Professional Documents
Culture Documents
P15.V1.140426.M35
Features
4 Button Input
4 DC channel Output
Standard DMX512 output
Function
Button Not Pressed : DMX out max value, channels On
Button 1 Pressed : DMX out min then max value, channels Off/On 1 time
Button 2 Pressed : DMX out min then max value, channels Off/On 2 time
Button 3 Pressed : DMX out min then max value, channels Off/On 3 time
Button 4 Pressed : DMX out min then max value, channels Off/On 4 time
When The elevator arrives to the appropriate floor, the lights connected to this device blink 1, 2, 3 or 4
times depending on which input of the device is connected to the elevator sensor
This device can be produced in different functions/animations according to the customer request.
The customer can not change functions/animations after production.
Specifications
Table 1.Specifications
Parameter Min. Typ. Max. Unit
Operating Voltage[1] 8 24 V DC
Power Consumption 1.5 W
Dimensions (WxHxL) 56x28x95 mm
DMX refresh time 250 mS
Output Current Sink Per Channel [2][3] 5 A
Button Input Voltage 8 24 V DC
Notes: 1. The power supply voltage must be chosen according to operating voltage of LED Luminaire.
2. This device is designed only for DC LED Luminaire, output channels must not be connected to
any electromechanical devices.
www.psl.com.tr 1 R3 07-06-2016
ASANSOR DMX ANİMASYON (33600319)
P15.V1.140426.M35
Pinout
Figure 1.Pinout
www.psl.com.tr 2 R3 07-06-2016
ASANSOR DMX ANİMASYON (33600319)
P15.V1.140426.M35
Schematic Diagram
DC AMP
-L4 6 7 B4
-L3 5 8 B3
MCU
-L2 4 9 B2
-L1
3 10 B1
+V 2 DMX Do+
Do-
Regulator AMP NC
NC
NC
11 NC
DG
1 DG
V+ V-
DMX out
Figure
V+ 2. Schematic Diagram
www.psl.com.tr 3 R3 07-06-2016
ASANSOR DMX ANİMASYON (33600319)
P15.V1.140426.M35
24 V DC
- +
V- 1
11 DMX out
V+ 2
10 B1 ASANSOR -L1 3 V- DC LED Luminaire V+
9 B2 DMX -L2 4 V- DC LED Luminaire V+
8 B3 ANIMASYON -L3 5 V- DC LED Luminaire V+
7 B4 -L4 6 V- DC LED Luminaire V+
www.psl.com.tr 4 R3 07-06-2016
ASANSOR DMX ANİMASYON (33600319)
P15.V1.140426.M35
NOTE: In direct connection, DMX LED line and ASNASOR DMX ANIMASYON must be connected to 1 power
supply
24 V DC
- +
V- 1
11 DMX out
V+ 2
10 B1 ASANSOR -L1 3
9 B2 DMX -L2 4
8 B3 ANIMASYON -L3 5
7 B4 -L4 6
Orange-White
Do+
+24 +24
Data in DMX LED Line (LX BT45/30/… ) Data out
V- V-
www.psl.com.tr 5 R3 07-06-2016
ASANSOR DMX ANİMASYON (33600319)
P15.V1.140426.M35
RJ45 STP and CAT6 STP Ethernet cable according to T568B standard can be used to connect 2 PDMX-DECODER:
www.psl.com.tr 6 R3 07-06-2016