Professional Documents
Culture Documents
EW160B
Tradition and innovation in perfect harmony
Specifications EW160B
Engine: Volvo D6D EJE2 Breakout force: 98,5 kN Max. digging depth: 6.3 m
Rated power at: 33 r/s (2000 r/min) 22,144 lb 20'8"
SAE J1995, gross: 110 kW (148 hp) Bucket: 0.19–0.83 m3 Max. travel speed: 35 km/h
ISO9249, SAE J1349, net: 103 kW 0.25~1.09 yd3 21.7 mph
(138 hp) Max. digging reach: 9.7 m Operating weight: 15.8–17.5 t
31'10" 34,960~38,580 lb
2
3
Outstanding performance
The new engine, the advanced hydraulics and the outstanding digging geometry
combine to make the EW180B excavator perfect in a wide range of applications.
It’s a complete excavator, just as good at lifting and traveling as it is at digging.
Excellent off-road mobility and on-road capacity allow you to maintain higher
average speed, fast travel between different work sites.
Engine Auto-idling system reduces noise and High versatility for extra hydraulic
New turbocharged, air-to-air intercooled fuel consumption. equipment.
six-cylinder, low-emission Volvo engine, built
specifically for use in Volvo excavators, Hydraulics Optional boom float position – featured
easily meets EPA Tier 2 requirements. State-of-the-art hydraulic system gives by Volvo since 1968.
you excellent maneuverability with
The electronically-controlled fuel injection minimal power losses. Digging equipment
provides quick response, lower fuel Booms and dipper arms built to with-
consumption and faster work cycles. One-touch power boost for increase stand extreme stress and provide long,
in digging and lifting forces. reliable lifetime.
High engine output gives top class
performance. Durable, aluminium core oil-cooler with Excellent digging and lifting capacities.
an electronically-controlled hydrostatic
Three-step air cleaner increases the fan is located separately from radiator for A wide selection of booms and dipper
engine lifetime and lower operating cost. easy access to clean. arms gives you a solution for every need.
4
5
Complete control
Technical solutions must always be introduced on human terms. It’s the op-
erator who should be in command of the machine, not the opposite. That’s
why our new excavators are equipped with new advanced technology that
always gives the operator complete control. Volvo’s mode selector allows the
operator to select working mode so that the machine adapts to the current
operating techniques and operating conditions. The new MDU – Machine Dis-
play Unit – provides the operator with all relevant information about machine
status in a simple and logical manner.
6
7
More compact on the outside,
more spacious on the inside
Function is a part of every detail in the new machines, which the new
design clearly shows. The EW160B is made compact for easier operation
and more efficient work in urban environments and narrow streets.
Excellent boom lifting height and short tail radius make it possible to
both slew and turn the machine around even in very tight areas. The cab
is slightly more square than before, simply because this makes the cab
more spacious on the inside. There’s lots of room for your feet, as well
as a practical lunchbox compartment and ample space for any personal
items you may want on long shifts.
Cab Superstructure
Ergonomically-designed cab provides Very low cab noise level. Compact tail slew radius and low engine
greater operator comfort for higher hood.
operator efficiency and productivity. Supported by gas springs, the upper
front pane is very easy to slide up. Large side rearview mirror enhancing
Improved visibility for safer and more visibility and safety for both driving and
efficient operation. High-quality comfortable seat with nine working.
different adjustments.
Increased cooling and heating capacity,
with Electronic Climate Control (ECC)
and 13 vents.
8
9
Care – down to the last detail
Volvo wheeled excavators are designed and built using the most ad-
vanced systems and technology available in the world today. Nothing has
been left to chance. But technology has not been allowed to stand above
all. Instead, we’ve focused on operating safety and care – care of the ma-
chine, the environment and, most of all, the operator.
