OPERATION T-FDU-300-100-2D is regulated by the KEY FEATURES
input source. Display units are connected over RS485 • Point-to-point mode for connecting all the to your SCADA system and update the data every 15 display units. Vary as per input protocol. minutes. • RS485 input (customizable). Time is incremented for every 15 minutes through • Display in Seven segment format. RS485 interface which is the fundamental time base for • Character size is 100MM (customizable) each instance of time being incremented. • LED wall display with clear and good readability. The time data is decoded at each instance and shown • Weather-proof construction as 7-segment numbers. • Red colour digits capable of viewing from long TECHNICAL SPECIFICATION distance.
PHYSICAL ASPECTS • Wide viewing angle facilitated by Red transparent
filter overlay. Model : T-SL-300-100-2D 1 Character Size : 100 mm (customizable) Display Type : SEVEN- SEGMENT INPUT CONFIGURATIONS Display Colour : RED 2 Signal source : RS485 Pattern : XX 3 Connector : DB-9 pin Format : NUMBER Voltage : 90-260 V AC/DC Signal Update : Every 15 Min Material : Diecast Aluminium Colour : Black ENVIRONMENT Mounting : Wall/Panel/Table top Ambient Temperature : -10 °C to 55 °C Humidity : 0-90% RH, non-condensing Protection Class : IP55 standard 1 Character size is customizable: 25, 50, 100 mm. 2 Signal source shall be as per requirement. 3 Connector varies according to input source.
SERTEL ELECTRONICS PVT LTD SERTEL ELECTRONICS UK LTD
377, Nehru Nagar, 1st Cross Street, Rutland House, 148 Edmund Street, Old Mahabalipuram Road, Perungudi, Birmingham, B3 2FD, Chennai, Tamilnadu, India 600 096. United Kingdom.