Professional Documents
Culture Documents
Quicke and Implement Retail Price List March 2016 V2.0
Quicke and Implement Retail Price List March 2016 V2.0
0
Quicke Dimension – Premium Loaders Original Implements
March
2016
Loaders AgLine
Choose a loader compatible to your requirements from the specification sheet on page 2 and 3 of the Choose the implement you require
1
price list.
Use the recommendatiins as a guide to chose to correct implement for you tractor
2 Select the appropriate price sheet for the tractor to which the loader is to be fitted.
Select the tractor model from the left-hand column and the loader model along the top row of the sheet. If Ordering Information
there is a price specified at the intersection of the column and row, this is a recommended match for the
tractor and loader.
1 Take down the Model and type of implement you require
Four other possibilities should be noted here… Model example - Silograb 170 (170 = 1.70m wide)
a. No price specified Not a recommended match 2 Make and Model of front loader or handler for some AgLine implements
b. Black Intersection The loader will NOT fit the tractor. 3 Type of hook system required
c. Shaded Intersection 8,150 US/UM subframes available only 4 Note the discount code A or B and retail price
d. Loader format not available US/UM subframes only 5 Email your order to your area manager or to sales@alo.uk.com.
Some loaders may require extended bearing boxes and are FOC when ordered with loader.
Extra cost when ordered afterwards – see notes .
Ensure the implement is right for your machine
The price specified at the intersection comprises of the following components:
Ensure you check that your implement selection is recommended for your loader or
Non parallel Loader. the work to carry out.
Price includes Euro tool carrier, mechanical latching (c/w Clic-On), factory fit 3rd service.
Parallel Loader.
Price includes Euro implement carrier, mechanical latching (c/w Clic-On) and factory fit 3rd service
and Electric SoftDrive .
Subframe. (Also refer to page 4)
Short subframes (price code DS or DM) usually mount from the front bolster of the tractor to the front
of the transmission. 2nd year warranty on Silocut SG covers structure only and does not include any wearing
Long subframes (price code DSX or DMX) run the entire length of the tractor, to the rear axle. part(s) or hydraulic components.
Tractor front grille-guards (if applicable) are included in the price.
Some ‘DMX’ subframes are priced as ‘DM’.
1 Only use the recommendations in this price list.
Occasionally additional items (e.g. Exhaust elbows, Power beyond plates etc) may also be required
but not necessarily specified; therefore it is important to check with our sales office before calculating Alo UK will not accept any responsibility if damage or failure occurs as a consequence or
the final price. On some occasions, it may be necessary to obtain optional parts from the tractor 2 an incorrect implement to tractor/telehandler combination. I.E. Implement too large for
manufacturer. loader/handler, .loader/handler is too large for implement
When a shaded intersection is shown, a US or UM subframe is used
The Machinery Directive 2006/42/EC applies to all material handling machinery and
Hydraulic Valves should be interpreted in conjunction with all ROPS (Roll Over Protection Structure) and
ErgoDrive LCS mono-lever control valve comes in either Open Centre (OC) or Load Sensing (LS) 3 *FOPS (Falling Object Protection Structure) to ensure operator protection. Please
configuration. familiarise yourself with Machinery Directive 2006/42/EC.
EasyDrive LCS Code “EY” (EasyDrive) is also available or upgrade to ElectroDrive LCS Pro. *Do not mount a non-parallel loader to a tractor without FOPS*
Hose kit options may also be available for you tractor.
Note – a conversion kit may be required depending on loader/hydraulic combination Rear counterweight must be used with front loaders in accordance with regulation EN
4
Finally, choose from our large selection of implements at the rear of the price list. 12525 (See page C 1)
Should you wish to discuss your choice in more detail, please contact your local Alo UK Area Manager (phone numbers are in the inside back cover)
or contact the Alo UK Sales Office direct on 01299 250922, Fax 01299 250944, E-mail: mail@alo.uk.com
Alo UK price list covers all UK markets excluding Northern Ireland. All prices are in Pounds Sterling.
All prices are excluding VAT. We hold a policy of continuous improvement. We reserve the right to change product specification and prices at any time without prior notice.