10
11
The EW160B in detail
Engine Undercarriage Hydraulic system
The engine is a low-emission, turbocharged, Drive train: One big variable axial-piston motor on Closed-center load sensing hydraulic system with
4-stroke diesel engine with water cooling, direct the two-step power shift gearbox gives power pressure compensated valves. Load independence
injection and charged air cooler that meets EPA to front and rear axles, both with hub reductions. of movements. Flow sharing feature, combined with
Tier 2 requirements. The engine has been develo- a high flow electronically-controlled pump (power
ped especially for excavator use, providing good Framework: All-welded robust torsion box frame. regulation).
fuel economy, low noise levels and a long service The system gives superior maneuverability and fast
life. Wheels: Alternative single and twin wheels available. movements, for optimal working result and
Air Filter: 3-stage economy.
Automatic Idling System: Reduces engine Front axle: Robust excavator axle with automatic
speed to idle when the levers and pedals are not or operator controlled front axle oscillation lock. The following working modes are included in the
activated, resulting in less fuel consumption and Oscillating ± 9° (with mudguards ± 7°). system:
low cab noise level. Parking mode (P):
Twin wheels ........................10.00–20 PR16 Parking position for optimal safety.
Engine .............................. Volvo D6D EAE2 Maximum tractive force (net)...............95 kN 21,380 lb Travel mode (T):
Rated power at ................................ 33.3 r/s 2,000 r/min Travel speeds
on road .......................................... 35.0 km/h 21.7 mph
Engine speed is controlled by travel pedal stroke
Gross SAE J1995 ......................... 110 kW 148 hp
Net ISO 9249/SAE J1349 .......... 103 kW 138 hp off road ..............................................8.0 km/h 4.9 mph for low fuel consumption and noise. Work
Maximum torque at 1 500 rpm ... 595 N.m 438 lb ft creep speed .....................................3.7 km/h 2.3 mph equipment is not able to move at this mode for
No. of cylinders ...........................................6 Min. turning radius ..................................7.2 m 23'7" ft in optimal safety.
Displacement, total ...............................5.7 l 348 cu.in Working mode (W):
Bore ....................................................98 mm 3.86” Full working flow with adjustable engine rpm for
Stroke .............................................. 126 mm 4.96” Brakes normal working and best speed utilization.
Service brakes: servo-hydraulically maneuvered, Customer mode (C):
self-adjusting wet multidiscs in two separate Operator can set proper oil flow in accordance
Electrical system
brake circuits. with job conditions.
Contronics provides advanced monitoring of
machine function and important diagnostic Power Boost:
Parking brake: negative wet disc in gear housing, All digging and lifting forces are increased.
information. High capacity and well protected
spring applied and pressure released.
electrical system. Centrally located fuse and relay
box using clearly arranged printed circuit board, Hydraulic pumps:
mounted, for easy access behind the cab. A Digging brake: service brake with Main pump
center passage for additional electrical functions mechanical lock system. Type ...................low noise axial piston pump
Maximum flow ................................. 240 l/min 63 gpm
is optionally available. A master switch is standard.
Brake + steering pump
Security system: The 2-circuit travel brakes are
Type ...............................low noise gear pump
Voltage....................................................24 V supplied with two accumulators in the event of Maximum flow ....................................32 l/min 8.5 gpm
Battery ..............................................2 x 12 V failure in the service brake system. Hydraulic oil cooling fan + servo pump
Battery capacity ...............................140 Ah Type .................................................gear pump
Alternator ....................................28 V /80 A Maximum flow ....................................47 l/min 12.4 gpm
Weights Max. pressure
Machine with 5.0 m (16'5") monoblock boom, 2.45 Implements .................................. 32/36 MPa 4,640/5,220 psi
Cab m (8'0") stick, quickfit S6, 530 kg (1,168 lb) / 750 l Travel system ...................................... 36 MPa 5,220 psi
The operator’s cab has easy access via a wide Pilot system ....................................... 3.5 MPa 510 psi
(0.98 yd3) bucket.
door opening. The cab is supported on hydraulic * Machine with 5.1 m (16'9") 2-piece boom.
