Professional Documents
Culture Documents
STANDARD 7010
First edition
2003-10-01
AMENDMENT 2
2007-07-01
Reference number
ISO 7010:2003/Amd.2:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
--`,,```,,,,````-`-`,,`,,`,`,,`---
ii
Copyright International Organization for Standardization © ISO 2007 – All rights reserved
Provided by IHS under license with ISO
No reproduction or networking permitted without license from IHS Not for Resale
ISO 7010:2003/Amd.2:2007(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
Amendment 2 to ISO 7010:2003 was prepared by Technical Committee ISO/TC 145, Graphical symbols,
Subcommittee SC 2, Safety identification, signs, shapes, symbols and colours.
iii
--`,,```,,,,````-`-`,,`,,`,`,,`---
AMENDMENT 2
IMPORTANT — The colours represented in the electronic file of this International Standard can be
neither viewed on screen nor printed as true representations. For colour-matching purposes, please
consult ISO 3864-1 which provides colorimetric and photometric properties together with, as a
guideline, references from colour order systems.
⎯ P015: No reaching in
⎯ P017: No pushing
⎯ P018: No sitting
--`,,```,,,,````-`-`,,`,,`,`,,`---
Reference
No. Safety sign Description/application
Referent
underneath
For everyday use in
Field of
workplaces and public
application
areas and on products
Safety signing
M005
Format of
Connect an application Safety manuals and
earth notices, product labelling
terminal to
Test data obtained
the ground
according to
ISO 9186:2001 are not
available. Consequently,
a supplementary text sign
shall be used to increase
comprehension except
Additional
when the safety sign is
information
supplemented by manuals,
instructions or training.
NOTE — The criteria of
acceptability adopted by
ISO/TC 145/SC 2 are given
on the website:
http://www.iso.org/tc145/sc2.
2
Copyright International Organization for Standardization © ISO 2007 – All rights reserved
Provided by IHS under license with ISO
No reproduction or networking permitted without license from IHS Not for Resale
ISO 7010:2003/Amd.2:2007(E)
Reference
No. Safety sign Description/application
Referent
--`,,```,,,,````-`-`,,`,,`,`,,`---
malfunction or when left
unattended
Hand holding a plug and
pulling toward the arrow's
Image content
direction out from a wall
outlet
For everyday use in
Field of
workplaces and on
application
products
M006 Safety signing
Disconnect Format of
mains plug application Safety manuals and
from notices, product labelling
electrical Test data obtained
outlet according to
ISO 9186:2001 are not
available. Consequently,
a supplementary text sign
shall be used to increase
comprehension except
Additional when the safety sign is
information supplemented by manuals,
instructions or training.
Reference
No. Safety sign Description/application
Referent
--`,,```,,,,````-`-`,,`,,`,`,,`---
4
Copyright International Organization for Standardization © ISO 2007 – All rights reserved
Provided by IHS under license with ISO
No reproduction or networking permitted without license from IHS Not for Resale
ISO 7010:2003/Amd.2:2007(E)
Reference
No. Safety sign Description/application
Referent
--`,,```,,,,````-`-`,,`,,`,`,,`---
Reference
No. Safety sign Description/application
Referent
6
Copyright International Organization for Standardization © ISO 2007 – All rights reserved
Provided by IHS under license with ISO
No reproduction or networking permitted without license from IHS Not for Resale
ISO 7010:2003/Amd.2:2007(E)
Reference
No. Safety sign Description/application
Referent
--`,,```,,,,````-`-`,,`,,`,`,,`---
Reference
No. Safety sign Description/application
Referent
8
Copyright International Organization for Standardization © ISO 2007 – All rights reserved
--`,,```,,,,````-`-`,,`,,`,`,,`---
Reference
No. Safety sign Description/application
Referent
To prohibit touching
Function
objects/parts of an object
Hand about to touch a
Image content
horizontal line
For everyday use in
Field of
workplaces and public
application
areas and on products
Safety signing
Format of
application Safety manuals and
notices, product labelling
Reference
No. Safety sign Description/application
Referent
10
Copyright International Organization for Standardization © ISO 2007 – All rights reserved
Provided by IHS under license with ISO
No reproduction or networking permitted without license from IHS Not for Resale
ISO 7010:2003/Amd.2:2007(E)
Reference
No. Safety sign Description/application
Referent
To prohibit access of a
Function person with metallic
implants
Outline of a hip joint and
Image content socket joined by a black
hip implant
For everyday use in
Field of
workplaces and public
application
areas
Safety signing
Format of
P014 application Safety manuals and
notices
No access
for persons Test data obtained
with metallic according to
implants ISO 9186:2001 are not
available. Consequently,
a supplementary text sign
shall be used to increase
comprehension except
Additional when the safety sign is
information supplemented by manuals,
--`,,```,,,,````-`-`,,`,,`,`,,`---
instructions or training.
Reference
No. Safety sign Description/application
Referent
--`,,```,,,,````-`-`,,`,,`,`,,`---
Additional when the safety sign is
information supplemented by manuals,
instructions or training.
12
Copyright International Organization for Standardization © ISO 2007 – All rights reserved
Provided by IHS under license with ISO
No reproduction or networking permitted without license from IHS Not for Resale
ISO 7010:2003/Amd.2:2007(E)
Reference
No. Safety sign Description/application
Referent
To prohibit pushing
Function
against an object
Horizontal line and vertical
Image content block with human figure
leaning against it
For everyday use in
Field of
workplaces and public
application
areas and on products
Safety signing
Format of
application Safety manuals and
notices, product labelling
P017 Test data obtained
according to
No pushing
--`,,```,,,,````-`-`,,`,,`,`,,`---
ISO 9186:2001 are not
available. Consequently,
a supplementary text sign
shall be used to increase
comprehension except
Additional when the safety sign is
information supplemented by manuals,
instructions or training.
Reference
No. Safety sign Description/application
Referent
To prohibit sitting on a
Function
surface
Horizontal line with human
Image content
figure sitting on it
For everyday use in
Field of
workplaces and public
application
areas and on products
Safety signing
Format of
application Safety manuals and
notices, product labelling
Test data obtained
P018 according to
No sitting ISO 9186:2001 are not
available. Consequently,
a supplementary text sign
shall be used to increase
comprehension except
Additional when the safety sign is
information supplemented by manuals,
instructions or training.
--`,,```,,,,````-`-`,,`,,`,`,,`---
14
Copyright International Organization for Standardization © ISO 2007 – All rights reserved
Provided by IHS under license with ISO
No reproduction or networking permitted without license from IHS Not for Resale
ISO 7010:2003/Amd.2:2007(E)
Reference
No. Safety sign Description/application
Referent
--`,,```,,,,````-`-`,,`,,`,`,,`---
Reference
No. Safety sign Description/application
Referent
--`,,```,,,,````-`-`,,`,,`,`,,`---
Reference
No. Safety sign Description/application
Referent
Reference
No. Safety sign Description/application
Referent
--`,,```,,,,````-`-`,,`,,`,`,,`---
Reference
No. Safety sign Description/application
Referent
--`,,```,,,,````-`-`,,`,,`,`,,`---