1
NON PARALLEL PARALLEL (Self Levelling)
Loader Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78 Q88 Q98
Standard equipment → Euro T/C c/w clic on, 3rd service and Lock & Go Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go
Max recommended tractor weight Kg 4000 4000 4500 5200 6000 4000 4000 4000 4500 4500 4500 5200 5200 6000 6000 7000 7000 9000 13000
Tractor size 50-80 50-80 60-100 80- 120 100-150 50-80 50-80 50-80 60-100 60-100 60-100 80-120 80-120 100-150 100-150 120-190 120-190 >150 >200
Lift height to pivot pin A m 3.50 3.50 3.75 4.00 4.25 3.50 3.50 3.65 3.75 3.75 3.90 4.00 4.00 4.25 4.25 4.50 4.50 4.95 4.95
Lift height under level bucket B m 3.20 3.20 3.45 3.70 3.95 3.20 3.20 3.35 3.45 3.45 3.60 3.70 3.70 3.95 3.95 4.20 4.20 4.65 4.65
Lift capacity max lift height 80 cm from pivot pin X Kg 1220 1450 1500 1640 1970 1310 1590 1310 1630 1920 1600 1720 2010 2120 2450 2120 2430 2770 2600
Lift capacity 1.5 m lift height 80 cm from pivot pin Kg 1250 1500 1560 1680 1980 1440 1740 1360 1800 2110 1720 1930 2250 2250 2590 2370 2700 3050 3210
Lift capacity ground level 80 cm from pivot pin Kg 1390 1660 1730 1860 2130 1530 1840 1380 1910 2250 1800 2070 2410 2330 2680 2540 2900 3340 3610
Lift capacity max lift height at pivot pin Kg 1760 2060 2150 2310 2710 1520 1800 1520 1900 2210 1890 2060 2370 2440 2780 2490 2820 3070 2880
Lift capacity 1.5 m lift height at pivot pin Kg 1980 2310 2430 2560 2910 1640 1950 1560 2060 2390 1980 2200 2530 2520 2870 2650 3000 3400 3590
Lift capacity ground level at pivot pin Kg 2310 2690 2810 2920 3220 1920 2270 1750 2400 2770 2220 2520 2890 2790 3170 2990 3380 3930 4210
Max tear-out force 800 mm out from pivot pin 2410 2410 2800 2840 3360 2380 2380 2330 2770 2770 2830 2810 3850 3360 4470 3870 4480 4460 4450
Dump angle (degrees) D Min 58 58 59.7 55.5 52 58 58 58 59.7 59.7 54.5 55.5 55.5 52 52 52 52 48.5 50
75 75 75 80 80 80 80 90 85 95 90 100 100 100
Implemet cylinder dimensions 75/40 75/40 80/40 80/40 85/40
40/40 40/40 40/40 40/40 40/40 40/40 40/40 40/40 40/40 40/40 40/40 50/50 50/50 50/50
Lift cylinder dimensions 70/40 75/40 80/40 85/50 90/50 65/40 70/40 65/40 75/40 80/40 75/40 80/40 85/50 85/50 90/50 90/50 95/50 95/50 100/50
Lifting time to max lift height at 60 l/min Sec 3.8 4.4 5.0 5.7 6.9 3.3 3.8 3.4 4.4 5.0 4.4 5.1 5.7 6.2 6.9 6.9 7.7 9.5 9.9
Softdrive No Yes
Loader weight Kg 450 450 515 554 628 521 521 544 585 585 595 621 621 721 721 760 760 838 935
Lift heights for loaders mounted on to US and UM subframes are approximate. Heights will differ!
Euro Combi tool carriers available for Euro No 8/Alo 3 hooks, Euro No 8/Trima SMS hooks and Euro No8/MX, Euro/Faucheux - additional £200.
2
Technical data
Reference values for specification charts. Hydraulic Data.
OPEN CENTRE HYDRAULIC SYSTEMS
Normally, manufacturers specified values are obtained at
a hydraulic oil pressure of 185 bars with a flow rate of 60
litres per minute.
T
T
P P
LS
Use the above diagram as a reference chart for the specification page. Serial
Depending on make and model of tractor, lift heights for loaders may differ to specification!
Non-Parallel loaders Parallel loaders Excellent visibility Great hitching visibility Strong construction Clic-On quick attach
3
Loader Prices, Subframe Codes and Prices Subframe widths
Loader Loader Subframe Compatibility Subframe Codes
900mm A
Model Price DS DM DL DXL US UM Codes Prices
• •• •
Non Parallel
Q61 £5,870
• n/a DMX
DL
£1,795
£2,295 B
Q36
Q38
£5,120
£5,420
• •• •
n/a
DXL
SP1
£2,495
£4,795 1040mm
Q39
Q46
£5,520
£5,620
•• •
n/a
SP2 £6,000
US UM System "DM" Delta wide
A. Subframe saddle close to loader
beam pivot point.
Parallel Loaders
Q48
Q49
£5,920
£6,120
•• n/a
n/a
n/a
S SX M MX £1,795
Hydraulic Codes
"UM" System B. 30 mm upright.
C. 200 or 250 mm deep upright.
D. Lock & Go connection.
Q56
Q58
£6,320
£6,620 n/a
•• n/a
• • n/a
Cable Controlled
OC & LS £1,075
Benefits
Vertical point coupling.
Q66
Q68
£7,120
£7,420
•• • n/a SHK
Hose Set
£575 1200mm
Larger dimensioned subframe.
Maximum space for tractor servicing.
