Professional Documents
Culture Documents
?FEATURES
@Large surge capability (the surge current ratings of TNR V series, by 8/20 M Sec., are about
two times larger than TNR G series).
@Large energy capability (1.5 time larger than TNR G series).
@One rank smaller TNR V has same peak current as TNR G.
@Excellent voltage non-liniar coefficient.
Low clamping voltage.
@Symmetrical V-I characteristics (No polarity).
@Fast response.
@Stable characteristics against repeated surges.
@Superior temperature characteristics.
@High reliability
@UL recognized
UL 1449 : File E95427
UL 1414 : File E65426
@CSA recognized
CSA CLASS 2221 01 : File LR 97864-2
@VDE recognized
CECC42000/CECC42200/CECC42201
License No. : 118623 ÜG (Japan), 40006627 (Indonesia)
?APPLICATIONS
@Protection for semiconductors from over voltage.
@Protection for electronic instruments from lightning surges.
Datasheet.Live
@Absorption of on-off surges from motors and relays.
Operating Temperature Range: -40K+85C
Storage Temperature Range: -50K+125C
T N D C A V - A A A K B AM A A A N
Design Code
Lead Forming / Taping
Packing Style7
Varistor Volt. Tolerance6
Varistor Voltage5
Series4
Element Diameter3
Product Form2
Category1
?DIMENSIONS [mm]
D T
H
W D H T L fd W
L
?V-I CURVE
TNR VOLT-AMPERE CHARACTERISTICS (TND05V-180KKTND05V-680K) at 20C TNR VOLT-AMPERE CHARACTERISTICS (TND05V-820KKTND05V-471K) at 20C
500 2000
400
MAX. LEAKAGE MAX. CLAMPING VOLTAGE 05V-680K 1500 MAX. LEAKAGE MAX. CLAMPING VOLTAGE 05V-471K
300 CURRENT 05V-560K CURRENT 05V-431K
05V-470K 05V-391K
05V-390K 1000 05V-361K
05V-331K
200 05V-330K
05V-270K 800 05V-271K
05V-220K 05V-241K
150 700
05V-180K 05V-221K
05V-201K
600
100 05V-151K
500
80 05V-121K
70 400
60 05V-101K
50 300 05V-820K
40
30 200
VOLTAGE (V)
VOLTAGE (V)
20 150
15
100
10 80
8 70
7 60
6 50
5
4 40
800A
3 -7 250A 30
-6 -5 -4 -3 -2 -1 0 1 2 -7 -6 -5 -4 -3 -2 -1 0 1 2
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
Direct Current (A) 8/20Msec Impulse Current (A) Direct Current (A) 8/20Msec Impulse Current (A)
?DIMENSIONS [mm]
D T
H
W D H T L fd W
L
20
15
10
8
7
6
5
4
500A
3 -6 -5 -4 -3 -2 -1 0 1 2
10 10 10 10 10 10 10 10 10
Direct Current (A) 8/20Msec Impulse Current (A)
400 07V-101K
07V-820K
300
200
VOLTAGE (V)
150
100
80
70
60
50
40
1750A
30 -6 -5 -4 -3 -2 -1 0 1 2 3
10 10 10 10 10 10 10 10 10 10
Direct Current (A) 8/20Msec Impulse Current (A)
?DIMENSIONS [mm]
D T
H
W D H T L fd W
L
20
15
10
8
7
6
5
4
800A
3 -6 -5 -4 -3 -2 -1 0 1 2 3
10 10 10 10 10 10 10 10 10 10
Direct Current (A) 8/20Msec Impulse Current (A)
2000
1500
09V-511K
09V-471K
09V-431K
1000 09V-391K
09V-361K
800 09V-331K
09V-271K
700 09V-241K
600 09V-221K
09V-201K
500 09V-151K
400 09V-121K
09V-101K
300
09V-820K
VOLTAGE (V)
200
150
100
80
70
60
50
40
30 3000A
-6 -5 -4 -3 -2 -1 0 1 2 3
10 10 10 10 10 10 10 10 10 10
Direct Current (A) 8/20Msec Impulse Current (A)
?DIMENSIONS [mm]
D T
H
E
D H T L fd W
W Part Number
Max. Max. Max. Min. p0.05 p1.0
