Professional Documents
Culture Documents
Content
Description Pages
Product introduction...................................... 1
Technical parameters.................................... 3.
Assembly instructions.................................... 4
Maintenance.................................................. 9
Welcome to purchase and use AS 510 hand-propelled type auto scrubber with cable and AS
510 E hand-propelled type auto scrubber.
This machine, intergrating the functions of floor washing and drying, is characterized
by covenient operation, safe use, high cleaning efficiency and effect. For this reason
it is an ideal machine to replace the convential scrubber. It is especially suitable for the
middle- large public places such as hotel, guest house, office building, exbhition venue
and school. Meanwhile, It is an important and indispensable cleaning equipment
among modern cleaning machinery.
AS 510 E auto scrubber can clean all stains on the hard floor and simuntaneously collect
the detergent solutions non-absorbed by the floor attributable to a mechanical rotating
movement of a disc brush and chemical action of water and detergent solutions
AS 510 E a single brush is driven by a direct gear reducer, with a strong cleaning capability
Thanks to its compact frame and dexterous appearance and high quality design, it takes
advantage of less floor occupation area, simple operation short and light frame and flexible
.
The device is not suitable for use in the rain or can’t be placed under a water gum. It is
forbidden to use the device to collect hazardous dust or flammable liquids in the flammable
and explosive environments.
2
3.0 Technical Parameters
4.2 Unpacking (1) cut packing belt : (2) take away the packing cartoon :(3) remove the
wood board: (4) take away attachments (5) use a slope to slide down the machine from
the wooden pallet.
5.2 Brush plate installation
Fuse is burnt
Power switch is damaged
Fuse is burnt because of brush motor
Brush motor is damaged or its wires
Relay is damaged
Fuse is burnt because of suction motor
Suction motor is damaged or its wires
The carbon brush of the suction motor is worn
Relay is damaged
Ball valve is opened too small or of
Flow switch is adjusted too small or off
Solution hose or filter is blocked
Water drainage solenoid valve is blocked
7
9.0 Maintenance
(2) Drain the water in the Sewage tank and rinse it with clear water. Check
whether there is a debris in the tank, If it is, clear it immediately,
Drain the remaining solvent in the clear water tank.
(3) Lift water scrubbing assembly off the ground and wipe the scrapper
with a wet towel.
(4) Remove the vacuum suction filter equipment and rinse it with water.
(1) Check the sewage tank cover seal. If it is damaged, please replace it
(2) Use specific lubricants to lubricate all lubrication parts and rotating shaft.
Dirty
Exploded view of AS 510 E Dirty Tank
Dirty
STEP TOWARDS CLEANING....