Q76
Q78
£7,720
£8,020
•• n/a
• HK (deluxe)
HK3 (live 3)
£1,275
£775
standard width
"DL" Extra wide
For large high horsepower
D
Q88
Q98
£9,920
£10,920
n/a • •
n/a
n/a Electric Controlled
EY £1,575
tractors
4
ErgoDrive LCS Kits Couplers LCS MultiCoupler MC4
Monolever
Single multicoupler for
and Control Valve LCS control valve. Mounts
directly to control valve,
incorporates electrical
5
Live 3 - simultaneous tip/crowd 3rd service operation
LCS ElectroDrive c/w Live 3 Or Retro Fit Live3
Retro fit Live3 is only
compatable with and
existing LCS ElectroDrive
Professional which has
Live3 electrical connection
What is Live 3 on the master unit.
Part number
Live3 enables the operator to use the loader's 5034283
implement cylinders and the 3rd service Price
Contact
simultaneously, so you can open and close the Alo UK
implement while tipping and crowding. This *Order hose set
decreases working time when operating with Live3 is only available in 1. Hose kit as a retro fit kit.
hydraulic implements. Some 3rd service fuctions conjuction with latest LCS Hose kit is ordered as per
not available with Live3 ElectroDrive Professional loader model.
system.
Contact Alo UK for more 2. Order loader with hose
info set pre-installed in loader
Live 3 Pricing Or beam
SPECIAL ORDER ONLY Live3 valve c/w Hose kit* with Contact
Price
ElectroDrive Pro, Live3 individual couplers Alo UK
c/w Hose kit* with £2,755 Live3 valve c/w Hose kit* with
Price
Contact
individual couplers Multicoupler MC2** Alo UK
ElectroDrive Pro, Live3
c/w Hose kit* with £2,905 LCS MultiCoupler MC2**
Multicoupler MC2** Single multicoupler for
Live3 valve. Mounts
directly to Live3 valve,
What you get incorporates electrical
Loader comes c/w all Live 3 hoses factory * LCS ElectroDrive Professional c/w Live 3 valve connector
installed (when ordered as a package). together with specific hose kit for your loader Part number
ElectroDrive Professional Live 3 model. 5220541
valve set mounts to the tractor in the same way as The standard 3rd service is not required with Live 3 Not required if ordered with hose
the standard LCS ElectroDrive valve kit (as above**)
Price £215
6
Specialist Equipment
AAC Sensor (ElectroDrive Pro only) Hose Burst Protection
The sensor controlled AAC (Automatic Angle Control) enables the driver to The Hose Burst Protection kit (HBP) prevents unintentional dropping of the
automatically return the implement to a preset tilt angle. loader or implement in the event of hydraulic hose failure.
Operation mode 1 Will only mount to premium series loader models
One kit mounts to all loader models.
Quick Retrospective fit/dealer installation
Designed according to Agricultural machinery – Front loader – Safety standard
Lower the loader beam and the bucket will
EN12525:2000+A2:2010
return to the pre-set position.
Operation mode 2
Safe
The bucket movement and loader beam
movement are programmed to be synchronised.
First, the bucket moves into the pre-set position
(set time between 1 to 8 sec). After the bucket
has reached the pre-set position, the loader
beam will start lowering.
Operation mode 3 Showing positions
of “hold” valves
Single on cylinders.
Only for LCS ElectroDrive Professional from serial no: 40632 and new joystick
version from P/N 5101130 >
The following functions will not operate with HBP - Hose Burst
AAC Sensor
SoftDrive (all LCS systems) Protection
Float function (all LCS systems)
Part No 5220738 Part No 5220850
New AAC Sensor (ElectroDrive) [loader lowering,
bucket return works]
Price £165 Bucket shake (ElectroDrive) Price £900
7
Control Valve Conversions Kits
LCS LOADER ONTO pre-LCS HYDRAULICS (New loader to old valve) LCS LOADER ONTO pre-LCS HOSE SET (New loader to old valve)
Flat face female couplings 1 ½” Coupler Kit Old style 1/2" male 4 Hose Interface Kit
and male Deutsch plug coupling interface
This kit allows LCS Quicke This kit allows LCS Quicke
Dimension loaders to mount Dimension loaders to mount
onto the previous valve onto the Pre-LCS hose sets
system using ½” quick using the Multicoupler MC4
release couplings. and individual flat face
couplers.
Male 7 pin - Female multi pin
Old style Walvoil or Nord Male 7 pin - Female multi pin Female 7 pin - Male multi pin
3 Interface Kit
to 6 Multicoupler Kit
Allows LCS loader with fit to This kit allows pre-LCS
Multicoupler and flat face
individual couplers to connect to Quicke Dimension loaders to
an existing valve type. mount onto the LCS valve
system using the
Ideal when using one loader on
two tractors - 1 x pre-LCS and
Multicoupler MC4
one x LCS. Kit.
