API570 CALCULATIONS SUMMARY SHEET- 2016
‘APIETO
In corrosive servico-
Recalculate MAWP
aE, cone) EO is “MAWP” Per 570)
Here, t= tact-2( CR x Inspection Interval)
$= Allowable Stress, E = Joint Efficiency, D = OD = Out Dia
teat
fleesion Rate (CRL =
time (years) between tat ANd ty
|csin tate cxs ry) ———
time (years) between tyros 82 tant
ct teed
Remaiig ie, RL (years) =
ccomrosion rate (Highest)
Inspection Interval Lenser of 4 of RL or Tale
=_ cme RREA (Aternive Barlow formula from API RP $74)
els Minimum distance between the toes of the filet.
‘Here, D = ID, t= Min required thickness of fillet weld patch _
“API 57.
Min, Required Thick | Oldcomoded:
Flanged Fittings SPD)
corks fsewwint = “a5¢ “CA If Unknown materials, use 7000 for
Min. Required Thick | Oldcorroded:
Valves Bod SPD
ves Body {ninwwind = “a5¢°*CA IF Unknown materials, use 7000 for S,
ASME B33
‘Min, Thick/ ED = £2 Here, P= sure, D =|
Mine aera & tn 22 Here, P= Design Pressure, D = OD
SY | ThiclPressure = Allowable Stress, E = Joint Efficiency, Y = Coefficient Factor =4
Design Thick Pipe
Min, Required Thick
Pipe
PD. PD.
toinnnind rae pA CA OF tna Foe ECA
Hers, P = Design Pressure, D = OD, CA = Corrosion Allowance
S= Allowable Stress, E = Joint Efficiency, Y = Coefficient Factor =.4
Page 1 of2API 570 CALCULATIONS SUMMARY SHEET-2016
Cost effective twins CA
Schedul/Order Tick | ~ 75 (For Seamless Pie)
Pipe fusca _(ForERW Pips)
Retirement Thick [ea =d6 [37
Blanks’ Blind Fl, od
Here, dg = Gasket ID, P = Design Pressure, S = Allowable Stress,
E = Joint Efficiency.
NewiCost Effective
tin OB AE
‘Here, dg = Gasket ID, P = Design Pressure, S = Allowable Stress,
E
int Efficiency, CA = Corrosion Allowance
‘Thermal Expansion!
Thermal Growth |G ~ 100 Here, G~ Growth in inch,
BE
= Factor, L ~ Length in Feet
Fillet Welds
LEG= 1414xTHROAT, THROAT = 707*LEG
Ximin(REQUIRED LEG) for Socket” Slip on flanges
te= St, oF-7t min, (required throat) for Branch Connectionsrepads
Hiydro Pressure Pipe
‘Hyd test Pressure (H.T) = 1.5 « P x = Here, '= Design Pressure
‘Sy=Suess @ Test Temp Sq = Suess @ Design Temp
Pneumatic Pressure
1.1 * P Here, P= Design pressure
Pipe
Joint Efficiency? | Piping Table A-IB (See Table 302.3.4)
Quality Factor
Preheat Temp, See Table 3301.1
|SeeTable BTL
= Soo Table 34132 and Tobie —
Acceptance Criteria
MDMT Seo ible Ac] and Table 30327 and Fig, 325228
IGS
Flanges ‘Max Hydro Press —1.5 X system design pressure-rounded to 25 psi
(hate)
‘Types 150, 300, 400, 600, 90, 1500, 2500
NPS 4 thru NPS 24
‘Hydro Pressure ‘Max Press = 1.5 X 100" Flange rating (Round to next 25 PSI)
iwi 1 mia for NPS 2 and ¥ and 2 min for NPS 2 12-8 3min 107
5 ae d=1D
TTeasion Test) Rupture
Stress) UTS
Toad/Area(ASMIE See. 1X)
Page 20f2