Professional Documents
Culture Documents
Table of Contents
Step 4: Third, loading .. nokia headset and cord to connect to the four push-on switch, as shown below . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Step 5: Fourth, push-on switch cluster in a box (to taste) like the following picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Step 6: Fifth, re-PX4 raft, do not forget to add a footswitch jack hole in the casing for PX4, and TADAAAAAAAAAA .... So is a foot switch for the Korg Pandora
PX 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Related Instructables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
http://www.instructables.com/id/Footswitch-for-Pandora-PX4it-works/
Intro: Footswitch for Pandora PX4…(it works)
Multi Effects Korg Pandora PX4 , a multi effects pocket, was not designed to be played in the stampede, the difference with his young brother PX 5 that is already
provided for footswitch line ... but with improvised tools and materials, we can make yourself a footswitch for Korg PX4 Pandora .. enough to provide the following tools
and materials.and this is the footswitch for pandora PX4 from Indonesia
http://www.instructables.com/id/Footswitch-for-Pandora-PX4it-works/
Step 2: And step by step go round as follows:
First unloading PX4 like the following picture
Note: be careful in soldering not to damage other components, use solder with a pointed tip, n so sorry forgot to photograph a result of her spirits until solderannya, but
the diagram above is an actual happening
Step 4: Third, loading .. nokia headset and cord to connect to the four push-on switch, as shown below
Note: The order of the cable may be different on each headset, to make sure, use a multi tester to know cable channels to the 3.6 mm jack with 3 bracelets again .. sorry
no actual photos, but the picture above is an actual scheme that occurred.
http://www.instructables.com/id/Footswitch-for-Pandora-PX4it-works/
Step 5: Fourth, push-on switch cluster in a box (to taste) like the following picture
Fourth, push-on switch cluster in a box (to taste) like the following picture
Step 6: Fifth, re-PX4 raft, do not forget to add a footswitch jack hole in the casing for PX4, and TADAAAAAAAAAA ....
So is a foot switch for the Korg Pandora PX 4
And now my Korg PX4 Pandora bias are invited on stage
IMPORTANT: before turning on the PX4, make sure all the jacks are connected
and this is the one and only footswitch for pandora PX4 from indonesia
http://www.instructables.com/id/Footswitch-for-Pandora-PX4it-works/
Related Instructables
How to Your
Repair your Amp Footswitch Custom
footswitches Firmware MOD Install LEDs in
by
How to rip (SPDT, DPDT, Your PSP by footswitch your amp's
Radioactive_Legos
Pandora music 3PDT) by spotnie littlechef37 mouse by footswitch by
(Photos) by odrarek curbowman
edward2011
http://www.instructables.com/id/Footswitch-for-Pandora-PX4it-works/