Professional Documents
Culture Documents
Marlin Bolt Action Rimfire Manual
Marlin Bolt Action Rimfire Manual
To insure warranty protection, this card must be completed and mailed within 10
H 5-
State
❑ Marlin advertisement
To help us provide new and better products we would appreciate your answers to the following questions.
❑ Brand reputation
❑ Marlin web site
❑ Marlin catalog
(signature of owner)
Zip Code
Date of Purchase
BOLT ACTION
City
Rimfire Rifle
IMPORTANT: Never attempt to load your rifle with
❑ 18-24
❑ 35-49
Address
Model _______________________________________________________________________________________________________
tion stamped on the barrel. If this rifle is chambered for
State
❑ No
Your Age Group
either 22 Winchester Magnum Rimfire or 17 Hornady
❑ Under 18
I have read the Owner’s Manual
Magnum Rimfire, do not attempt to use 22 Short, Long
❑ 25-34
❑ Yes
❑ 50+
or Long Rifle cartridges.
days of purchase.
ly. Failure to follow the instructions and warnings in this manual can cause
accidents resulting in injury or death. This manual should always accompany
Serial Number
this firearm, and be transferred with it upon change of ownership.
The warranty card attached to the cover must be filled out and mailed
Please Print
Your Occupation
❑ Professional
within 10 days of purchase.
❑ Managerial
❑ Industrial
❑ Student
WARNING: KEEP THIS FIREARM OUT OF THE REACH OF CHILDREN,
Owner
❑ Office
e-mail
❑ Farm
UNAUTHORIZED INDIVIDUALS, AND OTHERS UNFAMILIAR WITH THE
City
SAFE HANDLING OF FIREARMS.
LIMITED WARRANTY
The Marlin Firearms Company
FIVE YEAR LIMITED WARRANTY AGAINST
DEFECTS IN MATERIAL & WORKMANSHIP
This firearm warranty is good only to the ORIGINAL OWNER who has registered his own-
ership with The Marlin Firearms Company at 100 Kenna Drive, North Haven, Connecticut.
WARRANTY and CERTIFICATE OF OWNERSHIP card must be completed and mailed
to The Marlin Firearms Company at the above address WITHIN TEN (10) DAYS of
North Haven, CT 06473-0903
P.O. Box 248
MFC
purchase to insure the protection of the warranty. NOTICE of defect in materials
and/or workmanship must be received by the company WITHIN FIVE (5) YEARS from
the date of purchase.
Normal wear, or damage resulting from neglect, abuse, alteration, or repairs not
made or authorized by The Marlin Firearms Company or use of non-Marlin parts are
not covered by the warranty.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE
OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
magazine.
22 WMR
17 HMR
22 LR
All models have receivers grooved for To move the point of impact to the left,
Misfires telescope sight rings and scopes. Heavy move the rear sight base to the left. To
If you squeeze the trigger and the car- barrel varmint models do not have open move the point of impact to the right,
tridge does not fire, remain in the shoot- sights and require a scope. If you would move the rear sight base to the right.
ing position and count to 10. Then oper- like to have open sights installed, see a Vertical Correction (Elevation)
ate the bolt to eject the misfired cartridge competent gunsmith.
To raise the point of impact, raise the
from the gun.
Models with open sights were pre-sight- rear sight. To lower the point of impact,
Underpowered Shot ed at the factory. However, due to indi- lower the rear sight. The sight can be
An underpowered shot is unusual if the vidual sighting characteristics, minor raised and lowered by moving the
ammunition is fresh, clean, and factory adjustments may be necessary. stepped elevator forward and back with
loaded. However, if you hear an unusual your thumb.
Always ensure the rifle is pointed in a safe
sound or low report, you should stop direction. Put the rifle on SAFE and open
immediately and proceed as follows: the bolt before making any sight changes.
4
For Models Equipped With tion of the rear sight in the desired direc-
Screw-Adjustable Rear Sights tion. Retighten the screw and fire again.
Horizontal Correction (Windage) Continue this process until your shots
are horizontally zeroed-in.
To move the point of impact to the left or
right, loosen the leaf binding screw until Vertical Correction (Elevation) To raise
you can move the leaf manually. Move the rear sight (if you are shooting low)
Screw-adjustable rear sight
the leaf in the appropriate direction, turn the elevation adjustment screw
retighten the screw and fire again. clockwise. To lower the rear sight (if you
Continue this process until your shots are shooting high) turn the elevation
are horizontally zeroed-in. adjustment screw counterclockwise.
Vertical Correction (Elevation) Continue adjusting and firing until your
shots are vertically zeroed-in.
To raise the rear sight (if you are shoot-
ing low) turn the elevation adjustment Fire sight
screw clockwise. To lower the rear sight
(if you are shooting high) turn the eleva-
tion adjustment screw counterclockwise.
Continue adjusting and firing until your
shots are vertically zeroed-in.
For Models
Equipped With Fire Sights
Horizontal Correction (Windage) To
adjust the point of impact, loosen the
dovetail screw until you can move the
sight manually. To move the point of
impact to the left, move the rear sight
base to the left. To move the point of
impact to the right, move the rear sight G
base to the right. Adjustments can be
Removing the bolt
made by gently tapping the dovetail por-
5
Scope Mounting • WARNING: Never attempt to wipe down With normal use it is not necessary to
or clean a loaded firearm. Follow clean the bore of your rifle. However, if
Your rifle has a grooved receiver instructions under “How to Unload” the rifle gets wet, or if foreign material
designed to handle tip-off-type 22 scope before cleaning. gets into the action or barrel, cleaning as
bases. They are made by several manu- described below is recommended.
NOTE for stainless steel models:
facturers in various heights, to accom- Although stainless steel is corrosion- Being sure your rifle is unloaded and
modate different objective diameters, resistant, it can rust. If the rifle gets wet, pointed in a safe direction, open the bolt,
and are available through your local gun dirty, or is subject to excessive handling, pull the trigger fully to the rear and com-
dealer. You may also order directly from remove all moisture and wipe down metal pletely withdraw the bolt from the rear of
Marlin Gun Service. Call 1-800-544-8892 parts with oil or a rust-inhibitor. the receiver, as shown in (G).
for more information.
Minor scratches can be “buffed out” of Clean the bore and barrel by using any
How to Clean Your Rifle stainless steel with a “Scotch-BriteTM Very standard 22 caliber (17 caliber for Models
Fine” pad, available in hardware and chambered in 17HMR or 17 Mach 2)
• WARNING: Before cleaning your rifle, automotive supply stores. commercial cleaning rod and cleaning
be certain it is completely unloaded, patches. Clean the barrel with powder
and the bolt has been removed. solvent and wipe lightly with gun oil after
cleaning. Always clean the rifle from the
breech (chamber end) to the muzzle.
Caution: Before using any solvent or other
gun cleaning product, read the label care-
fully to be sure it will not damage either the
H finish or any parts of this firearm.
NOTE ON HEAVY USAGE: When your
rifle has fired more than 1,000 rounds or
is a year old, lubrication of the trigger
mechanism and cocking cam will assure
continued smooth operation.
Aligning bolt for reassembly
6
Open the bolt and remove the clip maga- • WARNING: The breech bolt assemblies
zine (if your rifle is a clip-loader). Remove of Marlin 22 caliber and 17 caliber bolt
the takedown screw on the underside of action rifles are not interchangeable
the forearm, and the forward trigger guard between rifles. (Do not disassemble the
screw. Remove the barreled action from breech bolt.) Each breech bolt is individu-
the stock. ally fitted to the receiver at our factory to
Apply a small amount of good quality gun assure proper headspacing. Should the
grease to the area shown in I. bolt assemblies be removed from the
rifles for cleaning or safety reasons, be
Next, open the bolt and apply a small
certain that they are reinstalled in the
amount of grease to the cocking cam, as
same rifle from which they were
shown in J.
removed.