dampening mounts to reduce shock and vibration Swing system
levels. These along with a sound absorbing lining Total machine weight incl. dozer blade front and outriggers
The superstructure is swung by the means of an
provide low noise levels. The cab has excellent all- rear................................... 17,160 kg ...................(37,831 lb)
.............................................*17,500 kg ................. (38,581 lb*) axial piston motor with a planetary reduction gear.
round visibility. The front windshield can easily slide
Total machine weight including front and rear outriggers
up into the ceiling, and the lower front glass can be
......................................... 17,700 kg ...................(39,022 lb) Automatic swing holding brake and anti-rebound
removed and stored in the door. .........................................*18,300 kg ................. (40,345 lb*) valve are standard.
Integrated air conditioning and heating system: Maximum swing speed ..................9.5 rpm
The pressurized and filtered cab air is supplied Service refill capacities
by an automatically controlled fan. The air is Fuel tank........................................................... 250 l 66 gal
distributed via 13 vents. Hydraulic system, total ................................. 260 l 69 gal
Hydraulic tank ................................................. 135 l 36 gal
Ergonomic operator’s seat: The adjustable seat Engine oil ............................................................25 l 7 gal
Engine coolant...................................................22 l 6 gal
and joystick consoles move independently to
Transmission .....................................................2.9 l 0.8 gal
accommodate the operator. The seat has nine Axle housing
different adjustments and a seat belt to meet any Front axle .......................................................8.5 l 2.2 gal
operator’s comfort and safety. Rear axle ..................................................... 11.0 l 2.9 gal
Final drive
Sound Level: Wet disc type ................................................2.0 l 0.5 gal
Sound level in cab according to Drum type ........................................... 1.1 l 0.3 gal
ISO 6396 ................................. 72 LpA dB(A)
External sound level according to
ISO 6395 .............................. 103 LwA dB(A)
(Directive 2000/14/EC)
12
Specifications
Dimensions
L L A
D
M EW160B
M EW160B C
E
I
F G
B
H
L1
N
860 mm 810 mm
2' 10'' 2' 8''
4,720 mm
