Professional Documents
Culture Documents
: LA-2017-0641-C
30B Hillview Terrace
Singapore 669248 Issue No. : 5
Page : 1 of 3
A. Dimensional
1A Angle Measurement / CEP In-House developed method,
Calibration of Inclinometer CM-001 (Ver 5, dated 02/03/20),
Probe and Portable Automated Vertical Rotary Table.
Tiltmeter
0 ° to 30 ° 25 "
B. Force Measurement
Calibration of Force CEP CM-003 (Ver 7, dated
Transducers and Load Cells 20/08/19) with reference to ISO
(Compression only) 376: 2011 E.
C. Vibration Measurement
Calibration of Vibration CEP CM-004 (Ver 3, dated
Monitoring Device 20/08/19) with reference to ISO
16063-21:2003 (E), Vibration
a) Radial (Longitudinal) Calibration System.
b) Transverse
c) Vertical
D. Frequency Measurement
Calibration of Vibrating Wire CEP CM-005 (Ver 2, dated
Readout Unit 15/08/19), Function Generator.
E. Pressure Measurement
Calibration of Pressure CEP CM-006 (Ver 3, dated
Measuring Device 04/10/19), Pressure Controller
Approved signatories:
Mr Darrell Teo )
Mr Terence Teo ) All items in the schedule
Mr Lim Wee Kiat )
Note :
This laboratory is accredited in accordance with the recognised International Standard ISO/IEC 17025.
A laboratory's fulfilment of the requirements of ISO/IEC 17025 means the laboratory meets both the
technical competence requirements and management system requirements that are necessary for it
to consistently deliver technically valid calibrations. The management system requirements in ISO/IEC
17025 are written in language relevant to laboratory operations and operate generally in accordance with
the principles of ISO 9001.