If the rifle continues to be fired extensive-
The last three digits of the serial number
ly, repeat this lubrication about every I appearing on the left side of the receiver,
1,000 rounds or once a year.
are inscribed on the breech bolt with an
NOTE: The safest possible way to store Apply grease. electric pencil. These three digits will help
this, or any other Marlin bolt action rifle, you to identify the proper rifle for reinstal-
is with the bolt removed and kept sepa- lation of the bolt.
rately, under lock and key. J
Failure to match the factory fitted breech
To replace the bolt assembly, align the tab bolt to the proper rifle could create an
on the left forward portion of the bolt (see unsafe condition that could cause a mal-
H), with the corresponding groove in the function of the firearm, or worse, personal
rear of receiver. With trigger pulled, insert injury to the shooter or a bystander.
bolt into rear of receiver. Never force the
Use a very thin coat of light oil during
breech bolt into the receiver, as serious
below freezing conditions. Condensation
damage may result. If you encounter diffi-
droplets will form soon after the rifle is
culty, remove the bolt and re-check align-
brought into a warm room, or it may
ment. After cleaning, and before reinsert-
become wet during inclement weather. In
ing the bolt, ensure the barrel is clear.
Apply grease. any case, all moisture should be
7
removed. Exterior metal finishes may be Guns requiring warranty repairs should 3. Accessories such as scopes, scope
wiped down with a slightly oiled cloth. For be returned to the factory. Be sure to fol- mounts, gun case, quick-detach type
long term storage, lightly oil the bore, barrel low the “Shipping and Handling” instruc- swivels, slings, etc. should be
and action with gun oil. Remove the bolt tions in this manual. removed prior to returning the firearm.
(see G) and store it separately. Your
4. Inside the box, include the following
firearm should be completely unloaded and Non-Warranty Repairs information: model number, serial
stored in a dry area. Never store your number, description of damage or
Your local gunsmith may be able to
firearm in a carrying case. problem, and under what conditions
repair your gun. If not, ship it to the facto-
Repair Instructions ry, following the “Shipping and Handling” problem occurs.
instructions in this manual.
Your firearm has been designed, engi- 5. Keep a record of your serial num-
neered and manufactured in accordance After receiving your firearm, we will send ber when returning a firearm.
with Marlin's rigid quality control standards. you an estimate of the repair cost.
6. Clearly mark your return address on
However, any mechanical device may Repairs will begin upon receipt of your
the outside of the box and on your
occasionally require adjustment or repair. check or money order. If repairs are not
instruction sheet.
possible, your firearm will be returned.
Questions regarding the performance 7. Do not ship live ammunition under any
and serviceability of your firearm should Shipping and Handling circumstances.
be addressed to our Service Department.
You should include the Serial Number, When sending your firearm to the facto- 8. Ship your firearm via insured Parcel
Model Number and a full description of ry, please follow these instructions: Post or U.P.S. Shipment must be pre-
the conditions and problems involved. paid and addressed to:
1. Prior to shipping, be absolutely certain
that the firearm is completely MFC INC.
Warranty Repairs unloaded (See “How to Unload”). ATTN: SERVICE DEPT.
Our Warranty policy covers all our 100 KENNA DRIVE
firearms against defects in workmanship 2. Pack your firearm carefully. Use
ample cushioning material and a stur- NORTH HAVEN, CONN. 06473
or material for a period of five years from
dy outer cardboard box. Do not ship in
the date of purchase to the original
a special container which you want
owner. See the inside front cover of this returned.
manual for warranty details.
