You are on page 1of 9

Juan Francisco calihua calihua

PC GAMER

How to build a pc gamer ?


to build a gamer pc we have to have a high budget economically to build a powerful
high performance computer for video games, for work, study etc.

how to choose the necessary elements to


build a gamer?
when choosing the elements that make up a gamer pc

take into account the compactness of the devices of both the motherboard

with the precessor, the ram memories, and the power source.

for cooling it is necessary that the type of processor you are going to buy normally

bring a heat sink or cooling and temperature regulation with the same processor

if we want a liquid cooling for our pc

We must choose a cabinet for liquid cooling so we can cool the pc and have a high

performance.
COMPONETS OF PG GAMER

• Mother bord

• Memories Ram ddr4

• Procesator

• Liquid cooling

• Ssd (State solid state ) 480 gb

• Power source

• Sata cable

• Pass current

• Graphic card

• Currents adapters

• Cabinet for pc gamer

• Gamer mouse

• Gamer key board

• 4k monitor

• OS windows 10

Tools
screwdriver
process
Normally, the gamer cabinets already come with an integrated power source that is

from 800 whats to 1200 whats

Let's make sure the power source is ready

then we put the motherboard inside the cabinet

accommodate it in the most fair way and screw it

immediately if we already have the processor inside the motherboard if we do not

proceed to place it

Procesator

Mother board

Power supply
we proceed to place the liquid cooling in the processor and we cellamos it with great

precision

Liquid cooling

then we continue with the placement of the ram memeries

Ram
Memories
later we integrate the video card we connect it with its voltage cable this with from

the power source

VIDEO
CARD

We proceed to connect the cables for the power buttons on the pins of the

motherboard

POWER LED +-

HD LED +- POWER SW

RESET SW
and we connect all the current components and then we connect the sata and ide

cables for the hard disk once everything is connected we put the hard disk to install

the operating system and finally we have assembled a powerful pg gamer at the end

SATA ID

SSD 240 GB
STATE SOLID
DRIVE

we only install the windows 10 operating system and voila, we have our gamer pc

ready to play

You might also like