Kit 1 or 2 also required Female 7 pin - Male multi pin
8
QD Loader Options
SoftDrive c/w Electric Shut Off SoftDrive Electric Control Additional SoftDrive Kit
Required Information
serial number or In cab electric shutoff
loader model, loader width solenoid kit
loader age if LCS ready (for Dimension series loaders
with existing manual control
Includes - accumulators and SoftDrive)
In cab electric shutoff
solenoid kit (a) Pre LCS, (b) LCS loaders Additional SoftDrive kit for Retrospective fitment
Retrospective fitment older Quicke Dimension
(a) 5215241 Part No Price
£125 loaders Q20 - Q85X loaders
Price £450 (b) 5220526 Mounts in conjuction with existing kit. 5220576 £150
Retrospective fit
Coloured Loader
c/w control knob clamp, Part No Price LED loader illumination kit
7 pin plug and bracket. 313411 £120 for dealer installation. 5048217 £295 £200
See Other Options page for older loader options
A9
QD Loader Tool Carrier/Adapter Options
Alo No 3 Connection Options Trima No 5 (SMS) Connection Options
Will fit Euro No 8 Euro-Combi Mailleux/MX Will fit Euro No 8 Euro-Combi Faucheux
Will fit from Euro Will fit from Euro
implement hooks 8 + MX Implements implement hooks 8 + FX implements
No 8 tool carrier No 8 tool carrier to
and MX and Faucheux
*Factory fit tool carrier to Mailleux/MX Retrospective fit adapter *Special order tool carrier Faucheux (McConnel) Retrospective fit adapter
implement hooks. implement hooks
implement hooks. implement hooks.
DM width only Price £200 830585 £400 DM width only Price £200 830600 £400
*Note - Tool carrier prices are for 'Factory Fitment' or 'Special Order'. Tool carriers ordered after delivery incur additional costs.
Hydraulic Locking - Q Lock. Selecto Fix Options
Part Nos listed are for DM Switch Kit
Loader Part Implement Part
width loaders and LCS Rocker switch kit to
ready loaders activate Q-Lock on a Quick coupling mounts
5220693 Euro 8 second tractor to tool carrier. 3/8" Coupler connected
5220699 Euro + 5 (a) Pre LCS, to implement hoses.
Loader Flat face easy to clean
requires 3rd 5220704 Euro + 3 (b) LCS loaders
service
5220708 Euro + MX (a) 5201088
£50 10550380 £250 10550180 £60
Retrospective fit Price £450 Retrospective fit (b) 5033992
See Other Options page for older loader options
10
Other Optional Equipment
QD Loader Bearing Boxes DM Subframe Lock & Go Activators DM Bearing Boxes Conversion
Parallel 1 Extended 2 3
LCS Conversion maybe rqd'
loaders Note:
only No Extra Cost when ordered Q755 4500123
Activators do
with new loader not come with Q770 4500124
Only for specified loaders new subframes.
Extra cost applied when Q950 4500063
ordered after delivery POA . Q960 Q970 4500064
Retrospective fit
Q980 4500065
Factory fitment Activators for Delta subframe Part No Price Q985 4500066
Converts 700/900 UM
Price £0 on second tractor. 2 required. 60008211 £17 each to mount to DM Price £895
↓Older loader options ↓
Hydro Quick Pre LCS Hydro Quick Bracket Set Pre LCS Shock Absorbers (older loaders)
4 Complete 5 For use with all 6
* On L/H bearing box
Single action multi coupler hose kit options.
** Mounted to crosstube
(requires 5201154
5201154 £395 Hydro Quick).
Valve Part Older loader Series Part No Price
Half option Does not include Q310 upto 670 * 314010
5201155 £265 Hydro Quick valve Q465 675 695 * 314070
Does not
Loader Part include
Q720 750 910-940 960 1060 ** 5048136 £450
Will not fit to Half option Hydro Quick Part No Price Q760 770 950 970-990 10 ** 5048137
LCS valve valve part
5201227 £195 10301570 £90 Other Loader makes 314100
Older loader Series Part No Price Older loader Series Part No Price
Q230, 330 & 430 313403 Q230, 330 & 430 313404 Euro Combi 700 series up to 246799
£495 10 series
Q310 340 415 445 450 600 313413 £495 Q310 340 415 445 450 600 313414 Euro No 8 246800 £450
Q675 695 700 900 10 10550218 Q675 695 700 900 10 series 313325 £295 E/C 8-5-3 300 to 10 series
Older loader options
11
Type NON-PARALLEL PARALLEL Prices - £ Sterling
Width DM DM
Case IH
Hydraulic
Option
Subframe
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78
Std Equip' → Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only) Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)
Max front
