Professional Documents
Culture Documents
www.swagelok.com
Inte gral-Bonnet
Ne edle Valve s
20 / 26 SERIES
O / 1 / 18 /
NEEDLE
O, 1, 18, 20, a nd 26 Se r ie s
■ Live-loaded packing system
■ Compact design
Features
Stem Designs Live-Loaded Packing System
■ Vee—all series Low Emissions certification per API 624 available
■ Soft-seat—all series
Packing nut
■ Regulating—O, 1, and 18 series enables easy
Orifice Sizes external 2-piece chevron packing
■ From 0.080 to 0.375 in.
adjustments with disc springs
(2.0 to 9.5 mm) ■ improves seal
■ reduces friction wear
Flow Coefficients (Cv) ■ compensates for wear
■ From 0.09 to 1.80 Fully supported ■ reduces operating
packing torque
Flow Patterns
reduces need
■ Straight, angle, and cross patterns for adjustment
Panel Mounting
■ O, 1, and 18 series
Vee stem
Vee stem shown; shown; soft-
regulating stem and seat stem
soft-seat stem with with PCTFE
PCTFE tip available tip available
Soft-seat
stem with
PCTFE tip
20 / 26 SERIES
O / 1 / 18 /
NEEDLE
Pressure-Temperature Ratings
Ratings are limited to:
■ 200°F (93°C) max with soft-seat stem with PCTFE stem tip.
■ 250°F (121°C) max with UHMWPE packing.
■ 450°F (232°C) max with PFA packing.
■ 600°F (315°C) max with PEEK packing.
To order a valve with soft-seat stem and PCTFE stem tip, see Ordering Information and Dimensions, page 4 and 6.
To order a valve with UHMWPE or PEEK packing, see Options and Accessories, page 7.
Materials of Construction
Valve Body Materials
1a Material Grade/ASTM Specification
Component Series 316 SS Brass Steel Alloy 400
1a Bar handle Anodized aluminum 2024/B221 or A209
20 / 26 SERIES
O / 1 / 18 /
NEEDLE
11a 10 Panel nut
O, 1,
316 SS
Brass 360/
316 SS
and 18 B16
Cadmium-
O, 1, Brass 377/ Alloy 400/
11a Body 316 SS/A182 plated
and 18 B283 B564
11L17/A108
D
Orifice Orifice
0.250 in. 0.250 in.
Flow Coefficient (Cv)
(6.4 mm) E
(6.4 mm)
B1
0.172 in. A
(4.4 mm)
0.172 in.
(4.4 mm)
D
B2 H
Angle open
0.080 in. pattern
0.080 in.
(2.0 mm) (2.0 mm) G
panel
B1 hole
C
18 Series Panel
mount
Vee and Soft-Seat Stem Regulating Stem thickness
1/8 to 1/4
(3.2 to 6.4)
NEEDLE
Material Designator
Orifice Valves with Regulating Stems
0.375 in. Alloy 400 M
(9.5 mm) Replace SS in the ordering number
Brass B
with a material designator.
Steel S
Example: M-ORS2
20 / 26 SERIES
O / 1 / 18 /
NEEDLE
1.62 1.19 0.44
1/8 in. SS-1RM2 0.81
(20.6)
0.172 (41.1) (30.2) (11.2) 0.38 1.38 0.53 2.50
0.37
Male (4.4) 1.97 1.36 (9.7) (35.1) (13.5) (63.5)
NPT 1/4 in. SS-1RM4 0.98 (24.9)
(50.0) (34.5)
0.250 2.25 1.62 0.55 0.50 1.88 0.78 2.97
3/8 in. 0.73 SS-1RM6 1.12
(28.4)
(6.4) (57.2) (41.1) (14.0) (12.7) (47.8) (19.8) (75.4)
0.375 3.00 2.25 3.00 1.03 3.88
1/2 in. 1.80 SS-18RM8 1.50
(38.1) 0.75
(19.1)
(9.5) (76.2) (57.2) (76.2) (26.2) (98.6)
0.080 1.73 0.98 0.75 1.29 0.31 1.00 0.47 2.28
1/8 in. 0.09 SS-ORM2-S2
(2.0) (43.9) (24.9) (19.1) (32.8) 0.44 (7.9) (25.4) (11.9) (57.9)
0.172 1.95 1.13 0.98 1.51 (11.2) 0.38 1.38 0.53 2.50
1/4 in. 0.37 SS-1RM4-S4
(4.4) (49.5) (28.7) (24.9) (38.4) (9.7) (35.1) (13.5) (63.5)
Male NPT/
Swagelok 1/4/
SS-1RM4-S6 2.42 1.29 1.79
tube fitting 3/8 in.
0.250 (61.5) (32.8) 1.12 (45.5) 0.55 0.50 1.88 0.78 2.97
3/8 in. 0.73 SS-1RM6-S6
(6.4) (28.4) (14.0) (12.7) (47.8) (19.8) (75.4)
3/8/ 2.52 1.40 1.90
SS-1RM6-S8
1/2 in. (64.0) (35.6) (48.3)
0.250 2.19 1.06 1.12 1.56 0.55 0.50 1.88 0.78 2.97
1/4 in. 0.73 SS-1RM4-F4
Male/ (6.4) (55.6) (26.9) (28.4) (39.6) (14.0) (12.7) (47.8) (19.8) (75.4)
female NPT 0.375 3.00 2.25 3.00 1.03 3.88
1/2 in. 1.80 SS-18RM8-F8 1.50
(38.1) 0.75
(19.1)
(9.5) (76.2) (57.2) (76.2) (26.2) (98.6)
0.250 2.12 1.56 0.55 0.50 1.88 0.78 2.97
1/4 in. 0.73 SS-1RF4RT 1.06
(26.9)
(6.4) (53.8) (39.6) (14.0) (12.7) (47.8) (19.8) (75.4)
Female
ISO➀ 3/8 in. 0.375 SS-18RF6RT 3.00 2.25 3.00 1.03 3.88
1.80 1.50
(38.1) 0.75
(19.1)
1/2 in. (9.5) SS-18RF8RT (76.2) (57.2) (76.2) (26.2) (98.6)
Dimensions determined using valves with regulating stems and standard handles. Dimensions are shown with Swagelok nuts finger-tight.
➀ See specifications ISO 7/1, BS EN 10226-1, DIN-2999, JIS B0203.
6 Needle and Metering Valves
Angle-Pattern Valves E
Angle-pattern bodies are available for
B1 B3
valves with C dimensions listed. To
A
order, add -A to the ordering number.
Example: SS-20KM4-F4-A
B2
C
(83.8) (41.9)
O / 1 / 18 /
NEEDLE
20 / 26 SERIES
O / 1 / 18 /
ordering number. backup ring, lubricant, and instructions.
NEEDLE
■ PTFE/ASTM D1710 backup ring
and silicone-based lubricant for all Examples: SS-ORS2-BC To order, add a kit designator to a kit
O-rings except ethylene propylene, SS-20KF4-B basic ordering number.
which requires a polyethylene/ASTM Example: BC70-9K-O
D4020 backup ring, and molybdenum
disulfide with hydrocarbon-based
lubricant
■ O-ring.
8 Needle and Metering Valves
report, MS-06-13.
O / 1 / 18 /
NEEDLE
• WARNING
Do not mix/interchange Swagelok products or
components not governed by industrial design
standards, including Swagelok tube fitting end
connections, with those of other manufacturers.
MS-01-164, RevO, October 2021
Introduction
Since 1947, Swagelok has designed, developed, and manufactured high-quality,
general-purpose and specialty fluid system products to meet the evolving needs of
global industries. Our focus is on understanding our customers’ needs, finding timely
solutions, and adding value with our products and services.
We are pleased to provide this global edition of the book-bound Swagelok Product
Catalog, which compiles more than 100 separate product catalogs, technical bulletins,
and reference documents into one convenient, easy-to-use volume. Each product
catalog is up to date at the time of printing, with its revision number shown on the last
page of the individual catalog. Subsequent revisions will supersede the printed version
and will be posted on the Swagelok website and in the Swagelok electronic Desktop
Technical Reference (eDTR) tool.
For more information, visit your Swagelok website or contact your authorized
Swagelok sales and service representative.
Warranty Information
Not all trademarks listed below apply to this catalog.
Swagelok products are backed by The Swagelok Limited Life- Swagelok, Cajon, Ferrule-Pak, Goop, Hinging-Colleting,
IGC, Kenmac, Micro-Fit, Nupro, Snoop, Sno-Trik, SWAK, VCO,
time Warranty. For a copy, visit swagelok.com or contact your VCR, Ultra-Torr, Whitey—TM Swagelok Company
authorized Swagelok representative. 15-7 PH—TM AK Steel Corp.
AccuTrak, Beacon, Westlock—TM Tyco International Services
Aflas—TM Asahi Glass Co., Ltd.
ASCO, El-O-Matic—TM Emerson
AutoCAD—TM Autodesk, Inc.
CSA—TM Canadian Standards Association
Safe Product Selection Crastin, DuPont, Kalrez, Krytox, Teflon, Viton—TM E.I. duPont
When selecting a product, the total system design must Nemours and Company
DeviceNet—TM ODVA
be considered to ensure safe, trouble-free performance. Dyneon, Elgiloy, TFM—TM Dyneon
Function, material compatibility, adequate ratings, Elgiloy—TM Elgiloy Specialty Metals
FM —TM FM Global
proper installation, operation, and maintenance are the Grafoil—TM GrafTech International Holdings, Inc.
Honeywell, MICRO SWITCH—TM Honeywell
responsibilities of the system designer and user. MAC—TM MAC Valves
Microsoft, Windows—TM Microsoft Corp.
NACE—TM NACE International
PH 15-7 Mo, 17-7 PH—TM AK Steel Corp
picofast—Hans Turck KG
• WARNING Pillar—TM Nippon Pillar Packing Company, Ltd.
Raychem—TM Tyco Electronics Corp.
Do not mix/interchange Swagelok products or Sandvik, SAF 2507—TM Sandvik AB
components not governed by industrial design Simriz—TM Freudenberg-NOK
SolidWorks—TM SolidWorks Corporation
standards, including Swagelok tube fitting end UL—Underwriters Laboratories Inc.
connections, with those of other manufacturers. Xylan—TM Whitford Corporation
© 2021 Swagelok Company