Professional Documents
Culture Documents
0579E
Warning
The technical information and parts shown in this
manual are not to be used for: the development,
design, production, storage or use of nuclear, chemical,
biological or missile weapons or other weapons of
mass destruction; or military purposes; or purposes that
endanger global safety and peace. Moreover, do not
sell, give, or export these items, or grant permission for
use to parties with such objectives. Forward all inquiries
to Hitachi Ltd.
Caution
Be sure to read this manual before servicing. To assure safety from fire, electric shock, injury, harmful
radiation and materials, various measures are provided in this Hitachi Multimedia LCD Projector. Be
sure to read cautionary items described in the manual to maintain safety before servicing.
Service Warning
1. When replace the lamp, to avoid burns to your fingers. The lamp becomes too hot.
2. Never touch the lamp bulb with a finger or anything else. Never drop it or give it a shock. They may
cause bursting of the bulb.
3. This projector is provided with a high voltage circuit for the lamp. Do not touch the electric parts of
power unit (circuit) and power unit (ballast), after turn on the projector.
4. Do not touch the exhaust fan, during operation.
5. The LCD module assembly is likely to be damaged. If replacing to the LCD LENS/PRISM assembly,
do not hold the FPC of the LCD module assembly.
6. Use the cables which are included with the projector or specified.
Contents
1. Features ------------------------------------------------------ 2 8. Disassembly diagram ----------------------------------- 40
2. Specifications ----------------------------------------------- 2 9. Replacement parts list ---------------------------------- 53
3. Names of each part---------------------------------------- 3 10. RS-232C communication ------------------------------ 54
4. Adjustment --------------------------------------------------- 5 11. Block diagram --------------------------------------------- 64
5. Troubleshooting -------------------------------------------11 12. Connector connection diagram ----------------------- 65
6. Service points --------------------------------------------- 15 13.Basic circuit diagram ------------------------------------ 66
7. Wiring diagram-------------------------------------------- 31
1. Features
• High Brightness
• Low Noise
• Rich Connectivity
• Compact Body
2. Specifications
Drive system TFT active matrix
Liquid crystal
Panel size 1.6cm(0.63 type)
panel
Number of pixels 1024 (H) x 768 (V)
Lamp 160W UHB
1 Video : Analog 0.7Vp-p(75Ω termination)
Computer IN H/V. sync. : TTL level (positive/negative)
2 Composite sync. : TTL level
Computer
signal Video : Analog 0.7Vp-p (75Ω termination)
Monitor OUT H/V. sync. : TTL level (positive/negative)
Composite sync. : TTL level
VIDEO IN 1.0Vp-p (75Ω termination)
VIDEO Y signal: 1.0±0.1Vp-p, (75Ω termination)
signal S-VIDEO IN C signal: 0.286±0.1Vp-p (NTSC burst signal, 75Ω termination)
0.3±0.1Vp-p (PAL/SECAM burst signal, 75Ω termination)
AUDIO AUDIO IN 1/2 200mVrms, 47kΩ or more (max. 3.0Vp-p)
signal AUDIO OUT 0~200mVrms, output impedance 1kΩ (max. 5.0Vp-p)
Speaker output 1W x 1
Power supply AC100~120V/2.8A, AC220~240V/1.4A
Power consumption 250W
Dimensions 274 (W) x 59 (H) x 205 (D) mm (Not including protruding parts)
Weight 1.8kg
Operation : 5~35°C
Temperature range
Storage : -20~60°C
Remote control x1 Soft case x 1
RGB cable x 1 Lens cover and Strap x 1
Accessories Power cords x 1 or x 2 (*) Filter Cover for bottom-up use x 1
Batteries x 2 Video/Audio cable x 1
User’s manuals x 1 Audio adapter x 1
(*) CP-X253UF : Power cord x 1
CP-X253EF : Power cord x 2
2
CP-X253(M1-20ED)
WARNING
►HOT!: Do not touch around the lamp cover and the exhaust vents during use or just
after use, since it is too hot.
►Do not look into the lens or vents while the lamp is on, since the strong light is not good
for your eyes.
►Do not handle the elevator knobs without holding the projector, since the projector may
drop down.
CAUTION
►Maintain normal ventilation to prevent the projector from heating up. Do not cover, block or
plug up the vents. Do not place anything that can stick or be sucked to the vents, around
the intake vents. Clean the air filter periodically.
►Do not use the security slot to prevent the projector from falling down, since it is not designed
for it.
►Use the shutdown switch only when the projector is not turned off by normal procedure, since
pushing this switch stops operation of the projector without cooling it down.
3
CP-X253(M1-20ED)
Control panel
(1) STANDBY/ON button
(1) (2) (3) (4) (5) (6)
(2) INPUT/ENTER button
(3) MENU button INPUT/ LAMP
STANDBY/ON ENTER
It consists of four cursor buttons. MENU TEMP
Remote control
(1) VIDEO button (2) (3)
(4)
(2) COMPUTER/STORAGE button (1) COMPUTER/ (6)
(3) SEARCH button
VIDEO STORAGE SEARCH
(16) (19)
(8) MAGNIFY - ON button (17) (18)
(20) (21)
POSITION MENU
4
CP-X253(M1-20ED)
4. Adjustment
4-1 Before adjusting
4-1-1 Selection of adjustment
When any parts in the table 4-1 are changed, choose the proper adjusting items with the chart.
5
CP-X253(M1-20ED)
88
justment in the section 4-3.
/255
2. Use DAC - P_PSIG - R : in the FACTORY MENU
112
/255
and use it so that vertical bars are minimized.
136
/255 3. In the same way, use DAC - P_PSIG - G : in the
160
/255 FACTORY MENU and use it so that vertical
bars are minimized.
Press ENTER key
4. In the same way, use DAC - P_PSIG - B : in the
FACTORY MENU and use it so that vertical
bars are minimized.
160 136 112 88 64
/255 /255 /255 /255 /255
6
CP-X253(M1-20ED)
7
CP-X253(M1-20ED)
MID-1 V/3
Major adjustment lattice point No.
MID-2 ... 6
7 5 9
MAX 15 V/6 13 17
ON/OFF ON
OFF
8
CP-X253(M1-20ED)
Adjustment procedure 1
(When a color differential meter is used)
1. First adjust the [MID-1] tone [G:]. Note: Since excessive correction may lead to a
2. Select adjustment point [No.2][G:]. correction data overview during internal
When the background is not [G] monochrome, calculations, use the following values for
press the [ENTER] key on the remote control to reference.
switch to solid [G] monochrome. [No.2] to [No.5] ± 40 or less
3. Measure the illumination at adjustment points [No.6] to [No.9] ± 50 or less
No. 2, No.3, No.10 and No.11. [No.10] to [No.13] ± 70 or less
The values should be: [No.14] to [No.17] ± 120 or less
No.2 = Y2 [lx] No.10 = Y10 [lx] 10.Then adjust the [MIN] tone [G] so that the ad-
No.3 = Y3 [lx] No.11 = Y11 [lx] justment values are two times as much as
4. No.2 and No.3 adjustment points have the aver- MID-1] tone [G] values.
age of Y2 and Y3. This completes [G] color adjustments.
Y2 = ( Y2 + Y3 ) / 2 ± 2 [%] 11.Then adjust [MIN] tone [R] and [B].
Y3 = ( Y2 + Y3 ) / 2 ± 2 [%] Select [No.2] [B:] and press the [ENTER] key
5. No.10 and No.11 adjustment points have the on the Remote control transmitter to change to
average of Y10 and Y11. solid white.
Y10 = ( Y10 + Y11 ) / 2 ± 2 [%] 12.Measure the color coordinates of adjustment
Y11 = ( Y10 + Y11 ) / 2 ± 2 [%] point [No.1] and make a note of them.
6. Then adjust the [MID-1] tone [R] and [B]. Assume that they are x = x1, y = y1.
When the background is [G] monochrome, 13.Now measure the color coordinates of mea-
press the [ENTER] key on the remote control to surement point [No.2] and adjust [No.2][R:] and
switch to solid white. [B:] so that the coordinates are as follows.
7. Measure the color coordinates of adjustment x = x1 ± 0.005 , y = y1 ± 0.010 (Target)
point [No.1] and make a note of them. x = x1 ± 0.020 , y = y1 ± 0.040
Assume that they are x = x1, y = y1. 14.Similarly, measure adjustment points [No.3] to
Note: When the CL-100 color and color differ- [No.17] and adjust their color coordinates start-
ence meter is used, the [ ∆ ](delta) mode ing in order from the small number points.
is convenient. When adjustment point This completes [MIN] tone adjustments.
[No.1] color coordinate has been select- 15.Now make similar adjustments for [MID-2] tone.
ed, set the slide switch on the side to (Adjust [MID-2] tone [G] so that the adjustment
[∆ ](delta) while holding down the [F] but- data set half as many as [MID-1] tone [G].)
ton on the front panel. The measurement 16.Now make similar adjustments for [MID-3],
shown after this displays the deviation [MID-5], [MAX] tones. (It is not necessary to ad-
from measurement point 1. just the [G] data in these tones.)
8. Measure the color coordinates of measurement 17. After completing the step 16, set the value of
point [No.2] and adjust [No.2][R:] and [B:] so the [MID-4] tone [R]: [No.2] to the mean of the
that the coordinates are as follows. values of the [R]: [No.2] in the [MID-3] and
x = x1 ± 0.005 , y = y1 ± 0.010 [MID-4] tones.
9. Similarly, measure adjustment points [No.3] to 18. Set all the values for the [No.2] to [No.17] of
[No.17] and adjust their color coordinates start- the [MID-4] tone [R] and [B] in the same way as
ing in order from the small number points. the step 17.
This completes adjustments required for 19. Finally, set the data of the [MID-6] tone [R] and
[MID-1]. [B] using the values of the [MID-5] and [MAX]
tones in the same way as the [MID-4] tone [R]
and [B] adjustments in the step 17 and 18.
9
CP-X253(M1-20ED)
Adjustment procedure 2
(visual inspection)
1. First adjust [MIN] tone [G:]. same color as measurement point [No.1].
2. Select [No.2] [G:]. Adjustment technique:
If the background is [G] monochrome, press the First, adjust [B:] of the point whose color is to
[ENTER] key on the remote control to switch to be adjusted so that it approximates that of
solid white. [No.1]. If [R:] is low at this time, the image will
3. View measurement point [No.2] and [No.3]. have cyan cast, in which case [R:] is increased.
Lower the [G] color intensity only of the color On the other hand, if [R:] is excessive, the im-
point whose [G] color is more intense than age will have a magenta cast, in which case
measurement point [No.1]. [R:] is decreased.
4. View measurement point [No.10] and [No.11]. Overall, a cyan cast makes it easy to see color
Lower the [G] color intensity only of the color shading.
point whose [G] color is more intense than 7. Next, view measurement points [No.4], [No.5],
measurement point [No.1], and raise the inten- [No.12], [No.13] and make similar adjustments.
sity of the point whose color intensity is lower 8. Then adjust measurement points [No.6], [No.7],
than measurement point [No.1]. [No.8], [No.9], [No.14], [No.15], [No.16] and [No.17].
5. Now adjust the [MIN] tone for colors [R] and This completes the [MIN] tone adjustments.
[B]. 9. Make similar adjustments for other tones, ex-
6. View measurement points [No.2], [No.3], cept the [MID-4] and [MID-6] tones, as de-
[No.10] and [No.11]. Adjust the [R] and [B] of scribed in steps 1 to 8 above.
each measurement point so that they have the
No. 2 deviation range No. 10 deviation range No. 3 deviation range No. 11 deviation range
14 12 16 14 12 16 14 12 16 14 12 16
6 4 8 6 4 8 6 4 8 6 4 8
10 2 1 3 11 10 2 1 3 11 10 2 1 3 11 10 2 1 3 11
7 5 9 7 5 9 7 5 9 7 5 9
15 13 17 15 13 17 15 13 17 15 13 17
No. 4 deviation range No. 12 deviation range No. 5 deviation range No. 13 deviation range
14 12 16 14 12 16 14 12 16 14 12 16
6 4 8 6 4 8 6 4 8 6 4 8
10 2 1 3 11 10 2 1 3 11 10 2 1 3 11 10 2 1 3 11
7 5 9 7 5 9 7 5 9 7 5 9
15 13 17 15 13 17 15 13 17 15 13 17
No. 6 deviation range No. 7 deviation range No. 8 deviation range No. 9 deviation range
14 12 16 14 12 16 14 12 16 14 12 16
6 4 8 6 4 8 6 4 8 6 4 8
10 2 1 3 11 10 2 1 3 11 10 2 1 3 11 10 2 1 3 11
7 5 9 7 5 9 7 5 9 7 5 9
15 13 17 15 13 17 15 13 17 15 13 17
No. 14 deviation range No. 15 deviation range No. 16 deviation range No. 17 deviation range
14 12 16 14 12 16 14 12 16 14 12 16
6 4 8 6 4 8 6 4 8 6 4 8
10 2 1 3 11 10 2 1 3 11 10 2 1 3 11 10 2 1 3 11
7 5 9 7 5 9 7 5 9 7 5 9
15 13 17 15 13 17 15 13 17 15 13 17
10
Check points
5. Troubleshooting
㪜㪈
11
㪜㪉
㪜㪊㪇㪉
㪜㪘㪪㪧
CP-X253(M1-20ED)
㪛㪊㪇㪊
㩿㪣㪘㪤㪧㪀
㪛㪊㪇㪉 㪪㪏㪇㪈
㪠㪪㪈㪌㪆㪠㪪㪈㪍 㩿㪫㪜㪤㪧㪀
㪠㪪㪈㪊㪆㪠㪪㪈㪋 㪛㪊㪇㪈
㩿㪧㪦㪮㪜㪩㪀
㪠㪪㪇㪉㪆㪠㪪㪇㪊
㪠㪪㪈㪈㪆㪠㪪㪈㪉
CP-X253(M1-20ED)
Are
voltage Measure
supplied at pins (7) resistance*
and (11) of E800 on the PWB NO between pins (7) and (11) of 0Ω
PWB assembly MAIN
assembly MAIN in standby E800.
mode?
Disconnect TSW
Open
from power unit circuit, and Termal switch (TSW)
measure resistance of
TSW.
Short
Are Mea-
voltage supplied sure resistance*
at pins (1) and (6) of E800 NO between pins (1) and (3), 0Ω
on the PWB assembly and between pins (4) and PWB assembly MAIN
MAIN in standby (7) of E800.
mode?
(1): +15V Power unit (circuit)
(3): GND(for +15V)
YES (6): +17V Open
(7): GND(for +17V)
Power unit (circuit)
Measure
resistance*
between pins (1) and Open
Lamp door
(2) of S801 when the
lamp door is
secure. Re-attach lamp
door
0Ω Re-attach PWB
assembly MAIN
PWB assembly MAIN
12
CP-X253(M1-20ED)
What
is the state of Light
LAMP indicator D303
during operation?
Is the NG
LAMP installation install the Lamp
correct?
Not light
YES
Is
the voltage
YES “L”=0V
at the (1) of
E804 on the PWB PWB assembly
assembly MAIN fixed MAIN
to "L" during
warming-
up?
NO “H”
No
Are
the voltage Measure
supplied to the pin What resistance of
NO (0V) Blinks Lights E1 and E2 after OK
(2) of connectors** for is the state of
DC fans soon after TEMP indicator disconnecting them
the button is D302? from MAIN
pressed? board.
PWB assembly
PWB assembly Not light MAIN
MAIN and blink
YES E1: 5 to 20kΩ
(5V or higher) E2: 0.5 to 2kΩ
NG(open/short)
Observe
the voltage Thermistor
Correct waveforms at pin (1) of Is the (E1/E2)
connectors for DC fans** voltage at the (3) of
YES
soon after the button E804 on the PWB assembly
is pressed. MAIN set to "L" during “L” = 0V
warming-up?
PWB assembly
PWB assembly MAIN
MAIN
incorrect No
f ≥ 40Hz
13
CP-X253(M1-20ED)
Are Confirm
the splash No NG
the LCD Panels
screen and the user menu CPC40 connector 54104/54132
connection to the MAIN
displayed correctly? board.
OK
YES
YES
Is the
picture from RGB No
out port displayed correctly PWB assembly MAIN
on another monitor
display?
SN74LVC1G125DCK
(IS15/IS16)
YES
EL8302IUZ
(IS02/IS03)
Is the
message of ”No SN74LVC1G125DCK
YES
input is detected on **” or (IS11/IS12)
“Sync is out of range on **” SN74LVC1G126DCK
displayed on the (IS13/IS14)
screen?
No
No sound
Disconnect
the speaker from the infinity
PWB assembly Main, and Speaker
measure its
resistance.
about 8
14
CP-X253(M1-20ED)
6. Service points
6-1 Lead free solder [CAUTION]
This product uses lead free solder (unleaded) to help preserve the environment. Please read these
instructions before attempting any soldering work.
CAUTION
Always wear safety glasses to prevent fumes or molten solder from getting into the eyes. Lead free solder
can splatter at high temperatures (600˚C).
Servicing solder
Solder with an alloy composition of Sn-3.0Ag-0.5Cu or Sn-0.7Cu is recommended.
Although servicing with leaded solder is possible, there are a few precautions that have to be taken. (Not
taking these precautions may cause the solder to not harden properly, and lead to consequent malfunctions.)
15
CP-X253(M1-20ED)
LCD/PRISM ASSY
WARNING
Wear sunglasses to protect your eyes when you maintain the projector with its lamp on.
1. Preparation
Please prepare cleaning tools and materials as follows. And prepare relatively clean room not to work in
additional dust, while removing operation.
(1) Swab for cleaning : P#: NX08061, "Cotton stick L147"
(2) Air duster (Dust blower, spray can)
(3) Vacuum cleaner
2. Disassemble and setting up.
(1) Turn off the projector, and unplug the power cord.
(2) Remove the lamp cover and upper case, according to the disassembling diagram of chapter 8.
(3) Unscrew the shield sheet and disconnect the LCD panel flexible cables.
(4) Unscrew PWB assembly MAIN to make it free.
(5) Press and hold the switch S801 using an insulator during maintenance.
(6) Keep the unscrewed wires away from all of electric parts.
16
CP-X253(M1-20ED)
3. Maintenance point
Panel
Actual formation
Separated formation
5. Re-assembly
(1) Turn off the set and unplug the power cord.
(2) Remove an insulator from S801.
(3) Screw down the PWB assembly MAIN and connect the LCD panel flexible cables to the PWB assembly MAIN.
(4) Re-assemble the set.
(5) While re-assembling, please clean the intake filter by using a vacuum cleaner.
17
CP-X253(M1-20ED)
WARNING
Always handle the batteries with care and use them only as directed. Improper use may result in battery
explosion, cracking or leakage, which could result in fire, injury and/or pollution of the surrounding environ-
ment.
●Be sure to use only the batteries specified. Do not use batteries of different types at the same time. Do
not mix a new battery with used one.
●Make sure the plus and minus terminals are correctly aligned when loading a battery.
●Keep a battery away from children and pets.
●Do not recharge, short circuit, solder or disassemble a battery.
●Do not allow a battery in a fire or water. Keep batteries in a dark. cool and dry place.
●If you observe a leakage of a battery, wipe out the flower and then replace a battery.
If the flower adheres your body or clothes, rinse well with water immediately.
The signal settings for the remote control transmitter and the projector's remote sensor can be changed. If
the remote control does not function properly try changing the signal setting.
Changing the signal setting for the remote control transmitter
(1) Setting 1 (FREQ. : NORMAL)
Simultaneously press and hold the MUTE and RESET buttons for about 3 seconds.
(2) Setting 2 (FREQ. : HIGH)
Simultaneously press and hold the MAGNIFY OFF and ESC buttons for about 3 seconds.
•Setting 1 is the factory default setting.
•When the batteries are removed from the remote control, user-specified settings are saved for about half a
day. If the batteries are removed from the remote control for longer than half a day, the remote will reset to
Setting 1.
Changing the signal setting for the projector's remote sensor
Switch between Setting 1 and 2 using the SERVICE/REMOTE FREQ. item found in OPTION MENU.
Use the ▲/▼ button to change the Projector's remote sensor setting.
1:NORMAL ↔ 2:HIGH
Items with a checkmark are on. The factory default setting is for both 1:NORMAL and 2:HIGH to be on. If
the remote control does not function correctly set this to either only 1 or only 2. Neither can be turned off
at the same time.
NOTE: The remote control will not function properly if the remote control transmitter settings and the projec-
tor's remote sensor settings are not the same.
18
CP-X253(M1-20ED)
Lift
Press
19
CP-X253(M1-20ED)
CAUTION
Use special caution not to injure the ML-A.
Press
Put both corners of the DUST Put the right and left edges of LAMP CLAP curves when passing Insert the under and curving part
PROOF GLASS into the ditch the LAMP CLAP into the right the spring of the LAMP CLAP. of the LAMP CLAP into the under
of the BOTTOM CASE. and left ditches of the BOTTOM Press the LAMP CLAP to below hole of the BOTTOM CASE.
CASE. pressing the bottom of the LAMP Press the LAMP CLAP until the
Press the LAMP CLAP to below CLAP. positioning part of the LAMP CLAP
while passing the right and left touches to the BOTTOM CASE.
edges through the ditches. Then springs pass the under side
of the ditches.
Hook the springs to the convex
parts of the BOTTOM CASE.
Make sure that the LAMP CLAP
is not removed when lifting it.
20
CP-X253(M1-20ED)
WARNING
►Before taking care of the air filter, make sure the power cable is not plugged in, then allow the projector
to cool sufficiently.
►Use only the air filter of the specified type. Do not use the projector without the air filter or the filter
cover. It could result in a fire or malfunction to the projector.
►Clean the air filter periodically. If the air filter becomes clogged by dust or the like, internal temperatures
rise and could cause a fire, a burn or malfunction to the projector.
NOTE
• Please reset the filter time only when you have cleaned or replaced the air filter, for a suitable indication
about the air filter.
• The projector may display the message such as “CHECK THE AIR FLOW” or turn off the projector, to prevent
the internal heat level rising.
21
CP-X253(M1-20ED)
6-7 Lamp
HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE
WARNING
►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or
burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different
lifetime, and some may burst or burn out soon after you start using them. In addition, when the bulb
bursts, it is possible for shards of glass to fly into the lamp housing, and for gas containing mercury to
escape from the projector's vent holes.
►About disposal of a lamp: This product contains a mercury lamp; do not put it in a trash. Dispose of it
in accordance with environmental laws.
• For lamp recycling, go to www.lamprecycle.org. (in the US)
• For product disposal, contact your local government agency or www.eiae.org (in the US) or www.epsc.ca
(in Canada).
• For more information, call your dealer.
• If the lamp should break (it will make a loud bang when it does), unplug the power cord from
the outlet, and make sure to request a replacement lamp from your local dealer. Note that
Disconnect shards of glass could damage the projector’s internals, or cause injury during handling, so
the plug from please do not try to clean the projector or replace the lamp yourself.
the power • If the lamp should break (it will make a loud bang when it does), ventilate the room well, and
outlet make sure not to breathe the gas that comes out of the projector vents, or get it in your eyes
or mouth.
• Before replacing the lamp, turn the projector off and unplug the power cord, then wait at
least 45 minutes for the lamp to cool sufficiently. Handling the lamp while hot can cause
burns, as well as damaging the lamp.
22
CP-X253(M1-20ED)
1. Turn the projector off, and unplug the power cord. The lamp cover
Allow the projector to cool for at least 45 minutes.