Tractor model NB wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std Opt
785, 885, 985, 795, 895, 995, 4220 - 4240 X 6,540 7,040 7,740 7,790 SX OC
CS 78, 80, 86, 90, 94, and 85, 95, 100, 105 pro A, F 380/70 R24 7,040 7,740 8,190 8,290 8,590 8,790 8,990 DM OC LS
CVX 120, 130, 150, 1135, 1145, 1155 (Steyr) D 480/70 R30 9,790 10,090 10,390 DM LS HK
CVX 140, 150, Tier 3 Models (Steyr) D, L 480/70 R30 9,990 10,290 10,590 DM HK EY
CVX 160, 175, 195 Tier 3 Models (Steyr) L 480/70 R30 10,590 DM HK EY
CX 70 - CX 85 A 12.4 x 24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,590 8,790 DM OC
CX 95 - 105 A 13.6 x 24 6,840 7,040 7,740 8,090 8,190 8,290 8,590 8,790 8,990 DM OC
Farmall 65A 75A A 11.2 R24 6,540 Also check out the Versa-X range 7,790 Also check out the Versa-X range DM OC
Farmall 75A. 90A, 100A, 110A R 11.2 x R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
Farmall 85A, 95A, 105A, 115A A 14,9 x 24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
M, Q,
Farmall 55C, 65C, 75C S
280/85 R24 6,540 Also check out the Versa-X range 7,790 Also check out the Versa-X range DM OC
Farmall 85C, 95C and 105C EP Q, S 14,9 x 24 6,540 6,840 7,790 8,190 DM OC
Farmall 95U, 105U, 115U A, N 480/65 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM LS
Farmall 95U Pro, 105U Pro, 115U Pro A, P 480/65 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM LS EY
JX 55 - JX 70 and Tier 3 A 11,2 x 24 6,540 Also check out the Versa-X range 7,790 Also check out the Versa-X range DM OC
JX 75, JX 80, JX 85, JX 90 and Tier 3 A 13,6 x 24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
Width DM DM
Case IH
Hydraulic
Option
Subframe
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78
Std Equip' → Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only) Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)
Max front
Tractor model NB wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std Opt
JXC 1060 - JXC 1095, Quantum 65C - 95C A 320/70 R24 6,540 7,790 8190 DM OC
JXU 70 - JXU 115 A 13,6 x 24 6,540 6,840 7,040 7,740 7,790 8090 8190 8290 8790 DM OC
JXU 1070 - JXU 1100 A 540/65 R24 6,540 6,840 7,040 7,740 7,790 8,090 8,190 8,290 8,790 DM OC
C, G,
MAXXUM 100, 110, 120, 130 MC, X Line 4 cyl H, K, T
480/65 R28 7,240 7,940 8,490 8,790 8,990 9,190 DM HK LS
C, G,
MAXXUM 115, 125, 140 MC and X Line 6 cyl H, K, T
480/65 R28 7,940 8,740 9,190 9,490 9,990 DM HK LS
MAXXUM 110, 120, 130 standard 4 cyl EP H, K, T 480/65 R28 7,040 7,740 8,290 8,590 8,790 8,990 DM LS
MAXXUM 110, 120, 130 MC and CVX 4 cyl EP H, K, T 480/65 R28 7,240 7,940 8,490 8,790 8,990 9,190 DM HK LS
MAXXUM 115, 125, 140 Standard 6 cyl EP H, K, T 14,9 x 28 7,740 8,540 8,990 9,290 9,790 DM LS
MAXXUM 115, 125, 140 M/controller 6 cyl EP H, K, T 14,9 x 28 7,940 8,740 9,190 9,490 9,990 DM HK LS
MAXXUM 115, 125, 135, 145, 150 M/C CVT T4B H, K, T 540/65 R28 7,940 8,740 9,190 9,490 9,990 DM HK LS
MX 80c, MX 90c, MX 100c B, G 16,9 x 24 7,040 7,740 8,290 8,590 8,790 8,990 DM LS
MX 100, MX 110, MX 120, MX 135 B, G 480/65 R28 8,540 9,790 10,090 10,390 10,690 DM LS
MXM 120, MXM 130, MXM 140, MXM 155 G 540/65 R28 8,740 9,990 10,290 10,590 10,890 DMX LS
MXU 115, MXU 125, MXU 130, MXU 135 + X Line C, G, H 480/65 R28 7,740 8,540 8,990 9,290 9,790 DM LS OC
T
Multicontroller
540/65 R28 8,740 9,990 10,290 10,590 DM HK EY
PUMA 150, 165, 175 and CVX Tier 4B K, T, U 600/65 R28 9,040 10,290 10,590 10,890 DM EY E
PUMA 185, 200, 220 EP & CVX, 240 CVX T4B K, T, U 600/65 R28 10,890 11,190 DM EY E
PUMA 180, 185, 195, 200, 210, 215, 225, 230 + CVX
J, K, T 600/65 R28 10,590 10,890 DM HK EY
+ Multicontroller
A DMX subframe priced as DM G Will not fit tractors with wide weight carrier T Order loader ready harness from CNH harness #84167030 and 2 relays #82017871.
B Tractor must be equipped with power beyond plate H Deluxe Hose kit only with Multi Controller arm rest U Hydraulic sets do not fit tractors with mid-mount valve. Use standard hose set
C Additional kit 10377122 req'd for axle suspension J Deluxe hose kit and hose kit for factory fitted mid-mount valve available.
E Check type of front hitch mounted to tractor K Tractor must be ordered with loader ready Multi Controller joystick
* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.