M1 15' 6''
EW160B
560 mm 600 mm
1' 10'' 1' 11,6''
300 mm 11,8''
1,095 mm 1,020 mm
1,145 mm 1,100 mm 810 mm 3' 7'' 3' 4'' 105 mm 4,1 2,550 mm 8' 4''
3' 9'' 3' 7'' 2' 8'' 4,390 mm
4,780 mm
15' 8'' 14' 5''
Description Unit 5.0 m (16'5'') Monoblock Boom 5.1 m (16'9'') 2-Piece Boom
13
Working Ranges & Digging Forces
A
B
H
A
H
F F
G
EW160B
C
E DC
Monoblock Boom m, ft-in 5.0 16'5'' 5.0 16'5'' 5.0 16'5'' 5.0 16'5'' 5.0 16'5''
Stick m, ft-in 2.0 6'7'' 2.45 8'0'' 2.6 8'6'' 3.1 10'2'' 3.0* 9'8''
A. Max. digging reach m, ft-in 8.5 27'11'' 9.0 29'6'' 9.1 29'10'' 9.6 31'6'' 8.1 26'7''
B. Max. digging reach at ground level m, ft-in 8.3 27'3'' 8.8 28'10'' 8.9 29'2'' 9.4 30'10'' –
C. Max. digging depth m, ft-in 5.1 16'9'' 5.5 18'1' 5.6 18'4' 6.2 20'4' 4.6 15'1''
D. Max. digging depth (2,440 mm, 8' level) m, ft-in 4.8 15'9'' 5.3 17'5' 5.4 17'9' 6.0 19'8' –
E. Max. vertical wall digging depth m, ft-in 4.3 14'1'' 4.6 15'1' 4.7 15'5' 5.1 16'9' –
F. Max. cutting height m, ft-in 8.8 28'10'' 9.0 29'6'' 9.1 29'10'' 9.4 30'10'' 8.1 26'7''
G. Max. dumping height m, ft-in 6.0 19'8'' 6.2 20'4'' 6.3 20'8'' 6.6 21'8'' –
H. Min. front swing radius m, ft-in 3.1 10'2'' 3.1 10'2'' 3.1 10'2'' 3.1 10'2'' 2.9 9'6''
* Stick for grab
14
Working Ranges & Digging Forces
A
B
H
A
H
F
F
G
EW160B
C
E DC
2-Piece Boom m, ft-in 5.1 16'9'' 5.1 16'9'' 5.1 16'9'' 5.1 16'9'' 5.1 16'9''
Stick m, ft-in 2.0 6'7'' 2.45 8'0'' 2.6 8'6'' 3.1 10'2'' 3.0* 9'8''
A. Max. digging reach m, ft-in 8.7 28'7'' 9.1 29'10'' 9.2 30'2'' 9.7 31'10'' 8.2 26'11''
B. Max. digging reach at ground level m, ft-in 8.4 27'7'' 8.9 29'2'' 9.0 29'6'' 9.5 31'2'' –
C. Max. digging depth m, ft-in 5.2 17'1'' 5.7 18'8'' 5.8 19'0'' 6.3 20'8'' 4.6 15'1''
D. Max. digging depth (2,440 mm, 8' level) m, ft-in 4.9 16'1'' 5.3 17'5'' 5.5 18'1'' 6.0 19'8'' –
E. Max. vertical wall digging depth m, ft-in 4.3 14'1'' 4.8 15'9'' 4.9 16'1'' 5.4 17'9'' –
F. Max. cutting height m, ft-in 9.4 30'10'' 9.7 31'10'' 9.8 32'2'' 10.2 33'6'' 9.0 29'6''
G. Max. dumping height m, ft-in 6.8 22'4'' 7.2 23'7'' 7.3 23'11'' 7.7 25'3'' –
H. Min. front swing radius m, ft-in 2.6 8'6'' 2.8 9'2'' 2.8 9'2'' 2.9 9'6'' 2.7 8'10''
* Stick for grab
15
Lifting Capacity
At the stick end, without bucket. Unit: 1,000 kg
For lifting capacity including bucket, simply subtract actual weight of bucket from the following values.
6.0 m 2.5 3.9* 3.9* 3.9* 2.4 3.0* 3.0* 3.0* 6.2
20' 5,500 7,080 7,080 7,080 5,460 6,790 6,790 6,790 20.08
Monoblock 4.5 m 4.0 4.5* 4.5* 4.5* 2.5 4.1* 4.1 4.1* 1.9 2.9* 2.9* 2.9* 7.0
