Professional Documents
Culture Documents
CERTI FICATE
Conformity of the Factory Production Control
2442-CpR- 1090- 1. 0024 1. SVS. 2020. 00 I
ln compliance with Regulation 305/201l/EU of the
European Parliament and of the Council of g March 2011 (the Construction Products
Regulation or CPR), this certificate applies to the following construction product:
lntended use for thin'gauge, cold-formed steel elements and structures for roof,
ceiling, floor and wall applications
CE - marking method Z,A.3.2 and 24,3.4 acc. to EN 1090-1:2009+4L:20L1
produced by or for
Manufacturer Forming AG
lndustriestrasse 26
4313 Möhlln
SWITZERTAND
Manufacturing plant Forming AG
Productlon facillty of the manufacturer
lndustriestrasse 26
4313 Möhlin
SWITZERI-AND
Next
Surveillance audit 21.06.202t
Period of validity This certificate will remain valid as long as the test methods
andlor the factory production control requirements included
in the harmonised standard used to assess the performance of the
declared characteristics do not change, and the product and the
manufacturing conditions in the plant are not modified significantly
Remarks see reverse
Remarks The lrlotified Body - 2442 Schweizerischer Verein für Schweisstechnik has
performed the initial inspection of the/of manufacturing plant(s) and of the
factory production control and performs the continuous surveillance,
assessment and approval ofthe factory production control.
General provlslons
The conditions of the standard EN 1090-L;2009+41;201L, from section B. 4.1 until including section B. 4.4,
must be fulfilled.
The requirements of EN 1.090-1:2009 + A1: 2011, section B. 4.3 are observed. These refer to the annual
statements to be submitted in writing of the manufacturer to the Notified Body.
The General Terms and Conditions of the Schweizerischer Verein für Schweisstechnik apply in the currently
valid version.
Schweizerischer Verein für Schweisstechnik, St, Alban-Rheinweg 222, 4A52 Basel, SWITZERLAND, http:/iwww.svsxass.ch