2. Prepare a new lamp.
If the projector is mounted on a ceiling, or if the lamp has broken,
also ask the dealer to replace the lamp.
3. Loosen the screw (marked by arrow) of the lamp cover and then
slide the lamp cover to the side to remove it.
4. Loosen the 2 screws (marked by arrow) of the lamp, and slowly
pick up the lamp by the handles.
It may make it easy to take the lamp out slightly toward the
control panel of the projector.
5. Insert the new lamp, and retighten firmly the 2 screws of the
lamp that are loosened in the previous process to lock it in place.
The handle
Tighten the screw 1 first, then screw 2 .
6. Slide the lamp cover back in place and firmly fasten the screw of
the lamp cover.
7. Turn the projector on and reset the lamp time using the LAMP
TIME item in the OPTION menu.
(1) Press the MENU button to display a menu.
(2) Point at the “Go to Advanced Menu …” in the menu using the
▼/▲ button, then press the ► button.
(3) Point at the “OPTION” in the left column of the menu using
the ▼/▲ button, then press the ► button.
(4) Point at the ”LAMP TIME” using ▼/▲ button, then press the
► button. A dialog will appear.
(5) Press the ▲ button to select “RESET” on the dialog.
It performs resetting the lamp time.
WARNING
►Do not touch any inner space of the projector, while the lamp is taken out.
NOTE
• Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp.
23
CP-X253(M1-20ED)
WARNING
Before caring, make sure the power switch is off and the power cable is not plugged in, and then allow the
projector to cool sufficiently. The care in a high temperature state of the projector could cause a burn and/
or malfunction to the projector.
Avoid wetting the projector or inserting liquids in the projector. It could result in a fire, an electric shock, and
and/or malfunction to the projector.
• Don’t put a container containing water , cleaner or chemicals near the projector.
• Don’t use aerosols or sprays.
CAUTION
Please take right care of the projector according to the following. Incorrect care could cause not only an
injury but adverse influence such as discoloration, peeling paint, etc.
• Do not use cleaner or chemicals other than those listed below.
• Do not polish or wipe with hard objects.
24
CP-X253(M1-20ED)
Note
1) The phenomenon at the failure of AUTO adjustment depends on resolution of input source, scene of pic-
ture etc.
2) There is no failure above in AUTO with video source through VIDEO, S-VIDEO or COMPONENT input. The
reason is why recognition of input signal’s standard does not need to search the capture range from input
signal itself.
25
CP-X253(M1-20ED)
64#05+6+10&'6'%61410
6JGRTQLGEVQTJCUDGGPVTCPUHGTTGF
HTQORTGXKQWUN[KPUVCNNGFRQUKVKQP
2+0$1:
+H[QWYKUJVQJCXGCUSWCTGKOCIG
QPUETGGPCICKP
FKUCDNG6TCPUKVKQP&GVGEVQTQP/GPW
5'%74+6;
'06'42#55914&
㪇㩷㩷㩷㪇㩷㩷㩷㪇㩷㩷㩷㪇
37+6 0':6
ENTER PASSWORD box
(2) Press the [Magnify off] button once, then press [Magnify off] button of remote for 3 second or more to dis-
play SERVICE PASSWORD box.
5'48+%'
'06'42#55914&
㪄㩷㩷㩷㪄㩷㩷㩷㪄㩷㩷㩷㪄
(3) Enter the Life Key (MENU, ▼, KEYSTONE, ▲). Then all security functions will be inactivated temporarily.
Note: • The Life key can be used up to 30 times. The key cannot be used thereafter. If the Life key cannot be
used, see the paragraph of SECURITY in the User’s Manual.
The frequency in which Life key is input will be set to 0 after the registered code is input.
• The SECURITY Menu can not be operated if the SECURITY PASSWORD was released by Life key.
• The Mirror, Keystone and Auto keystone are not memorized though they are possible to operate if
Transition Detector was released by Life key.
• The MyScreen Lock on SCREEN Menu keeps “TURN ON” if MyScreen PASSWORD was set when
SECURITY PASSWORD was released by Life key.
26
CP-X253(M1-20ED)
PIN BOX
2. Send HITACHI sales company the Inquiring code (10 digits) to inquire the correct PIN code.
3. With the PIN BOX menu displayed, input the correct PIN code. Enter the correct PIN CODE that HITACHI
sales company informed.
4. Open menu and select “TURN OFF” from the PIN LOCK items in the SECURITY menu. Then the PIN
BOX menu appears.
Password is required to display the Security Menu.
See the Security in OPTION menu: User’s Manual - Operating Guide.
5. Input the correct PIN code in the PIN BOX menu.
6. And then, PIN LOCK will be set to “TURN OFF”.
7.Inactivate the MyScreen PASSWORD and Transition Detector too.
And reset the Security Password to the [2805].
See the Security in OPTION menu: User’s Manual - Operating Guide.
27
CP-X253(M1-20ED)
Message Description
NO INPUT IS DETECTED There is no input signal.
*** Please confirm the signal input connection, and the status of the signal source.
SYNC IS OUT OF RANGE The horizontal or vertical frequency of the inputted signal is outside of the
*** response parameters of this unit.
fH *****kHz fV *****Hz Please confirm the specs for this unit or the signal source specs.
The internal portion temperature is rising.
Please turn the power OFF, and allow the unit to cool down at least 20 minutes.
After having confirmed the following items, please turn the power ON again.
• Is there blockage of the air passage aperture?
CHECK THE AIR FLOW • Is the air filter dirty?
• Does the peripheral temperature exceed 35°C?
If the same indication is displayed after the remedy, please set FAN SPEED of the
SERVICE item in the OPTION menu to HIGH.
REMINDER A note of precaution when cleaning the air filter.
***HRS PASSED AFTER THE Please immediately turn the power OFF, and clean or change the air filter by
LAST FILTER CHECK.
FILTER MAINTENANCE IS ESSENTIAL
referring to the “Air Filter” section of this manual. After you have cleaned or
TO REMOVE WARNING MESSAGE, changed the air filter, please be sure to reset the filter timer.
RESET FILTER TIMER.
28
CP-X253(M1-20ED)
NOTE • When the interior portion has become overheated, for safety purposes, the power source is automati-
cally turned off, and the indicator lamps may also be turned off. In such a case, press the “○” (OFF) side of the
power switch, and wait at least 45 minutes. After the projector has sufficiently cooled down, please make con-
firmation of the attachment state of the lamp and lamp cover, and then turn the power on again.
29
CP-X253(M1-20ED)
AIR - SENSOR
Execute this item to adjust the air sensor.
LAMP ALARM
Select the lamp alarm level. 3 Level ↔ 1 Level ↔ None
STARTUP TYPE
Select the startup screen type. 1 : shows Hitachi Logo
2 : No Hitachi Logo
SOFT RESET
If this is executed, all of the user data is initialized.Never use it when not required.
RUN TIME
LAMP 1234 h Lamp time
NORMAL 1000 h Lamp time(Normal)
WHISPER 234 h Lamp time(Whisper)
AC 2000 h AC energizing time
On 1 Number of times on
Off 0 Number of times off
30
9KTTKPIQHVJGEKTEWKVRQYGTUWRRN[
Area of Importance
(1) Attach the CNPOW, TSW and FE1. The operations with this symbol have implications
Attach the CNSH. with laws/standards. It is possible to be in violation
of these laws/standards in the case that these operation
are not carried out according to the instructions.
Assemble according to the operation instructions.
7. Wiring diagram
31
659
%0
CP-X253(M1-20ED)
/CMGUWTGVQEQPHKTOVJGRTKPVQHVJG659
%0 Area of Importance
ޟYS11A100A-**ޠ㧔100͠㧕
Wiring diagram 1
9KTKPIQHVJGRCPGNFWEV
㧔㧕#VVCEJVJGQWVUGPUQTVQVJGRCPGNFWEVYKVJVCRG
32
CP-X253(M1-20ED)
$QVVQOQHVJGFWEV 7RRGTUKFGQHVJGFWEV
QWV
UGPUQT
Wiring diagram 2
Wiring of the bottom case
㧔㧕#VVCEJVJGGZJCWUVHCPURGCMGTCPFCKTUGPUQT
URGCMGT
FGITGGU
6WTPVJG5QNFGTKPIRQKPVVQVJGHTQPVQH
VJGRTQLGEVQT
CDQWVFGITGGU
33
CP-X253(M1-20ED)
<62
/CMGUWTGPQVVQRKPEJVJGECDNGVQVJG
DQVVQOECUGTKD
#KT
UGPUQT
2WVVJGVQRQHVJGCKTUGPUQTQPVJGDQVVQOECUGTKD
6WTPVJGVQRQHVJGCKTUGPUQTVQVJGHTQPVQHVJG
RTQLGEVQT
(KZVJGECDNGYKVJVCRG㧔L=20mm㧕.
Wiring diagram 3
9KTKPIQHVJGRCPGNFWEVCUUGODNKPI
㧔㧕(KZVJGNCORHCPECDNGYKVJVCRG
#VVCEJVJGNCORHCPECDNG
34
$QUU VQVJGWRRGTUKFGQHVJGFWEV
absorbing the excessive length with
tape㧔L=20mm㧕.
/CMGUWTGPQVVQRCUUVJGNCORHCP
'ZJCWUV4KD ECDNGQXGTVJGDQUUQTVJGGZJCWUV4KD
CP-X253(M1-20ED)
&QVVGFNKPGRCTV
<62
Wiring diagram 4
%QPPGEVVJG659VQVJG%0QHRQYGTWPKV
EKTEWKV
Wiring of the engine and power unit assembling #VVCEJVJG659VQVJGKPUWNCVKQPUGCVQH
$CNNCUVYKVJVYQVCRGUVQUGRCTCVGHTQO <62
(1)Connect the TSW cable and fix it with tape. VJG(#0
.OO㧕
5V[NGVJGKIPKVGTECDNG
'ZJCWUV HCP
35
%0 659
CP-X253(M1-20ED)
9TCRVJGGZJCWUVHCPECDNGVQVJG%0219ECDNGCV
%0219 (' VJGWPFGTQH('VKOGU
2CUUVJG659ECDNGCPFVJGDCNNCUVKIPKVGTECDNG
KPUKFGQHVJGNCORJQWUGDQUU
/CMGUWTGPQVVQRWVVJG659ECDNGCPFVJGDCNNCUVKIPKVGT
ECDNGWPFGTVJGNCORJQWUGYJGPCUUGODNKPIVJGRTQLGEVQT
/CMGUWTGVJCVVJG659ECDNGCPFVJGDCNNCUVKIPKVGTECDNG
FQPQVVQWEJVQVJGUNKVQHVJGGZJCWUVHCP
5V[NGVJGDCNNCUVKIPKVGTECDNGNKMGTKIJVFKCITCO
/CMGUWTGPQVVQRCUUVJTQWIJQXGTVJGDQUU
2CUUVJGECDNGWPFGTVJGVYQNCORJQWUGTKDU
Wiring diagram 5
9KTKPIQHVJGOCKPDQCTFCUUGODNKPI
㧔㧕.KHVVJGOCKPDQCTFVJGPEQPPGEVVJG%0219HKTUV
%QPPGEVVJGGZJCWUVHCP$RCPGNHCPCKTUGPUQTDCNNCUVECDNGCPF%04/PGZV
CKT
UGPUQT
'ZJCWUV
HCP
36
$CNNCUV
ECDNG
CP-X253(M1-20ED)
Wiring diagram 6
9KTKPIQHVJGOCKPDQCTFCUUGODNKPI
㧔㧕%QPPGEVVJGRCPGNHNGZKDNGECDNG
㧔㧕%QPPGEVVJGURGCMGTNCORHCP4)HCPCPFQWVUGPUQT /CMGUWTGPQVVQRCUUVJGDCNNCUVECDNG
QPVJKUUETGY
㧔㧕%QPPGEVVJG%05* 1VJGTYKUGVJGDCNNCUVECDNGKURKPEJGF
D[VJGWRRGTECUGDQUU
%QPPGEVQWVUGPUQTCPF
4)HCPDGHQTGVKIJVGP QWV
VYQUETGYUQHOCKP UGPUQT
DQCTF
1VJGTYKUG+VKUJCTF
VQKPUGTVVJGEQPPGEVQT 4)
HCP
UETGY
UETGY
'
37
NCOR
HCP
CP-X253(M1-20ED)
URGCMGT
Wiring diagram 7
9KTKPIQHVJGOCKPDQCTFCUUGODNKPI
㧔㧕9KTKPIQHVJGURGCMGTNCORHCPCPFQWVUGPUQT
38
CP-X253(M1-20ED)
NCOR URGCMGT
HCP
Wiring diagram 8
9KTKPIQHVJG/#+0DQCTFCPFVJG+0276DQCTF
%QORNGVGVJKURTQEGFWTGDGHQTGCVVCEJKPIVJG/#+0DQCTF
%QPPGEVKQPQHVJG+0276DQCTF
%0
%0+02 +0276DQCTF
+PUGTVVJG%0VQVJG+0276DQCTFDGHQTGCVVCEJKPI
VJG%0VQVJG+1OGVCN
+PUGTVVJG%0+02CPFNQEMKV
㧔㧕9KTKPIQHVJG+0276DQCTFCPFVJG/#+0DQCTF
9KTGVJG%0+02CPF%0CUDGNQYFKCITCO
%0
39
%QPPGEVVJG%0VQVJG
/#+0DQCTF
/KPKOK\GVJGQXGTHNQYHTQO
/#+0DQCTFGFIG
CP-X253(M1-20ED)
+0276DQCTF
%0+02
2WUJVJG%0VQKPUKFG +PUGTVVJG%0+02CPFNQEMKV
2WVVJG%0+02WPFGTVJG+0276DQCTFCUCDQXG
FKCITCO
2TGXGPVKQPQHVJGQXGTHNQYVQVJGHTQPV
/#+0DQCTF
#DUQTDVJGGZEGUUKXGNGPIVJQHVJG
%0RWUJKPIKVVQKPUKFG
Wiring diagram 9
CP-X253(M1-20ED)
40
CP-X253(M1-20ED)
41
CP-X253(M1-20ED)
Notice
1. The step of the disassembly / The step of the assembly.
Disassemble the projector in order of 1, 2, 3, 4, 5, 6 and 7 as shown in the diagram.
Assemble the projector in order of 7, 6, 5, 4, 3, 2, and 1 as shown in the diagram.
42
CP-X253(M1-20ED)
Notice
2. Detach and attach the upper case.
Follow the procedure below to detach and attach the upper case.
When disassembling
CAUTION
The lamp door must be removed before the upper case when disassembling the machine. If the upper
case is detached with the lamp door installed, the MAIN board might be damaged.
Lamp door
b. Remove 7screws on the bottom and 2 screws on the rear to detach the upper case.
5 4 3
6
2
1
7
2 screws
7 screws
b'. Tighten screws in order of 1, 2, 3, 4, 5, 6 and 7 as shown in the diagram when assembling.
43
CP-X253(M1-20ED)
CAUTION
When detaching the upper case.
Detach the circle point side first. Otherwise, upper case will be damaged.
Make sure not to damage the upper case ribs (square pointed).
Make sure not to touch reverse side of main board.
CAUTION
When attaching the upper case.
Attach the triangle point side first. Make sure not to touch any parts of main board.
Make sure not to damage the upper case ribs (square pointed).
44
CP-X253(M1-20ED)
When assembling
a. Tighten 7 screws on the bottom and 3 screws on the rear after attaching the upper case with the lamp door
separated.
In order not to make a gap between the upper and the bottom cases, tighten these screws while pressing
down the upper case in the direction of the arrow. Be careful not to bend the outside casing. (Torque:0.39-
0.59N•m)
Lamp door
CAUTION
Tighten this screw using a manual screwdriver.
Push
UP keep
33
45
CP-X253(M1-20ED)
When assembling
(1) Put the thermistor in the correct position on the bottom case and fasten its wire with tape as shown in the
diagram.
(2) Be careful not to put the lamp fan wires between the panel fan duct assembly and the bottom case in attach-
ing the panel fan duct assembly.
46
CP-X253(M1-20ED)
CAUTION
Prepare the filter cover for bottom-up use for attaching.
Attach the optics unit in the level place. 3
1
Change the filter cover to the filter cover for bottom-up use to prevent the
bending of the bottom case.
Re-change the filter cover after you attached optics unit.
M2 x 8 (3pieces)
6. Replacing the LCD/PRISM assembly 2
1
3
Note:
You can remove the LCD/PRISM ASSY without detaching the optics
unit from bottom case.
CAUTION
Please don’t LCD PANEL contact with other parts.
Please install new LCD/PRSM ASSY into the DICROIC OPTICS UNIT vertically to avoid the possibility that
the positioning boss cracks. Note that LCD PANEL don’t come in contact with other parts when you install it.
Please tighten up a screw (M2x8) in order of 1→2→3.
Push the LCD/PRISM ASSY to the Lens side when tighten the screws.
Otherwise, Focus might be not suitable.
reference : at tightening torque 0.15~0.3N•m.
M2 x 8 (4 pieces)
M2 Low NUT
LENS ASSY
47
CP-X253(M1-20ED)
Note:
Use the suitable screw for each screw holes when attaching the main board.
Note:
(1) Make sure to fit the concave part of the air filter to the convex part of the filter case.
(2) Hook the air filter to the 8 hooks of the filter case.
48
CP-X253(M1-20ED)
CAUTION
When replacing the lamp unit, never detach the three springs.
Otherwise, it will be impossible to reuse the lamp unit.
Lamp unit
Note:
When detaching the lamp unit, detach the connector side first.
Next, lift and detach the lamp unit inclining the lamp unit.
(The connector side is up, and the lens side is down)
This is easy way to detach the lamp unit.
connector
Lens
control button
49
CP-X253(M1-20ED)
Lead
2) Stick two pieces of the Fan cushion A to upper corners of the fan.
Fan cushion A
stick to the
bottom first.
Fan cushion C
50
CP-X253(M1-20ED)
a. Make sure the contens of new control button assembly (P#: PC07081)
Control button ....................................1pcs
Cushion A ..........................................1pcs
Cushion B ..........................................3pcs
Cushion B
31
51
CP-X253(M1-20ED)
cushion A
(32)
52
CP-X253(M1-20ED)
CP-X253
SYMBOL PARTS SYMBOL PARTS
NO. NO. DESCRIPTION NO. NO. DESCRIPTION
1 QD53072 U_CASE ASSY X253 26 2722448 FUSE 6.3A
2 PC07081 CONT BUTTON M1 ASSY 27 GK01352 SPEAKER 36M ZH2P 051(2)
3 QD53092 LAMP DOOR ASS’Y X253 28 FH00401 THERMAL SW ASSY
4 QD53122 B_CASE ASSY X253 (3) 29 UX27141 M1-20 LCD/PRISM ASS’Y(SERVICE or REPAIR)
5 QJ03661 FOOT RUBBER M1 30 DT00781 M1-20 LAMP UNIT ASS’Y
6 QJ02541 ADJUST FOOT M1 31 MS01582 SP RING CUSHION M1(2)
7 QD53171 FILTER COVER S M1 32 MU04391 SP CUSHION M1 ASSY(3)
8 NJ23652 FILTER COV R ASSY M1 33 MU04381 P.UNIT CUSHION M1 ASY(4)
9 PH39931 LENS CAP B M1 34 JP54812 M1-20ED INP.ASY S
10 MJ02872 D-SUB SCREW 35 CK39802R EL8302IUZ-T7
11 MU03602 FILTER M1 36 CK38328R SN74LVC1G125DCKR
12 MS01611 DC FAN CUSHION ASSY (1) 37 CK38329R SN74LVC1G126DCKR
13 AZ00257 THERMISTOR 180
14 AZ00943 THERMISTOR 150-102-131 QT49851 INSTRUCTION MANUAL SASSY
15 GS01401 DC FAN SF6023LH HL02224 REMOTE CONTROL UNIT R003
16 GS01391 DC FAN SF6023RH EV02131 POWER SUPPLY CORD(US TYPE) W/CORE *
17 GS01411 DC FAN D06T (1) EV02141 POWER SUPPLY CORD(EUROPE TYPE) W/CORE **
18 GS01252 DC FAN BM5115 EV02151 POWER SUPPLY CORD(UK TYPE) W/CORE **
19 UX27131 M1-20 DICHROIC OPTICS UNIT EW06661 RGB-D CABLE(15PIN MALE TO 15PIN MALE)
20 JP55641 M1-20 ED PWB ASS’Y MAIN H-S NX08061 COTTON STICK L147
21 JP53991 M1-20 ED REM. ASY S NX05742 COTTON STICK L70
22 EA02264R CPC40 CONNECTOR 54104 EW08211 COEV/A CABLE W/CORE
23 EA02317R CPC40 CONNECTOR 54132 EW08791 COE RCA-STEREO 220
24 HA01972 M1-20 POWER UNIT (4)
25 KQ04932 M1 PJ LENS(SERVICE)
(1) Purchase the DC FAN CUSHION ASSY (MS01611) when you replace the DC FAN D06T (GS01411).
(2) Purchase the SP RING CUSHION M1 (MS01582) when you replace the SPEAKER 36M ZH2P 051 (GK01352).
(3) Purchase the SP CUSHION M1 ASSY (MU04391) when you replace the B_CASE ASSY X253 (QD53122).
(4) Purchase the P.UNIT CUSHION M1 ASSY (MU04381) when you replace the M1-20 POWER UNIT (HA01972).
* For CP-X253UF ** For CP-X253EF
COMPUTER/
VIDEO STORAGE SEARCH
MAGNIFY
HOME PAGE UP VOLUME
ON
POSITION MENU
ENTER
ESC RESET
53
CP-X253(M1-20ED)
9 8 7 6 1 2 3 4 5
5 4 3 2 1 6 7 8 9
RS-232C
CONTROL port cable(Cross) RS-232C port
of the projector of a computer
- (1) (1) CD
RD (2) (2) RD
TD (3) (3) TD
- (4) (4) DTR
GND (5) (5) GND
- (6) (6) DSR
RTS (7) (7) RTS
CTS (8) (8) DTS
- (9) (9) RI
Communications setting
19200 bps, 8N1
1. Protocol
Consist of header (7 bytes) + Command data (6 bytes)
2. Header
BE + EF + 03 + 06 + 00 + CRC_low + CRC_high
CRC_low: Lower byte of CRC flag for command data
CRC_high: Upper byte of CRC flag for command data
3. Command Data
Command Data Chart
byte_0 byte_1 byte_2 byte_3 byte_4 byte_5
Action Type Setting code
low high low high low high
Action (byte_0 - 1)
Action Classification Content
1 Set Change setting to desired value.
2 Get Read projector internal setup value.
4 Increment Increment setup value by 1.
5 Decrement Decrement setup value by 1.
6 Execute Run a command.
54
CP-X253(M1-20ED)
NOTE • Operation cannot be guaranteed when the projector receives an undefined command or data.
• Provide an interval of at least 40ms between the response code and any other code.
• The projector outputs test data when the power supply is switched ON, and when the lamp is lit. Ignore this data.
• Commands are not accepted during warm-up.