8
IMPORTANT The Fascinating History of Marlin
If you have any questions or problems
relating to your new Marlin, would like
additional information on safe operation,
or wish to order parts or accessories, just
W ritten by the late William S. Brophy, Marlin’s Senior Technical
Manager and Official Company Historian for many years, this
prodigious book details the history of the Marlin
call our Customer Service Center. A Firearms Co. and its products. The hardbound
Service Representative can be reached at
the number listed below, between 8 A.M. volume contains more than 600 pages and
and 4:30 P.M. (Eastern Time), Monday over 1000 illustrations. Must reading for any-
through Friday. one interested in all the models — pistols,
rifles and shotguns — made by Marlin, and
1-800-544-8892 in the story of more than a century of
(Toll Free) firearms production in America.
20
BOLT ACTION 15
42
39
40
22
19
21
Rimfire Rifle 44
41
**1
***14
**43 16
3 *4
52
49 *5 2 60 15
50 47 11
53 54 45
51 61 9
48
*17 33 10
56
18 62
31 30
32
11 61 13
26 34
28
27
29 15
62 55
12
9
46 24
38
58
25
***7
37 35
36
64 63 59
57
PARTS LIST
BOLT ACTION RIMFIRE RIFLE
For parts prices, call 1-800-544-8892 (8 A.M. to 4:30 P.M., Eastern Time, Weekdays)
Be sure to mention gun serial number when ordering parts
ILL. NO. PART NAME ILL. NO. PART NAME
**1 . . . . . . . Barrel 33 . . . . . . . Magazine Mounting Bracket
2 . . . . . . . Barrel Retaining Pin 34 . . . . . . . Magazine Mounting Bracket Screw
3 . . . . . . . Breech Bolt Assembly Pin 35 . . . . . . . Magazine Tube Band
*4 . . . . . . . Breech Bolt, Front 36 . . . . . . . Magazine Tube Band Pin
*5 . . . . . . . Breech Bolt, Rear 37 . . . . . . . Magazine Tube Inside Assembly
***6 . . . . . . . Bullseye 38 . . . . . . . Magazine Tube Outside
***7 . . . . . . . Buttplate/Butt pad 39 . . . . . . . Rear Sight Assembly
8 . . . . . . . Buttplate Screw (2) 40 . . . . . . . Rear Sight Base
9 . . . . . . . Cartridge Lifter 41 . . . . . . . Rear Sight Elevator
10 . . . . . . . Cartridge Lifter and Ejector Spring 42 . . . . . . . Rear Sight Folding Leaf
11 . . . . . . . Cartridge Lifter Pivot Pin **43 . . . . . . . Receiver
12 . . . . . . . Cartridge Lifter Spring 44 . . . . . . . Scope Mount Dummy Screws (4)
13 . . . . . . . Ejector 45 . . . . . . . Sear Spring
***14 . . . . . . . Extractor 46 . . . . . . . Stock
15 . . . . . . . Feed Ramp/Feed Throat 47 . . . . . . . Striker
16 . . . . . . . Feed Throat Assembly Pin 48 . . . . . . . Striker Assembly Pin
*17 . . . . . . . Firing Pin 49 . . . . . . . Striker Cam Bushing
18 . . . . . . . Firing Pin Spring 50 . . . . . . . Striker Cam Pin
19 . . . . . . . Front Sight Base 51 . . . . . . . Striker Knob
20 . . . . . . . Front Sight Base Screw 52 . . . . . . . Striker Retaining Screw
21 . . . . . . . Front Sight Hood 53 . . . . . . . Striker Sleeve
22 . . . . . . . Front Sight Insert 54 . . . . . . . Striker Spring
23 . . . . . . . Magazine Complete 55 . . . . . . . Swivel Stud, Front
24 . . . . . . . Magazine Guard Plate 56 . . . . . . . Swivel Stud, Nut
25 . . . . . . . Magazine Guard Plate Screw (2) 57 . . . . . . . Swivel Stud, Rear
26 . . . . . . . Magazine Guide 58 . . . . . . . Takedown Screw, Front
27 . . . . . . . Magazine Guide & Latch Assembly Pin 59 . . . . . . . Takedown Screw, Rear
28 . . . . . . . Magazine Guide Pivot Pin 60 . . . . . . . Takedown Screw, Stud
29 . . . . . . . Magazine Guide Screw 61 . . . . . . . Trigger Group
30 . . . . . . . Magazine Latch 62 . . . . . . . Trigger Group Screw
31 . . . . . . . Magazine Latch and Ejector 63 . . . . . . . Trigger Guard
32 . . . . . . . Magazine Latch Screw 64 . . . . . . . Trigger Guard Screw
2/05 456504
982 982L 982S 982VS 980S 980V 925 925C 925M 925MC 917V 917VS 981T 983T 983 983S 915YS 915Y 917M2 917M2S
ILL. NO. PART NAME Part No. Part No. Part No. Part No. Part No. Part No. Part No. Part No. Part No. Part No. Part No. Part No. Part No. Part No. Part No. Part No. Part No. Part No. Part No. Part No.