* For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200
13
Type NON-PARALLEL PARALLEL Prices - £ Sterling
Width DM DM
Claas
Hydraulic
Option
Subframe
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78
Std Equip' → Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only) Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)
Max front
Tractor model NB wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std Opt
Ares 546, 556, 566 C 440/65 R28 7,040 7,740 8,290 8,590 8,790 8,990 DM LS OC
Ares 547, 557, 567, 577 C, H 440/65 R28 7,040 7,740 8,290 8,590 8,790 8,990 DM LS OC
Ares 616, 626, 636, 656, 696 B, C, D 480/65 R28 7,940 8,740 9,190 9,490 9,990 DMX LS OC
Ares 617, 657, 697 C, H 480/65 R28 7,940 8,740 9,190 9,490 9,990 DMX LS OC
Arion 410, 420, 430 G, J 340/85 R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC HK
Arion 410, 420, 430, 440, 450, 460 Tier 4 G 340/85 R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC HK
Arion 510, 520, 530, 540 CIS/CEBIS E 480/65 R28 7,240 7,940 8,490 8,790 8,990 9,190 DMX LS OC
Arion 530, 540, 550 CIS/CEBIS Tier 4i L, M, N 480/65 R28 7,740 8,290 8,590 8,790 8,990 9,290 DM LS HK
Arion 610, 620, 630, 640 CIS/CEBIS E 480/65 R28 7,940 8,740 9,190 9,490 9,990 DMX LS OC
Arion 620, 630, 640 650 CIS/CEBIS Tier 4i L, M 480/65 R28 9,040 10,290 10,590 10,890 DM EY HK
Atos 220, 230, 240 Q 360/70 R24 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
Atos 330, 340, 350 Q 420/85 R24 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
Axion 810, 820, 830, 840, 850 CIS/CEBIS/C-MATIC F 600/70 R28 11,090 11,390 DMX EY HK
Axion 810, 830, 840, 850 C-MATIC and HEXASHIFT
Tier 4
F 600/70 R28 Turn to Q88/Q98 page
Axos 310, 320, 330, 340 G 340/85 R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC
Celtis 426, 436, 446, 456 A, G 440/65R28 7,040 7,740 8,290 8,590 8,790 DM OC
Elios 210, 220, 230 Tier 3 K 320/85 R20 6,540 Also check out the Versa-X range 7,790 8,190 DM OC
Elios 210, 220, 230 and 240 Tier4i K, P 320/85 R20 6,540 Also check out the Versa-X range 7,790 8,190 DM OC
Nectis 217, 227, 237, 257, 267, VL 280/70 R18 6,540 Also check out the Versa-X range 7,790 8,190 DM OC
Nectis 227, 247, 257, 267 F 280/70 R20 6,540 Also check out the Versa-X range 7,790 8,190 DM OC
A Will fit with Lemoine front hitch. Will also fit w/o front hitch F Deluxe hose set will only mount to tractor with Bosch hydraulics M Deluxe hose set will not fit with hydraulically extendable trailer hitch
B If tractor has original 3.5T front hitch, order DM subframe only G DMX subframe priced as DM N Q46/Q48 must be ordered with extended bearing boxes with front hitch.
C Subframe prepared with spacers for front hitch H Check if tractor has Arion style hydraulic system P The hydraulic set will not fit tractors with electro hydraulic valve.
D If 3.5 T front hitch mounted, contact Alo UK J Hose kit mounts to midmount valve and electric joystick. Q Order Q36/Q38 with long bearing boxes for tractors with wheels larger than 420/70 R24.
E Check if load sensing and or open centre L Check if tractor is fitted with factory fitted siderails X US subframe - NOT DM Lock & Go
* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.
