Professional Documents
Culture Documents
: QA/R/15-04
-0.00 -0.00 OK OK OK
Sphere Diameter
1 φ16.00 φ16.00
(Angle)
+0.15 +0.15 NG NG NG
+0.30 +0.30 OK OK OK
Sphere Diameter
2 φ16.00 φ16.00
( Horizontal)
-0.00 -0.00 NG NG NG
0 -0.03 OK OK OK
Sphere base
3 φ12 φ12
diameter
-0.15 -0.12 NG NG NG
OK OK OK
④ Un-Knurled length 1.0_MAX 1.0_MAX
NG NG NG
+0.13 +0.11 OK OK OK
Knurl Outside
5 © Diameter
φ7.75
0
φ7.75
+0.02 NG NG NG
+0.25 +0.25 OK OK OK
7 Recess Diameter φ9.4 φ9.4
-0.15 -0.15 NG NG NG
OK OK OK
8 Recess Depth 4.5 ±0.2 4.5 ±0.15
NG NG NG
OK OK OK
Sphere to shank
9 14.0 ±0.2 14.0 ±0.15
Height
NG NG NG
OK OK OK
10 © Shaft Length 6.3 ±0.2 6.3 ±0.15
NG NG NG
Forging curve OK OK OK
⑪ distance 1.0_MAX
(y-axis) NG NG NG
OK OK OK
12 Sphere height 9.4_MIN 9.4_MIN
NG NG NG
OK OK OK
⑬ Flat area diameter φ10.8_MIN φ10.8_MIN
NG NG NG
OK OK OK
⑭ Undercut Diameter φ9.4_MAX φ9.4_MAX
NG NG NG
OK OK OK
Sphere Center
㉔ 9 ±0.1 9 ±0.1
Position
NG NG NG
OK OK OK
No deformation.crack.short
99 Appearance
dimension.scratch.dent.etc
NG NG NG
Remarks:
Lot / Batch No.: Lot / Batch No.: Lot / Batch No.:
Review:
Sigma Forging & Forming Pvt Ltd., Doc No.: QA/R/15-04
0 -0.009 OK OK OK
1 Sphere Diameter (Angle) Sφ16 Sφ16
-0.045 -0.036 NG NG NG
0 -0.004 OK OK OK
2 © Sphere Diameter
(Horizontal)
Sφ16
-0.022
Sφ16
-0.018 NG NG NG
+0.2 +0.1 OK OK OK
3 Recess Diameter φ9.4 φ9.4
-0.4 -0.3 NG NG NG
OK OK OK
④ © Recess Depth 4.5 ±0.2
NG NG NG
OK OK OK
5 Sphere Height 9.4_MIN
NG NG NG
OK OK OK
7 Sphere to shank Length 14.0 ±0.2
NG NG NG
OK OK OK
8 Sphere center position 9.0 ±0.1
NG NG NG
OK OK OK
9 Unburnishing Area 1.0_MAX
NG NG NG
OK OK OK
10 © Roughness Ra0.4_MAX
NG NG NG
OK OK OK
No deformation.crack.short
99 Appearance
dimension.scratch.dent.etc
NG NG NG
Remarks:
Lot / Batch No.: Lot / Batch No.: Lot / Batch No.:
Review: