Professional Documents
Culture Documents
Typical Properties
Specification Writers: These values are not intended for use in preparing specifications.
How To Use VORASURF SH 193 Fluid is recommended for producing rigid PU foam. A use level of 1.5
parts VORASURF SH 193 Fluid per 100 parts polyol is suggested. The optimum surfactant
loading should be defined for the particular foam formulation.
Handling VORASURF SH 193 Fluid has a relatively high freezing point, so in winter season, a part of
Precautions VORASURF SH 193 Fluid may freeze, and as a result, may lack uniformity. If
VORASURF SH 193 Fluid lacks uniformity due to such freezing and is used in foaming,
performance may be not enough to achieve foam properties.
If VORASURF SH 193 Fluid is separated or hazy liquid, you should mildly heat
VORASURF SH 193 Fluid in hot room at about 50 degrees and make it clear liquid.
Limitations This product is neither tested nor represented as suitable for medical or pharmaceutical
uses.
Health And To support customers in their product safety needs, Dow has an extensive Product
Environmental Stewardship organization and a team of product safety and regulatory compliance specialists
available in each area.
Information
For further information, please see our website, www.consumer.dow.com or consult your
local Dow representative.
Dow’s sole warranty is that our products will meet the sales specifications in effect at the time of shipment.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown
to be other than as warranted.
TO THE FULLEST EXTENT PERMITTED BY APPLICABLE LAW, DOW SPECIFICALLY DISCLAIMS ANY OTHER
EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.