15' 8,640 9,850 9,850 9,850 5,460 9,060 8,890 9,060 4,300 6,440 6,440 6,440 22.87
boom 3.0 m 3.7 5.7* 5.7* 5.7* 2.4 4.1 3.9 4.6* 1.7 2.9* 2.8 2.9* 7.4
10' 7,990 12,490 12,490 12,490 5,200 8,990 8,600 10,100 3,770 6,500 6,290 6,500 24.30
5.0 m, (16'5'') 1.5 m 3.4 6.2 5.9 7.0* 2.2 4.0 3.8 5.2* 1.6 2.8 2.7 3.1* 7.5
5' 7,340 13,400 12,800 15,180 4,910 8,660 8,280 11,330 3,580 6,330 6,050 6,910 24.63
Stick 0.0 m 5.7* 5.8* 5.8* 5.8* 3.2 6.0 5.7 7.7* 2.1 3.9 3.7 5.6* 1.6 2.9 2.8 3.5* 7.3
0' 12,450 13,400 13,400 13,400 6,970 12,960 12,360 16,680 4,700 8,430 8,050 12,160 3,670 6,540 6,240 7,760 23.88
2.45 m, (8'0'') -1.5 m 6.0* 6.0* 6.0* 6.0* 5.8 10.5* 10.5* 10.5* 3.1 5.9 5.6 7.6* 2.1 3.8 3.7 5.5* 1.8 3.3 3.1 4.3* 6.7
-5' 13,550 13,550 13,550 13,550 12,520 24,200 24,200 24,200 6,870 12,850 12,250 16,630 4,650 8,370 7,990 12,040 4,120 7,360 7,020 9,540 21.96
Front dozer -3.0 m 5.9 9.8* 9.8* 9.8* 3.2 6.0 5.7 6.7* 2.3 4.2 4.1 4.9* 5.7
-10' 12,840 21,270 21,270 21,270 7,030 13,030 12,430 14,590 5,340 9,570 9,140 10,920 18.48
blade
Rear outriggers
6.0 m 2.5 3.8* 3.8* 3.8* 2.3 2.8* 2.8* 2.8* 6.4
20' 5,510 8,030 8,030 8,030 5,180 6,270 6,270 6,270 20.65
Monoblock 4.5 m 4.0 4.3* 4.3* 4.3* 2.5 4.0* 4.0* 4.0* 1.8 2.7* 2.7* 2.7* 7.2
15' 8,650 9,440 9,440 9,440 5,440 8,760 8,760 8,760 4,110 5,960 5,960 5,960 23.37
boom 3.0 m 3.7 5.6* 5.6* 5.6* 2.4 4.1 3.9 4.5* 1.6 2.7* 2.7* 2.7* 7.6
10' 7,990 12,090 12,090 12,090 5,170 8,960 8,580 9,840 3,610 6,010 6,010 6,010 24.78
5.0 m, (16'5'') 1.5 m 3.3 6.2 5.9 6.8* 2.2 4.0 3.8 5.1* 1.6 2.8 2.7 3.9* 1.5 2.7 2.6* 2.9* 7.6
5' 7,320 13,390 12,780 14,870 4,870 8,630 8,240 11,120 3,450 6,140 5,860 6,880 3,430 6,110 5,830 6,380 25.09
Stick 0.0 m 5.7* 5.9* 5.9* 5.9* 3.2 6.0 5.7 7.6* 2.1 3.8 3.7 5.5* 1.5 2.8 2.7 3.2* 7.4
0' 12,360 13,730 13,730 13,730 6,910 12,910 12,310 16,510 4,650 8,380 7,990 12,030 3,510 6,290 6,000 7,160 24.36
2.6 m, (8'6'') -1.5 m 5.8* 5.8* 5.8* 5.8* 5.7 10.2* 10.2* 10.2* 3.1 5.9 5.6 7.6* 2.1 3.8 3.6 5.5* 1.7 3.1 3.0 3.9* 6.9
-5' 13,000 13,000 13,000 13,000 12,400 23,370 23,370 23,370 6,790 12,770 12,170 16,620 4,570 8,290 7,910 12,040 3,920 7,050 6,720 8,700 22.49
Front dozer -3.0 m 5.9 10.0* 10.0* 10.0* 3.2 6.0 5.7 6.8* 2.2 4.0 3.8 4.8* 5.9
-10' 12,700 21,760 21,760 21,760 6,920 12,920 12,320 14,840 5,020 9,030 8,620 10,670 19.11
blade
Rear outriggers
16
Lifting Capacity
At the stick end, without bucket. Unit: 1,000 kg
For lifting capacity including bucket, simply subtract actual weight of bucket from the following values.