55
CP-X253(M1-20ED)
Command Data
Names Operation Type Header
CRC Action Type Setting Code
56
CP-X253(M1-20ED)
Command Data
Names Operation Type Header
CRC Action Type Setting Code
57
CP-X253(M1-20ED)
Command Data
Names Operation Type Header
CRC Action Type Setting Code
COLOR Get BE EF 03 06 00 B5 72 02 00 02 22 00 00
Increment BE EF 03 06 00 D3 72 04 00 02 22 00 00
Decrement BE EF 03 06 00 02 73 05 00 02 22 00 00
COLOR Reset Execute BE EF 03 06 00 80 D0 06 00 0A 70 00 00
TINT Get BE EF 03 06 00 49 73 02 00 03 22 00 00
Increment BE EF 03 06 00 2F 73 04 00 03 22 00 00
Decrement BE EF 03 06 00 FE 72 05 00 03 22 00 00
TINT Reset Execute BE EF 03 06 00 7C D1 06 00 0B 70 00 00
SHARPNESS Get BE EF 03 06 00 F1 72 02 00 01 22 00 00
Increment BE EF 03 06 00 97 72 04 00 01 22 00 00
Decrement BE EF 03 06 00 46 73 05 00 01 22 00 00
SHARPNESS Reset Execute BE EF 03 06 00 C4 D0 06 00 09 70 00 00
MY MEMORY Load Set 1 BE EF 03 06 00 0E D7 01 00 14 20 00 00
2 BE EF 03 06 00 9E D6 01 00 14 20 01 00
3 BE EF 03 06 00 6E D6 01 00 14 20 02 00
4 BE EF 03 06 00 FE D7 01 00 14 20 03 00
MY MEMORY Save Set 1 BE EF 03 06 00 F2 D6 01 00 15 20 00 00
2 BE EF 03 06 00 62 D7 01 00 15 20 01 00
3 BE EF 03 06 00 92 D7 01 00 15 20 02 00
4 BE EF 03 06 00 02 D6 01 00 15 20 03 00
PROGRESSIVE Set TURN OFF BE EF 03 06 00 4A 72 01 00 07 22 00 00
TV BE EF 03 06 00 DA 73 01 00 07 22 01 00
FILM BE EF 03 06 00 2A 73 01 00 07 22 02 00
Get BE EF 03 06 00 79 72 02 00 07 22 00 00
VIDEO NR Set LOW BE EF 03 06 00 26 72 01 00 06 22 01 00
MID BE EF 03 06 00 D6 72 01 00 06 22 02 00
HIGH BE EF 03 06 00 46 73 01 00 06 22 03 00
Get BE EF 03 06 00 85 73 02 00 06 22 00 00
58
CP-X253(M1-20ED)
Command Data
Names Operation Type Header
CRC Action Type Setting Code
59
CP-X253(M1-20ED)
Command Data
Names Operation Type Header
CRC Action Type Setting Code
60
CP-X253(M1-20ED)
Command Data
Names Operation Type Header
CRC Action Type Setting Code
61
CP-X253(M1-20ED)
Command Data
Names Operation Type Header
CRC Action Type Setting Code
62
CP-X253(M1-20ED)
Command Data
Names Operation Type Header
CRC Action Type Setting Code
63
㪤㪘㪠㪥㩷㪧㪮㪙
㪝㫃㪸㫊㪿㩷㪩㪦㪤 㪈㪉㪏㪢
㪛㪛㪚
㪈㪍㪤㪹㫀㫋 㪜㪜㪧㪩㪦㪤
㪩㪞㪙㩷㫀㫅㪈 㪍㪻㪙㩷㪘㪤㪧 㪚㪦㪥㪫㪩㪦㪣
㪙㪬㪫㪫㪦㪥
㪩㪞㪙䇭㫀㫅㪉 㪍㪻㪙㩷㪘㪤㪧
11. Block diagram
㪚㪦㪣㪦㪩
㪬㪥㪠㪝㪦㪩㪤㪠㪫㪰㪃 S䋯H
㪫㪠㪤㪠㪥㪞 㪚㪯㪘㪎㪇㪇㪎 㪇㪅㪍㪊㩹
A/D converter
㪞㪜㪥㪜㪩㪘㪫㪦㪩㪃 㪯㪞㪘㩷㪧㪘㪥㪜㪣
Video decoder 㪞㪘㪤㪤㪘
㪠㫄㪸㪾㪼㪶㪧㪩㪦㪚㪜㪪㪪㪦㪩 㪚㪦㪩㪩㪜㪚㪫㪠㪦㪥
㪚㫊㩷㪭㫀㪻㪼㫆
㪤㪘㪠㪥㩷㪚㪧㪬 㪚㪯㪛㪊㪌㪋㪇
㪪㪄㪭㫀㪻㪼㫆
㪧㪮㪈㪐㪇
㪩㪼㫊㪼㫋㪪㪮 㪭㫆㫃㪅㩷㪚㫆㫅㫋
㫎㫀㫋㪿㩷㪪㪮
64
㪘㫌㪻㫀㫆㩷㫀㫅㪈
㪘㫌㪻㫀㫆㩷㫀㫅㪉 㪙㪛㪊㪏㪎㪇 䌄䌃㩷䌐䌏䌗䌅䌒
䌒䌅䌇䌕䌒䌁䌔䌏䌒 㪜㫏㪿㪸㫌㫊㫋
㪣㪸㫄㫇㩷㫊㫀㫉㫆㪺㪺㫆
㪩㪼㫄㫆㫋㪼 㪪㪮 㪝㪘㪥 㪧㪸㫅㪼㫃㩷㫊㫀㫉㫆㪺㪺㫆
㪤㫆㫌㫊㪼 㪪㪮 㪝㪘㪥
㪬㪪㪙
CP-X253(M1-20ED)
㪫㪜㪤㪧
㪪㪜㪥㪪㪦㪩
㪣㪸㫄㫇
Block diagram
CP-X253(M1-20ED)
㪣㪚㪛㩷㪧㪘㪥㪜㪣㩷㪩㪆㪞㪆㪙
㪈㪇 㪭㪠㪛㪎 㪈㪇
㪘㪬㪛㪠㪦 㪈㪈 㪭㪠㪛㪏 㪈㪈
㪄㪠㪥㪉 㪈㪉 㪭㪠㪛㪐 㪈㪉 㪜㪏㪇㪍
㪈㪊 㪭㪠㪛㪈㪇 㪈㪊 㪈 㪝㪘㪥㪊㪪 㩷㩷㪝㪘㪥
㪬㪪㪙㪄㪙 㪈㪋 㪭㪠㪛㪈㪈 㪈㪋 㪉 㪭㪚㪚 㩷㩷㩿㪣㪘㪤㪧㪀
㪜㪢㪇㪈 㪘㪚㪦㪥㪶㪬㪙㪩㪉㪊 㪈㪌 㪭㪠㪛㪈㪉 㪈㪌 㪊 㪞㪥㪛
㪈㪍 㪟㪭㪛㪛 㪈㪍 㪤㫆㫃㪼㫏㪶㪌㪇㪈㪌㪍㪏
㪈㪎 㪛㪚㪣㪢㪉 㪈㪎
㪈㪏 㪆㪛㪚㪣㪢㪉 㪈㪏
㪈㪐 㪆㪛㪚㪣㪢㪈 㪈㪐 㪜㪏㪇㪎
㪉㪇 㪛㪚㪣㪢㪈 㪉㪇 㪈 㪝㪘㪥㪋㪪
㪉㪈 㪟㪚㪢㪈 㪉㪈 㪉 㪭㪚㪚 㩷㩷㪝㪘㪥
㪉㪉 㪟㪚㪢㪉 㪉㪉 㪊 㪞㪥㪛 㩷㩿㪙㩷㪧㪘㪥㪜㪣㪀
㪣㪘㪤㪧㩷㪛㪦㪦㪩㩷㪪㪮 㪉㪊 㪟㪪㪫 㪉㪊 㪡㪪㪫㪶㪪㪟
㪪㪏㪇㪈 㪧㪘㪥㪘㪶㪜㪪㪜㪈㪈㪤㪟㪉㪫 㪉㪋 㪟㪭㪪㪪 㪉㪋
㪉㪌 㪭㪪㪪㪞 㪉㪌
㪉㪍 㪭㪭㪪㪪 㪉㪍
㪉㪎 㪜 㪥㪙 㪉㪎 㪜 㪊 㪇㪋 㪜㪉
㪜㪫㪇㪋 㪚㪥㪠㪥 㪜㪪㪈㪈 㪉㪏 㪭 㪚㪢 㪉㪏 㪈 㪭 㪚㪚 㩷㩷㪫㪜㪤㪧㩷㪪㪜㪥㪪㪦㪩
㪘㪬㪛㪠㪦 㪜㪘㪇㪈 㪈 㪘㪧㪦㪩 㪈 㪉㪐 㪭㪪㪫 㪉㪐 㪉 㪦㪬㪫 㩷㩷㩿㪦㪬㪫㪪㪠㪛㪜㪀
㪄㪦㪬㪫 㪉 㪘㪧㪦㪞 㪉 㪊㪇 㪛㪮㪥 㪊㪇 㪡㪪㪫㪶㪱㪟
㪧㪮㪙 㪊 㪘㪧㪦㪙 㪊 㪊㪈 㪛㪠㪥 㪊㪈
㪸㫊㫊㪼㫄㪹㫃㫐
㪋 㪞㪥㪛 㪋 㪊㪉 㪧㪚㪞 㪊㪉
㪠㪥㪧㪬㪫
㪌 㪘㪧㪟㪊 㪌 㪊㪊 㪫㪜㪪㪫㪈 㪊㪊
㪍 㪘㪧㪭㪊 㪍 㪊㪋 㪫㪜㪪㪫㪉 㪊㪋
㪎 㪞㪥㪛 㪎 㪊㪌 㪩㪞㪫 㪊㪌
㪩㪞㪙㪄㪦㪬㪫 㪏 㪘㪧㪣㪦㪦 㪏 㪊㪍 㪪㪦㪬㪫 㪊㪍
㪜㪘㪇㪈 㪐 㪘㪧㪣㪦㪠 㪐 㪊㪎 㪭㪭㪛㪛 㪊㪎
㪈㪇 㪞㪥㪛 㪈㪇 㪊㪏 㪭㪅㪚㪦㪤㪣 㪊㪏 㪜㪊㪇㪉 㪜㪈
㪈㪈 㪘㪧㪩㪦㪠 㪈㪈 㪊㪐 㪞㪚㪝㪙 㪊㪐 㪈 㪦㪬㪫 㩷㩷㪘㪠㪩㩷㪪㪧㪛㪅㩷㪪㪜㪥㪪㪅
㪚21752/ 㪈㪉 㪘㪧㪩㪦㪦 㪈㪉 㪋㪇 㪥㪅㪚㪅 㪋㪇 㪉 㪞㪥㪛
㪜㪘㪇㪈 㪈㪊 㪄 㪈㪊 㪡㪪㪫㪶㪱㪟
㪈㪋 㪄 㪈㪋
㪤㫆㫃㪼㫏㩷㪶㪌㪇㪈㪌㪍㪏 㪤㫆㫃㪼㫏㩷㪶㪌㪇㪈㪊㪊㪈 㪜㪏㪇㪎 㪚㪥㪩㪤
㪜㪫㪇㪌 㪚㪥㪉㪊 㪜㪢㪌㪈 㪈 㪞㪥㪛 㪈 㪩㪚㩷㪧㪮㪙
㪈 㪩㫏 㪈 㪉 㪩㪜㪤㪦㪫㪜㪈 㪉
㪉 㪫㫏 㪉 㪊 㪭㪚㪚 㪊
㪊 㪂㪌㪭 㪊 㪋 㪩㪜㪤㪦㪫㪜㪉 㪋
㪋 㪞㪥㪛 㪋 㪤㫆㫃㪼㫏㩷㪶㪌㪇㪈㪌㪍㪏 㪤㫆㫃㪼㫏㩷㪶㪌㪇㪈㪌㪍㪏
㪡㪪㪫㪶㪪㪟 㪡㪪㪫㪶㪪㪟
㪡㪪㪫㪶㪱㪟 㪡㪪㪫㪶㪧㪟㪛
㩷㪜㪏㪇㪋 㪜㪏㪇㪇
㪈 㪉 㪊 㪋 㪈 㪉 㪊 㪋 㪌 㪍 㪎 㪏 㪐 㪈㪇 㪈㪈 㪈㪉
㪘㪬㪛㪠㪦㪅㪞㪥㪛
㪣㪘㪤㪧㪅㪤㪠㪪㪪
㪧㪶㪦㪥㪆㪦㪝㪝
㪝㪘㪥㩷㪞㪥㪛
㪝㪘㪥㩷㪞㪥㪛
㪚㪥㪧㪦㪮
㪘㪚㪫㪠㪭㪜
㪪㪠㪣㪜㪥㪫
㪂㪍㪅㪍㪭
㪂㪍㪅㪍㪭
㪂㪈㪌㪭
㪂㪈㪌㪭
㪂㪈㪎㪭
㪞㪥㪛
㪞㪥㪛
㪞㪥㪛
㪞㪥㪛
㪈 㪉 㪊 㪋 㪈 㪉 㪊 㪋 㪌 㪍 㪎 㪏 㪐 㪈㪇 㪈㪈 㪈㪉
㩷㩷㪚㪥㪈㪇㪉
㪚㪥㪈㪇㪈 㪚㪥㪈㪇㪈
㪈 㪦㪬㪫㪂 㪈 㪈 㪛㪚㩷㪠㪥㪂 㪈 㪧㪦㪮㪜㪩㩷㪬㪥㪠㪫 㪚㪥㪈㪇㪊 㪚㪥㪫㪪
㪉 㪦㪬㪫㪄 㪉 㪉 㪥㪚 㪉 㩿㪚㪠㪩㪚㪬㪠㪫㪀 㪈 㪫㪜㪤㪧㩷㪦㪬㪫 㩷㪣㪘㪤㪧㩷㪫㪜㪤㪧
㪪㪤㪢 㪊 㪛㪚㩷㪠㪥㪄 㪊 㪉 㪫㪜㪤㪧㩷㪩㪜㪫㪬㪩㪥 㩷㪪㪮㪠㪫㪚㪟
㪋 㪂㪈㪎㪭 㪋
㪣㪘㪤㪧㩷㪬㪥㪠㪫 䇭㪧㪦㪮㪜㪩
㪸㫊㫊㪼㫄㪹㫃㫐 䇭㪬㪥㪠㪫
䇭㩿㪙㪘㪣㪣㪘㪪㪫㪀
㪚㪥㪈
㪘㪚㩷㪠㪥㪣㪜㪫
65
CP-X253(M1-20ED)
13. Basic circuit diagram Parts with hatching are not mounted.
CONFIDENTIAL
6 6
UP DOWN
56.9KHz
I002 I001
KSM-2003LM2EL KSM-2003LM2EL
C012 C002
1 2 1 2
100p-C 100p-C
1005 C011 1005 C001
1 2 1 2
1.0/10 1.0/10
R003
1 0 2
1005
4 4
1 100 2
1 100 2
47 2
MVK/SKV
47/6.3
1
R012
1005
R002
1005
R001
2125
C003
2
1
1
APRC01
1
APRC02
1
3 APRC03
1
3
APRC04
501568-04H
1
4
E002
G1
G2
REMOTE1
GND
REMOTE2
+5V VCC
2 2
PWB assembly REMOTE (M1-20ED)
1 1
A B C D E
66
CP-X253(M1-20ED)
CONFIDENTIAL
6 6
ET01
3114-15FABNS1XN
15 G2 5
SCL GND
10
V SYNC
14 GND 4
5 VCLK
9 5
PLUG
13 3
B
H GND B
8
ET04
12 2 501568-14H
G/Y
SDA GND G/Y 1
7
2
11 1
R
GND R 3
6
G1 4
ET02 7
3175-09M G1
1 8
4 6 9
4
RD
2 10
7 11
TD
3 12
RT11
8 1 0 2 13
RT12 1005
4 1 0 2 14
1005
9 ET05
G1
RT01 SH-04H
G2
5 1 0 2 1 RX
RT02
1.0/10
2
0 2
CT04
G2 IT01 1 2 TX
DS14C232CM RT03
1
1 0 2 3 +5V
1 C1+ VCC 16
RT04
1.0/10
2
0 2
CT03
ET03 1 4 GND
2 V+ GND 15
3
JY-3542*01-250
3
1
3 Dout1
3 C1- 14 G1
5
G2
4 Rin1
C2+
1.0/16
4 13
2
CT02
2
Rout1
1
5 C2- 12
1
Din1
6 V- 11
RT08 RT05
1 100 2 Dout2 Din2 1 100 2
7 10
RT09 1005 1005 RT06
1 100 2 Rin2 Rout2 1 2.2K 2
8 9
1005 1005
1 3.3K 2
1.0/16
2
CT01
RT07
1005
1
GND1
GND1
2 2
1 1
A B C D E
67
CP-X253(M1-20ED)
MEMO
68
CONFIDENTIAL
6 6
5 5
4 4
3 3
2 2
1 1
Warning
For handling of the circuit diagram, refer to the warning on the cover. POWER UNIT (BALLAST) 1 (M1-20ED)
A B C D E F G
CONFIDENTIAL
6 6
5 5
4 4
3 3
2 2
1 1
Warning
For handling of the circuit diagram, refer to the warning on the cover. POWER UNIT (BALLAST) 2 (M1-20ED)
A B C D E F G
CONFIDENTIAL
6 6
5 5
4 4
3 3
2 2
1 1
Warning
For handling of the circuit diagram, refer to the warning on the cover. POWER UNIT (CIRCUIT) (M1-20ED)
A B C D E F G
CONFIDENTIAL
+3.3VPW
6 1
6
I201 I201
I201
DIGITAL INPUT PORT PW190 PERIPHERALS PW190
DISPLAY PORT PW190
R2C4
CH0CK C3
GCLK 1 C3 IN0CLK IN0CLP A1 A1 CH0CP D13 D13 NC-D13 C14 1 56 2 R2C5
D4 1 DCLKOUT C14 DCLK
CH0PE D4 IN0PEN IN0CST B2 B2 CH0CS E18 E18 NC-E18 C16 1005 1 33 2 R2C6
*R2K0 1 E6 1 D14 D14 DVS C16 DVS
CH0VB E6 IN0VBI NC-D14 1005 1 33 2
1 0 2 CH0AH 1 C4 DHS D15 D15 DHS
1 C4 IN0AHS NC-A12 A12 A12 C15 1 1005
1005 CH0HS B3 C13 C13 DEN C15 CHDEN
GHS 1 B3 IN0HS NC-C13 NC-E16 E16 E16 7 8R2E4
CH0VS A2 E17 E17
GVS 1 A2 IN0VS NC-E17 NC-B13 B13 B13 C23 5 6100
CH0FL D5 A13 A13 DR0 C23 DRE0
GFIELD 1 D5 IN0FLD NC-A13 A25 3 4 2010
*R2L1 R2A5 DR1 A25 DRE1
33 2 0 2 B24 1 21 2
A9 1 E19 E19 1 DR2 B24 DRE2
A9 NC-A9 SCK THRWSC +3.3VPW B23 3 4 R2C7
D10 1005 1005 1 DR3 B23 DRE3
D10 NC-D10 A23 5 6100
B9 E20 E20 +3.3VI2C R2A6 DR4 A23 DRE4
GR0 B9 IN0R2 RXD0 RXD0 0 2 A24 7 8 2010
5
DR5 A24 DRE5
5
A8 B25 B25 1
GR1 A8 IN0R3 TXD0 TXD0 +3.3VP A21 1 2
E13 1005 DR6 A21 DRE6
GR2 E13 IN0R4 B21 3 4R2C8
C9 A26 A26 DR7 B21 DRE7
GR3 C9 IN0R5 RXD1 RXD1 A22 5 6100
E12 D22 D22 DR8 A22 DRE8
GR4 E12 IN0R6 TXD1 TXD1 B22 7 8 2010
B8 DR9 B22 DRE9
GR5 B8 IN0R7 1
CHIR
1 1.0K 2
GR6 D9 D9 IN0R8 PWRC C24 C24 IRRCVR0
1 D19
R2A7
1.0K
1005
R2A9
1005
A7 CHFG1 E21 E21 DG0 D19
GR7 A7 IN0R9 FAN_FG1 1 IRRCVR1 D18
CHFG2 D23 D23 DG1 D18
FAN_FG2 IRRCVR2 C20
Q2K2 DG2 C20 DGE2
1
C8 R2A2 R2A4
C8 NC-C8 33 2 C19 7 8R2C9
SRA2207SF 1 33 2 DG3 C19 DGE3
CPU-RESET 1 B7 B7 NC-B7 I2CDAT
R2A1 M1 M1 PORTA0 TWOWSC0 D20 D20 R2A3 1 I2CCLKP 5 6150
1 E11 1 33 2 1005 M2 1 33 2 1005 DG4 B20 B20 DGE4
GG0 E11 IN0G2 I2CCLK M2 PORTA1 TWOWSD0 C22 C22 I2CDATP A20 3 4 2010
3 A6 1005 N6 1005 DG5 A20 DGE5
GG1 A6 IN0G3 N6 PORTA2 B19 1 2
E10 E10 IN0G4 5 6 R2A0 N1 N1 PORTA3 TWOWSC1 C21 C21 1 CH2C1
DG6 B19 DGE6
GG2 7 8R2E1
0 2
2 A19
D8 7 8 33 N5 D21 D21 1 DG7 A19 DGE7
R2F0
1005
GG5 1 2
E8 3 4 2010 N4
GG6 E8 IN0G8 RESETP N4 PORTA7 TWOWSD2 C18 C18 1 CH2D2 R2H7 C17
R2F4 1 2 DB0 C17
GG7 B6 B6 IN0G9 1 3.3K 2
Q2K1 100 D252 DB1 D16 D16
1 2 1 2 M3
LAMP_ON M3 PORTB0 1005 B17
SRA2207SF 1 1005 R2F5 SDS511 R2F3 5 6 R2H3 R2H4 DB2 B17 DBE2
A5 A5 NC-A5 FG_SEL1 K2 K2 PORTB1
100 33 3 1 0 2 A17 3 4R2E2
CHUSV 1 3.3K 2 DB3 A17 DBE3
100p-C
C6 1 2 2 1 4 1
KEYO01 M4 AB16 AB16
2
C2A1
1005
C6 NC-C6 LCONT_IN M4 PORTB2 USBVDD 1 B16 1 2150
3 B5 1005 2 1 2010 7 8 CHUSP 1005 1005 DB4 B16 DBE4
GB0 B5 IN0B2 KEYO11 K1 K1 PORTB3 USBP AF19 AF19 1 USBDP A16 7 8 2010
1
A4 CHUSM R2H5 DB5 A16 DBE5
2 GB1 A4 IN0B3 LED-LAMP1 L4 L4 PORTB4 USBM AC17 AC17 1 USBDM B15 5 6
D7
R2C3 10K D253 CHUSG 1 0 2 DB6 B15 DBE6
GB2 D7 IN0B4 LED-TEMP1 L1 L1 PORTB5 USBVSS AC18 AC18 A15 3 4R2E3
SDS511 1005 DB7 A15 DBE7
1 1.5K 2
GB3 A3 A3 IN0B5 LED-P-R L2 L2 PORTB6
7 8 B14 1 2150
R2H8
1005
D6 L3 DB8 B14 DBE8
4 4
GB4 D6 IN0B6 3 4 LED-P-G L3 PORTB7 A14 7 8 2010
B4 DB9 A14 DBE9
GB5 B4 IN0B7 5 6 CH1C0 5 6
R2H1 7 8 3 4 1
GB6 E7 E7 IN0B8 POWER71 E15 E15 PORTC0
1 2 R2C1 1 E23 E23
2 10K 5 6 2 CH1C1 GND1 RPIATEST
POWER11 GB7 C5 C5 IN0B9 2010 VDDMNT 1 B12 B12 PORTC1
1 8.2K 2
33 5 6 1 CHPW0
3 3 4 C12 A10
R2E6
1005
CH1C2 C12 PORTC2 PWM0 A10 PWM_G
D2K1 1 K3 K3 1 2 2010 7 8 1 D12 D11 1 DGE0
CH1CK IN1CLK R2C2 CH1C3 D12 PORTC3 PWM1 D11 CHPW1 7 8R2E5
SDS142WKF 1 2010 1 DGE1
CH1PE K4 K4 IN1PEN 1 10K 2 CH1C4 E14 E14 PORTC4 PWM2 B10 B10 1 CHPW2
1 1 5 6150 DBE0
CH1C5 A11 A11 PORTC5 PWM3 C10 C10 1 CHPW3
1005 1 3 4 2010 DBE1
POWER21 2 B1 B1 NC-B1 CH1C6 B11 B11 PORTC6
1 1 2
3 C2 C2 NC-C2 GND1 CH1C7 C11 C11 PORTC7 GND1
D2K2 1 1 2 E5 E5 1
IN1R2
SDS142WKF 3 4 R2K1 CHOTP 1
D3 D3 IN1R3 OUTTEMPP D24 D24 ADC0
5 6 33 CHOTD 1
E4 E4 IN1R4 OUTTEMP1 C26 C26 ADC1
7 8 Used as Port-E CHITP 1 1 CHDA0
POWER31 2 2010 C1 C1 IN1R5 INTEMP1 D25 D25 ADC2 DAC0 H22 H22
1 1 FAN-CNT1 (EXHAUST FAN)
3 1 2 CHASP E24 CHDA1 3 4 R2H2
POWER51 D2 D2 IN1R6 AIRSPD1 1 E24 ADC3 DAC1 E26 E26
1 FAN-CNT2 (INSIDE PANEL FAN)
D2K3 1 3 4 R2K5 CHAD4 CHDA2 7 8 33
POWER61 E3 E3 IN1R7 GSENSOR F23 F23 ADC4 DAC2 F25 F25
1 FAN-CNT3 (SUB FAN)
SDS142WKF 5 6 33 CHDA3 5 6 2010
DATA-A D1 D1 IN1R8 CHAD5 1 E22 E22 ADC5 DAC3 J22 J22 FAN-CNT4 (OUTSIDE PANEL FAN)
R2K8 7 8 2010 E2 E2 1 D26 1 2
CLK-A IN1R9 CHAD6 D26 ADC6
2 R2K9 1 10K 2
POWER41 CHAD7 1 E25 E25 ADC7
3 1 10K 2 1005 F4 F4 NC-F4
D2K4 1 1005 F3 F3 NC-F3
SDS142WKF 3 4 E1
RC_EN56 E1 IN1G2 UART_SEL
2010
1 2 R2K6
1 10K 2
1005
7 8 33
410K
LAMP_POW F5 F5 IN1G4 1 33 2
5 6 2010 RXD1
6
8
4
2
3 10K
2010 MUTE
5 6 R2K7 G2 G2 IN1G7
OE Vcc
3
7
5
3
3
5
1 2 33 1 5
RGB1/2 G5 G5 IN1G8
3 4 2010 G1
RC_EN38 G1 IN1G9
RXD_JP 2 A
R2L3
G4 G4 NC-G4 1 33 2
GND1 H3 3 GND Y 4
H3 NC-H3 1005
KEYI0 H2 H2 IN1B2
R2F8 5 6 H1 C2A2
KEYI1 H1 IN1B3 R2L5 1 2
33 7 8 J4
KEYI2 J4 IN1B4 1 33 2 0.01/16
20103 4 J3 Used as Port-G I2A2
LAMP-S J3 IN1B5 1005 1005
1 2 H4 [Input only] SN74LVC1G126DCK
NO-COVER H4 IN1B6
J2 J2 IN1B7 1 OE Vcc 5
H5 H5 IN1B8
J1 J1 IN1B9 RXD_CT 2 A
R2L4
33 2
1 33 2
R2L6
1005
3 GND Y 4
1005
2
4
8
6
2
4
6
8
R2L7
1
R2F9 R2H6
1 33 2
10K 10K RXD_LMP RXD0
2010 2010 1005
3
3
7
5
1
R2L8
1 33 2
TXD1
GND1 I2A3 1005
SN74LVC1G125DCK
5 Vcc OE 1
2 R2M1
A 2 Solder side
2
1 33 2 *RG01
TXD_JP 4 Y GND 3 0
1005 1 2
KIKU1C KIKU1S
3 4
C2A3
1 2 R2L9 Near by E800 1 1 5 6
1 33 2 7 8
0.01/16
I2A4
1005 1005 2010
SN74LVC1G126DCK
1 1
R2M3
1005
Near by EA01
R2M4
1
1 33 2 KIKU4C KIKU4S
TXD_LMP TXD0
1005 1 1
Near by EV01
GND1
GND1
1 1
2
1005 A1
R202
1005
R203 1 2
A1 AC15 AC15
0
1 1.0K 2 R2173 4 A2
A2 AE16 AE16
33 5 A3
1
1005 Q201 6
C273 A3 AF16 AF16
A17 DTC114EUA A4
JUMPER R 2
1 2 1 2 AF9 AF9 TMS A4 AC16 AC16
20107 8
A5
N251 R201 3 4 AE9 1 2
EMU-RESET 0.01/16 AE9 TDO A5 AD15 AD15
0 5 R2183 A6
5
I251 3 1005 6 AE8 4
AE8 TDI A6 AE15 AE15
1 33 5 A7
Vout
Vin
S29AL016D70TFI010 R205 20107 8 AC8 6
AC8 TCK A7 AC14 AC14
A16 1 1 0 2 20107 8 A8
1 A15 A16 48 A8 AF15 AF15
TK11125CSC
R206 L216 A9
1005 1 2 AE10 AE10 7 8
RESETB A9 AD14 AD14
1.0/10
1.0K
1
A10
I211
C291
A15 600 H AD9 AD9 R2195 6
2 A14 BYTE# 47 EXTRSTEN A10 AC12 AC12
1005
2 1 1608 33 3 4 A11
AF10 AF10 AE14 AE14
2.5V
2
ADR24B A11
A14 2 R207 1 1 2 20101 2 A12
AD8 AD8 AC13 AC13
Vcont
3 A13 Vss-46 46 TRSTN A12
10K R208 R209 1 R210 AC20
2 7 8 A13
AF14 AF14
GND
AC20 EXTMCLK A13
1.0/10
1005
Np
0
1
0 2 A14
C293
A13 D15 1 0 R2205 6
4 A12 DQ15/A-1 45 1005 1005 A14 AD13 AD13
33 3 4 A15
1 1005 AD17 AD17 AE13 AE13
1
2
CHEX1 EXTINT0 A15
A12 D7 20101 2 A16
5 A11 DQ7 44 CHEX2 1AE18 AE18 EXTINT1 A16 AF13 AF13
0.001
1C2922
R211 A17
1005
2 R228 1 1 2
0 A17 AC10 AC10
A11 D14 10K 1 2 R2213 4 A18
6 A10 DQ14 43 AB8 AB8 TESTMODE0 A18 AC11 AC11
5
1005
5
3 4 33 5 6 A19
AA8 AA8 TESTMODE1 A19 AD12 AD12
A10 D6 5 6 20107 8 R226 A20
7 A9 DQ6 42 AF8 AF8 TESTMODE2 A20 AE12 AE12
7 8 AF7 1 33 2 A21
AF7 VSS A21 AF12 AF12
A9 D13 1 1005
8 A8 DQ13 41 2010 A22 AC9 AC9 CHA22
A23 AD10 AD10 1 CHA23
A20 D5
9 A19 DQ5 40
D0
5
1 2
AE24 AE24 D0
A21 R2223 D1
Vout
Vin
D12 4
10 NC-10 DQ12 39 AC23 AC23 D1
33 5 6 D2
+5V AD16 AD16 RD AD24 AD24 D2
TK11118CSC
1 C271 D4 20107 8 D3
11 WE# DQ4 38 AE23 AE23 D3
D4
I212
E251 0.01/16 1 1 2 AF17 AF17 1 2
CHRDN WR AF26 AF26 D4
WR-60S-VF1-1 110052 R2123 4 R2233 4 D5
1.8V
12 RESET# Vcc 37 CHWRN 1 AC22 AC22 D5
A2 1 60 A1 33 5 6 33 5 6 D6
35mA AC19 AC19 AD23 D6
Vcont
ROMOE AD23
D11 20107 8 20107 8 D7
AE22 D7
GND
13 NC-13 DQ11 36 AE22
Np
A4 2 59 A3 R253 7 8 D8
AE17 AE17 ROMWE AF25 AF25 D8
1.0/10
1
1 10K 2 D9
C296
D3 R213 R2245 6
AE21 D9
1
14 NC-14 DQ3 35 AE21
A6 3 58 A5 1 100 2 33 3 4 D10
1005 AF18 AF18 AD22 D10
2
PCS0 CS0 AD22
0.001
1C2952
D11
1005
D10 1 1005 R214 20101 2
15 RY/BY# DQ10 34 AC21 AC21 D11
1.0/10
1
A7 1 100 2 D12
C298
4 57 AD18 AD18 7 8
PCS1 CS1 AF24 AF24 D12
A19 D2 1 R215 R2255 6 D13
1005 AF23 D13
2
16 A18 DQ2 33 AF23
A9 5 56 A8 1 0 2 33 3 4 D14
NMI AE26 AE26 NMI AD20 AD20 D14
A18 D9 1 20101 2 D15
1 10K 2
17 A17 DQ9 32 1005 AD21 AD21 D15
A11 A10
R216
1005
6 55
A8 D1 GND1
18 A7 DQ1 31
7 54 R291
1 CHRDNE A7 D8 1 0 2
19 A6 DQ8 30 +1.8VCPU
A12 8 53 65mA
4 A14 9 52
1 CHWRNE
A13
A6
A5
20 A5
21 A4
DQ0 29
OE# 28
D0
+3.3V
4
10 51 A15 I201
A4
22 A3 Vss-27 27
POWER AND GROUND 2 PW190 75mA L201
A17 11 50 A16 R272 R255 1 600 H2
1
0 A3 1 10K 2 1C2032 1608
RESETN 23 A2 CE# 26 JUMPER R 25VDD1 F22 F22
10/6.3
1005 GND1
1
A19 A18 1C2042 4.7/6.3
C202
2125
R270 12 49 1 2 1 1005 1FLASH_CE 25VDD2 G21 G21
0 A2 1C2052 1.0/6.3
G22 G22
2
24 A 1 A 0 25 25VDD3
A21 1 1005 2 13 48 A20 R273 L208 0.1/10 1005 1C2062
2
K17 K17 25VSS1 25VDD4 H21 H21
0 1 600 H2 1C2072 0.1/10
R256
1005
1005
1 1.8K 2
CHPA0 1 1005 CPU-RESET +3.3VPW L16 L16 25VSS2 25VDD5 J21 J21
0
1C2082 0.1/10 1005
R274
1005
14 47 1 2 1 G1 G2 G3 G4 1 2125
CHPBHN 1 L17 L17 25VSS3 25VDD6 K21 K21 JUMPER R
A1 0.1/10 1005 1C2092
1
I201 M15 M15 25VSS4 25VDD7 L21 L21
FLASH_CE 15 46 ROMWE POWER AND GROUND 1 PW190
M16 M16 25VSS5 25VDD8 M21 M21
1005 1C2102 0.1/10
1 L209 M17 1C2112 0.1/10 1005
M17 25VSS6 25VDD9 N21 N21
ROMOE 16 45 T2 T2 1 600 H2 0.1/10 1005 1C2122
AMVSS330 AMVDD330 R2 R2 N15 N15 25VSS7 25VDD10 P21 P21
T4 T4 1 C246
2 1608 1005 1C2132 0.1/10
AMVSS331 AMVDD331 R4 R4 N16 N16 25VSS8 25VDD11 R21 R21
D15 17 44 D7 0.1/10 1 C247
2 L210 1C2142 0.1/10 1005
N17 N17 25VSS9 25VDD12 T21 T21
1005 0.1/10 1 600 H2 0.01/16 1005 1C2152
AMVDD18 P3 P3 P15 P15 25VSS10 25VDD13 U21 U21
D14 18 43 D6 1 C248
2 1005 1608 1005 0.1/10
P16 P16 25VSS11 25VDD14 V21 V21
0.1/10 1 2 1005
AVDD331R V6 V6 P17 P17 25VSS12 25VDD15 W21 W21
19 42 D13 1005 L211
1 W3 W3 AVSS33R AVDD33REGR0 W6 W6 R15 R15 25VSS13 25VDD16 W22 W22
600 H
GND1 AVDD33REGR1 W5 W5 1608 R16 R16 25VSS14 25VDD17 Y21 Y21
D5 20 41 D12 1C2492 R17 R17 25VSS15 25VDD18 Y22 Y22
AVDD331G AA1 AA1 1.0/10 T16 T16 25VSS16 25VDD19 AD26 AD26
D4 21 40 AB4 AB4 AVSS33G AVDD33REGG0 AB1 AB1 T17 T17 25VSS17 25VDD20 AA25 AA25
I201
3 AB2 AB2
3
AVDD33REGG1 U17 U17 25VSS18 25VDD21 W25 W25
C250
22 39 D11 MAIN MEMORY PORT PW190 1 2
25VDD22 U26 U26
R231
AVDD331B AD4 AD4 0.1/10 M23 M23 MREFGND0 25VDD23 P26 P26
D3 23 38 D10 1 1.0K 2 1005
H23 H23 NC-H23 MREFIN0 L26 L26 AD2 AD2 AVSS33B AVDD33REGB0 AF2 AF2 U23 U23 MREFGND1 25VDD24 M25 M25
C251 L202
1 2
1 1.0K 2
F26 F26 NC-F26 MREFIN1 V25 V25 1005 AVDD33REGB1 AF3 AF3 25VDD25 L23 L23
D2 SGM20F1C104-4A
R232
1005
24 37 G25 G25 R233 1350mA
NC-G25 0.1/10 25VDD26 J23 J23 2125
0.1/10
2
1 22 2
C270
1005
1 H24 H24 NC-H24 MCK T26 T26 V4 V4 AVSS181R0 RREGOUT T6 T6 1005 25VDD27 R22 R22 1 3
D9 25 36 D1 2
H25 H25 T25 1005 V2 V2
1
NC-H25 MCKN T25 AVSS181R1
10/6.3
10/6.3
GND1 C252 C220
1
C219
2125
C218
2125
R234 R6 R6 1 2 1 2
J24 J24 NC-J24 MCKFBK R23 R23 AVSSR AVDDR18 U6 U6 18VDD1 F6 F6
D8 26 35 D0 1 22 2 1C2212 4.7/6.3
H26 H26 T22 0.1/10 G7 F7 F7
2
NC-H26 MCKFBKN T22 G7 18VSS1 18VDD2
1005 1 AA4 AA4 1005 1C2222 1.0/6.3
K23 K23 NC-K23 NC-M26 M26 M26 AVSS181G0 GREGOUT Y4 Y4 G20 G20 18VSS2 18VDD3 F8 F8
27 34 R278 1PCS0 J25 J25 AA3 AA3 K16 1.0/6.3 1005 1C2232
PCS1 NC-J25 GND1 AVSS181G1 C253 K16 18VSS3 18VDD4 F11 F11 JUMPER R
1 0 1 2 1005 1C2242 1.0/6.3
1005 K24 K24 NC-K24 NC-N25 N25 N25 V1 V1 AVSSG AVDDG18 Y5 Y5 L11 L11 18VSS4 18VDD5 F12 F12
1 2 28 33 1 2 1 J26 J26 L12 1C2252 0.1/10 1005
RXD0 TXD0 NC-J26 NC-N24 N24 N24 0.1/10 L12 18VSS5 18VDD6 F13 F13
1 N23 1005 0.1/10 1005 1C2262
R277 K25 K25 NC-K25 NC-N23 N23 AC4 AC4 AVSS181B0 BREGOUT Y6 Y6 AFE_ADC_REF L13 L13 18VSS6 18VDD7 F17 F17
R279
0 29 32 1 2 1LCONT_IN L24 L24 AC3 AC3 L14 1005 1C2272 0.1/10
NC-L24 NC-R24 R24 R24 AVSS181B1 C254 L14 18VSS7 18VDD8 F18 F18
1005 0 Y7 Y7 1 2 1C2282 0.1/10 1005
L25 L25 NC-L25 AVSSB AVDDB18 AA5 AA5 L15 L15 18VSS8 18VDD9 F19 F19
30 31 1005 1EMU-RESET N22 N22 L212 M11 0.1/10 1005 1C2292
NMI NC-N22 NC-G26 G26 G26 0.1/10 M11 18VSS9 18VDD10 F20 F20
1 AE5 AE5 1005 1 600 H2 1005 1C2302 0.1/10
M24 M24 NC-M24 NC-K26 K26 K26 DVSS18P DVDD18P AF4 AF4 M12 M12 18VSS10 18VDD11 F21 F21
V22 V22 1 C255
2 1608 M13 1C2312 0.01/16 1005
LAMP_ON NC-V22 NC-L22 L22 L22 M13 18VSS11 18VDD12 G6 G6
1 2 AB6 AB6 0.1/10 0.1/10 1005 1C2322
V23 V23 NC-V23 DVSS18ADC DVDD18ADC AA6 AA6 M14 M14 18VSS12 18VDD13 H6 H6
1 Y26 Y26
1005 N11 1005 1C2332 0.1/10
R266 NC-Y26 NC-M22 M22 M22 N11 18VSS13 18VDD14 J5 J5
0 AB7 AB7 1C2342 0.1/10 1005
W24 W24 NC-W24 NC-R25 R25 R25 VSS_33E1 VDD_33E1 AA7 AA7 N12 N12 18VSS14 18VDD15 J6 J6
1005 AC5 AC5 1 C256
2 0.1/10 1005 1C2352
W23 W23 NC-W23 NC-N26 N26 N26 AVSSP AVDDP AB5 AB5 N13 N13 18VSS15 18VDD16 K5 K5
Y24 Y24 0.1/10 N14 1005 1C2362 0.1/10
NC-Y24 NC-V26 V26 V26
1005 N14 18VSS16 18VDD17 K6 K6
AB26 AB26 NC-AB26 NC-P22 P22 P22 AF6 AF6 XVSS XVDD AD7 AD7 P11 P11 18VSS17 18VDD18 AA9 AA9 0.01/16 1005
Y23 Y23 U24 1 C257
2 P12 1005
NC-Y23 NC-U24 U24 P12 18VSS18 18VDD19 AA13 AA13
2
0.1/10
2
AA24 AA24 NC-AA24 NC-P23 P23 P23 G23 G23 DACVSS DACVDD F24 F24 P13 P13 18VSS19 18VDD20 AA14 AA14
AB25 AB25 U25 C258
1 2 1005 P14
NC-AB25 NC-U25 U25 P14 18VSS20 18VDD21 AA15 AA15
B26 B26 0.1/10
AC26 AC26 NC-AC26 NC-P24 P24 P24 ADCVSS ADCVDD C25 C25 1005
R11 R11 18VSS21 18VDD22 AA19 AA19
AA23 AA23 NC-AA23 NC-U22 U22 U22 R12 R12 18VSS22 18VDD23 AA20 AA20
K10 1C2612
AC24 AC24 NC-AC24 NC-P25 P25 P25 K10 33VSS1 33VDD1 F9 F9 R13 R13 18VSS23 18VDD24 AA21 AA21
1
K11 1C2622 4.7/6.3
AB23 AB23 NC-AB23 NC-T23 T23 T23 K11 33VSS2 33VDD2 F10 F10 R14 R14 18VSS24 18VDD25 AA22 AA22
K12 1C2632 1.0/6.3
AD25 AD25 R26 F14 F14 T11 AB9 AB9
2
NC-AD25 NC-R26 R26 K12 33VSS3 33VDD3 T11 18VSS25 18VDD26 C237
I253 AE25 AE25 NC-AE25 NC-T24 T24 T24 K13 K13 33VSS4 33VDD4 F15 F15 1.0/6.3 1005 1C2642 T12 T12 18VSS26 18VDD27 AB13 AB13
1 2
C260
M24128-BWMN6 K14 1005 1C2652 0.1/10 10/6.3 1.0/6.3
K14 33VSS5 33VDD5 F16 F16 2125
T13 T13 18VSS27 18VDD28 AB14 AB14 C238 1005
K15 1C2662 0.1/10 1005 1 2
1 E0 VCC 8 NC-V24 V24 V24 K15 33VSS6 33VDD6 L5 L5 T14 T14 18VSS28 18VDD29 AB15 AB15
0.01/16 1005 1C2672 1.0/6.3
1 4.7K 2
1 4.7K 2
1C2682 0.1/10
C272
1005
R262
1005
R264
1005
M10 1005
2 E1 WC 7 M10 33VSS8 33VDD8 M5 M5 U16 U16 18VSS30 18VDD31 AB20 AB20
R261
Y25 Y25 N10 M6 M6 0.1/10 1005 Y20 AB21 AB21 1.0/6.3
1
1005
R265
1005
0.1/10
820
820
U11 U11 33VSS14 33VDD14 AA17 AA17 AB18 AB18 MPLLVSS MPLLVDD AF21 AF21
U12 1005 1 C242
2
U12 33VSS15 33VDD15 AA18 AA18
1
U13 0.1/10
U13 33VSS16 33VDD16 AB10 AB10 AB17 AB17 DPLLVSS DPLLVDD AF22 AF22
U14 1005
U14 33VSS17 33VDD17 AB11 AB11
U15 U15 33VSS18 33VDD18 AB12 AB12 AE20 AE20 URESVSS URESVDD AD19 AD19
1 1 C243
2
G24 G24 MDSKVSS MDSKVDD K22 K22 0.1/10
GND1 1C2442 1005
0.1/10 1C2452
1005 1.0/6.3
1 1
1005
1 10K 2
R378
1005
1 10K 2
R3A2
1005
R376
CPU-RESET
1 220 2
S309
1005 I301 SKHHLMA010
R371 R379 RN5VD26C
1 220 2 1 100 2
RESETN 1 OUT Cd 5
1005 Q372 1005 1 2
SRC1202EF G1 G2
2 2 VDD
G1 G2
0.01/16
0.33/10
C390
2
1
C376
1005
C377
3 1 2
3 GND NC 4
0.01/16
0.1/10
1
2
2
C374
1005
1 1005
1 100 2
R3A0
1005
GND1
5 +5V
5
OUTTEMP
OUTTEMPP
TEMP
D302 R332
INTEMP
2 1 2 330 1
LED-TEMP
1005
SML-210VT
LAMP
D303 R333
2 1 2 330 1
LED-LAMP
1005
SML-210VT
JUMPER R
AP384
AP383
E304
D301
ZH-02H L384
GREEN
600 H
1
OUT-SIDE 1 1 2 1 2 2 R330 1
SENSOR LED-P-G
R331 220
2
in Duct 1608
0.001
2 100 1
2
1005
C383
1005
R386
1005
2 3 4
10K
(10K)
4
LED-P-R
RED 1005
4
1
L383
1
G1 SML-020MVT86
600 H
1 2
G2
2
8.2K-1%
1608
0.001
2
R387
1005
C384
1005
1
1
AP385
AP386
1
E305 L361
SH-02H 600 H
1 2
1
2
IN-SIDE 1608
0.001
2
C361
1005
R361
1005
SENSOR
10K
on PO 2
1
(10K) L362
1
600 H
1 2
G1
2
1608
8.2K-1%
G2
0.001
2
R368
1005
C362
1005
1
L386
600 H
1 2
2
1608
3
0.001
3
2
C385
1005
R390
1005
10K
1
L385
1
600 H
1 2
2
8.2K-1%
1608
0.001
2
R391
1005
C386
1005
1
KEYI0
KEYI1
KEYI2
KEYO0
POW
INPUT UP
AIRSPD
S301 S302 S304
SKRAAAE010 SKRAAAE010 SKRAAAE010
1 2 1 2 1 2
FAN+15V 1 2 1 2 1 2
C351 Q352
1
3
1005 R357
100p-C
100p-C
100p-C
100p-C
100p-C
100p-C
2
2
12.0K-1%2
C320
1005
C321
1005
C322
1005
C323
1005
C316
1005
C317
1005
2
1005
1
2
2
2
4
6
8
2
3216
13.3K-1%2
R353
R358
1.0K
1005
270
I333
R355
