Professional Documents
Culture Documents
Student should not receive any marks for work that is the result of improper
collaboration. In particular, a student, who has used a program given to them by
someone else (even where they have acknowledged this), should receive a
reduced mark for the assignment. This mark should normally be zero. If a non-
zero mark is awarded, it should reflect what the student’s work is identifiably
and may include a penalty that is set to reflect how culpable the student is
deemed to have been.
A student, who has provided their design to another student, will normally
receive zero marks.
A student, who has taken a design/program from somewhere or from someone
else without asking permission and without attribution, should receive zero for
that assignment.
Addressing Table
CP-Learning Objectives:
Upon completion of this Complex Engineering Task for Data Communication,
you will be able to:
Scenario
In this Project, you will Design a network architecture using DHCP and NAT IP
services. One router is the DHCP server. The other router forwards DHCP requests to
the server. You will also configure both static and dynamic NAT configurations,
including NAT overload. When you have completed the configurations, verify the
connectivity between the inside and outside addresses.
DEPARTMENT OF Computer Science
FACULTY OF COMPUTER SCIENCE & IT
SUPERIOR COLLEGE, UNIVERSITY CAMPUS, LAHORE, PUNJAB, PAKISTAN
Note: Instead of attaching a server to R2, you can configure a loopback interface on
R2 to use the IP address 192.168.20.254/24. If you do this, you do not need to
configure the Fast Ethernet interface.
Good Luck