Professional Documents
Culture Documents
B2.1 E6 2014 AMD1 Amendment Notice
B2.1 E6 2014 AMD1 Amendment Notice
The following Amendments have been identified and are incorporated in this reprint.
F G G S
E E E C M T L O P S M
B G S A A A B F A A A S
W W W W W W W W W W W W
(2) A change exceeding ±2% in the voltage Q
from that qualified.
(3) A change exceeding ±5% in the beam or Q
beam focus current from that qualified.
(4) A change in the beam pulsing frequency Q
or duration from that qualified.
(5) A change in filament type, size, or shape. Q
(6) A change in the type of power source, Q
or a change in the arc timing exceeding
1/10 second, or a change in amperage
exceeding ±10% from that qualified.
(7) A change in the mode of metal transfer Q
from short circuiting to globular, spray,
or pulsed and vice versa.
The purpose of this amendment notice is to inform the public that a published standard has been technically corrected. An amendment is the correction
of an error in substantive content in a published standard that had been inadvertently approved by the required approval procedures.