1005
JUMPER R LM358AD
3
5
1
1
E302
1 1OUT VCC 8
ZH-02H L351 R359 1 Q353
600 H KEYO1
1 1 2 1 100 23 2SA1980UFG
Air speed 2 1IN- 2OUT 7 RIGHT DOWN LEFT
SENSOR 1608 R354 1005 R392
10/10
1
15.1K-1%2 2680-1%1
C355
2125
600 H
0 2
1005
4 GND 2IN+ 5 1 2 1 2 1 2
1608 SRC1202EF 1 0 2 13.3K-1%2
2
3 4 3 4 3 4
122K-1%2
1005 1005
0.1/16
3 4 3 4 3 4
1
C352
2
C353
1005
R350
1005
3 1 2
11.5K-1%2
POWER5
0.1/16
2
C354
1005
R348
1005
0.1/25
1
100p-C
100p-C
100p-C
100p-C
100p-C
100p-C
2
1C3252
1C3272
1C3292
C324
1005
1005
C326
1005
1005
C328
1005
1005
1
1
1
1
1
AP351
AP352
GND1
GND1
1 1
POWER7
+15.5V
POWER5
POWER6
+3.3VP
+1.8VP
10K
+3.3V
+6.6V
2 22K
1 1005 2
+5V
3 1005
6 MOUSE
1 Q809
2SC5343UFG 6
(R820+R819+R818)/R820*1.25V=3.30V
PWRC
(R814+R813+R812)/R814*1V=15.41V
2
I801
R816
1005
4
SI-3010KM
1 100 2
100
Vout
Vin
R828
1005
15.5V-Panel
TK11150CSC
I892 L816
I808 C823
4.7 H
I805
SN74LVC1G32DCK ->TC7SZ32FTE85L 5V 0.033/16
MM1661JHBE C6-K3LA 1.8V-CPU
Vout
A C824 1 2 1 2
Vin
GND
ADJ
1 Vcc 5 I802 I803 1 2 +1.8VCPU
Vc
5 4
1 5 Cont Cn
Vcont
MM1663DHBE MM1663DHBE 1005
B R811 1 2 3 4 5 C814 C816 470p I807
2
GND
RC_EN56 2 1 2 1 2 1005
680-1%
10K
Np
2
TPS40222DR
C827
680p
12K-1% 1005
5 4 5 4 6 3
2
R833
Cont Cn Cont Cn NC-6 GND
C835 1005
1.0/10
1
470p 470p
C831
G1
Y 2 1005 1
1
GND
4 3
1.0/10
3 4 1005 1005
UDZ2.0B
PVIN SE
2
C8A6
6 3 6 3 7 2
1 1005 21
3 4 R829
2
NC-6 GND NC-6 GND NC-7 NC-2
10/6.3
10/6.3
10/6.3
R830
1005
2
C896
2
0 2
R832
2125
C837
2125
C839
2125
D813
1.8V-TG
G1 G1
10
1
1
5 G1 2
7 2 7 2 8 1 AVIN GND
2 1
0.1/10 NC-7 NC-2 NC-7 NC-2 Vin Vout 1005
1
1.0/10
10/6.3
1
0.001
3.3V-CPU
2
1
1005 1.8V-CPU
C820
C830
1005
C821
2125
1
127K-1%2
I893 3.3V-Panel 6 1
BOOST FB
10K-1%
R812
1005
8 1 8 1
SN74LVC1G32DCK ->TC7SZ32FTE85L Vin Vout Vin Vout
1
2
R831
1005
A
SFPB-66
1 Vcc 5 I891
C840
0.1/25
SN74LVC1G08DCK ->TC7SZ08FUTE85L
1.0/10
1 5 1 2
2
MVK/SKV
1
C817
10/6.3
10/6.3
2
47/16
1
2
C812
C819
2125
C828
2125
D812
B
1.0/10
C811
14.7K-1%2
10/10
2
C834
2125
RC_EN38 A Vcc 1.0/10
10/6.3
10/6.3
2 1 5
2
2
R813
1005
C813
C836
2125
C838
2125
2
1
2
1.0/10
1
2
1
Y
2
1
1
C818
GND B
1.0/10
3 4 2 AND
2
2C8261
C832
680p
1005
3 4 R895
10/10
2
1
C833
2125
1.0/10
5
2
1 100 2
1
C815
1.0/10
2
2.2K-1%
2C8251
1
GND Y
10/6.3
3 4
0 2
1
R814
C810
2125
1005
1005
1
R8R1
1005
AP-FS1
1
1
1
R8F1
0 2
R8R2
1005
10K
1005
1
C8A2
FG_SEL1
0.1/10
1
2 1
1005 I833
4
8
6
2
C8A1
2010
AP16
AP14
SN74LVC1G125DCK ->TC7SZ125FUTE85L
1
E805
R8A6
L810 0.1/10
10K
I831
501568-04H 2 1
1
1 CH-FG2
1 AP-FG2
SN74LVC1G125DCK ->TC7SZ125FUTE85L 1 5
1 AP-FG
1 CH-FG
2
1608
7
5
3
1
REMOTE2 2 L809
1
1 OE Vcc 5
(56.9KHz) 4 600 H R8A5 2 A SUB R8F3
1608
VCC 2 1 1 100 2
2 A EXHAUST 1 100 2
3 1005 R8F2 3 GND Y 4 FAN_FG1
2L807 600
1 H 1 100 2 1005
REMOTE1 3 GND Y 4 FAN_FG2
(38KHz) 2 1608 1005
R8A2
GND 2 1
1 100 2
I834 SEL FAN_FG1
1 SN74LVC1G126DCK
L806 ->TC7SZ126FUTE85L
600 H 1005
I832 0 SUB (I833)
1
AP15
1 OE Vcc 5
JUMPER R R8A4 2 A IN_PANEL
1 100 2 SEL FAN_FG2
2 A
OUT_PANEL 3 GND Y 4
1005
0 EXHAUST (I831)
3 GND Y 4
1 OUT_PNL (I832)
4 FAN+15V
R8A3
1 100 2 4
+6.6V 1005 (OUTSIDE PANEL FAN -TSB)
+17V L821 E807
600 H SH-03H
APP1
APP2
APP3
PHD-12H-D
2
C800
3216
L803
FAN GND 4 3 SGM20F1C104-4A G1 NC
2125 G2
1 3
+17V 6 5 ACTIVE 2 FAN-CNT4
APGND
1
5
5
1 10K 2
3
APP6
2.2/25
2010
2010
1005
C801
3216
R892
R893
10K
APF12
APF13
APF14
GND SI-3010KM SI-3010KM SI-3010KM
1
1
8 7 SI-3010KM
1
R886
1 10K 2
8
6
4
2
R890
1005
0
10 9 Audio_GND
2 R862 1
+6.6V 1 1005 2
2 R852 1
2125
POWER4
2125
R894
0
12 11
0
0 2
Vout
Vout
Vout
1 (LAMP FAN -NMB)
Vin
GND
ADJ
Vin
GND
ADJ
Vin
GND
ADJ
Vout
Vc
Vc
Vc
Vin
GND
ADJ
APF11
APF10
E806
2 1005 1
2125 L824
Vc
APF9
R884
1 3 501568-03H
4.7K
1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 600 H
2 1 2 3 4 5
L804
1
1 1608 2 1 FAN3S
2.2/10
SGM20F1C104-4A
2
C802
2125
4.7K 1 2600 H 2
3
VCC
3
1
C8A4 MVK/SKV
2125
100/16
2
1005
1
C865
51K-1%
R865
1005
1 2 3
51K-1%
2
GND
2 1
MVK/SKV
2
1 R855
1005
18K-1%
2
L826
1
1.0/10 C851
47/16
R883
1005
18K-1%
0.01/25
R881
1005
0.1/25
1.0/10
1
C855 600 H
2
1
APP7
R800
1005
C864
1 2 G1
C804
1
2125
1
1
0 100/16
47K-1%
R866
1005
2 1
G2
47K-1%
2
1
2
C8A3
1005
1
MVK/SKV
0.1/25
1 2 1 2
1
2
R856
1005
JUMPER R
100K-1%
1
100K-1%
2
C852
1
2
R864
1005
L801 R801
R854
1005
2
GND1 600 H 3.9K
MVK/SKV
1
FAN-CNT3
1
2 R867 1
47/16
1
1608 1005
C861
R853 2 R857 1
10K-1%
2
A_GND Q802 (SUB FAN)
2
R863 30K-1%
R868
1005
68K-1%
0.1/25
SRA2207SF 30K-1%
2
3
2
68K-1% 1005 1005
C862
1005
2 1 1005 2
2
1
10K-1%
1
2 1
R858
1005
(EXHAUST FAN -NIDEC)
10K-1%
0.1/25
3
10K-1%
2
R859
C854
POWER1 L827 E801
1005
APF3
APF2
APF1
R869
1005
501568-03H
1
Q803 600 H
1
1
1
1 1608 2
2
SRC1202EF 1
FAN1S
L828
1 2
600 H 2
VCC
2125
L829
600 1H 2 3
GND
2125
G1
G2
2 RXD_LMP
1 R8P2 2
(INSIDE PANEL FAN)
2
2 R872 1
1.0K
2 R841 1
2125
2
2125
1005 R808
0
(EXHAUST FAN)
R887
1005
0
4.7K
4.7K
Vout
Vout
1
Vin
GND
ADJ
Vin
GND
ADJ
2
Vc
Vc
Vout
Vout
G2
Vin
GND
ADJ
Vin
GND
ADJ
1
1
G2
APS2
Vc
Vc
S801 1 2 3 4 5 1 2 3 4 5 E802
1
L831
APF7
APF6
APF5
1
SH-03H
R802
3.3K
1005
G1
1 2 3 4 5 1 2 3 4 5 600 H
ESE11MH2T Q806
G1
1
SRA2207SF 1 1608 2 1
3
LAMP_COVER_SW FAN2S
1
L832
1 2
600 H 2
VCC
2
2
C875 2125
1 2R875 1
2
R821
1005
1
R845
1005
18K-1%
0.1/25
47K-1% 51K-1%
1005 1 1005 2
51K-1%
R882
1005
C874
1.0/10
100/16 1 2 3
0
1 R804 2
1 R805 2
2
R842
C8A7
GND
100K-1% 18K
0.1/25
1
1005
2
1.0K
1005
2
1
1
R837
1005
NO-COVER
0.1/25
1.0/10
1
C872
100
2
1
C844
C8A5
1005
1
1 R803 2 100/16 600 H
MVK/SKV
G1
1
2
47/16
1
2125
1
2
C871
100K MVK/SKV
R822
1005
47K-1%
1
1
R844
R846
1005
2
G2
1
100K-1%
1005
JUMPER R
0
2
R874
1005
R876
LAMP-S
1005
Q804
APN5
SRA2207SF FAN-CNT2
2
2
1
1
for M1-25
0.1/25
MVK/SKV
1 2 2 R877 1
1
2
47/16
L8P1
2
1
C843
C841
2
(INSIDE PANEL FAN)
600 H 1 2 30K-1%
2
168K-1%2
R806
10K-1%
1005 for M1-25
1 1005 2
R8P1
100 1005
2
R843
1005
0 1005
10K-1%
1
1
2
R873
R840
R807 0
APN1
APN2
APN3
2 1005 1
30K-1%
E814 1005
10K-1%
68K-1%
1 1005 2
2
for M1XM
R879
SH-05H
R847
1005
10K-1%
1for M1-25
R878
1005
1005
1
E804 2
3
1005
Q807
R848
ZH-04H
2
1 R8P3
0.01/25
1
FLAG/TXD 2 SRA2207SF
2
1C8052
1
1 1 2 1 2 0
3
P_ON/OFF
2 L811 600 H 1608 3 1005
GND L812 C806 2
2 1 2 0.01/25
GND
1
Q805
1
3 600 H 1608 1005 1 3 2 R880 1
0.01/25
+5V SRC1202EF
1 L813 2
2
C807
1005
3 0
LAMP MISS
4 600 H 1 Q808 1005
P_ON/OFF
1
SRC1202EF
1 1608 2
(EXHAUST FAN)
LAMP_POW
600 H 0
1
G1
1608 1005 LAMP_ON
G1 G2 APN4 for
1 M1-25
2
G2 TXD_LMP
JUMPER R
A B C D E F G
CONFIDENTIAL
6 6
5 5
I401
CXD3540GB
from I808
L401
CXD3540GB 3/3
I401 controlled by POWER5
CXD3540GB 2.2 H
CHK415
CHK414
CHK413
I401
CXD3540GB 1
2518
2 275mA@1.8VD4
CXD3540GB 1/3 +1.8VP D4 VDDI-D4 VSS-A1 A1 A1
1
D7 D7 VDDI-D7 VSS-A2 A2 A2
R401 CXD3540GB 2/3 R431 2 1
HST_R C401 D8 D8 VDDI-D8 VSS-A7 A7 A7
0 56 C402
100/6.3
MVK/SKV
1
DRE9 G20 G20 R1IN9 R1OUT11 N20 N20 1 2
RD1-11
1 2
VST_R 10/6.3 1 2 D11 D11 VDDI-D11 VSS-A21 A21 A21
C409
H22 N21 3 4 A8 3 4 2125 D12
A5 0.001 VDDI-D12 A22 A22
2
DRE8 H22 R1IN8 R1OUT10 N21 RD1-10 DHS A8 HDIN HST_R A5 VCK_R C403 D12 VSS-A22
5 6 R421 5 6 R432 1005 1 2
DRE7 H21 H21 R1IN7 R1OUT9 P20 P20 RD1-9 from PW DVS B8 B8 VDIN VST_R A6 A6 D15 D15 VDDI-D15 VSS-B1 B1 B1
R402 0 2 56
H20 7 8 1 T3 B6 7 8 1 1 2 H4
DRE6 H20 R1IN6 R1OUT8 P21 P21
0 RD1-8 DCLK T3 CLK VCK_R B6 C404 0.1/10 H4 VDDI-H4 VSS-B7 B7 B7
J22 1 2 PW PORTA5 1005 W1 B5 3 4 1 2 1005 R4
DRE5 J22 R1IN5 R1OUT7 P22 P22 2010 RD1-7 RESETX W1 XCLR PST_R B5 2010 CHPSTR HCK2_R R4 VDDI-R4 VSS-B22 B22 B22
J21 3 4 PW PORTA7 V1 A4 5 6 W4
DRE4 J21 R1IN4 R1OUT6 R20 R20 RD1-6 RESETP V1 XPLLSTB HCK2_R A4 HCK1_R 0.001 C405 W4 VDDI-W4 VSS-C7 C7 C7
5 6 R433 7 8 1005 1 2
DRE3 J20 J20 R1IN3 R1OUT5 R21 R21 RD1-5 HCK1_R C5 C5 W7 W7 VDDI-W7 VSS-C8 C8 C8
R403 R422 56
K22 7 8 W2 W2 B3 1 2 W8
DRE2 K22 R1IN2 R1OUT4 R22 R22
0 RD1-4 +3.3VI2C CTRL DCK4_R B3 2010 DCK4_R 0.1/10 W8 VDDI-W8 VSS-H2 H2 H2
K21 1 2 2 0 1 A3 3 4 1005 W11
DRE1 K21 R1IN1 R1OUT3 T20 T20 2010 RD1-3 DCK3_R A3 DCK3_R W11 VDDI-W11 VSS-H3 H3 H3
1 1.0K 2
1 1.0K 2
3 4 1005 5 6 2 1
K20 T21 C4 W12 VDDI-W12 J1 J1
R449
1005
R450
1005
DRE0 K20 R1IN0 R1OUT2 T21 RD1-2 DCK2_R C4 DCK2_R C406 C407 W12 VSS-J1
5 6 B4 7 8 1 2 W15
R1OUT1 T22 T22 RD1-1 DCK1_R B4 DCK1_R 10/6.3 W15 VDDI-W15 VSS-J2 J2 J2
7 8 R423 R434 2125
D22 D22 R2IN9 R1OUT0 U22 U22 RD1-0 2010 HST_G 0.1/10 VSS-J3 J3 J3
R404 56
D21 PW TWOWSC0 R424 1 33 2 R1 R1 F3 1 2 1005
D21 R2IN8 2010 0 I2CCLKP HSCL HST_G F3 VST_G VSS-J10 J10 J10
R425 1 33 2 1005
4
1 3 4
4
E22 2 PW TWOWSD0 T1 T1 C3 2 1
E22 R2IN7 R2OUT11 U20 U20 RD2-11 I2CDATP HSDA VST_G C3 VCK_G C408 VSS-J11 J11 J11
E21 3 4 1 10K 2 1005 P1 P1 D3 5 6 R435 L402
E21 R2IN6 R2OUT10 U21 U21 RD2-10 +3.3VP HSEL VCK_G D3 56 1.0/10 VSS-J12 J12 J12
5 6 7 8 1 2 10 H
E20 E20 R2IN5 R2OUT9 V20 V20 RD2-9 1005 PST_G G3 G3 1 VSS-J13 J13 J13
R405 7 8 3 4 1
2518
2 135mA@2.5VD5
1 10K 2
F22 F22 R2IN4 R2OUT8 V21 V21 RD2-8 HCK2_G C2 C2 2010 CHPSTG HCK2_G D5 VDE2-D5 VSS-J14 J14 J14
0 R436
R426
1005
1 2 B2 5 6 E4
F21 F21 R2IN3 R2OUT7 V22 V22 2010 RD2-7 HCK1_G B2 56 HCK1_G E4 VDE2-E4 VSS-K2 K2 K2
CHK412
CHK410
3 4 1 2 7 8 2 1
MVK/SKV
F20 W20 W20 G2 J4 K3 K3
1
VDE2-J4 VSS-K3
47/6.3
1
1
F20 R2IN2 R2OUT6 RD2-6 DCK4_G G2 C411 C412 J4
G22 5 6 F2 3 4 10/6.3 1 2 V4
W21 W21 2010 VDE2-V4 VSS-K9 K9 K9
C420
G22 R2IN1 R2OUT5 RD2-5 DCK3_G F2 DCK4_G V4
R406
2
G21 7 8 E2 5 6 2 1 2125 W5
G21 R2IN0 R2OUT4 W22 W22 0 RD2-4 DCK2_G E2 DCK3_G C452 0.001 C413 W5 VDE2-W5 VSS-K10 K10 K10
1 2 D2 7 8 1005 1 2
R2OUT3 Y20 Y20 2010 RD2-3 DCK1_G D2 DCK2_G 1.0/10 C453 VSS-K11 K11 K11
3 4 R437 1 2
Y21 Y21 2010 D18 D18 VDE2-D18 K12 K12
R2OUT2 RD2-2 DCK1_G C414 0.1/10 VSS-K12
4 3
56 Vout Np
C22 5 6 P3 1 2 1 2 1005 W18 W18 VDE2-W18
DGE9 C22 G1IN9 R2OUT1 Y22 Y22 RD2-1 HST_B P3 HST_B 0.001 VSS-K13 K13 K13
B21 7 8 L3 3 4 1005
DGE8 B21 G1IN8 R2OUT0 AA21 AA21 RD2-0 VST_B L3 VST_B 0.001 VSS-K14 K14 K14
2
R407 GND1 GND C415
C21 M3 5 6 1005 1 2 D19
DGE7 C21 G1IN7 22 2010 VCK_B M3 VCK_B D19 VDE2-D19 VSS-K19 K19 K19
7 8 7 8 R438
DGE6 A20 A20 G1IN6 G1OUT11 AA16 AA16 GD1-11 PST_B R3 R3 1 5 1
0.1/10 E19 E19 VDE2-E19 VSS-L9 L9 L9
56 Vin Vcont
from PW DGE5 B20 B20 G1IN5 G1OUT10 Y17 Y17
5 6
GD1-10 [I2C slave address : 74h] HCK2_B M2 M2 2010 CHPSTB 1 2 1005 G19 G19 VDE2-G19 VSS-L10 L10 L10
C20 3 4 L2 3 4 TK11125CSC 2 1 L19
DGE4 C20 G1IN4 G1OUT9 AB16 AB16 GD1-9 HCK1_B L2 HCK2_B C416 C417 L19 VDE2-L19 VSS-L11 L11 L11
R408 R439 6 I402
DGE3 D20 D20 G1IN3 G1OUT8 AA17 AA17
1 2
22 GD1-8 DCK4_B T2 T2
56
5
HCK1_B 10/6.3 1 2 R19 R19 VDE2-R19 VSS-L12 L12 L12
A19 7 8 R2 1 2 7 8 2125 V19
DGE2 A19 G1IN2 G1OUT7 Y18 Y18 2010 GD1-7 DCK3_B R2 0.001 C418 V19 VDE2-V19 VSS-L13 L13 L13
B19 5 6 P2 3 4 1005 1 2 W19
DGE1 B19 G1IN1 G1OUT6 AB17 AB17 GD1-6 DCK2_B P2 2010 DCK4_B W19 VDE2-W19 VSS-L14 L14 L14
C19 3 4 N2 5 6