7.5 m 4.1 4.2* 4.2* 4.2* 3.4 3.9* 3.9* 3.9* 5.0
25' 8,890 9,680 9,680 9,680 7,990 8,820 8,820 8,820 15.91
6.0 m 4.1* 4.1* 4.1* 4.1* 2.6 4.1* 4.1* 4.1* 2.3 3.3* 3.3* 3.3* 6.4
2-piece boom 20' 9,000 9,050 9,050 9,050 5,510 9,160 8,990 9,160 5,170 7,510 7,510 7,510 20.65
4.5 m 6.1* 6.1* 6.1* 6.1* 3.9 4.8* 4.8* 4.8* 2.5 4.2* 4.1 4.2* 1.8 3.2 3.0 3.2* 7.2
5.1 m, (16'9'') 15' 13,040 13,040 13,040 13,040 8,600 10,460 10,460 10,460 5,430 9,290 8,900 9,340 4,110 7,110 6,820 7,110 23.37
3.0 m 3.6 6.0* 6.0* 6.0* 2.3 4.1 3.9 4.7* 1.6 2.8 2.7 3.2* 7.6
Stick 10' 7,910 13,040 13,040 13,040 5,160 8,980 8,600 10,360 3,620 6,380 6,100 7,130 24.78
1.5 m 3.3 6.2 5.9 7.1* 2.2 4.0 3.8 5.2* 1.6 2.8 2.7 4.3* 1.5 2.7 2.6 3.4* 7.6
2.45 m, (8'0'') 5' 7,290 13,350 12,740 15,520 4,860 8,640 8,260 11,490 3,470 6,180 5,900 8,080 3,450 6,150 5,870 7,490 25.10
Front dozer 0.0 m 4.3* 4.3* 4.3* 4.3* 3.1 6.0 5.7 7.7* 2.1 3.9 3.7 5.6* 1.6 2.8 2.7 3.7* 7.4
0' 10,120 10,120, 10,120 10,120 6,880 12,920 12,320 16,690 4,650 8,410 8,030 12,150 3,530 6,340 6,050 8,320 24.37
blade -1.5 m 5.7 9.0* 9.0* 9.0* 3.1 5.9 5.6 7.5* 2.1 3.8 3.6 5.4* 1.7 3.2 3.0 4.5* 6.9
-5' 12,440 20,810 20,810 20,810 6,800 12,830 12,220 16,290 4,600 8,350 7,970 11,820 3,960 7,110 6,790 9,920 22.49
rear outrigger -3.0 m 3.2 6.0 5.7 6.4* 2.4 4.5 4.3 5.1* 5.4
-10' 6,970 13,020 12,420 13,950 5,750 10,510 10,030 11,800 17.27
17
Lifting Capacity
At the stick end, without bucket. Unit: 1,000 kg
For lifting capacity including bucket, simply subtract actual weight of bucket from the following values.
7.5 m 4.2 4.2* 4.2* 4.2* 3.5 3.9* 3.9* 3.9* 5.0
25' 9,030 9,680 9,680 9,680 8,120 8,820 8,820 8,820 15.91
6.0 m 4.1* 4.1* 4.1* 4.1* 2.6 4.1* 4.1* 4.1* 2.3 3.3* 3.3* 3.3* 6.4
20' 9,050 9,050 9,050 9,050 5,610 9,160 9,020 9,160 5,270 7,510 7,510 7,510 20.65
2-piece boom 4.5 m 6.1* 6.1* 6.1* 6.1* 4.0 4.8* 4.8* 4.8* 2.5 4.2* 4.1 4.2* 1.8 3.2* 3.0 3.2* 7.2
15' 13,040 13,040 13,040 13,040 8,740 10,460 10,460 10,460 5,530 9,340 8,930 9,340 4,190 7,110 6,850 7,110 23.37
5.1 m, (16'9'') 3.0 m 3.7 6.0* 6.0* 6.0* 2.4 4.7* 4.0 4.7* 1.6 3.2* 2.7 3.2* 7.6
10' 8,050 13,040 13,040 13,040 5,250 10,360 8,620 10,360 3,700 7,130 6,120 7,130 24.78
Stick 1.5 m 3.4 7.1* 5.9 7.1* 2.2 5.0 3.8 5.2* 1.6 3.5 2.7 4.3 1.5 3.4* 2.6 3.4* 7.6
2.45 m, (8'0'') 5' 7,390 15,520 12,790 15,520 4,950 10,800 8,290 11,490 3,540 7,680 5,920 8,080 3,520 7,490 5,890 7,490 25.10
0.0 m 4.3* 4.3* 4.3* 4.3* 3.2 7.7* 5.7 7.7* 2.2 4.9 3.7 5.6* 1.6 3.5 2.7 3.7* 7.4
Front and rear 0' 10,120 10,120 10,120 10,120 7,020 16,590 12,360 16,690 4,750 10,550 8,060 12,150 3,610 7,900 6,080 8,320 24.37
-1.5 m 5.8 9.0* 9.0* 9.0* 3.2 7.5* 5.7 7.5* 2.1 4.8 3.7 5.4* 1.8 4.0 3.0 4.5* 6.9
outrigger -5' 12,670 20,810 20,810 20,810 6,940 16,290 12,270 16,290 4,690 10,490 8,000 11,820 4,040 8,880 6,820 9,920 22.49
-3.0 m 3.2 6.4* 5.7 6.4* 2.5 5.1* 4.3 5.1* 5.4*
-10' 7,110 13,950 12,460 13,950 5,870 11,800 10,060 11,800 17.27
18
STANDARD EQUIPMENT Oscillating front axle ±9° – Pull-up type front window
2-circuit travel brakes – Removable lower windshield
Engine Maintenance-free propeller shafts – Seat belt
