Introduction VLT® AutomationDrive FC 360 Quick Guide
3.2 Product Overview
A frequency converter is an electronic motor controller 3.3 Additional Resources that converts AC mains input into a variable AC waveform Other resources are available to understand advanced output. The frequency and voltage of the output are frequency converter functions and programming. regulated to control the motor speed or torque. The frequency converter can vary the speed of the motor in response to system feedback, such as changing • The Programming Guide provides greater detail 3 3 on working with parameters. temperature or pressure for controlling fan, compressor, or pump motors. The frequency converter can also regulate • The Design Guide is intended to provide detailed the motor by responding to remote commands from capabilities and functionality to design motor external controllers. control systems.
• Optional equipment is available that may change
In addition, the frequency converter monitors the system some of the procedures described. Be sure to see and motor status, issues warnings or alarms for fault the instructions supplied with those options for conditions, starts and stops the motor, optimizes energy specific requirements. efficiency, and offers many more control, monitoring, and Contact the local Danfoss supplier or go to efficiency functions. Operation and monitoring functions www.danfoss.com/fc360 for downloads. are available as status indications to an outside control system or serial communication network.
3.4 Frame Sizes and Power Ratings
Frame size J1 J2 J3 J4 J5 J6 J7 380-480 V Power size 0.37-2.2 3.0-5.5 7.5 11-15 18.5-22 30-45 55-75 [kW] Dimensions B C 130BC449.10 b [mm] A a