Professional Documents
Culture Documents
Question 1
Question text
Modern revised form of metric system and worlds most widely used system of units
Question 2
Question text
Question 3
Question text
In practice, every three calendar years will have 365 days, and every fourth year is a “leap
year”, which has 366 days, to make up for the extra quarter day over four years.
Question 4
Question text
The three forces in the figure create a vertical resultant acting through point A. If T is known
to be 361 lb., compute the values of F and P.
NOTE: see fig-4 from the LIST OF FIGURE in week-1
Question 5
Question text
________________ is defined as the forces which lies in the line of activity but do not intersect
or forms a parallel at a common point.
Question 6
Question text
Question text
Question text
The moment of the resultant of a system of forces with respect to any axis or point is equal
to the vector sum of the moments of the individual forces of the system with respect to the
same access or point.
Question 9
Question text
Question 10
Question text
It is the world’s most widely used system of units, both in everyday commerce and in
science.
Question 11
Question text
The cylinders in the figure have the indicated weights and dimensions. Assuming smooth
contact surfaces, determine the reactions at A, B, C, and D on the cylinders.
The correct answer is: A = 347.39 kN, B = 600 kN, C = 400.85 kN, D = 347.39 kN
Question 12
Question text
The length of the lever arm connecting the axis to the point of the force application is one
of the three quantities of torque magnitude.
Question 13
Question text
The 300-lb force and the 400-lb force shown in the figure are to be held in equilibrium by a
third force F acting at an unknown angle θ with the horizontal. Determine the values of F.
NOTE : see fig-10 from the LIST OF FIGURE in Week-1
Question 14
Question text
The figure represents the concurrent force system acting at a joint of a bridge truss.
Determine the value of P and F to maintain equilibrium of the forces.
Question 15
Question text
Varignon’s Theorem states that the sum of torques due to several forces applied to a single
point is equal to the torque due to the sum (resultant) of the forces.