**1 Barrel 175730 175830 175230 175530 174830 174040 174220 174220 175520 175520 175043 175044 176830 176131 176130 176030 173921 173920 174045 174046
2 Barrel Retaining Pin 430397 430397 430397 430397 430397 430397 430397 430397 430397 430397 430397 430397 430397 430397 430397 430397 430397 430397 430397 430397
3 Breech Bolt Assembly Pin 430597 430597 430597 430597 430597 430597 430597 430597 430597 430597 430597 430597 430597 430597 430597 430597 430597 430597 430597 430597
*4 Breech Bolt, Front 105186 105186 105186 105186 104886 104386 104386 104386 105186 105186 105186 105186 104586 105586 105586 105586 203887 203386 104386 104886
*5 Breech Bolt, Rear 520486 520486 505986 505986 505986 520486 520486 520486 520486 520486 520486 505986 520486 520486 520486 505986 505986 520486 520486 505986
***6 Bullseye 320101 320101 N/A N/A N/A N/A N/A N/A N/A N/A N/A 320101 N/A N/A 320101 320101 N/A N/A N/A 320101
***7 Buttplate/Butt pad 417002 417002 N/A N/A N/A N/A 320402 320402 320402 320402 320402 407102 N/A N/A 417002 417002 320402 320402 320402 407102
8 Buttplate Screw (2) 420590 420590 N/A N/A N/A N/A 420590 420590 420590 420590 420590 420590 N/A N/A 420590 420590 420590 420590 420590 420590
9 Cartridge Lifter N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 305487 305287 305287 305387 N/A N/A N/A N/A
10 Cartridge Lifter and Ejector Spring N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 404194 N/A N/A N/A N/A N/A N/A N/A
11 Cartridge Lifter Pivot Pin N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 306197 405198 405198 405198 N/A N/A N/A N/A
12 Cartridge Lifter Spring N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 405295 405295 405394 N/A N/A N/A N/A
13 Ejector 305068 305068 305068 305068 N/A N/A N/A N/A 305068 305068 305068 305068 N/A N/A N/A N/A 304168 304168 N/A N/A
***14 Extractor 305547 305547 305647 305647 305647 305547 305547 305547 305547 305547 305547 305647 305547 305547 305547 305647 305647 305547 305547 305647
15 Feed Ramp/Feed Throat N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 306189 205185 205185 205185 403285 403285 N/A N/A
16 Feed Throat Assembly Pin N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 405298 N/A N/A N/A N/A N/A N/A N/A
*17 Firing Pin 220599 220599 205099 205099 205099 220599 220599 220599 220599 220599 220599 205099 220599 220599 220599 205099 220599 205099 220599 205059
18 Firing Pin Spring 420994 420994 420994 420994 420994 420994 420994 420994 420994 420994 420994 420994 420994 420994 420994 420994 420994 420994 420994 420994
19 Front Sight Base 221339 221339 220339 N/A 220939 N/A 330144 330144 330144 330144 N/A N/A 330144 330144 221339 221439 220399 330144 N/A N/A
20 Front Sight Base Screw 320991 320991 320190 N/A 321091 N/A 320593 320593 320593 320593 N/A N/A 320593 320593 320991 321091 320190 320593 N/A N/A
21 Front Sight Hood 320245 320245 320345 N/A 320345 N/A N/A N/A N/A N/A N/A N/A N/A N/A 320245 320345 320345 N/A N/A N/A
22 Front Sight Insert 230744 230744 404744 N/A 407444 N/A N/A N/A N/A N/A N/A N/A N/A N/A 230744 407444 N/A N/A N/A N/A
