikající Zdroj tepla vykazuje chybu Jestliže stisknete tlačítko, pravdě-
symbol se objeví na podobně se ukáže chybový kód. Tento
displeji po určité době chybový kód závisí na typu zdroje
provozu CM737. tepla. Obraťte se pro více informací na
návod ke zdroji tepla, nebo kontaktuje
Vaší instalační firmu.
31
42010941-018 AA
32