Professional Documents
Culture Documents
Ø1.30
[Ø33.0]
2.15 2.03
[54.7] [51.6]
LL OR
CA CT 6
T
PIN NNE 4 5
OU
CO 2 3
1
1.18 2.22
[30.0] [56.5]
Ø.125
[Ø3.2] .45
MOUNTING HOLES [11.5]
NOTES:
MOUNTING HOLES ARE DRILLED FOR .75
#6-20 SELF-TAPPING SCREWS WITH [19.0]
1/4" THREAD ENGAGEMENT. UNITS
[torque to 4 in-lbs.]
IN [mm]
.22
[5.5]
Specifications:
1. Wetted Materials: 4. Electrical Connection:
Plastics: PBT,PPO/PA Pin 1: Tach (Blue) Pin 4: - Ground (Black)
Metals: 316 Stainless, Aluminum Pin 2: PWM (White) Pin 5: Digital UART Rx
Elastomers: AEPDM Pin 3: +DC Voltage Input (Red) Pin 6: Digital UART Tx
5. Operating Environment:
2. Pressure Rating: Temperature Range: 5 - 50° C
Continuous Maximum Dead Head Humidity Range: 20 - 80 % RH, non-condensing
Pressure (PSIG): 24 [1.65] 24 [1.65] 24 [1.65] Media: Air or other chemically compatible gas
Vacuum (in-Hg): 19 [0.64] 19 [0.64] 19 [0.64] Recommended Filtration: 40 Micron or Better
[Bar] Fuse or Current Limiting Circuit is Recommended
Typical Performance Curve with Air
5.0 0.50
4.0 0.40
Current (Amp)
Flow (LPM)
3.0 0.30
2.0 0.20
1.0 0.10
0.0 0.00
16 12 8 4 0 4 8 12 16 20
Vacuum (in‐Hg) ‐ ‐ ‐ ‐ Pressure (psi)
Flow Current
The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance,
maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the
information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors.
The above graph denotes typical performance at 800' above sea level, at 20 - 25°C, and at the specified performance curve conditions. Standard Configuration
Sheet 1 of 1 SPS-B1C-050F12AN-03 Rev -