L
Fd
TND10V-150K to TND10V-511K 11.5 14.5
Ref. to 7.5
TND10V-561K to TND10V-112K 12.5 15.5 20.0 0.8
RATINGS
TND10V-122K to TND10V-182K 13.5 16.5 11.0 *
*W2P2.0
2
W
100
80
70
60
50
40
30
VOLTAGE (V)
20
15
10
8
7
6
5
4
1000A
3 -6 -5 -4 -3 -2 -1 0 1 2 3
10 10 10 10 10 10 10 10 10 10
Direct Current (A) 8/20Msec Impulse Current (A)
4000
MAX. LEAKAGE MAX. CLAMPING VOLTAGE
10V-112K
3000 CURRENT 10V-102K
10V-911K
10V-821K
10V-751K
2000 10V-681K
10V-621K
10V-561K
1500 10V-511K
10V-471K
10V-431K
10V-391K
1000 10V-361K
10V-331K
800 10V-271K
700 10V-241K
600 10V-221K
10V-201K
500 10V-151K
10V-121K
400 10V-101K
300 10V-820K
VOLTAGE (V)
200
150
100
80
70
60
50
40
30 3500A
-6 -5 -4 -3 -2 -1 0 1 2 3
10 10 10 10 10 10 10 10 10 10
Direct Current (A) 8/20Msec Impulse Current (A)
?DIMENSIONS [mm]
D T
H
E
D H T L fd W
W Part Number
Max. Max. Max. Min. p0.05 p1.0
L
Fd
TND14V-150K to TND14V-511K 15.5 18.5
Ref. to 7.5
TND14V-561K to TND14V-112K 16.0 19.0 20 0.8
RATINGS
TND14V-122K to TND14V-182K 17.0 20.5 11.0 *
*W2P2.0
2
W
20
15
10
8
7
6
5
4
3 2000A
-6 -5 -4 -3 -2 -1 0 1 2 3
10 10 10 10 10 10 10 10 10 10
Direct Current (A) 8/20Msec Impulse Current (A)
200
150
100
80
70
60
50
40
30 -6 6000A
-5 -4 -3 -2 -1 0 1 2 3
10 10 10 10 10 10 10 10 10 10
Direct Current (A) 8/20Msec Impulse Current (A)
?DIMENSIONS [mm]
D T
H
D H T L fd W
E Part Number
Max. Max. Max. Min. p0.05 p1.0
TND20V-180K to TND20V-511K 21.5 24.5 Ref. to
W TND20V-561K to TND20V-112K 22.5 25.5 Ratings 10.0
L
Fd
TND20V-122K 10.8 20 0.8
TND20V-152K 23.5 28.0 12.8 13.0 *
TND20V-182K 14.8 15.0 *
*W2P2.0
2
W
80
70
60
50
40
30
VOLTAGE (V)
20
15
10
8
7
6
5
4
3 -6 3000A
-5 -4 -3 -2 -1 0 1 2 3
10 10 10 10 10 10 10 10 10 10
Direct Current (A) 8/20Msec Impulse Current (A)
20V-820K
200
150
100
80
70
60
50
40
30 -6 10000A
-5 -4 -3 -2 -1 0 1 2 3 4
10 10 10 10 10 10 10 10 10 10 10
Direct Current (A) 8/20Msec Impulse Current (A)
?GENERAL SPECIFICATIONS
Item Test Conditions Specifications
Standard Test 20P5C, 65P20% RH unless specified.
Condition However, if it does not affect test result,
the condition can be 20P15C, 65P20% RH also.
Varistor Voltage Voltage across varistor at specified current. Satisfy the specification
Type Current C(mA)
5V 0.1
7V, 9V, 10V, 14V, 20V 1.0
Maximum Allowable Maximum continuous AC voltage (50K60Hz AC) and maximum DC voltage which can be Satisfy the specification
Voltage applided.
Maximum Peak Maximum surge current (8/20Msec. pulse wave to be applied once, or twice, 2 minute apart) for Satisfy the specification
Surge Current varistor voltage change within P10% of the initial value.
Energy Rating Maximun energy (2msec. square wave to be appliecd once) for varistor vlotage change within Satisfy the specification
P10% of the initial value.
Rated Wattage Maximum power (50K60Hz AC power to be applied for 1,000 hours at 85P2C) for varistor Satisfy the specification
voltage change within P10% of the initial value.