* For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200
14
Type NON-PARALLEL PARALLEL Prices - £ Sterling
Width DM DM
Deutz
Hydraulic
Option
Subframe
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78
Std Equip' → Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only) Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)
Max front
Tractor model NB wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std Opt
Agrofarm 85, 100 H 420/65 R24 7,040 7,790 8,090 8,190 8,290 DM OC
Agrofarm 410, 420, 430 H 420/65 R24 7,040 7,790 8,090 8,190 8,290 DM OC
Agrofarm 420, 430 Profiline and TTV H 420/65 R24 7,040 7,790 8,090 8,190 8,290 DM LS HK
Agrolux 45, 55, 60, 65, 70, 310, 320 K, M 280/85 R20 Use the Versa-X range Use the Versa-X range DSX OC
Agrolux 57, 67 K 320/70 R20 Use the Versa-X range Use the Versa-X range DSX OC
Agrolux 77, 87, 97 L 320/70 R24 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
Agroplus 75, 85, 95, 100 420/65 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
Agroplus 67, 77, 87 320 70 R24 6,540 Check out the Versa-X range 7,790 Also check out the Versa-X range DSX OC
Agroplus 310, 315, 320, 410, 420 & Ecoline N, P 320/85 R20 6,540 Check out the Versa-X range 7,790 Also check out the Versa-X range DM OC
Agrotrac 610, 620 R 480/70 R28 7,740 8,540 8,990 9,290 9,790 DM OC
Agrotron 6.00, 6.01, 6.05, 6.15 16.9 x 26 7,740 8,540 8,990 9,290 9,790 10,090 DM OC
Agrotron 6.20, 6.30, 6.45 A 540/65 R28 8,540 9,790 10,090 10,390 10,690 DM LS OC
Agrotron 80, 85, 90, 100 13.6 x 24 7,040 7,740 8,290 8,590 8,790 8,990 DM LS
Agrotron 105, 106, 108, 110, 118, 128 16.9 x 26 7,740 8,540 8,990 9,290 9,790 10,090 DM LS
Agrotron 120, 130, 140, 150, 155, 165 MkI & MkII 540/65 R28 8,540 9,790 10,090 10,390 10,690 DM OC
Agrotron 120, 150, 165 MkIII C 540/65 R28 8,540 9,790 10,090 10,390 10,690 DM LS
Agrotron 120, 130, 150 MkIII B 540/65 R28 8,540 9,790 10,090 10,390 10,690 DM LS
Agrotron 140, 155, 165 MkIII 540/65 R28 8,540 9,790 10,090 10,390 10,690 DM LS
A Check tractor hydraulic system - LS or OC. L If tractor has Lochmann cab contact your area manager HK Deluxe hose kit only (Ergodrive not available)
B Adapted for engine type BF6M1013EC M Subframe will fit Agrolux 60, 70 manufactured after 1st Jan 2008 - Power Beyond plate may be required from Deutz on some models
C Adapted for engine type BF6M2012C N Order aditional set 10412460 for tractor c/w air brakes (extra cost)
H Q36/Q38 requires extended bearing boxes R Dynamic mudguards only
K 4WD tractors only S Will fit tractors with 2 point foldable ROPS or Lochmann cab.
* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office. For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200
15
Type NON-PARALLEL PARALLEL Prices - £ Sterling
Width DM DM
Deutz
Hydraulic
Option
Subframe
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78
Std Equip' → Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only) Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)
Max front
Tractor model NB wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std Opt
Agrotron 150.7, 165.7 F 540/65 R28 8,540 9,790 10,090 10,390 10,690 DM LS
Agrotron 120, 130, 150 and Profiline C 540/65 R28 8,540 8,990 9,290 9,790 10,090 DM LS EY
Agrotron K90, K100, K120 and K410, K420, K430 G 7,040 7,740 8,290 8,590 8,790 8,990 DM LS OC
Agrotron M410, M420 G, J 540/65 R34 7,040 7,740 8,290 8,590 8,790 8,990 DM LS OC
Agrotron M600, M610, M615, M620, M625 G, J 540/65 R34 7,740 8,540 8,990 9,290 9,790 DM LS HK
Agrotron TTV410, TTV420, TTV430 J, M 540/65 R34 8,240 9,040 8,790 9,090 9,290 9,490 9,790 10,290 DM EY OC
Agrotron TTV 1130, 1145, 1160, TTV610, 620 D, E 540/65 R28 8,740 9,990 10,290 10,590 DM HK
Agrotron TTV 630, TTV7210, TTV7230, TTV7250 600/70 R30 Turn to Q88/Q98 page
J, Q,
5100, 5110, 5120, 5130 Basic, Profiline T 560/85 R28 7,040 7,740 8,290 8,590 8,790 8,990 DM LS OC
U
5090C, 5100C, 5110C J, Q 560/85 R28 7,040 7,740 8,290 8,590 8,790 8,990 DM OC EY
5080D, 5090D and Ecoline J, Q, X 360/70 R20 6,540 Also check out the Versa-X range 7,790 Also check out the Versa-X range DM OC EY
5090.4 D, 5090.4 D Ecoline and 5100.4 D W 360/70 R20 6,540 Also check out the Versa-X range 7,790 Also check out the Versa-X range DM OC EY
5090.4G, 5105.4G, 5115.4G H 560/85 R28 7,040 7,790 8,090 8,290 8,790 DM OC EY
J, T, U
6120.4, 6130.4, 6140.4, 6150.4, 6160.4 V
540/65 R24 7,040 7,740 8,540 8,290 8,590 8,790 8,990 9,290 9,790 DM LS EY
6120.4, 6130.4, 6140.4, 6150.4, 6160.4 P and TTV E, G, V 540/65 R24 7,540 8,240 9,040 8,790 9,090 9,290 9,490 9,790 10,290 DM EY HK
6140, 6150, 6160 E, J, U 540/65 R28 7,740 8,540 8,990 9,290 9,790 DM LS EY
6140, 6150, 6160 Profiline and TTV E 540/65 R28 8,240 9,040 9,490 9,790 10,290 DM EY E
