Professional Documents
Culture Documents
www.swagelok.com
Inte gral-Bonnet
Ne edle Valve s
20 / 26 SERIES
O / 1 / 18 /
NEEDLE
O, 1, 18, 20, a nd 26 Se r ie s
■ Live-loaded packing system
■ Compact design
Features
Stem Designs Live-Loaded Packing System
■ Vee—all series Low Emissions certification per API 624 available
■ Soft-seat—all series
Packing nut
■ Regulating—O, 1, and 18 series enables easy
Orifice Sizes external 2-piece chevron packing
■ From 0.080 to 0.375 in.
adjustments with disc springs
(2.0 to 9.5 mm) ■ improves seal
■ reduces friction wear
Flow Coefficients (Cv) ■ compensates for wear
■ From 0.09 to 1.80 Fully supported ■ reduces operating
packing torque
Flow Patterns
reduces need
■ Straight, angle, and cross patterns for adjustment
Panel Mounting
■ O, 1, and 18 series
Vee stem
Vee stem shown; shown; soft-
regulating stem and seat stem
soft-seat stem with with PCTFE
PCTFE tip available tip available
Soft-seat
stem with
PCTFE tip
20 / 26 SERIES
O / 1 / 18 /
NEEDLE
Pressure-Temperature Ratings
Ratings are limited to:
■ 200°F (93°C) max with soft-seat stem with PCTFE stem tip.
■ 250°F (121°C) max with UHMWPE packing.
■ 450°F (232°C) max with PFA packing.
■ 600°F (315°C) max with PEEK packing.
To order a valve with soft-seat stem and PCTFE stem tip, see Ordering Information and Dimensions, page 4 and 6.
To order a valve with UHMWPE or PEEK packing, see Options and Accessories, page 7.
Materials of Construction
Valve Body Materials
1a Material Grade/ASTM Specification
Component Series 316 SS Brass Steel Alloy 400
1a Bar handle Anodized aluminum 2024/B221 or A209
1b Handle pin 18 Steel/A108
Set screw Nickel cadmium-plated steel
1b Round handle O Phenolic with brass insert
Set screw and 1 Nickel cadmium-plated steel
Anodized aluminum
1c Knob handle
1c 7129/B221
20K —
Nickel cadmium-
Set screw
plated steel
1d Bar handle 316 SS/A276
1d 20V
Handle pin, —
and 26 S17400/A564
set screw
Brass 360/ 12L14/ Alloy 400/
2 Packing nut All 316 SS/A276
B16 A108 B164
2
O, 1,➀
3 Gland 304 SS/A240, A167
9a 9b 9c and 20
3 4 Packing springs All➁ S17700/A693
20 / 26 SERIES
O / 1 / 18 /
Cadmium-
NEEDLE
O, 1, Brass 377/ plated Alloy 400/
11a Body 316 SS/A182
and 18 B283 11L17/ B564
A108
20 and
11b Body 316 SS/A479 —
11b 26
Lubricant All Tungsten disulfide- and fluorocarbon-based
Wetted components listed in italics.
Valve series listed with standard handles. For handle options, see Handles, page 8.
➀ 1 series valves with orifice of 0.172 in. (4.4 mm).
➁ O, 20 and 1 series with orifice of 0.172 (4.4 mm)—2 springs;
18, 26, and 1 series with orifice of 0.250 (6.4 mm)—3 springs.
➂ Regulating and vee stem tip and threads; soft-seat stem threads.
D
0.080 in. 0.080 in.
(2.0 mm) (2.0 mm)
E
B1
A
Number of Turns Open
D
B2 H
18 Series Angle open
pattern
Vee and Soft-Seat Stem Regulating Stem G
panel
B1 hole
C
Orifice
0.375 in.
Flow Coefficient (Cv)
(9.5 mm) F
E
Panel
Orifice mount
0.375 in. thickness
(9.5 mm) 1/8 to 1/4
(3.2 to 6.4)
NEEDLE
Orifice
0.250 in. Examples: SS-OVS2
(6.4 mm) SS-OKS2
20 / 26 SERIES
O / 1 / 18 /
NEEDLE
1.62 1.19 0.44
1/8 in. SS-1RM2 0.81
(20.6)
0.172 (41.1) (30.2) (11.2) 0.38 1.38 0.53 2.50
0.37
Male (4.4) 1.97 1.36 (9.7) (35.1) (13.5) (63.5)
1/4 in. SS-1RM4 0.98 (24.9)
NPT (50.0) (34.5)
0.250 2.25 1.62 0.55 0.50 1.88 0.78 2.97
3/8 in. 0.73 SS-1RM6 1.12
(28.4)
(6.4) (62.5) (41.1) (14.0) (12.7) (47.8) (19.8) (75.4)
0.375 3.00 2.25 3.00 1.03 3.88
1/2 in. 1.80 SS-18RM8 1.50
(38.1) 0.75
(19.1)
(9.5) (76.2) (57.2) (76.2) (26.2) (98.6)
0.080 1.73 0.98 0.75 1.29 0.31 1.00 0.47 2.28
1/8 in. 0.09 SS-ORM2-S2
(2.0) (43.9) (24.9) (19.1) (32.8) 0.44 (7.9) (25.4) (11.9) (57.9)
0.172 1.95 1.13 0.98 1.51 (11.2) 0.38 1.38 0.53 2.50
1/4 in. 0.37 SS-1RM4-S4
(4.4) (49.5) (28.7) (24.9) (38.4) (9.7) (35.1) (13.5) (63.5)
Male NPT/
Swagelok 1/4/
SS-1RM4-S6 2.42 1.29 1.79
tube fitting 3/8 in.
