Professional Documents
Culture Documents
2
a = 200 mm
h1 4.2
Ast 4.34
a
2 a a
h3 4.4
2 2
(O) c 1.6
h2 4.3
h14 4.9 e
360 Q b1 b3
(O) h2* R b5
1052 4.21 b1 2
4.4 4.25
35
m2 4.32
l
l1 4.19
Tiller Head
1 proportional lift / lower buttons
2 on / off for low speed or initial lift (option)
3 travel direction inverter button
4 butterfly control buttons for direction and
speed
5 horn
6 creep speed (opposite side)
2 1
5
3 6
4
(1)
Values refer to truck with two stage HiVi mast, (4)
Traction, lift, and lower speeds may vary with (7)
Add 75mm for fixed side protection. Add 114mm for
h3=2968mm alternative lift height fixed rear protection.
(2) (5) (8)
Values refer to truck with three stage FFL mast, Values determined by wheel friction, if climbing MS12X with mechanical steering, drive motor 2.2 Kw
h3=4628mm ramps frequently (within 1h), consult your salesman ( ) Value or text in parentheses refer to trucks fitted with
(3)
Values refer to truck equipped with named mast, and (6)
Add 61mm for fixed side protection, add 110mm for fixed side protection or fixed rear protection
battery as row 6.4. Add 50 Kg for fixed side fixed rear protection
protection or fixed rear protection
Models:
MS12X, MS12X-IL
MS15X, MS15X-IL
Tiller head and controls Power-assisted steering hours) provides low cost long operative
The tiller head is designed for operator The electric motor completely eliminates life. The servo-steering with brushless
comfort featuring an ergonomic shaped steering effort, making the truck light and type DC motor with permanent magnets is
handle with angled grips and integral hand easy to steer in all working situations. The maintenance free and incorporates the
guard. Large dimensioned, low effort power steering reacts so quickly that there electronic control system. The DC
butterfly buttons control direction of travel is no loss of performance compared to compound 3kw lifting motor provides
and speed as well as the electromagnetic manual steering. Mechanical steering is power in excess of the truck’s operative
brake. All controls are accessible without standard on the MS12X model. requirements.
having to lift the hand from the handle. Frame and forks Traction – steering unit
Dual lift and lower buttons are located on The frame is made of electro-welded The cast-iron gear train has helicoidal
the tiller head and can be readily accessed sheets, surface treated and varnished with gears running immersed in an oil bath. The
for left or right hand use. The travel a 2-pack epoxy paint. The overall chassis steering reduction is calculated to provide
direction inverter button is designed for width of 860mm makes the truck suitable maximum performance in every working
maximum angle of contact with the for manoeuvring in the narrowest aisles. situation. The motor is mounted vertically
operator’s body. When activated, the Standard forks are 65mm thick, and have for efficient ventilation and to eliminate
direction of travel is automatically reversed a low profile option of 55mm to allow the flexing stresses to the power cables to
and the truck comes to a stop. The horn is loading/unloading of non-standardised ensure reduced downtime. The steering is
located on top of the tiller head actuated loads. The robust fork structure is made effected by gears, a maintenance and
by thumb or forefinger. The creep speed with two solid longitudinal members regulation-free system based on higher
control allows the truck to be operated covered with a closing and reinforcing specification models
with the tiller arm in the vertical position at sheet. The IL versions ends of the forks are
reduced speed for manoeuvring in tight Hydraulic unit
equipped with entry rollers to enhance the The silent, powerful hydraulic pump,
confines. 4 preset performance settings handling of bottom boarded pallets.
provide different performance levels for activated by the electric motor, is of
forward and reverse travel speeds, reverse Initial Lift (option) and lift double gear type. The transparent tank
current braking, release braking, lift speed The initial lift increases the distance from facilitates checking of the hydraulic oil
and acceleration, easily selectable to suit the ground, allowing transfer on irregular level. Lowering is controlled by a solenoid
driver preference. surfaces, loading levels and ramps. The valve activated directly by the tiller
lift/lower control is provided by two pushbuttons.
The tiller arm is spring assisted and returns proportional push buttons located to the
automatically to the vertical position when Electronic controls
left of the tiller. The adjustable pull rods The Combi MOSFET controller manages
released. give uniform lifting and lowering movement both the AC traction engine and the DC
Instrumentation of the forks. The loading rollers are lifting motor and reduces the need for
The pallet truck’s dashboard features a tandem HD (Heavy Duty) with lubrication electrical contactors. Its high energy
multi-function indicator displaying points and sealed bearings. Speed is efficiency and high motor performance
information on the status of the truck and automatically reduced with load arms allow considerable hourly usage in
alarm conditions should they occur. The raised and traction is automatically cut operation, reducing battery charging. The
most important operational information when the forks are raised >1.5m (h3). combined characteristics of the traction
includes the battery discharge indicator, Battery motor and the control panel enhance
odometer and performance level. The red The battery compartment takes a battery efficiency of release and inversion braking,
mushroom button can be pressed to stop of up to 24V - 345 Ah capacity, which, without reduction of autonomy, leaving the
the pallet truck immediately in case of together with the characteristics of the electromagnetic brake for parking and
emergency. traction motor, allows considerable emergencies only. Electronic parameters
Operator Platform flexibility in operation. A vertical battery are easily customised by a service
The large operator platform allows the extraction option is available. technician. The operator can choose
operator to find their own comfortable Rollers and wheels between 4 pre-set performance levels.
driving position. Foldable side arms are All wheels are made from Vulkollan™. Options
high relative to the level of the platform, Tandem load wheels are standard, and
providing the operator with maximum Various options are available, including;
tandem load wheels with twinned rollers
comfort and stability when manoeuvring. and a fruit version are available as options. ● Cold store to -30°C
The “man on board” sensor integrated into An optional suspension mounted castor ● Wide range of masts
the platform prevents truck operation with enhances driveability and stability on ● Fixed side protection
no operator present. imperfect flooring. ● Fixed rear protection
Optional rear access and side access fixed Electric motors
protection types are available and are ● Twin-bed trolley for battery change
The AC 4 Kw drive motor gives instant
particularly suitable for shuttle activity over response to forward and reverse traction ● Vertical battery extraction
medium to long distances. inputs, providing considerable torque. The ● Load backrest
The top casing has compartments for maintenance free motor (inspection ● Dust ingress protection on drive motor
stationery and other small objects with an intervals required every 1000 operating
optional A4 reading stand. ● Reverse alarm