DGE0 C19 G1IN0 G1OUT5 AA18 AA18 GD1-5 to S/H part DCK1_B N2 DCK3_B 0.1/10 VSS-L20 L20 L20
R409 1 2 7 8 2 1 1005
G1OUT4 Y19 Y19 22 GD1-4 DCK2_B C451 VSS-L21 L21 L21
A18 7 8 2 1
A18 G2IN9 G1OUT3 AB18 AB18 2010 GD1-3 ENB D1 D1 2010 DCK1_B 1.0/10 C419 VSS-L22 L22 L22
5 6 R440 L403
B18 B18 G2IN8 G1OUT2 AA19 AA19 GD1-2 PCG E1 E1 1.0/10 VSS-M9 M9 M9
56 10 H
C18 3 4 1 2
C18 G2IN7 G1OUT1 AB19 AB19 GD1-1 CLR F1 F1 ENB 2518 150mA@3.3V VSS-M10 M10 M10
A17 1 2 3 4 1 2
A17 G2IN6 G1OUT0 AA20 AA20 GD1-0 DWN U2 U2 PCG +3.3VP D6 D6 VDE3-D6 VSS-M11 M11 M11
R410 5 6
B17 SCAN V2 V2 D9 M12 M12
3
2010 VDE3-D9 VSS-M12
3
B17 G2IN5 22 CLR from I802 D9
C17 7 8 7 8 2 1
C17 G2IN4 G2OUT11 AA12 AA12 GD2-11 XSCAN G1 G1 DWN C421 C422
D10 D10 VDE3-D10 VSS-M13 M13 M13
100/6.3
MVK/SKV
1
A16 A16 G2IN3 G2OUT10 Y13 Y13
3 4
GD2-10 FRP H1 H1 2010 controlled by POWER6 10/6.3 1 2 D13 D13 VDE3-D13 VSS-M14 M14 M14
R441
C434
B16 5 6 2125
AB12 AB12 VD C1 C1 0.001 D14 VDE3-D14 VSS-M20 M20 M20
2
B16 G2IN2 G2OUT9 GD2-9 56 C423 D14
R411 1 2 1 2 1005 1 2
C16 C16 G2IN1 G2OUT8 AA13 AA13 GD2-8 PRG_R C6 C6 SCAN D16 D16 VDE3-D16 VSS-M21 M21 M21
22
A15 7 8 3 4
A15 G2IN0 G2OUT7 Y14 Y14 2010 GD2-7 PRG_G E3 E3 XSCAN C424 0.1/10
D17 D17 VDE3-D17 VSS-M22 M22 M22
5 6 5 6 1 2 1005
G2OUT6 AB13 AB13 GD2-6 PRG_B N3 N3 FRP F4 F4 VDE3-F4 VSS-N9 N9 N9
B15 3 4 7 8
DBE9 B15 B1IN9 G2OUT5 AA14 AA14 GD2-5 CLKOUT1 N22 N22 VD 0.001 C425
F19 F19 VDE3-F19 VSS-N10 N10 N10
1 2 R412 CHK4T1 1005 1 2
DBE8 C15 C15 B1IN8 G2OUT4 Y15 Y15 GD2-4 K1 K1 TEST1 CLKOUT2 AB20 AB20 2010 G4 G4 VDE3-G4 VSS-N11 N11 N11
22 CHK4T2 1 R442
A14 7 8
DBE7 A14 B1IN7 G2OUT3 AB14 AB14 2010 GD2-3 L1 L1 TEST2 CLKOUT3 AB10 AB10 56
to S/H part 0.1/10 H19 H19 VDE3-H19 VSS-N12 N12 N12
5 6 CHK4T3 1 1 2 1005
DBE6 B14 B14 B1IN6 G2OUT2 AA15 AA15 GD2-2 M1 M1 TEST3 PRG_R J19 J19 VDE3-J19 VSS-N13 N13 N13
3 4 CHK4T4 1 3 4 2 1
DBE5 C14 C14 B1IN5 G2OUT1 Y16 Y16 GD2-1 U1 U1 TEST4 GCFB_R U3 U3 PRG_G C426 N19 N19 VDE3-N19 VSS-N14 N14 N14
CHKTRS 1 C427
A13 1 2 N1 5 6 10/6.3 1 2
DBE4 A13 B1IN4 G2OUT0 AB15 AB15 GD2-0 N1 TRST GCFB_G V3 V3 PRG_B P4 P4 VDE3-P4 VSS-P9 P9 P9
R413 CHK4NC 1 7 8 2125
DBE3 B13 B13 B1IN3 2010 M19 M19 NC GCFB_B W3 W3 0.001 P19 P19 VDE3-P19 VSS-P10 P10 P10
56 1 C428
C13 7 8 R443 1005 1 2 T4
DBE2 C13 B1IN2 B1OUT11 Y6 Y6 BD1-11 2010 T4 VDE3-T4 VSS-P11 P11 P11
A12 5 6 1 56 2 R444 T19
DBE1 A12 B1IN1 B1OUT10 AA6 AA6 BD1-10 SHCLK_R C429 0.1/10 T19 VDE3-T19 VSS-P12 P12 P12
3 4 56 2 R445
DBE0 B12 B12 B1IN0 B1OUT9 AB6 AB6 BD1-9 1005 1 SHCLK_G
1 2 1005 U4 U4 VDE3-U4 VSS-P13 P13 P13
1 2 R414 1 56 2
B1OUT8 Y7 Y7 BD1-8 1005 SHCLK_B 0.001 U19 U19 VDE3-U19 VSS-P14 P14 P14
56 C430
C12 7 8 1005 1005 1 2 W6
C12 B2IN9 B1OUT7 AA7 AA7 2010 BD1-7 W6 VDE3-W6 VSS-Y10 Y10 Y10
A11 AB7 5 6 R446 W9
A11 B2IN8 B1OUT6 AB7 BD1-6 C431 0.1/10 W9 VDE3-W9 VSS-Y11 Y11 Y11
3 4 1 33 2 R447 1 2 1005
B11 B11 B2IN7 B1OUT5 Y8 Y8 BD1-5 GCFB_R W10 W10 VDE3-W10 VSS-Y12 Y12 Y12
R415 33 2 R448
C11 C11 B2IN6 B1OUT4 AA8 AA8 1 2
BD1-4 1005 1 GCFB_G 0.001 W13 W13 VDE3-W13 VSS-AA1 AA1 AA1
56 33 2 C432
A10 A10 B2IN5 B1OUT3 AB8 AB8 7 8 2010 BD1-3 1005 1 GCFB_B 1005 1 2 W14 W14 VDE3-W14 VSS-AA10 AA10 AA10
B10 Y9 5 6 1005 W16
B10 B2IN4 B1OUT2 Y9 BD1-2 0.1/10 W16 VDE3-W16 VSS-AA11 AA11 AA11
C10 AA9 3 4 1005 W17
C10 B2IN3 B1OUT1 AA9 BD1-1 W17 VDE3-W17 VSS-AA22 AA22 AA22
A9 AB9 1 2 2 1
A9 B2IN2 B1OUT0 AB9 BD1-0 C433 VSS-AB1 AB1 AB1
2
R416
B9
C9
B9
C9
B2IN1
B2IN0 B2OUT11
B2OUT10
Y1
Y2
Y1
Y2
2010
7
5
56
8
6
BD2-11
BD2-10
10/6.3
2125
VSS-AB2
VSS-AB11
VSS-AB21
AB2 AB2
AB11 AB11
AB21 AB21
2
AA2 3 4 L404
B2OUT9 AA2 BD2-9 VSS-AB22 AB22 AB22
R417 1 2 600 H
B2OUT8 Y3 Y3 BD2-8
56 1608
AA3 7 8 2 1 K4 K4
B2OUT7 AA3 2010 BD2-7 VDDA1 VSSA1 L4 L4
AB3 5 6 2 1 M4 M4
B2OUT6 AB3 BD2-6 VDDA3 VSSA3 N4 N4
Y4 3 4 L405
B2OUT5 Y4 BD2-5
1.0/10
10/6.3
1.0/10
C441
1
R418 600 H
C442
C443
2125
C444
AA4 1 2
B2OUT4 AA4 56 BD2-4 1608 10/6.3
AB4 2010 7 8 2125
2
B2OUT3 AB4 BD2-3
5 6
B2OUT2 Y5 Y5
3 4
BD2-2 JUMPER R
B2OUT1 AA5 AA5 BD2-1
AB5 1 2
B2OUT0 AB5 BD2-0
2010
GND1
1 1
from I802
from I801
controlled by POWER6
controlled by POWER7
+3.3VP
+15.5V
70mA 80mA
5 JUMPER R
5
2
22 H 2
R533
3.3K
1005
L501
2518
R534
0
1
I502
PRG_R
VDDMNT
GCFB_R
FRP
VD
2
TC7SG125FU 1
2 1005 1
2SA1980UFG
22 H
L502
2518
1 G VCC 5 2
R544 3
0 2 1
Q531
1 C521 1 Q533
SHCLK_R 2 IN_A
R543 R531 1 2SC5343UFG
2SC5343UFG
1 2.2 2
1005 2 1
1 100 2 10/16 1 10 23
R535
3 GND OUT_Y 4 MVK/SKV
R545 1005 1005 R538
C522
Q532
GCFB_R 1 0 2 2 1 10 2
TG GCFB_R
2 1 R532
1 2.2 2
RESETSH 1005 10/16 2 1005
PW PORTA6 10 2
R536
RESETSH
C510 0.1/10
MVK/SKV 1 3
2
C557
2 1005
SCAN 1
2
TG SCAN 1005
0.1/25
10 H
10 H
2
I2CCLKP
C509
L551
2518
L552
2518
0 2
PW TWOWSC0 I2CCLKP
0.1/10
I2CDATP
1005
R507
1005
1
13.0K-1%2
PW TWOWSD0 I2CDATP
1
R506
1005
1
3
1
VDDMNT Q534
1 3.3K 2
PW PORTC1 VDDMNT JUMPER R
0.1/25
22SA1980UFG
2
FRP
C508
R537
1005
FRP
VD
4 4
1
VD
PRG_R RD1-11
PRG_R 1 2
RD1-10
C511
6 0 5 9 58 57 56 5 5 5 4 53 52 51 50 49 48 47 46 45 44 43 42 41 0.001
RD1-11
DA_IN10
DA_IN11
DGND-58
DGND-47
AGND-46
PVCC-43
CAL_OUT
PGND-41
VDD-57
SHT_O
SHT_I
VDDMNT
GCFB_O
GCFB_1
VCC-45
CAL_IN
CLK
PRG
FRP
VD
P501
RD1-11 C507
RD1-10 1 2 54104-40HUp
RD1-10
RD1-9 RD1-9 R505 APR01 1
RD1-9 61 DA_IN9 SID_OUT 40 0.1/25 10 1 V.COMR
RD1-8 RD1-8 APR02 2
RD1-8 62 DA_IN8 PVCC-39 39 2010 1 PSIG
RD1-7 RD1-7 1 2 APR03 3
RD1-7 63 DA_IN7 SIG_OUT1 38 1 VSSG
RD1-6 RD1-6 C506 3 4 APR04 4
RD1-6 64 DA_IN6 SIG_OUT2 37 1 2 1 VID1
RD1-5 RD1-5 5 6 APR05 5
RD1-5 65 DA_IN5 PGND-36 36 1 VID2
RD1-4 RD1-4 0.1/25 7 8 APR06 6
RD1-4 66 DA_IN4 SIG_OUT3 35 1 VID3
RD1-3 RD1-3 APR07 7
RD1-3 67 DA_IN3 SIG_OUT4 34 1 VID4
RD1-2 RD1-2 R504 APR08 8
RD1-2 68 DA_IN2 PVCC-33 33 10 1 VID5
RD1-1 RD1-1 1 2 APR09 9
RD1-1 69 DA_IN1 SIG_OUT5 32 1 VID6
RD1-0 RD1-0 I501 3 4 APR10 10
RD1-0 70 DA_IN0 SIG_OUT6 31 1 VID7
RD2-11 CXA7007R C505 5 6 APR11 11
from TG part 71 DB_IN11 PGND-30 30 1 2 1
RD2-11 RD2-10 VID8
7 8 APR12 12
RD2-11 72 DB_IN10 SIG_OUT7 29 1 VID9
RD2-10 RD2-9 0.1/25 APR13 13
RD2-10 73 DB_IN9 SIG_OUT8 28 2010 1 VID10
RD2-9 RD2-8 R503 APR14 14
RD2-9 74 DB_IN8 PVCC-27 27 10 1 VID11
RD2-8 RD2-7 1 2 APR15 15
RD2-8 75 DB_IN7 SIG_OUT9 26 1 VID12
RD2-7 RD2-6 3 4 APR16 16
RD2-7 76 DB_IN6 SIG_OUT10 25 1 HVDD
RD2-6 RD2-5 APR17
3
5 6 17
RD2-6
RD2-5
RD2-4
RD2-5
RD2-4
RD2-4
RD2-3
77 DB_IN5
78 DB_IN4
79 DB_IN3
PGND-24
SIG_OUT11
SIG_OUT12
24
23
22
7
2010
8
DCK3_R
DCK4_R
DCK2_R
APR18
APR19
1
1
1
18
19
DCLK2
/DCLK2
/DCLK1
3
RD2-3 RD2-2 APR20 20
ADDR0-11
ADDR1-12
VCOM_OUT
RD2-3 80 DB_IN2 PVCC-21 21 DCK1_R 1
DGND-13
AGND-14
REF_OUT
AGND-18
PGND-20
RD2-2 C504 DCLK1
DB_IN1
DB_IN0
DGND-4
DGND-5
REF_IN
VCC-16
1 2 APR21 21
VDD-3
XCLR
APR22 22
RET
SCL
SDA
RD2-1 0.1/25 HCK2_R 1 HCK2
RD2-0 APR23 23
RD2-0 HST_R 1 HST
1 2 3 4 5 6 7 8 9 10 1 1 1 2 1 3 1 4 15 16 17 18 1 9 2 0 APR24 24
1 HVSS
RD2-1 APR25 25
1 1.0K 2
from TG part 1 VSSG
RD2-0
R525
1005
APR26 26
1 VVSS
APR27 27
ENB 1 ENB
APR28 28
2
VCK_R 1 VCK
R521
4.7K
R523
4.7K
APR29 29
1005
1005
VST_R 1
1.0/10
R526 VST
2
C501
10 2 APR30 30
1 DWN 1 DWN
1
APR31 31
1
PCG 1
1.0/10
0.1/25
PCG
2
2
R522
4.7K
R524
4.7K
C502
C503
33
1005
1005
TEST1
34
1
1
TEST2
1
APR35 35
SCAN 1 RGT
36
SOUT
R502 1 0 2
APR37 37
R501
1 0 2 1005
1 VVDD
R539 APR38 38
1 V.COML
1 0 2 APR39 39
GND1 1 GCFB
1005
R541 40
2
1005
+3.3VI2C
1 1.0K 2
1005 R542
[I2C slave address : 70h] 1
C551
2
G1
N.C.
2
1 1.0K 2 10/16 G2
1005 MVK/SKV
C552
I2CCLKP
I2CDATP
RESETSH
1 2
SCAN
0.1/25
C553
1 2
10/16
MVK/SKV
C554
1 2
0.1/25
C555
2 1
0.1/25
C556
1 2
10/16
MVK/SKV
R540
1 0 2
1005
1 GND1
1
+3.3VP
+15.5V
70mA 80mA
JUMPER R
5 5
2
22 H 2
R633
3.3K
1005
L601
2518
R634
0
1
I602
PRG_G
VDDMNT
GCFB_G
FRP
VD
2
TC7SG125FU 1
2 1005 1
2SA1980UFG
22 H
L602
2518
1 G VCC 5 2
R644 3
1 0 2 1
Q631
C621 1 Q633
SHCLK_G 2 IN_A
R643 R631 1 2SC5343UFG
2SC5343UFG
1 2.2 2
1005 2 1
1 100 2 10/16 10 2
R635
1 3
3 GND OUT_Y 4 MVK/SKV
R645 1005 1005 R638
C622
Q632
GCFB_G 1 0 2 2 1 10 2
TG GCFB_G
2 1 R632
1 2.2 2
RESETSH 1005 10/16 2 1005
PW PORTA6 1 10 2
R636
RESETSH
C610 0.1/10
MVK/SKV 3
2
C657
2 1005
XSCAN 1
2
TG XSCAN 1005
0.1/25
10 H
10 H
2
I2CCLKP
C609
L651
2518
L652
2518
0 2
PW TWOWSC0 I2CCLKP
0.1/10
I2CDATP
1005
R607
1005
1
13.0K-1%2
PW TWOWSD0 I2CDATP
1
R606
1005
1
3
1
VDDMNT Q634
1 3.3K 2
PW PORTC1 VDDMNT JUMPER R
0.1/25
22SA1980UFG
2
FRP
C608
R637
1005
FRP
VD
1
VD
PRG_G GD1-11
PRG_G 1 2
4 GD1-10
6 0 5 9 58 57 56 5 5 5 4 53 52 51 50 49 48 47 46 45 44 43 42 41
C611
0.001
P601
DOWN
54132-40HLow 4
GD1-11 G2
DA_IN10
DA_IN11
DGND-58
VDD-57
VDDMNT
DGND-47
AGND-46
SHT_O
GCFB_O
GCFB_1
VCC-45
PVCC-43
CAL_OUT
PGND-41
CAL_IN
SHT_I
CLK
PRG
FRP
VD
GD1-11 C607 G1
GD1-10 1 2
GD1-10
GD1-9 GD1-9 R605 APG40 40
GD1-9 61 DA_IN9 SID_OUT 40 0.1/25 10 1 V.COMR
GD1-8 GD1-8 APG39 39
GD1-8 62 DA_IN8 PVCC-39 39 2010 1 PSIG
GD1-7 GD1-7 1 2 APG38 38
GD1-7 63 DA_IN7 SIG_OUT1 38 1 VSSG
GD1-6 GD1-6 C606 3 4 APG37 37
GD1-6 64 DA_IN6 SIG_OUT2 37 1 2 1 VID1
GD1-5 GD1-5 5 6 APG36 36
GD1-5 65 DA_IN5 PGND-36 36 1 VID2
GD1-4 GD1-4 0.1/25 7 8 APG35 35
GD1-4 66 DA_IN4 SIG_OUT3 35 1 VID3
GD1-3 GD1-3 APG34 34
GD1-3 67 DA_IN3 SIG_OUT4 34 1 VID4
GD1-2 GD1-2 R604 APG33 33
GD1-2 68 DA_IN2 PVCC-33 33 10 1 VID5
GD1-1 GD1-1 1 2 APG32 32
GD1-1 69 DA_IN1 SIG_OUT5 32 1 VID6
GD1-0 GD1-0 I601 3 4 APG31 31
GD1-0 70 DA_IN0 SIG_OUT6 31 1 VID7
GD2-11 CXA7007R C605 5 6 APG30 30
from TG part 71 DB_IN11 PGND-30 30 1 2 1 VID8
GD2-11 GD2-10 7 8 APG29 29
GD2-11 72 DB_IN10 SIG_OUT7 29 1 VID9
GD2-10 GD2-9 0.1/25 APG28 28
GD2-10 73 DB_IN9 SIG_OUT8 28 2010 1 VID10
GD2-9 GD2-8 R603 APG27 27
GD2-9 74 DB_IN8 PVCC-27 27 10 1 VID11
GD2-8 GD2-7 1 2 APG26 26
GD2-8 75 DB_IN7 SIG_OUT9 26 1 VID12
GD2-7 GD2-6 3 4 APG25 25
GD2-7 76 DB_IN6 SIG_OUT10 25 1 HVDD
GD2-6 GD2-5 5 6 APG24 24
GD2-6 77 DB_IN5 PGND-24 24 DCK3_G 1 DCLK2
GD2-5 GD2-4 7 8 APG23 23
GD2-5 78 DB_IN4 SIG_OUT11 23 DCK4_G 1 /DCLK2
GD2-4 GD2-3
3
22
3
2010 APG22
GD2-4 79 DB_IN3 SIG_OUT12 22 DCK2_G 1 /DCLK1
GD2-3 GD2-2 APG21 21
ADDR0-11
ADDR1-12
VCOM_OUT
GD2-3 80 DB_IN2 PVCC-21 21 DCK1_G 1
DGND-13
AGND-14
REF_OUT
AGND-18
PGND-20
GD2-2 C604 DCLK1
20
DB_IN1
DB_IN0
DGND-4
DGND-5
REF_IN
VCC-16
1 2 APG20
VDD-3
DIRC
XCLR
APG19 19
RET
SCL
SDA
GD2-1 0.1/25 HCK2_G 1 HCK2
GD2-0 APG18 18
GD2-0 HST_G 1 HST
1 2 3 4 5 6 7 8 9 10 1 1 1 2 1 3 1 4 15 16 17 18 1 9 2 0 APG17 17
1 HVSS
1 1.0K 2
GD2-1 from TG part APG16 16
1
R625
1005
VSSG
GD2-0 APG15 15
1 VVSS
APG14 14
ENB 1 ENB
R626 APG13 13
2
VCK_G 1 VCK
10 2 APG12 12
R621
4.7K
R623
4.7K
1
1005
1005
VST_G 1 VST
1005 APG11 11
DWN 1
1.0/10
DWN
2
1.0/10
C601
APG10 10
1
2
C602
CLR 1 DIN
0.1/25
APG09 9
2
C603
2
2
1
PCG 1 PCG
1 8
R622
4.7K
R624
4.7K
1005
1005
TEST1
1
7
TEST2
APG06 6
1
XSCAN 1 RGT
5
SOUT
R602 1 0 2
APG04 4
R601
1 0 2 1005
GND1 1 VVDD
R639 APG03 3
1 V.COML
1 0 2 APG02 2
1 GCFB
1005
1005 1
R641 N.C.
1 1.0K 2 [I2C slave address : 78h] C651
+3.3VI2C
2 1005 R642
1 1.0K 2
1005
1 2
10/16
MVK/SKV
C652
2
I2CCLKP
I2CDATP
RESETSH
1 2
XSCAN
0.1/25
C653
1 2
10/16
MVK/SKV
C654
1 2
0.1/25
C655
2 1
0.1/25
C656
1 2
10/16
MVK/SKV
R640
1 0 2
1005
1 1
GND1
+3.3VP
+15.5V
70mA 80mA
JUMPER R
5 5
2
22 H 2
R733
3.3K
1005
L701
2518
R734
0
1
I702
VDDMNT
PRG_B
GCFB_B
FRP
VD
2
TC7SG125FU 1
2 1005 1
2SA1980UFG
22 H
L702
2518
1 G VCC 5 2
R744 3
1 0 2 1
Q731
C721 1 Q733
SHCLK_B 2 IN_A
R743 R731 1 2SC5343UFG
2SC5343UFG
1 2.2 2
1005 2 1
1 100 2 10/16 10 2
R735
1 3
3 GND OUT_Y 4 MVK/SKV
R745 1005 1005 R738
C722
Q732
GCFB_B 1 0 2 2 1 10 2
TG GCFB_B
2 1 R732
1 2.2 2
RESETSH 1005 10/16 2 1005
PW PORTA6 1 10 2
R736
RESETSH
C710 0.1/10
MVK/SKV 3
2
C757
2 1005
SCAN 1
2
TG SCAN 1005
0.1/25
10 H
10 H
2
I2CCLKP
C709
L751
2518
L752
2518
0 2
PW TWOWSC0 I2CCLKP
0.1/10
I2CDATP
1005
R707
1005
1
13.0K-1%2
PW TWOWSD0 I2CDATP
1
R706
1005
1
3
1
VDDMNT Q734
1 3.3K 2
PW PORTC1 VDDMNT JUMPER R
0.1/25
22SA1980UFG
2
FRP
C708
R737
1005
FRP
VD
1
VD
4 PRG_B
PRG_B BD1-11
BD1-10 1 2
4
C711
6 0 5 9 58 57 56 5 5 5 4 53 52 51 50 49 48 47 46 45 44 43 42 41 0.001
BD1-11
DA_IN10
DA_IN11
DGND-58
VDD-57
VDDMNT
GCFB_O
GCFB_1
DGND-47
AGND-46
VCC-45
SHT_O
SHT_I
CAL_IN
PVCC-43
CAL_OUT
PGND-41
CLK
PRG
FRP
VD
P701
BD1-11 C707
BD1-10 1 2 54104-40HUp
BD1-10
BD1-9 BD1-9 R705 APB01 1
BD1-9 61 DA_IN9 SID_OUT 40 0.1/25 10 1 V.COMR
BD1-8 BD1-8 APB02 2
BD1-8 62 DA_IN8 PVCC-39 39 2010 1 PSIG
BD1-7 BD1-7 1 2 APB03 3
BD1-7 63 DA_IN7 SIG_OUT1 38 1 VSSG
BD1-6 BD1-6 C706 3 4 APB04 4
BD1-6 64 DA_IN6 SIG_OUT2 37 1 2 1 VID1
BD1-5 BD1-5 5 6 APB05 5
BD1-5 65 DA_IN5 PGND-36 36 1 VID2
BD1-4 BD1-4 0.1/25 7 8 APB06 6
BD1-4 66 DA_IN4 SIG_OUT3 35 1 VID3
BD1-3 BD1-3 APB07 7
BD1-3 67 DA_IN3 SIG_OUT4 34 1 VID4
BD1-2 BD1-2 R704 APB08 8
BD1-2 68 DA_IN2 PVCC-33 33 10 1 VID5
BD1-1 BD1-1 1 2 APB09 9
BD1-1 69 DA_IN1 SIG_OUT5 32 1 VID6
BD1-0 BD1-0 I701 3 4 APB10 10
BD1-0 70 DA_IN0 SIG_OUT6 31 1 VID7
BD2-11 CXA7007R C705 5 6 APB11 11
from TG part 71 DB_IN11 PGND-30 30 1 2 1 VID8
BD2-11 BD2-10 7 8 APB12 12
BD2-11 72 DB_IN10 SIG_OUT7 29 1 VID9
BD2-10 BD2-9 0.1/25 APB13 13
BD2-10 73 DB_IN9 SIG_OUT8 28 2010 1 VID10
BD2-9 BD2-8 R703 APB14 14
BD2-9 74 DB_IN8 PVCC-27 27 10 1 VID11
BD2-8 BD2-7 1 2 APB15 15
BD2-8 75 DB_IN7 SIG_OUT9 26 1 VID12
BD2-7 BD2-6 3 4 APB16 16
BD2-7 76 DB_IN6 SIG_OUT10 25 1 HVDD
3
BD2-6 BD2-5
BD2-6
BD2-5
BD2-5
BD2-4
BD2-4
BD2-3
77 DB_IN5
78 DB_IN4
PGND-24
SIG_OUT11
24
23
5
7
2010
6
8
DCK3_B
DCK4_B
APB17
APB18
APB19
1
1
17
18
19
DCLK2
/DCLK2
3
BD2-4 79 DB_IN3 SIG_OUT12 22 DCK2_B 1 /DCLK1
BD2-3 BD2-2 APB20 20
ADDR0-11
ADDR1-12
VCOM_OUT
BD2-3 80 DB_IN2 PVCC-21 21 DCK1_B 1
DGND-13
AGND-14
REF_OUT
AGND-18
PGND-20
BD2-2 C704 DCLK1
DB_IN1
DB_IN0
DGND-4
DGND-5
REF_IN
VCC-16
1 2 APB21 21
VDD-3
XCLR
APB22 22
RET
SCL
SDA
BD2-1 0.1/25 HCK2_B 1 HCK2
BD2-0 APB23 23
BD2-0 HST_B 1 HST
1 2 3 4 5 6 7 8 9 10 1 1 1 2 1 3 1 4 15 16 17 18 1 9 2 0 APB24 24
1 HVSS
BD2-1 APB25 25
from TG part 1 VSSG
BD2-0 APB26 26
1 1.0K 2
1 VVSS
R725
1005
R726 APB27 27
ENB 1 ENB
1 10 2 APB28 28
2
VCK_B 1 VCK
R721
4.7K
R723
4.7K
APB29 29
1005
1005
1005 VST_B 1
1.0/10
VST
2
C701
APB30 30
DWN 1 DWN
1
APB31 31
1
CLR 1 DIN
0.1/25
APB32 32
2
2
C703
PCG 1
1.0/10
PCG
2
R722
4.7K
R724
4.7K
C702
33
1005
1005
TEST1
1
34
1
TEST2
1
APB35 35
SCAN 1 RGT
36
SOUT
R702 1 0 2
APB37 37
R701
1 0 2 1005
1 VVDD
R739 APB38 38
GND1 1 V.COML
1 0 2 APB39 39
2 1 GCFB
2
1005
1005 40
[I2C slave address : 7Ch] N.C.
R741 C751
1 1.0K 2 1 2
G1
+3.3VI2C
10/16 G2
1005 R742
MVK/SKV
1 1.0K 2 C752
1 2
1005
I2CCLKP
I2CDATP
RESETSH
0.1/25
SCAN
C753
1 2
10/16
MVK/SKV
C754
1 2
0.1/25
C755
2 1
0.1/25
C756
1 2
10/16
MVK/SKV
R740
1 0 2
1 1005
1
GND1
MVK/SKV
47/6.3
1
CV32
JUMPER R
2
CHSOG1
CHR1
CHG1
CHB1
GND1
RV48
1
1
1
1
RV49 1 10 2 B
DSUB1_B
RV50 1 10 2 G
DSUB1_G 1005
1 10 2 1005 R
DSUB1_R
DSUB1_H 1005
DSUB1_V
RV54
1 75-1% 2
1 75-1% 2
1 75-1% 2
SOG
2 75-1% 1
RV39
1005
RV40
1005
RV44
1005
SOG
2 75-1% 1
1005
RV51
1005
2
QV09
RV45
1005
680
1 47K 2
RV47
RV53
1005
RV46 2SC5343UFG
B 0.01
220 2
*CV30
0 2
B 0.01
5
B 0.01
C 10P
C 10P
5
2
1
1 3
*CV26
1005
CV38
2
*CV20
C 10P
1005
CV39
1005
1005
2
2
CV37
1005
1005
GND1 1
1005 1 1005 2
1
CV33
CV47
1470p
2
1
1005
1
2 1 RV42 1 RV61
10/6.3 1 56 23 QV04 1 33 2
22p-C
2
2SA1980UFG
CV35
1005
2125 1005 1005 *QV12 *QV13 *QV14
2
1 RV52 2 2 SRC1202EF SRC1202EF SRC1202EF
1 RV62 2
1
F_SD/HD 2 2 2
1005
3
470
0
1005 3 3 3
1 RV38 2
4.7/6.3
2
1005
CV34
1
22K
QV03
F_SD/HD SRC1202EF 1 1 1
1
CV33
0 OFF(HD) 22uF -> 10uF
RV53
22k -> 47k
1 480i/p,576i/p RV38
10k -> 22k
*RV37 GND1 GND1
0
1 2
RGB1/2
1005
RGB1/2
0 RGB1
1 RGB2
CHSOG2
4
CHR2
CHG2
CHB2
*RV86
4
1
*RV85 1 10 2 B
DSUB2_B
*RV84 1 10 2 G
DSUB2_G 1005
1 10 2 R
DSUB2_R 1005
DSUB2_H 1005
*RV88
DSUB2_V
2 75-1% 1 SOG
1005
1 75-1% 2
1 75-1% 2
1 75-1% 2
*RV81
*RV82
*RV83
1005
1005
1005
B 0.01
B 0.01
B 0.01
*CV52
C 10P
C 10P
*CV50
*CV54
C 10P
CV53
2
2
1005
CV51
1005
1005
1005
CV55
1005
1005
1
1
GND1
*QV22 *QV23 *QV24
SRC1202EF SRC1202EF SRC1202EF
2
2 2 2
*RV36
1005
680
3 3 3
1
1 1 1 I201
ANALOG INPUT PORT PW190
*QV15
SRC1202EF CV05 0.047/10 1005 1 2
2 R5 R5 RMUXIN0
CV04 0.047/10 1005 1 2 T5 T5 GMUXIN0
3 3 CV03
CV06
0.1/10
0.047/10
1005
1005 2
1 2
U5 U5 SMUXIN0
3
CHSOG2C
1 V5 V5 BMUXIN0
CHB2C
CHG2C
CHR2C
1
RMUXOUT W2 W2 1
1
CV10 0.047/10 10051 2 R3 R3 RMUXIN1 CHRMUX
CV08 0.047/10 10051 2 T3 T3 GMUXIN1
CV07 0.1/10 10051 2 U3 U3 SMUXIN1
CV09 0.047/10 10051 2 V3 V3 BMUXIN1
GND1
BMUXOUT W4 W4 1
CV140.047/10 1005 1 2
1 10K 2
2
8
6
4
P1 P1 RMUXIN2 CHBMUX
2010
*RV63
RV87
1005
CV120.047/10 1005 1 2
10K
R1 R1 GMUXIN2
CV40 0.1/10 1005 1 2 T1 T1 SMUXIN2
CV130.047/10 1005 1
7
5
1
3
2 U1 U1 BMUXIN2
RV04
1 10K 2AD11
1005
AD11 FB
1 2
GND1
7 8 P2
RV64 P2 ASPECT0
10K 5 6 P4
P4 ASPECT1
2010 3 4 P5
P5 ASPECT2
+3.3V
1 RV03 21 RV70 2 P6 P6 REXT
SDS511
SDS511
SDS511
2
RV05
1 10K 2
DV10
DV08
DV11
22K-1% 1.2K-1%
1005 1005 1005
AD6 AD6
APVG GND1 HSYNCIN0
1
EV01
CHSOG1C
AF11 AF11 VS0
CHR1C
CHB1C
CHG1C
LAP5100-0705F
1
1 2
SDS511
SDS511
SDS511
2
CV41
1
DV09
DV07
DV12
2
Y3 Y3
2
GAI1
1
CV42
0.047/10 1005 AA2 AA2 SOG1
77 1CV462 0.1/10
2 1 1005 AB3 AB3 BAI1
GND1 0.047/10 1005 AC7 AC7 HSYNCIN1
CVBS 1005 AE11 AE11
CHSY1
CHSC1
VS1
CHV1
APSC
RV74 RV72
CV43 NC-AE1 AE1 AE1 1
1
44 1 15-1% 21 20-1% 2 1 2
1
B 0.1
12K-1% 1.0K-1%
CV49
2
1 RV35 21 RV66 2
1005
2 1 1 3 CV57 0.047/10 1005 1 2 AF1 AF1 1005 1005
GAI3
HV07 2
1
1
SC200JT BAI3
11 2125 1 RV32 21 RV67 2
APSY
22 18-1% 22-1% AF5 AF5
APCV ADCXIN GND1
RV34 RV68 AE6 AE6 ADCXOUT NC-AE7 AE7 AE7 1
1 15-1% 21 20-1% 2
1
1470-1%2
1 3 CHAE7
HV08 2
RV01
1005
RV25 RV69 U2
SC200JT U2 AISO0
2125 1 18-1% 21 22-1% 2 U4 U4 AISO1
1 RV02 2 W1 W1 AISO2
1.0M-1% Y2 Y2 AISO3
1005
AC1 AC1 AISO4
AD5 AD5 PLLISO0
XV01
SMD-49 AC6 AC6 PLLISO1
CV01 1
10p-C 2
27.000MHz
10p-C
2
2
CV02
1005
1005
1 1
1
GND1
GND1 GND1 GND1
MVK/SKV
47/6.3
1
1 47K 2
CS01
1 10K 2
RS03
1005
1005 RS06
2
1 47K 2
RS04
1005
0 GND1
1 2
56 1
RS08
1005
1 100 2
1005 DSUB2_B
0.1/10
1
CS02
1005
RS02
1005
8
5
DSUB2_G
SDA
2
VCC
WP
SCL
*RS90
56 1
S-24CS02AFJ-TB-G
2
DSUB2_R
1 0 2
RS09
1005
APDG
*RS91 1005
1
1 0 2
IS01
2
QS02
SRC1202EF *RS92
1005
SC200JT
2
0 2
HS11
2125
1
3 1
2
ES01 3 1005
GND
A0
A1
A2
3114-15FA *CS03
SC200JT
10/6.3
HS12
2125
1 2 1
3 1
4
2
1 47K 2
2125 CS09
APCL
RS01
1005
15 G2 5 1 2
8
6
4
2
*IS02
2010
RS07
1 EL8302IUZ-T7 *RS34
RGB IN 1
SCL GND 1.0p-C
0
HS10 10 INA+ INA- 1560-1%2 1005
1 16
1 SC200JT
3
5
7
1
*RS37
1 33K 2
1 33K 2
1 33K 2
SYNC 1005
5
APV 2125
*RS16
*RS15
*RS14
1 75-1% 2
1005
1005
1005
1 3 V14 GND 4
2
CEA - OUTA
15 DSUB1_B
2 + *RS33
VCLK 1005
SDS511
2
*DS06
9 HS08 2560-1%1
API1B 3 VS- VS+ 14
SC200JT
PLUG *RS23 1005
2125
1
APH *CS06
1
0 2
13 3 1 3 1 2 B 1
4
CEB + OUTB
13
1 2 - *RS32 *RS36
1 75-1% 2
1 8.2K 2
H B
GND B 10/6.3 1005
SDS511
SDS511
2
2
*RS13
*DS03
*DS07
*RS19
HS07 1560-1%2 1 75-1% 2
1005
8 API1G 2125 INB+ INB-
SC200JT 5 12 DSUB1_G
*RS22 1005 CS08 1005
2125
1
APDA *CS05
1
12 2 1 2G 1 0 2 2 1
1 3 6 NC-6 NC-11 11
1 2
1 75-1% 2
1 8.2K 2
SDA G/Y
GND G/Y 10/6.3 1005
SDS511
SDS511
1.0p-C
2
*RS12
*DS08
*RS18
HS06
DS04
1005
7 API1R 2125 CEC + OUTC 1005
SC200JT 7 10
*RS21 - *RS30 *RS35
2125
1
*CS04
1
11 1 1 2R 1 0 2 INC+ INC- 1560-1%2 1 75-1% 2
1 3
SC200JT
8 9 DSUB1_R
2
HS09
2125
1 3
1 75-1% 2
1 8.2K 2
R
GND R 10/6.3 1005 1005 1005
SDS511
2
2
CS07
*RS11
*DS05
*RS17
1005
6 2125 1 2
0 2
SDS511
SDS511
2
2
*DS15
*DS16
*RS95
1005
G1
1 100 2
1 *RS31 2
1.0p-C
560-1%
1
*RS72
1005
1005
1005
1560-1%2
1
*RS29
1005
1
0 2
*CS18
*RS96
1 RS26 2
1 RS28 2
1005
SDS511
SDS511
10/6.3
2
*DS10
*DS09
1005
1005
2 1
10K
10K
GND1 CS24
1
2125
1
*IS03 1 2
EL8302IUZ-T7 *RS59
1 33K 2
1 33K 2
1 33K 2
1.0p-C
*RS43
*RS42
*RS41
GND1 1560-1%2
1005
1005
1005
INA+ INA- 1005
APDG2 ES02 1 16
0 2
*RS97
1005
1005
3114-15FA
1 75-1% 2
1
CEA - OUTA
*RS62
2 15
4 4
+
*RS49 B *RS58
1
*CS21 0 2
15 G2 5 1 2 1 2560-1%1
3 VS- VS+ 14
2
SCL GND
1 8.2K 2
*RSA7
1005
10K
*RS46
1005
10 2125 CEB + OUTB
4 13
SYNC *RS48 G - *RS57
1
GND *CS20 0 2
V14 4 1 2 1 INB+ INB- 1560-1%2
API2B 5 12
1
SDS511
VCLK
2
1 8.2K 2
1 75-1% 2
*DS14
1005 1005 CS23
SC200JT
APV2 10/6.3
*RS45
*RS61
HS15
HS17
2125
1005
9 2125 2 1
1
1 3
6 NC-6 NC-11 11
2
SC200JT
*RS47 R
1
PLUG 2125 1.0p-C
APH2 *CS19 0 2
13 3 1 3 1 2 1 CEC + OUTC 1005
7 10
1 B 2
1 75-1% 2
H B - *RS55
1 8.2K 2
1005
SC200JT
GND 10/6.3
SDS511
SDS511
*RS40
2
API2G
*DS11
*DS17
*RS44
HS14 1560-1%2
HS16
2125
1005
8 2125 INC+ INC-
1 3
8 9
2
SC200JT
1
1 100 2
2125 1005
1
CS22
*RS73
1005
12 2 1 2
1 75-1% 2
1 3
*RS60
SDA G/Y G/Y 2
1 75-1% 2
1560-1%2
1 *RS56 2
GND 1.0p-C
SDS511
SDS511
560-1%
*RS39
API2R
*DS18
*RS54
HS13
DS12
1005
1005
7 1005
SC200JT
1
2125
1
11 1 1 3
R 2
1 75-1% 2
GND R
*RS38
SDS511
SDS511
SDS511
6
2
2
*DS13
*DS21
*DS22
G1
1
+3.3V
*RS98
1 10K 2
*RS68
1 100 2
1005
DSUB2_H
*RS99
1 RS51 2
1 RS53 2
1005
SDS511
SDS511
2
2
*DS20
*DS19
1 100 2
1005
1005
10K
10K
2
DSUB2_V
RSA2
1005
3 1 100 2
*QS01
3
1
1005 SRC1202EF
2
GND1 GND1 2
RSA1
1005
*RS67 L:RGB1/H:RGB2
0
8
6
4
2
*IS11 3 1 100 2
2010
RSA3
RGB1/2
100
SN74LVC1G125DCK
1
->TC7SZ125FUTE85L 1005
1
1 47K 2
5
3
7
*RS66
RX_DSUB OE Vcc
1005
1 5
RS81 RS74
TX_DSUB H2 1 100 2 1 0 2
2 A HS *RS88 *RS75
47p-C
1005 1005
2
CS27
1005
232EN_DSUB 1 0 2 1 100 2 H
3 GND Y 4 DSUB1_H
1
1005 *IS13 1005
*CS10 SN74LVC1G126DCK
0.01/16 ->TC7SZ126FUTE85L
GND1
2 1 1 OE Vcc 5
RS77 1005
H1 1 100 2
2 A
47p-C
1005
2
CS14
1005
*IS12
SN74LVC1G125DCK 3 GND Y 4
1
->TC7SZ125FUTE85L
*CS11
1 OE Vcc 5
*ES11 RS82
*HS02
501331-14V
SC200JT
V2 1 100 2
2 1
0.01/16 1 RS83 2
Audio/RGB OUT
2125
2 A VS 1005
*HS05 1005 *RS89 0 *RS76
1APOR 1 3 1 100 2 V
1
SC200JT 1 0 2 1005
47p-C
2
2 DSUB1_V
CS28
1005
3 GND Y 4
2125 1005 *IS14 1005
2 APOG *HS01
1 3
1
1
SC200JT SN74LVC1G126DCK
2 ->TC7SZ126FUTE85L
2125
3 APOB 1 3
1
1 OE Vcc 5
2
2 2
RS78
4 *HS03 V1 1 100 2
2 A
SC200JT *RS84
47p-C
1005
2
CS15
1005
2125
5 1 3 *HS04 1220-1%2
3 GND Y 4
APV3 APH3
2 SC200JT
1
1
*RS86
2125 *IS15
6 1 3 1220-1%2 *RS85 SN74LVC1G125DCK
2 1220-1%2
1
->TC7SZ125FUTE85L
*RS87
7 *HS21
SC200JT 1220-1%2 1 OE Vcc 5
*RS79 *RS93
2125 GND1
8 APLOO 1 3 *HS22 1 100 2 1 100 2
1
2 A
2 SC200JT
1005
HS 1005 *RS94
2125
9 APLOI 1 100 2
47p-C
1 3
1
2
CS16
1005
3 GND Y 4
2
1005
1
10 *HS23
SC200JT
2125
11 APROI *HS24 1 3
1
SC200JT 2
2125
12 APROO 1 3 HS25
1
2 SC200JT *CS12
0.01/16
2125
13 APTX HS26 1 3
1
SC200JT 2 2 1
1005
2125
14 APRX 1 3
1
*IS16
2
SN74LVC1G125DCK
->TC7SZ125FUTE85L
G1
G2 1 OE Vcc 5
*RS80
1 100 2
2 A
1005
VS
GND1
1
RX
1
47p-C
2
CS17
1005
3 GND Y 4
1
TX
R out
R_OUT_O
R out GND1
R_OUT_I
L_OUT_I
A B C D E F G
CONFIDENTIAL
6 6
RA40
POWER7
2 100 1
RA42
1005
POWER5
2 100 1
1005
IA03
MM1665AHBE
CA36
5 4 1 2
Cont Cn
470p
6 3 1005
NC-6 G1 GND
7 2
RA41 NC-7 NC-2
100 5V
1 2 8 1
Vin Vout +5VAUDIO
1005
IA01 +6.6V
BD3870FS CA54
10/6.3
0.33/10
2
CA38
2125
1 VIN1 CAP 24
MPEG Audio R - in 1 2
1
PL_R_IN CA55
1.0/10
1.0/10
0.0022
2CA291
2CA371
1 2
5 5
VIN2 TNF1 23
1.0/16
1.0/16
2
2
CA07
CA08
MPEG Audio L - in
PL_L_IN CA56 0.0022
1 2
1
3 SEL2 TNF2 22
RA45
RA43 CA32 1 2 1005
4 SEL1 BNF2 21 5.6K
1 0 2 0.01/16 1 2
(min 40k max 53k ) APAR1 APAL1
JUMPER R RGB Audio R - in1 RA09 4.7K 1 2 1005 CA33 1 2
APAG 5 A1 BOUT2 20 1005
1 1005 2 CA11 1.0/16 0.01/16 1005
EA01 LA02 RA46
1
1 2
2
2
CA01
1005
APAL3 8 B2 OUT1 17
100p-C
RA01
270K
1005
RA02
270K
1005
11 1 1005 2 *CA14
2
CA02
1005
*RA63 4.7K 1
33 SC200JT
2
9 C1 OUT2 16 LA18 QA08
Audio IN2
1
1
77 1 3 1 1005 2 *CA09 1.0/16 100 H 2SC5343UFG RA49
88 2125 2 *LA54 *RA64 4.7K 1 2 1 2 1 100 2
2
1