Maximum Clamping Maximum voltage across varistor when 8/20MSec. rated current surge is applied. Satisfy the specification
Voltage
Capacitance Varistor's capacitance at 1kHz, standard test condition. For reference only.
Voltage Temparature VcmA at 85C – VcmA at 25C 1 Within P0.05%/C
B B100 (%/C)
Coefficient VcmA at 25C 60
VcmA : Actual varistor voltage
Insulation Short circuit the two leads of varistor, and put the varistor body into lead balls (1.6mm The varistor shall withstand
diameter) leaving 2mm epoxy coating outside. Then, apply 2.5kVrms between the leads and with no abnormality.
the lead balls for 60P5 seconds.
?RELIABILITY CHARACTERISTICS
Item Test Conditions Specifications
Heat Cycle Subject varistor to the following tempmrature cycles. -40C for 30 minutes Normal room DVcmA [P5%
temperature for 10 minutes 85C for 30 minutes Normal room temperature for 10 minutes. No appearance abnormality.
This completes one cycle. The cycle shall be repeated 5 times total. After the cycles, the
varistor shall be stored at normal room temperature for one hour. Then check the varistor
voltage and the appearance.
High Temperature Store varistor at 125C for 1,000 hours. After that, store the varistor at normal room DVcmA [P5%
Exposure temperature for one hour. Then check the varistor voltage. However, on varistors have
nominal varistor voltages
from 15V to 68V, the varistor
voltage change shall be
DVcmA [P10%
Humidity Resistivity Store at 40C, 90 to 95% RH for 1,000 hours. After that, store the varistor at normal room DVcmA [P5%
temperature for one hour. Then check the varistor voltage.
High Temperature Apply maximum applied voltage to varistor at 85C for 1,000 hours. After that, store the varistor DVcmA [P10%
Operation at normal room temperature for one hour. Then check the varistor voltage.
?MECHANICAL CHARACTERISTICS
Item Test Conditions Specifications
Soldering Heat Store varistor at normal room temperature. Dip the varistor leads to solder, at 350P10C for 3 DVcmA [P5%
Resistivity P 10 seconds, up to 2.0K2.5 mm from the varistor body. After that, store the varistor at normal Vc : Actual varistor voltage
room temperature for 30 miniutes, and measure the varistor voltage. No mechanical damages
Solderability Dip varistor leads to methanol solutin (JIS K 1501, about 25%) of rosin (JIS Z 5902) for 5K10 At least, 95% of the surface
seconds. Then, dip the lead to solder (JIS Z 3282 H60A or H63A) at 225K240C, up to 2.0K dipped to solder shall be
2.5mm from the varistor body for 5P0.5 seconds. Then, check the solderability. coverd by new solder.
Lead Pull Strength Fix varistor body, and suspend specified weight toward direction of lead axis. No abnormality such as
Type Lead Diameter Weight disconnection.
5V, 7V, 9V 0.6mm 10N
10V, 14V, 20V 0.8mm 10N DVcmA [P5%
Lead Bend Strength Fix varistor body vertically. Then suspend specified weight and bent the varistor body by 90o, The leads shall not
and return it to the original positon. Carry out the operation in the opposite direction and disconnect, slacken and
return the body to the original position. peel off.
Type Lead Diameter Weight
5V, 7V, 9V 0.6mm 5N
10V, 14V, 20V 0.8mm 5N
Vibration Resistivity Mount varistor body on vibrator, and conduct follwing No remarkable appearance
vibration test. abnormality.
Peak-to-Peak amplitude : 1.5mm
Vibration frequency range : 10Hz to 55Hz DVcmA P5%
Sweeping time:
Approximately one minute for 10Hz 55Hz 10Hz
Direction and duration of vibration :
Three directions of X, Y and Z. Two hours each.
Six hours total.
*Coverage of UL1449
In UL1449, the coverage is prescribed according to surge current as follows.
Type Equipment where TNR is used Varistor Rating
Type 3 Cord Connected Direct Plug-In TND10V(621K-182K), TND12V(431K-182K)
Type 2 Permanently Connected TND14V(201K-182K), TND20V(820K-182K)
Others Others TND05V, TND07V, TND09V, TND10V(820K-561K), TND14V(820K-181K)
*Recognized marking
UL, CSA : on the products VDE : on the package label