Turbocharged, 6-cylinder Volvo diesel engine Stone protection rings – Front rain shield
with water cooling, direct injection and Front dozer blade and rear outriggers – Windshield wiper with intermittent feature
charged air cooler that meets EPA Tier 2 Toolbox, left-hand side – Stereo-radio with cassette
emission requirements Sun blinds, front, rear and roof
Air intake heater Superstructure Anti-vandalism kit assembly preparation
Electric engine shut-off Counterweight, 3,250 kg (7,165 lb) Master ignition key
Fuel filter and water separator Service walkway with anti-slip grating
Aluminium core radiator Centralized lubricating point for swing Hydraulic system
Protective net for radiator and hydraulic cooler bearing Load sensing hydraulic system
Switch to align superstructure to Hammer/shear piping
Electric/Electronic control system undercarriage Separate hammer return oil line
Contronics – computerized monitoring Quickcoupler piping
and diagnostic system Cab and interior Cylinder cushioning
Master switch Electronic climate control (ECC) Cylinder contamination seals
Automatic idling system Hydraulic dampening cab mounts Return filter of full flow type 2000 h
One-touch power boost Adjustable operator seat and exchange interval
Adjustable monitor joystick control console Pressure relief system (servo accumulator)
Engine restart prevention circuit Adjustable steering wheel column Thermostatically controlled cooling fan
Safety stop/start function Flexible antenna Hydraulic oil, ISO VG46
Travel alarm Hydraulic safety lock lever Pump flow control for hammer
High-capacity halogen lamps Control joystick with five switches each Two step pressure settings for attachments
– Frame-mounted 2 Cab, all-weather sound suppressed, Shut-off cocks for hammer/shear and return
– Cab-mounted 2 includes: line piping
– Boom-mounted 2 – Fabric seat, with heater and air suspension
Alternator, 80 A – Ashtray Digging equipment
Batteries, 2 x 12 V/140 Ah – Cup holder Monoblock, 5.0 m (16'5'')
Start motor, 24 V/4.8 kW – Lighter Stick, 2.45 m (8'0'')
– Door locks Attachment points for extra hydraulics
Undercarriage – Tinted safety glass Centralized lubrication point
Twin tires10.00–20 PR16 – Floor mat
2-speed power transmission plus creep speed – Horn
Travel speed 35 km/h (21.7 mph) – Large storage area
19
Volvo Construction Equipment is different. It’s designed,
built and supported in a different way. That difference comes
from our 170-year engineering heritage. A heritage of
thinking first about the people who actually use the machines.
About how to help them be safer, more comfortable, more
productive. About the environment we all share. The result of
that thinking is a growing range of machines and a global
support network dedicated to helping you do more. People
around the world are proud to use Volvo. And we’re proud of
what makes Volvo different – More care. Built In.
All products are not available in all markets. Under our policy of continuous improvement, we reserve the right to change
specifications and design without prior notice. The illustrations do not necessarily show the standard version of the machine.