SC200JT 10 C2 VCC 15 +15.5V
Audio OUT 22 1 3
2 2125
RGB Audio L - in2 1 1005 2 *CA10 1.0/16 2518 1005
1 1005 2
3
11 FILTER SD 14
100p-C
100p-C
*RA52
*CA04
*CA03
*RA51
270K
2
2
1005
1005
270K
1005
RA48
2
*RA53
1 6.8K 2
270K
*RA541005
JUMPER R
1
12 G N D S C 13
1 1005 2
1005
long pin:R
270K
1
MVK/SKV
47/6.3
CA16 CA17
2
1
1
short pin:L
CA15
0.1/16 47/10
1
1005 MVK/SKV DA06
1
2
2
CA39
1
SDS511
10/16
2
4 MVK/SKV
4
2
DA07
*LA06 CA19 RA11 UDZS9.1B
SC200JT
R - out 1.0/16
1
GND1 1.0K-1%
1 3
2 2125 2 1 1 1005 2
*LA08 CA18 RA12
SC200JT 1.0/16 1.0K-1%
1 3
2 2125 QA07 QA06 RA24 1 100 2 GND1
1 270K 2 2 1 1 1005 2
1 270K 2
L - out 2SC5343UFG 2SC5343UFG
DATA-A
RA03
1005
RA04
1005
1005
2 2
RA14 1.0K
RA13 1.0K
3 3 RA25 1 100 2
1 1005 2
1 1005 2
CLK-A
1 QA03 1 QA02 1005
2SD2114K 2SD2114K
1 270K 2
1 270K 2
100p-C
100p-C
*CA05
*CA06
2
2
1005
1005
RA05
1005
RA06
1005
2 2 TP-R TPGND1 TP-L
3 3
1
2125
1
2 1 1
1 3
2
*LA10 *LA12
RA32
4.7K
1005
RA31
4.7K
1005
SC200JT
SC200JT
2
1 3
1
2125 GND1
UDZS2.0B
UDZS2.0B
1
1
DA05
DA04
2
2
RA26 RA38
DA01 5.6K 5.6K
R out 2 1 1 2 1 2
R_OUT_O +17V
1005 1005
R out SDS511
3 3
2
R_OUT_I
RA28
1005
RA30
1005
1
1
5.6K-1%
5.6K-1%
22K
0
RA16
1005
1005
RA15
1
2
L_OUT_I
SDS511
1
DA03
L out
SDS511
2
QA05
DA02
L_OUT_O SRC1202EF
2
RA29
L out 2.2K
1
1 2
1 100K 2
2 RA27
RA33
1005
0 1005
3 1 2
2SA1980UFG
1
MVK/SKV
1005
47/25
QA04
1
CA28
1 3
0.47/10
1
CA20
APAO+ APAO-
2
2
2
1
RA34
0
TPSP- TPSP+ CA21 1 2
MUTE
680p 1005
1
EASP LA14 1 2
ZH-02H MPZ2012S101A
2125 1005
1 1 2
RA17
82K-1%
LA15
2 1 2 JUMPER R 1 2
MPZ2012S101A 1005
2125 GND1
LA13
2.2 H
2 Connects with
a Speaker
JUMPER R
2 1
2518 2
IA02
47/6.3
MVK/SKV
0.1/16
2
1
CA26
1005
CA25
A3
B3
C3
1 1005 2
TPA6203A1ZQV
RA20
IN-
A3 B3 C3
VO+
VDD
68K
1
1
RA39
100K
1005
RA18
5.6K-1% CA22
2
GND
B2 C2 IN+ 1 2 2 1 QA01
B2 C2
1 2SA1980UFG RA47
1005 0.47/10 10K
680p 1005
SHUTDOWN
2 RA19 1
3
BYPASS
82K-1%
GND1
1
CA23
1005
VO-
2 1005 1
2
4
6
8
2010
GND1
RA23
A1 B1 C1 2
2
0
A1
B1
C1
CA27 4.7/6.3
3
5
1
7
RA22 2.2K
RA21 68K
2
2
2
1005
1005
0.47/10
2
CA24
1
1
1
1
Audio GND
A_GND
1 1
1
SH-04H
6 6
1
1
RXD_CT
2
TXD_CT
2 10K 1
RK32
1005
3
SDS511
2
DK21
4 *RK35
1
1
0
*QKA2 1 2
AP5VJ SRC1202EF
G1 2 1005
*RKA9
1.0/10
G2 100
2
CK04
IK01 1 2 3
APGDJ
1 DS14C232CM 1005
1
*RKA8 1
1 C1+ VCC 16 10K
1 2
1.0/10
2
*RKA6
CK03
1005 *IKA1 XK25 IK21
GND1 2 V+ GND 15 100
1 2 SN74LVC1G125DCK 6.00MH RRX6000-0702L
1
CSTCR_G CK22
Dout1 1005 2 1
3 C1- 14 1 OE Vcc 5 1 VSS1 /RST 28
*QKA3
4.7/6.3
1.0/6.3
1.0/6.3
2
SRC1202EF
CK28
2 2125
0.1/16CK27
1005
Rin1 1005
1 1.0M 2
C2+ 2 A 3 OSC1 PTA0 27
1.0/16
4 13 2 2
2
5
*RKA7
CK02
RK28
1005
1
1005 1
100
CK24
Rout1 1 2 3 2
1
5 C2- 12 3 GND Y 4 3 OSC2 PTA1 26
1005 1 RK30
1
Din1 1 1 0 2
6 V- 11 *CKA1 4 VREG PTA2 25
RK03 RK04 1.0/10 1005
2 100 1 Dout2 Din2 2 100 1 1 2
TX 7 10 5 VDD PTA3 24
RK02 1005 1005 RK05
1.0/6.3
2 100 1 2 2.2K 1
0.1/16
2
Rin2 Rout2
CK26
1005
1
CK25
1005
RX 8 9 6 PTD0 PTE0/TCLK 23
1005 RK06 1005
2
1 3.3K 2
PTD1 PTE2/TCH1 22 +3.3V
1.0/16
7
1
CK01
1005
*IKA2
2
PTD2 PTA4 21
SDS511
8
2
*DK01
SN74LVC1G125DCK
+5V
2 10K 1
1
*RKA2
RK36
1005
0
2 A 10 PTD4 PTA6 19
1 2 RMT RMT
GND1 *RKA5 RK27 1005
SDS511
2
100
*DK02
(L:USB H:RS232C) 1 2 1 100 2
3 GND Y 4 11 PTE1/TCH0 PTA7 18
1005 1005
1 47K 2
*RKA4
RXD 12 PTE3/D+ PTD5 17
4
RK31
1005
1
100
1005
2
*RKA3
100 GND1 13 PTE4/D- PTD6 16
4
2
1 2 TXD
*RKA1
1005
10K
1 220 2
USB 3 1005 RK23
1 220 2
1 1005 RK26
DK22
APUBV APUBM APUBP 1 100 2 1 2
1005 SDS511
2
EK01
1
1
1
1.0/6.3
RK29
1005
UBB-4R-D14C
2
CK21
1005
0
G1 G1
1
1
1 1
RK33
2 2 1 220 2
USBDM
1005 RK34
3 3 1 220 2
USBDP
3
1005
4 4
3
G2 G2
GND1
1
APUBG
RX_DSUB
TX_DSUB
232EN_DSUB
PWM_G
+5V
2 2
210K-1%1
RE93
RE99
1005
1 100 2
+3.3V
1005
16.8k-1%2
2 SDS511
REA5
1005
DE08
16
15
14
13
IE14
ADXL322
16
15
14
13
RE98
NC-16
VS-15
VS-14
NC-13
1
15.1K-1%2
RE96
115K-1%2
1005 IE15
0.1/10
0.1/10
1CE242
1CE262
1 0 2
1005
REA2
1005
1005
NC-1 XOUT LM358AD
12 11 10
1
9 10 11 12
4 3 2 1
G1
2 RE92 1
YOUT 10K-1%
4.7/6.3
2.7K-1%
COM-3
3
2
CE28
2125
1005
NC-9 1005
4.7/6.3
NC-4 2 1IN- 2OUT 7 GSENSOR
4
2
CE27
2125
2 1
1
COM-5
COM-6
COM-7
NC-8
CE30
4.7/6.3
1 3 1IN+ 2IN- 6
2
1.0/10
CE25
2125
2 1
210K-1%1
0.01/16
5
6
7
8
4 GND 2IN+ 5
2
5
6
7
8
1005
REA1
CE31
1005
16.2k-1%2
1 1CE322
1
REA3
1005
CE29
1
0.1/10 1.0/10
1005 2 1
GND1
PWB assembly MAIN 12 (M1-20ED)
A B C D E F G
CONFIDENTIAL
6 6
USBCANT
5
*RP25 3 3 4
*RP33 1 2 2010
5
TXD_JP M2 M2 RXD I/O CAS B9 B9 CAS O O MA6 A4 A4 MA6 I/O DISP26 R17 R17 GB7
N1 N1 P3 7 8 1 0 2 5 6 100 C4 5 6 100 T16
SCK SCK I/O I/O INT4 P3 MA17 O MA5 C4 MA5 I/O DISP25 T16
N3 5 6 *RP19 CP01 1005 *RP27 7 8 2010 C9 C9 A3 7 8 2010 T17 1 2
I/O INT3 N3 NWE O O MA4 A3 MA4 I/O DISP24 T17 GR2
*RP20 0 23 4 10K 15p-C 0 2 4*RP46
I/O INT2 L4 L4 1 MA16
1
O MA3 B3 B3 1 2
MA3 I/O DISP23 J16 J16 3
GR1
2010 1005
H3 G2 1005 1 2 1 2 1005 A10 A10 B4 3 4*RP34 J17 5 6 220
USBAP H3 DP I/O I/O INT1 G2 DGMU DQMU O O MA2 B4 MA2 I/O DISP22 J17 GR0
*RP30 5 6 100 7 8 2010
1 1.0M 2
USBAM H4 H4 DM I/O 1 DGML B10 B10 DQML O O MA1 C5 C5 MA1 I/O DISP21 N14 N14 GR7
*XP01 0 2
RP05
1005
G4 GND1 1 B5 7 8 2010 N15
USBP1 G4 USBP1 I/O 12MHz CP02 MA15 O MA0 B5 MA0 I/O DISP20 N15
1 F1 J1 *RP04 SMD-49 15p-C 1005 *RP26 N16 1 2
USBP0 F1 USBP0 I/O I MCLKI J1 I/O DISP19 N16 GG1
1 K2 1100-1%2 2 1 2 1005 1 0 2
A15 1 2 P14 3 4*RP47
O MCLKO K2 NWE I/O UD7 A15 MD15 I/O DISP18 P14 GG0
L17 *RP06 1005 1 2 1005 B14 3 4
*RP35 P15 5 6 220
I VCLKI L17 I/O UD6 B14 MD14 I/O DISP17 P15 GG7
1330-1% 2 CP03 5 6 100 7 8 2010
1 1.0M 2
MCLK P1 P1 MCLK I/O O VCLKO K16 K16 1 15p-C I/O UD5 A14 A14 MD13 I/O DISP16 P16 P16 GG6
*XP02
RP07
1005
7 8 2010
SCLK R1 R1 SCLK I/O O LFT J2 J2 1005 27.000MHz 1005 I/O UD4 B13 B13 MD12 I/O DISP15 F16 F16
P2 K17 SMD-49 A13 1 2 F17 1 2
LRCLK P2 LRCLK I/O O LFTV K17 I/O UD3 A13 MD11 I/O DISP14 F17 GB6
R2 J3 2 1 2 CP04 A12 3 4*RP36 G15 3 4*RP48
CHPADI R2 ADI I/O O RREF J3 I/O UD2 A12 MD10 I/O DISP13 G15 GB5
1 T2 *RP08 *RP09 *RP10 15p-C B11 5 6 100 G16 5 6 220
ADO T2 ADO I/O I/O UD1 B11 MD9 I/O DISP12 G16 GB4
*RP18 0 2 1005 118K-1%21 21100-1%2 1005 A11 7 8 2010 G17 7 8 2010
1 I/O UD0 A11 MD8 I/O DISP11 G17 GB3
1005 6.8k-1% 1005 GND1
I MRESET P4 P4 I/O DISP10 H15 H15
1 2 CHPNTR 1005
1 2 1 2
1 D4 D4 NTRST I I WKP D6 D6 I/O LD7 C10 C10 MD7 I/O DISP9 H16 H16
*RP13 7 8 CHPTCK *RP71 3 4
*RP37 1 2
1 E4 E4 TCK I I TEST D5 D5 I/O LD6 C11 C11 MD6 I/O DISP8 H17 H17 GG5
10K 5 6 CHPTMS 0 5 6 100 3 4*RP49
1 F4 F4 TMS I 1005 I/O LD5 B12 B12 MD5 I/O DISP7 D16 D16 GG4
2010 3 4 CHPTDI F3 1
CHPWKP C12 7 8 2010 D17 5 6 220
1 F3 TDI I I/O LD4 C12 MD4 I/O DISP6 D17 GG3
1 2 CHPTDO E3 C13 1 2 E14 7 8 2010
1 E3 TDO O I/O LD3 C13 MD3 I/O DISP5 E14 GG2
RP14 C14 3 4*RP38 E15
I/O LD2 C14 MD2 I/O DISP4 E15
0 5 6 100 1 2
I/O LD1 A16 A16 MD1 I/O DISP3 E16 E16 GR6
1005
RP15 B15 7 8 2010 E17 3 4*RP50
I/O LD0 B15 MD0 I/O DISP2 E17 GR5
1 0 2 5 6 220
RESETN I/O DISP1 F14 F14
4
GR4
1005 RP16
1 0 2
GND1
I/O DISP0 F15 F15 7 8 2010
GR3
4
2 1005 1560-1%2
RESETBM
1 0 2 *RP11
1005
1005
SN74LVC1G08DCK L16 1
O DACP1 L16 CHPAP1
RP12
M17 1
0.01/16 1
*CP05
2
CP08
1
1005
1005
1 100 2
3 GND Y 4
0.01/16
2
CP07
1005
1005
1
*CP11
1 2
0.1/10
1005 1CP122
0.1/10 GND1
1005
GND1
RESETBMF
*IP01 *IP01
FLASH CARD MD2408A POWER AND GND MD2408A
3 3
*RP81 *RP82
7 8 1 0 2 1 0 2
CHPFAA T7 T7 FAA10 I/O I/O FDB3 E1 E1 +3.3V D9 D9 VDDP5 I I VDDC5 D10 D10 +1.8VCPU
1 T6 D1 5 6*RP67 B17 H14
0.01/16
0.01/16
CHPFA9 T6 FAA9 I/O I/O FDB2 D1 B17 VDDP4 I I VDDC4 H14
0.1/10
1.0/10
1.0/10
*CP81
*CP85
*CP86
2
1CP832
1CP882
1
1
4 10K
1005
1005
1005
1 T5 C1 3 120mA U16 P8 240mA
CHPFA8 T5 FAA8 I/O I/O FDB1 C1 U16 VDDP3 I I VDDC3 P8
10/6.3
2
CP98
2125
1 T4 B1 1 2 2010 P9 G3
2
CHPFA7 T4 FAA7 I/O I/O FDB0 B1 P9 VDDP2 I I VDDC2 G3
1 T3 1 2 T1
0.01/16
0.01/16
1
CHPPA6 T3 FAA6 I/O T1 VDDP1 I
10/6.3
*CP84
2
1CP822
2
CP80
2125
1005
1005
1 U7 D3 3 4*RP68 D7
CHPFA5 U7 FAA5 I/O I/O FCB5 D3 I GNDC5 D7
1 U6 C3 7 8 10K A2 G14
0.01/16
0.01/16
1
1
CHPFA4 U6 FAA4 I/O I/O FCB4 C3 A2 VDDP0 I I GNDC4 G14
*CP87
2
1CP892
1005
1005
1 U5 E2 5 6 2010 D8 P11
CHPFA3 U5 FAA3 I/O I/O FCB3 E2 D8 GNDP5 I I GNDC3 P11
1 U4 D2 A17 M4
1
CHPFA2 U4 FAA2 I/O I/O FCB2 D2 CHPFB2 A17 GNDP4 I I GNDC2 M4
1 U3 C2 1 U17
CHPFA1 U3 FAA1 I/O I/O FCB1 C2 CHPFB1 U17 GNDP3 I
1 U2 B2 1 P10 *RP83
CHPFA0 U2 FAA0 I/O I/O FCB0 B2 CHPFB0 P10 GNDP2 I
1 1 1 0 2
DENP U1 U1 GNDP1 I I VDDC1 J14 J14
7 8 *CP90
1 2
T15 T15 FDA15 I/O A1 A1 GNDP0 I
5 6*RP61 T14 0.1/10
T14 FDA14 I/O I GNDC1 J15 J15
3 4 10K T13 1005 1CP912
T13 FDA13 I/O
1 2 2010 T12 10/6.3 *RP84
T12 FDA12 I/O
7 8 2125 1 0 2
T11 T11 FDA11 I/O I VDDC0 K4 K4
5 6*RP62 *CP92
1 2
T10 T10 FDA10 I/O
3 4 10K T9 0.1/10
T9 FDA9 I/O I GNDC0 K3 K3
1 2 2010 T8 1005 1CP932
T8 FDA8 I/O
7 8 U15 10/6.3 *RP85
U15 FDA7 I/O
5 6*RP63 2125 1 0 2
U14 U14 FDA6 I/O I AVDD2 H1 H1
3 4 10K *CP94
1 2
U13 U13 FDA5 I/O
1 2 2010 U12 0.1/10
U12 FDA4 I/O I AGND2 J4 J4
7 8 U11 1005 1CP952
2 2
U11 FDA3 I/O
5 6*RP64 U10 10/6.3
U10 FDA2 I/O
3 4 10K U9 2125
U9 FDA1 I/O I AVDD1 G1 G1
1 2 2010 *CP96
1 2
U8 U8 FDA0 I/O
USBPWR I AGND1 H2 H2 0.1/10
1005
MUTEP CHPFCG P13 P13 FCA16 I/O
7 8 1
P12 P12 FCA15 I/O
1 2*RP65 P7 P7 FCA14 I/O I AVDD0 L14 L14
3 4 10K *CP97
1 2
P6 P6 FCA13 I/O
5 6 2010 P5 0.1/10
P5 FCA12 I/O I AGND0 L15 L15
7 8 R14 1005
R14 FCA11 I/O
5 6*RP66 R13 R13 FCA10 I/O
3 4 10K R12 R12 FCA9 I/O
1 2 2010 R11 R11 FCA8 I/O
CHPFC7 R10 R10 FCA7 I/O
1 R9
CHPFC6 R9 FCA6 I/O
1 R8
CHPFC5 R8 FCA5 I/O
1 R7
CHPFC4 R7 FCA4 I/O
1 2 1 R6
MOE R6 FCA3 I/O
*RP69 CHPFC2 R5 R5 FCA2 I/O
0 1 GND1
CHPFC1 R4 R4 FCA1 I/O
1005 1
CHPFC0 R3 R3 FCA0 I/O
1
1 1
3
4
2
MD9
MD8
MD7
MD6
MD5
MD4
MD3
MD2
MD1
MD0
1
MD15
MD14
MD13
MD12
MD11
MD10
+3.3V
USBAM
USBAP
USBP1
USBP0
+6.6V
G3 G2 G1
USBPWR
G3 G2 G1
USBCANT
RESETBMF
APUAG
4
3
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
A
4
3
2
1
*EPF1
UBA-4R-D10T-1
4
3
2
1
1
1
1
1
1
2125
*RPC4
MD9
MD8
MD7
MD6
MD5
MD4
MD3
MD2
MD1
MD0
MD15
MD14
MD13
MD12
MD11
MD10
APUAV
1 0 2
*RPA1
APUAM
0 2
APUAP
1005
RPC3
*RPC2
0 2
1
1 1.0K 2
2
1 3
*HPF1
1005
SC200JT
2125
2125
*IPC1
0 2
MA9
MA8
MA7
MA6
MA5
MA4
MA3
MA2
MA1
MA0
TK73650TCB-G
MA16
MA15
MA14
MA13
MA12
MA11
MA10
JUMPER R
2
4 3
1 3
4 Vin On/Off 3
*RPF7Poly SW
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2 1
*HPF2
*CPC4
SC200JT
2125
DPF1 1.0/10
5V
2
GND
GND1
GND1
1005
1 2 *RPC1
*RPF5
SDS142WAF
1 1.5K 2
3 5 1 1470-1%2
2 5 Vout PCL
2 2 1 1 1005
MA9
MA8
MA7
MA6
MA5
MA4
MA3
MA2
MA1
MA0
MA16
MA15
MA14
MA13
MA12
MA11
MA10
*CPC1
3 1.0/10
SDS142WKF CPC2
1 1 2
DPF2 10/6.3
2125
*RPF1
CPC3
1005 1
2 1
1
100/6.3
MOE
CKE
CAS
RAS
NWE
1005
MA18
MA17
MA16
MA15
PFCS
DGML
DGMU
SDCS
1 22 2 *RPF2
MVK/SKV
SDCLK
22 2
1005
RPF6
0 2
*RPF3
1 15K 2 RPC6 RPC5
*RPF4 1005 1 100K 2 1 100K 2
1 15K 2
B
1005 1005
MOE
CKE
CAS
RAS
NWE
MA18
MA17
MA16
MA15
PFCS
DGML
DGMU
SDCLK
SDCS
1005
2CPC51
1.0/10
NPA1
*IPA1
S29AL008D70TFI010
MA15 MA16
1 A15 A16 48
MA14
2 A14 BYTE# 47
MA13
3 A13 Vss-46 46
MA12 MD15
4 A12 DQ15/A-1 45
MA11 MD7
5 A11 DQ7 44
MA10 MD14
6 A10 DQ14 43
MA9 MD6
7 A9 DQ6 42
C
MA8 MD13
8 A8 DQ13 41
MD5
9 NC-9 DQ5 40
MD12
10 NC-10 DQ12 39
1
NWE MD4
11 WE# DQ4 38
RPA3
*CPA1
0 2
1 2
12 RESET# Vcc 37
*RPA4 0.1/10
1 4.7K 2 1005 MD11
13 NC-13 DQ11 36
1005
MD3
14 NC-14 DQ3 35
*RPA2
1 4.7K 2 MD10
15 RY/BY# DQ10 34
1005
MA18 MD2
16 A18 DQ2 33
MA17 MD9
17 A17 DQ9 32
MA7 MD1
18 A7 DQ1 31
MA6 MD8
19 A6 DQ8 30
MA5 MD0
20 A5 DQ0 29
MA4 MOE
21 A4 OE# 28
D
MA3
22 A3 Vss-27 27
MA2 PFCS
23 A2 CE# 26
MA1 MA0
24 A 1 A 0 25
G1 G2 G3 G4
ADO
SCLK
MCLK
DENP
LRCLK
MUTEP
A_GND
+5VAUDIO
1
1
1
1
1
1
1
E
*IPA2
CPA2
1 2 EDS1216AATA-75-E
0.1/10 1 VDD1 VSS3 54
1005
MD0 MD15
CPA3 2 DQ0 DQ15 53
1 2
0.1/10 3 VDDQ1 VSSQ4 52
1005
MD1 MD14
4 DQ1 DQ14 51
MD2 MD13
5 DQ2 DQ13 50 *CPA8
1 2
1005
RPG7
*IPG1 1005
PCM1754DBQ *RPG8 MD3 MD12
7 DQ3 DQ12 48
1 2 1 33 2
1 BCK SCK 16
3 4*RPG1 *RPG6 MD4 MD11
1005 8 DQ4 DQ11 47
5 6 33 1 0 2 *CPA4
1 2
2 DATA FMT 15
7 8 2010 1005 *RPG9 1.0/10 9 VDDQ2 VSSQ3 46
1 33 2
3 LRCK MUTE 14
MD5 MD10
1005 RPG5 10 DQ5 DQ10 45
1 33 2
4 DGND DEMP 13
MD6 MD9
1
*RPH1 1005
*CPG1 11 DQ6 DQ9 44
1 0 2 1 2
5 NC TEST 12 *CPA7
GND1
1005
1 2
*RPG4
NWE DGMU
16 /WE UDQM 39
CAS SDCLK
17 /CAS CLK 38
1005
1 0 2
RAS CKE
18 /RAS CKE 37
*RPG2 1005
*RPG3
1 0 2
SDCS
19 /CS NC1 36
1
MA13 MA11
2125
2
4.7/16
20 BS0 A11 35
1
MA12 MA9
21 BS1 A9 34
*CPG3 2125
2
*CPG4
4.7/16
MA10 MA8
22 A10 A8 33
1
1
MA0 MA7
23 A0 A7 32
MA1 MA6
24 A1 A6 31
PL_L_IN
PL_R_IN
MA2 MA5
25 A2 A5 30
MA3 MA4
26 A3 A4 29
*CPA6
G
1 2
27 VDD3 VSS1 28
0.1/10
1005
GND1
CONFIDENTIAL
3
4
2
MEMO
CP-X253(M1-20ED)