0.250 (61.5) (32.8) 1.12 (45.5) 0.55 0.50 1.88 0.78 2.97
3/8 in. 0.73 SS-1RM6-S6
(6.4) (28.4) (14.0) (12.7) (47.8) (19.8) (75.4)
3/8/ 2.52 1.40 1.90
SS-1RM6-S8
1/2 in. (64.0) (35.6) (48.3)
0.250 2.19 1.06 1.12 1.56 0.55 0.50 1.88 0.78 2.97
1/4 in. 0.73 SS-1RM4-F4
Male/ (6.4) (55.6) (26.9) (28.4) (39.6) (14.0) (12.7) (47.8) (19.8) (75.4)
female NPT 0.375 3.00 2.25 3.00 1.03 3.88
1/2 in. 1.80 SS-18RM8-F8 1.50
(38.1) 0.75
(19.1)
(9.5) (76.2) (57.2) (76.2) (26.2) (98.6)
0.250 2.12 1.56 0.55 0.50 1.88 0.78 2.97
1/4 in. 0.73 SS-1RF4RT 1.06
(26.9)
(6.4) (53.8) (39.6) (14.0) (12.7) (47.8) (19.8) (75.4)
Female
ISO➀ 3/8 in. 0.375 SS-18RF6RT 3.00 2.25 3.00 1.03 3.88
1.80 1.50
(38.1) 0.75
(19.1)
1/2 in. (9.5) SS-18RF8RT (76.2) (57.2) (76.2) (26.2) (98.6)
Dimensions determined using valves with regulating stems and standard handles. Dimensions are shown with Swagelok nuts finger-tight.
➀ See specifications ISO 7/1, BS EN 10226-1, DIN-2999, JIS B0203.
6 Needle and Metering Valves
Angle-Pattern Valves E
Angle-pattern bodies are available for
B1 B3
valves with C dimensions listed. To
A
order, add -A to the ordering number.
Example: SS-20KM4-F4-A
B2
C
(83.8) (41.9)
O / 1 / 18 /
NEEDLE
20 / 26 SERIES
O / 1 / 18 /
ordering number. backup ring, lubricant, and instructions.
NEEDLE
■ PTFE/ASTM D1710 backup ring
and silicone-based lubricant for all Examples: SS-ORS2-BC To order, add a kit designator to a kit
O-rings except ethylene propylene, SS-20KF4-B basic ordering number.
which requires a polyethylene/ASTM Example: BC70-9K-O
D4020 backup ring, and molybdenum
disulfide with hydrocarbon-based
lubricant
■ O-ring.
8 Needle and Metering Valves
report, MS-06-13.
O / 1 / 18 /
NEEDLE
Warranty Information Micro-Fit, Nupro, Snoop, Sno-Trik, SWAK, VCO, VCR, Ultra-Torr,
Whitey—TM Swagelok Company
15-7 PH—TM AK Steel Corp.
Swagelok products are backed by The Swagelok Limited AccuTrak, Beacon, Westlock—TM Tyco International Services
Lifetime Warranty. For a copy, visit swagelok.com or contact Aflas—TM Asahi Glass Co., Ltd.
ASCO, El-O-Matic—TM Emerson
your authorized Swagelok representative. AutoCAD—TM Autodesk, Inc.
CSA—TM Canadian Standards Association
Crastin, DuPont, Kalrez, Krytox, Teflon, Viton—TM E.I. duPont
Nemours and Company
DeviceNet—TM ODVA
Dyneon, Elgiloy, TFM—TM Dyneon
Elgiloy—TM Elgiloy Specialty Metals
Safe Product Selection FM —TM FM Global
Grafoil—TM GrafTech International Holdings, Inc.
When selecting a product, the total system design must Honeywell, MICRO SWITCH—TM Honeywell
be considered to ensure safe, trouble-free performance. MAC—TM MAC Valves
Microsoft, Windows—TM Microsoft Corp.
Function, material compatibility, adequate ratings, NACE—TM NACE International
proper installation, operation, and maintenance are the PH 15-7 Mo, 17-7 PH—TM AK Steel Corp
picofast—Hans Turck KG
responsibilities of the system designer and user. Pillar—TM Nippon Pillar Packing Company, Ltd.
Raychem—TM Tyco Electronics Corp.
Sandvik, SAF 2507—TM Sandvik AB
Simriz—TM Freudenberg-NOK
SolidWorks—TM SolidWorks Corporation
Caution: Do not mix or interchange parts with those of UL—Underwriters Laboratories Inc.
Xylan—TM Whitford Corporation
other manufacturers. © 2019 Swagelok Company