Professional Documents
Culture Documents
ONIDA
SERVICE MANUAL
COLOUR TELEVISION
14DELITE / 21DELITE
BASIC CHASSIS
ULTIMA
CONTENTS
• INSTRUCTIONS
• ADJUSTMENT MANUAL
• STANDARD CIRCUIT DIAGRAM
instruction manual
20 1
l MAGIC EYE
Automatic brightness and contrast adjustment according
to surrounding room light makes it easy on your eyes.
l STEREO SOUND
250W of crystal clear stereo sound - for Flat Delite 21
120W crystal clear stereo sound - for Delite 14
l BLACK STRETCH
Enhances the black colour tone and adds richness to
picture in your TV
l CALENDAR
200 years calendar
l CHILD TIMER
Prevent your child from watching unwanted channels
2 19
Spotted picture Could there be an interference from Replace the antenna cables with a
any electrical equipment, high co-axial cable, which is less prone to OUTPUT
BALUN (S)
tension wire, automobiles, etc. ? interference. Move antenna away from the
INPUT
source of interference.
VIDEO L/MONO R
Double picture Could the direct signals from a TV Move antenna to a different position, (AUDIO)
REAR AV PANEL
(ghost) broadcast station be affected by height or direction. Replace with an
signals reflected from mountains or antenna having good directivity.
buildings etc.? Fig. 2.1
Snowy picture Is the antenna wire cut or disconnected? Check antenna connection.
Is your antenna turned in the Direct the antenna properly. Place your TV on a flat surface, with atleast half a foot separating it from the nearest wall. Insert
wrong direction ? the ‘mains’ plug into the appropriate source.
Is the antenna damaged? Replace or repair the antenna. As shown above, connect the antenna cable to the socket(s) using a balun transformer attached
Remote control Are the batteries exhausted? Replace the batteries. to the cable end. You can connect a VCR / VCD / LD / DVD player to your TV as shown above.
not operating. Are the batteries placed in proper Reinstall the batteries correctly.
polarity ? Note : • RF cord of video player can also be connected to socket(s).
Is there any obstacle between Remove the obstacle.
• Switch off TV before connecting the antenna input.
remote & sensor ?
• Before connecting any external inputs to your TV, switch off the TV.
Lines or streaks Could there be any interference Move the device away until the
in Picture from a Personal Computer, TV, interference is eliminated, change antenna
Video Recorder, etc. position.
Colour patch Could there be external magnetic Switch off TV by the main power button.
field in the vicinity of your TV, Wait for 30 minutes before switching it
OR Earth’s magnetic field may have an on again. If the patch still appears
effect on your television. consult the service centre.
The company will provide service to the customer after the warranty period at a cost, for 7 years
from the date of discontinuation of the model, subject to the availability of the spare parts.
18 3
E R V S C A M
P Fig. 3.2 Frontal Sketch of the Television
4 17
Note: No keys on the remote except (Power and Volume) will work, when child timer is Selective Auto Tune
activated. By selecting this option, tuning will start from the Program No displayed on your screen.
SWAP TIMER Note: To stop Auto Tuning, press DISP key or MENU key on remote.
To avoid viewing advertisements, press the Swap Timer key to get a screen indicating Timer
Return. Press Swap Timer key to set the time in increments of 30 seconds. Having set the time, Channel Search
you may now move to any other channel. After the time lapses, the picture switches to the Set channel number by pressing 3/4repeatedly at PROGRAM NO. To search desired
channel originally being viewed. channel press3/4key repeatedly at channel search.
Note : To come to the original channel prematurely, simply press the Swap Timer key once. Note: To stop Channel Search, press DISP key or MENU key on remote.
16 5
CHANNEL SCAN
Press the CH. SCAN key to automatically surf all the stored channels in a numerical order. Press
the key again at the channel you want to view; the scanning stops.
TV/AV
Press TV/AV key to switch between television channels and Video mode.
Note: In Video mode, user can access TV channels by pressing NUMERIC Keys. However
CHANNEL +/- keys on the remote control and CHANNEL 5/6keys on TV front panel are
not operational in Video mode.
6 15
14 7
6. PICTURE MENU Press FAV key two times. Store the current programme of your choice in favourite list. Press FAV
key and 3/4key to surf through favourite channel list. Press FAV key three times to cancel
current favourite channel.
Press the Menu Key once to access the Picture Menu (Fig 6.1). Press 6 key. CHANNEL MANAGER (Fig. 9.2)
5
6 CH MANAGER
• When at brightness, you can use the 3/4key to decrease or increase the picture brightness. • Press 6key to select Channel Manager option.
INSERT
• When at contrast, you can use the 3/4 key to decrease or increase the picture contrast. • Press 4keys to get into the sub-menu DELETE
• When at colour, you can use the 3/4 key to decrease or increase the picture colour. SKIP
• When at sharpness, you can use the 3/4 key to decrease or increase the picture sharpness. INSERT
Fig. 9.2
• When at input, you can select the input source between TV / AV By using this option, user can store a particular program on any
channel number the user desires.
Note: • Select the program you want to store on a different channel number.
Tint is displayed in the Picture Menu only when viewing • Press Menu key
BRIGHTNESS
images from an NTSC colour system in Video Mode. This is • Press4three times
useful to change the hue of the picture. CONTRAST
• Press 6 till you come on Channel Manager option
COLOUR
• Press4, enter the channel number (using numeric keys) where you want to store the program
SHARPNESS
• Press3/4, the program will be inserted at the selected Channel number.
TINT
• When at colour system, you can change picture colour
INPUT TV / AV
system PAL & Auto colour system in T V mode. DELETE
COL - SYS PAL
• Auto, PAL, NTSC3 58, NTSC 4.43 in video mode. • Press4while at CH MANAGER
Fig. 6.1 • Press 6once to select DELETE
• Press3/4to delete the program
The particular program is deleted from the channel number, and all programs after that
channel number are shifted up by one channel number.
SKIP
By using this option, user can SKIP a channel no.
• While at CH MANAGER Press4
• Press 6to come at SKIP option
• Press3/4, user will be asked for a password. Enter the password
• Skip will be turned ON.
Next time when the user surfs the channels, the channel will be skipped.
8 13
BLACK STRETCH
While at this option Press 3/4key to set it to ON.
This enhances the contrast and picture details of the TV.
12 9
ON POS
This option helps you set channel at which you want your TV to switch ON at the set time [ON
Press the ‘MENU KEY’. Press4key twice to arrive at CHANNEL SCHEDULER (Fig. 8.1) TIMER]
• Press 6 key to select ON POS option
CLOCK • Press numeric keys to set the channel at which you want your TV to switch ON at set time
This feature helps you set the time of the clock operating in the TV system [ON TIMER]
• After above operation, press 6 key to select ‘CLOCK’ • Press 6 key on ALARM, Alarm can be made on/enabled.
option. CLOCK
OFF TIMER
• By pressing 3/4key, it will help you shift between ALARM
ON TIMER
AM/PM. You have to switch on the ALARM in order for the above timers to be effective
ON POS
• By pressing numeric keys time can be input. ALARM • Press 6 key to select ALARM option
• By pressing DISP key clock will be displayed on the TV CALENDAR • Press4key to switch it ON
screen. By pressing DISP once more, clock will disappear.
Fig. 8.1 Note: ALARM option can be selected only after the ON TIMER / OFF TIMER is set
• If Main Power is switched off, the clock will stop.
Note: It is normal if the clock drifts by a few minutes over a period. It does not mean that the CALENDAR
clock is malfunctioning.
This option helps you access CALENDAR from year 1900-2099 While at Channel Scheduler
option
OFF TIMER (To access this option, CLOCK has to be set) • Press 6 key to select CALENDAR option
This feature helps you to switch off the TV at desired times • Press4key to view CALENDAR
• Press 6key to select OFF TIMER • Press 5/6 key to select month/year
• By pressing 4, AM/PM can be selected. • Press 3/4 key to surf through month/year.
• By pressing numeric keys, off time can be set.
• Half a minute before switching off, a GOOD BYE message with remaining seconds
countdown will appear on your screen.
• By pressing key on ALARM, alarm can be made ON/ENABLE.
ON TIMER
• This feature helps you switch on the TV at desired times of your choice.
• Press 6 key to select ON TIMER
• By pressing 4, AM/PM can be selected
10 11
USER SETTINGS
CHANNEL NO. 1
VSM THEATER
VOL 10
DIG EYE OFF
SKIN TONE NORMAL
STANDBY OFF
MUSIC MODE OFF
SLEEP OFF
COL SYS PAL
ZOOM NORMAL
CHILD SAFE/ TIMER RETURN OFF
SOUND SYS B,G
VOL LOCK OFF
BLUE BACK OFF
AUTO OFF OFF
HOTEL MODE OFF
BLACK STRETCH ON
DNR OFF
PANEL LOCK OFF
MESSAGE OFF
AFT ON
PASSWARD 5963 MASTER PASSWARD
33uH
OPT OPT C016 C018
10uF/50v
100KpF
VH
10K 10uF/50v
C00510uF/50v
470uF/10v
C004
R018
C2084.7uF/50v
OPT OPT
C003
C227
R002 BW
+
+
+
R022 C010 C203 +5V
L201
C708 1uF
1 VL
1
C204
X
4K7 C008 OPT OPT BW 6.8K
+
+
+
22 Vcc Vss 21
470uF/16v
C001 330KpF
+
C007
C006
1uF/50v
R003
X201
R004
R008
R001 OPT
C223
C706 470pF 8V
10E
+
R021 R020 OPT OPT
R734
Y001 OPT 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 R726
10KR732
10KR733
CNIN 1K 10KpF 24 HP LEVEL
M37160 X IN 19 470E
Y004 BW R023
10K
+5V
DRIVE GND
X-TAL
BW Q001OPT
INTER
CARRIER OUT
CHROMA FILTER
DRIVE Vcc
ACL/
POWER LED
DDS FILTER
EXT/C IN
VREG Vcc
V/C GND
HiVcc
TV/Y IN
BCL
R019 1
V/C Vcc
8.7V REG OUT
OPT BW
C709
R013 Q006 C233 C711
OPT OPTD608
VL 10E OPT Y003 R230 BW BW R221 1K
BW + 53 EXT AUDIO IN P-ON CONT 28 29 POWER MUTE 14
C219 1N4148
Y002
BW C234 2.2KpF 54 FM DIRECT OUT SCL 27
100pF R220100E 30 SCL F ADJ 13
C710OPT
C218
FM DIRECT OUT
R219
C235 1uF 55 VIF VCO F/B IC201 SDA 26 100pF 31 SDA UHF 12
EXT AUDIO IN + R731
100E 10K
RF AUDIO
56 SIF GND M61264 CLOCK CONT 25 32 CLK CONT VH 11
+
C225
1uF/50v 57 VIF GND FAST BLK 24 33 F BLK VL 10
R225 330E R715
2.2K
2 R226
OPT
C236
OPT
58 VIF VIDEO OUT R IN 23 34 R REMCON 9
REMCON
2
C201 59 RF AGC OUT G IN 22 35 G KEY BOARD 8
KEYBOARD
+
2.2uF/63v C226 X
C236 22pF
680E
R232
2.7KpF/500V C918
VDD DECOUPLING
R903 Y903 100uF/160V 10K TIMER
D902 R902 C909 OPTY905 63 VIF 1 MONITOR OUT 18 39 MONITOR TIMER 4
220K,1/2W 10K C712
OPTOPT +8V +
V RAMP CAP
V RAMP F/B
AFC FILTER
4 13 64 VIF 2 R233
HVCO 17 40 P.BASS PB LEVEL 3
DEF Vcc
AFT O/P
VIF Vcc
SIF Vcc
G OUT
R235 R727
H OUT
R OUT
B OUT
F/B OPT
+
D903
*1
1M L701 1K
C906
6 10mm C922 41 SURROUND VT 2 10K
C907 10 680pF/500v Y203 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 C701 R718
220uF/450v OPT R218 C240 R716 OPT 1K
15 K905 D915 L401 D205 D206 D207 2.2K 10KpF
1N4148 C925 R207
BW D914 L903
+
7.5V
7.5V
7.5V
6.8K 10K
1uH
Y204 5% TIMER
D916
7 RU3YX
+
330E R210
C924 OPT 100uF/16v 10KpF D405
1uF/50v
DEG
I
C904 14 C923 330/16 8.2v OPT R503 180E 180E 180E R722100E R724
470pF/400v 1000uF/16v OPT X SURROUND 330E
R209 10K
C214
1 CE42050-001 MICON 5V
18KpF
PTC2P -7R0Q270 17
Y911 120K
680/500 R212
BW D917 Y202
L01 2
TH901 9 K906 C927 L904
BW OPT 2.2K R214
AV1/AV2
+
C215 R213
C928 R211 470uF/16v 2.2K R OUT
C902 OPT 1000uF/35v 10K H OUT
FBP
LF901 C926 V RAMP F/B
470pF
CEM40293-001 V RAMP
K907 C929 L905 5.7V
8 18
OPT F ADJ
3 2 OPT 1
IC70224C16 MICON 5V GND
D919 C930 2
OPT
OPT MICON 5V
8
3
4 1
D920 Q906 R924 R925 Q907
D910 RGP10J
2SC2236-Y 100E2SC2655 SCL CNFA
1 2 R926 27E,3W R723 R721 4
RGP10J
7
C901 Q905 6.8K 6.8K SDA OPT
APS 15E,1W 5
0.1uF/250V 2SC2236 MICON 5.7V
SCL
8.7V
+
6
VA901 C934 C931 C932 C936 C937
1000uF/16v C933 47uF/50v 100uF/16v 10uF/50v 100uF/16v
VAMAIN SDA
5
+ 100uF/16v C935
Y901 470uF/16v
C914 K901
Y913 BW 10uF/100v
BW D704 D705
OPT S901 OPT OPT
Y914 Y902 R905 B1
R914 R913 68E/3W
OPT
1.5E/5W
4 1 2
C915
2SC2655
D911
Q902
2SA966
Q903
C912 0.27E/3W
D906 0.1uF
1KpF,400v
R918 Y716 4
+
8.2V
33uF/16v
SAMIR MILIND
5/7/2004
S901 D912 FINISH DATE DESIGNED DRAWN CHECKED APPROVED ELECTRONICS
OPT
POWER SW NAME COUPLE MAIN PCB DRG. NUMBER
MATERIAL COUPMONO_1.S01
MODEL
A B C D E F
OPT
GND PWB ASSY *1 SURROUND
2 ASSY SMZ-3001A
TP-478
2 1 3 2 1 1 2 3 4 5 SURROUND
REM ORC122K-152Z SDA
3
R305 TP RK
PB LEVEL IC601 2616 DIG EYE
4 Q301 150V 1.5K 1/2W GK SCL
