Professional Documents
Culture Documents
Project Guide
Piano Keyboard
Glass Cutting: straight cutting
Firings: contour fuse, slump
3. White Keys: Stack the white strips on the base, making sure to
align the two outside "keys" with the edge of the base, leaving
even, vertical spaces between each one. Adhere with KlyrFire.
4. Black Keys: Set the black stips in the proper positions as shown,
carefully aligning the top edges evenly with the layers below. Use
KlyrFire to hold in place.
5. Contour Fuse.
6. Slump, if desired. (We used Future Forms G3028, centering the
project so that the slumping occurs mostly at the top and bottom,
but not much at the sides.)
Spectrum Glass presents: The System 96® Glass Craft Program