23 Magazine Complete 405146 405146 405246 405246 404346 407846 407846 407846 405146 405146 405146 405246 N/A N/A N/A N/A N/A N/A 407846 404346
24 Magazine Guard Plate 305247 305247 305347 305347 304447 304347 304347 304347 305247 305247 305247 305347 N/A N/A N/A N/A N/A N/A 304347 304447
25 Magazine Guard Plate Screw (2) 310790 310790 304491 304491 304491 310790 310790 310790 310790 310790 310790 304491 N/A N/A N/A N/A N/A N/A 310790 304491
26 Magazine Guide N/A N/A N/A N/A 404249 404249 404249 404249 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 404249 404249
27 Magazine Guide & Latch Assembly Pin N/A N/A N/A N/A 404297 404297 404297 404297 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 404297 404297
28 Magazine Guide Pivot Pin N/A N/A N/A N/A 404397 404397 404397 404397 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 404397 404397
29 Magazine Guide Screw N/A N/A N/A N/A 304391 304090 304090 304090 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 304090 304391
30 Magazine Latch 305048 305048 305148 305148 N/A N/A N/A N/A 305048 305048 305048 305148 N/A N/A N/A N/A N/A N/A N/A N/A
31 Magazine Latch and Ejector N/A N/A N/A N/A 304348 304148 304148 304148 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 304148 304348
32 Magazine Latch Screw 320592 320592 305492 305492 N/A N/A N/A N/A 320592 320592 320592 305492 N/A N/A N/A N/A N/A N/A N/A N/A
33 Magazine Mounting Bracket 305049 305049 305149 305149 N/A N/A N/A N/A 305049 305049 305049 305149 N/A N/A N/A N/A N/A N/A N/A N/A
34 Magazine Mounting Bracket Screw 305092 305092 305392 305392 N/A N/A N/A N/A 305092 305092 305092 305392 N/A N/A N/A N/A N/A N/A N/A N/A
35 Magazine Tube Band N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 220121 220121 220121 205021 N/A N/A N/A N/A
36 Magazine Tube Band Pin N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 420698 420698 420698 305497 N/A N/A N/A N/A
37 Magazine Tube Inside Assembly N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 505222 505222 505222 505322 N/A N/A N/A N/A
38 Magazine Tube Outside N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 205123 205123 205123 305320 N/A N/A N/A N/A
39 Rear Sight Assembly 514142 514142 405241 N/A 520142 N/A N/A N/A N/A N/A N/A N/A N/A N/A 514142 520142 405241 N/A N/A N/A
40 Rear Sight Base 520241 520241 N/A N/A 520041 N/A 220641 220641 220641 220641 N/A N/A 220641 220641 520241 520041 N/A 305041 N/A N/A
41 Rear Sight Elevator 320242 320242 N/A N/A 330442 N/A 320942 320942 320942 320942 N/A N/A 320942 320942 320242 330442 N/A 320942 N/A N/A
42 Rear Sight Folding Leaf 214142 214142 N/A N/A 214142 N/A N/A N/A N/A N/A N/A N/A N/A N/A 214142 214142 N/A N/A N/A N/A
**43 Receiver 174003 174003 176003 176003 175005 174005 174005 174005 174003 174003 174003 176003 174008 174004 174004 176004 176001 174001 174005 176005
44 Scope Mount Dummy Screws (4) 320690 320690 320006 320006 320006 320690 320690 320690 320690 320690 320690 320006 320690 320690 320690 320006 320006 320690 320690 320006