CNFC
2SC4722(NP)
1 L IN
1 2 3
L OUT
4 5
R OUT
6 7 8
R IN
9 Q701
KEY
+8V
5
6
R308
150
2.7V
R311
C305
330pF
R314
BK
V01
P.BASS
1
S701 S702 S703 S704 S705 C2412 2.7V 270E
4.7K
Q601 AUDIO VCC C702 R713 R712
R710 R708 TIMER
7 CNRGB1
470PF LDR 10K CNRGB2 R303 *1
ORG029J-123A
R6042SC2412K C608 MENU CH- CH+ VOL- VOL+
10K 8V 8V 5 12K 2W OMR
D601 1K C609 R714 BW 5 R306
+
MUTE R603 0.47uF C602 R711
+
0.47uF ORC122K-152Z
+
ORC122K-152Z QCY33DK-103
8.2E 8.2E 470uF/35v R027 D305
L301
Q303 165V R307
R633 *1 SCREEN
82uH
10K 1N4148 15K R028 27K R030 R031
R632 18K 2SC4722(NP) 1.5K, CRT SOCKET
.010 2KV 470K 1/2W
1/2S QRC 122K-474Z
10K C606 C605 5.6K 5.6K R3173.3K 1/2W
R634 R613 22KpF 22KpF R310 C307
+
+
AUDIO GND 2.5V
10K OUT VCC GND 150E R321
R607
C013 C014 R032 2.7V 330PF C309 OPT 5K6
Q603
+
SDA R707 C310 100E R319
R605 *2
+ 2SC1037AK 470/16
+
+
1N4148 C1037 R608 IC602 REM C703 R026 Q008 3.3K C312 R320 C311 1.5K
C635 2K2 R606 SCL 5.6K 2SC2412K C308 270 180 10/50
1KTDA7449D 100 47/25 100/25 R313 0.1MLY Q304
470uF/16V *2 1K C011 VER 1 4.7K
GND 2SA1037
C614 R620
390PF,5%
20
C017
1
C REF CNHT2
+
OPT 2 1 2 3 4
10uF/16v
SCL BW Y301
C615 R619 VT D701 NOTE:- D302-D304 = 4.7V HB GND HEATER BW
19
2
VS SDA OPT
2 KEY B OUT D305-D307= E1SDIMA111-X 200V
2
+
100uF/16v BW C626 C627
OPT D406 OPT
DIG EYE OPT G OUT
18
3
GND
Y604
Y603
GND
BW
BW
6
5
R1IN L
7
2SC2412K C411
R614 R409 R410 33K 47KpF
RF AUDIO OUT R609 C621 R616
C416
BW R615 OPT
2200uF/35v
1K R411 R406
8
L1IN R
OPT
D602 330Kpf 2.2K R408
+
R OUT
OPT OPT 330E 7
12
R407
9
11
560E LOUT AV
W66 2.7E
OPT
+
H-PULSE ROUT
C618 4 FOCUS
C619
+
BW R415
12V BW 2.7E
+
3 3
GND
V2 IN
ACL R510
OPT R519 1.8 1W D402 Y5041 3
+
4 C633 R515 D504 BW C414 RGP10J BW
Y607 *1 FOR 14" MODELS 2.2K 1SS133-T2 C501
BW 1000/35 1KpF,200v
R202 C206 Q502 ST1803DFH 2
BW BW OPT SK301 E1SSCM14002-S01 R501
J001
+
+
R201 OPT R302 E1SRG029J-103A 4.7uF/63v ME40203-00B MPP D501
16
DEF.YOKE
1
R622 D604 0V
2
L1 C907 120uF/450V
L1 IN R621 BW C628 OPT L SW OUT
Y909 R919
Y501 DELETE
OPT +8V C616 V OUT + V SW OUT Y502, Y505 BW 2 4
K501 BW BW
14
10uF/50v
3
J002 R2
DRIVER BW R512 47K OV
BW HOR
+
C632
+
D502 Y501 BW 4
5
+5V R1 V1 2SC1627A(OY)
+
OPT
6
R1 IN
R1-O
V1-O
GND
GND
L1-O
GND
L1-I
MIRC
GROUP
A B C D E F