45 Sear Spring 420395 420395 420395 420395 420395 420395 420395 420395 420395 420395 420395 420395 420395 420395 420395 420395 420395 420395 420395 420395
46 Stock 505914 505714 404570 404870 404570 404370 504614 504000 504614 504000 504610 505710 404970 404470 505514 505314 503014 503014 504610 505710
47 Striker 420154 420154 420154 420154 420154 420154 420154 420154 420154 420154 420154 420154 420154 420154 420154 420154 420154 420154 420154 420154
48 Striker Assembly Pin 330197 330197 330197 330197 330197 330197 330197 330197 330197 330197 330197 330197 330197 330197 330197 330197 330197 330197 330197 330197
49 Striker Cam Bushing 320253 320253 305252 305252 305252 320253 320253 320253 320253 320253 320253 305252 320253 320253 320253 305252 305252 320253 320253 305252
50 Striker Cam Pin 320799 320799 305197 305197 305197 320799 320799 320799 320799 320799 320799 305197 320799 320799 320799 305197 305197 320799 320799 305197
51 Striker Knob 220355 220355 220455 220455 220455 220355 220355 220355 220355 220355 220355 220455 220355 220355 220355 220455 220455 220355 220355 220455
52 Striker Retaining Screw 320790 320790 305290 305290 305290 320790 320790 320790 320790 320790 320790 305290 320790 320790 320790 305290 305290 320790 320790 305290
53 Striker Sleeve 320856 320856 305056 305056 305056 320856 320856 320856 320856 320856 320856 305056 320856 320856 320856 305056 305056 320856 320856 305056
54 Striker Spring 420594 420594 420594 420594 420594 420594 420594 420594 420594 420594 420594 420594 420594 420594 420594 420594 420594 420594 420594 420594
55 Swivel Stud, Front 420793 430193 N/A N/A N/A N/A 420793 420793 420793 420793 420793 430293 N/A N/A 420793 430293 N/A N/A 420793 430293
56 Swivel Stud, Nut N/A 320352 N/A N/A N/A N/A N/A N/A N/A N/A N/A 320352 N/A N/A N/A 320352 N/A N/A N/A 320352
57 Swivel Stud, Rear 420793 420793 N/A N/A N/A N/A 420793 420793 420793 420793 420793 305490 N/A N/A 420793 305490 N/A N/A 420793 305490
58 Takedown Screw, Front 305390 305390 304291 304291 304291 320992 305390 305390 305390 305390 305390 304791 306192 306192 306192 305690 304291 320992 305390 304791
59 Takedown Screw, Rear 304000 304000 305191 305191 305191 305091 304000 304000 304000 304000 304000 304001 305091 N/A N/A N/A N/A N/A 304000 304001
60 Takedown Screw, Stud 205359 205359 205459 205459 205459 205359 205359 205359 205359 205359 205359 205459 206059 206059 206059 205259 304050 304059 205359 205459
61 Trigger Group 524160 524160 525160 525160 525160 524160 524160 524160 524160 524160 524160 525160 524160 524260 524260 525260 525160 524160 524160 525160
62 Trigger Group Screw 420190 420190 420190 420190 420190 420190 420190 420190 420190 420190 420190 420190 420190 420190 420190 420190 420190 420190 420190 420190
63 Trigger Guard 320758 320758 N/A N/A N/A N/A 320758 320758 320758 320758 320758 305058 N/A N/A 320758 305058 305058 320758 320758 305058
64 Trigger Guard Screw 304002 304002 N/A N/A N/A N/A 304002 304002 304002 304002 304002 304003 N/A N/A 304003 304003 304003 304002 304002 304003
2/05 456504