16
Type NON-PARALLEL PARALLEL Prices - £ Sterling
Width DM DM
Fendt
Hydraulic
Option
Subframe
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78
Std Equip' → Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only) Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)
Max front
Tractor model NB wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std Opt
Farmer 304, 305, 306, 307, 308 LS/LSA 405/70 R20 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM LS
Farmer 309, 310 LS/LSA 13.6 R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC
Favorit 509, 510C 405/70 R20 7,040 7,740 8,290 8,590 8,790 8,990 DM LS
206S, 207S, 208P, 209P, 210P, 211P 405/70 R20 6,540 Also check out the Versa-X range 7,790 8,190 DM LS HK
207, 208, 209, 210, 211Vario 6,540 6,840 7,040 7,790 8,190 8,290 8,790 DM LS HK
307C, 308C, 309C C 13.6 R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC HK
309, 310, 311, 312, 313 Vario C, F 480/65 R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC HK
309, 310, 311, 312, 313 Vario SCR C, F 480/65 R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC HK
310, 311, 312, 313 Vario Tier 4 C, F, N 540/65 R24 7,540 8,240 8,790 9,090 9,290 9,490 DM EY HK
411, 412, 413, 414, 415 Vario A, B, H 540/65 R26 7,740 8,990 9,290 9,790 DM LS HK
512, 513, 514, 516 Vario SCR 540/65 R28 7,940 9,190 9,490 9,990 DM HK EY
711, 712, 714, 716 Vario H 540/65 R30 8,740 9,990 10,290 10,590 DM HK LS
714, 716, 718 Vario SCR M 540/65 R30 9,990 10,290 10,590 10,890 DM HK EY
819, 822, 824, 826, 828 Vario SCR Turn to Q88/Q98 page
A Remove front hitch arms when using loader H Fendt CANbus harness required on tier 3 version tractors for 3rd/4th service. 0074.020.208.000
B State if tractor is equipped with air tank (for hose kit) J Will only mount to Profi, Profi Plus models M Order 14326171 kit with Special Hose Kit if tractor has 4 hyd outlets below grille (extra cost)
C Use counterweight in combination with Q51 or Q56 K 2 front spools required with hose set N The Easy/ElectroDrive will not fit tractors without rear LS & P-connection.
F Hose kit adapted to mount to Fendt mullti coupler. L Power beyond required with ElectroDrive
* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.
* For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200
17
Type NON-PARALLEL PARALLEL Prices - £ Sterling
Hydraulic
Option
Subframe
Model Q31 Q33 Q41 Q51 Q36 Q38 Q46 Q48 Q49 Q56 Q66 Q76
Std Equip' → Euro tool carrier c/w clic on, 3rd service
Max front
Tractor model NB wheel ↓ 3,870 4,170 4,370 5,070 5,120 5,420 5,620 5,920 6,120 6,320 7,120 7,720 Std Opt
Fiat
55-90, 60-90 and 65-90 X 11,2 x 24 6,540 Also check out the Versa-X range 7,790 Also check out the Versa-X range S OC
60-66, 65-66, 70-66 and 80-66 X 6,540 Also check out the Versa-X range 7,790 Also check out the Versa-X range SX OC
F 100, 110, 115, 120, 130 and 140 14,9 x 28 7,740 8,990 SX OC
Ford
3430, 3930, 4130 X Use the Versa-X range Use the Versa-X range S OC
4610 4wd X 6,540 Also check out the Versa-X range 7,790 SX OC
4630, 4830, 5030 X 12,2 x 24 Use the Versa-X range Use the Versa-X range SX OC
5000, 6600, 5110, 5610, 6410, 6610 4wd X 6,540 7,040 7,790 8,290 SX OC
6710, 7000, 7410, 7600 X 13,6 x 28 7,040 7,740 7,790 8,290 8,990 SX OC
* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.
* For Euro-Combi tool carrier 8 + 3 and 8 + 5 add £200
18
Type NON-PARALLEL PARALLEL Prices - £ Sterling
Width DM DM
JCB
Hydraulic
Option
Subframe
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78
Std Equip' → Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only) Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)
Max front
Tractor model NB wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std Opt
Fastrac 4160, 4190 and 4220 A, B, C 540/65 R34 10,590 10,890 11,190 DM E EY
19
Type NON-PARALLEL PARALLEL Prices - £ Sterling
John Width DM DM
Hydraulic
Option
Subframe
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78
Deere Std Equip' →
Max front
Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only) Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)
Tractor model NB wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std Opt
3200, 3210, 3300, 3310, 3400, 3410 7,040 7,240 7,990 8,290 8,390 8,490 8,790 8,990 DMX OC
5215, 5315 D 320/70 R24 Use the Versa-X range Use the Versa-X range DM OC
5415, 5515 D 320/70 R24 6,540 Also check out the Versa-X range 7,790 8,190 DM OC
5620, 5720, 5820 C, F 440/65 R24 7,040 7,740 7,790 8,090 8,190 8,290 8,590 8,790 8,990 DM LS
5055E, 5065E, 5075E A 320/85 R24 6,540 Also check out the Versa-X range 7,790 Also check out the Versa-X range DM LS
5070M, 5080M, 5090M, 5100M C, F 440/65 R24 7,040 7,740 7,790 8,090 8,190 8,290 8,590 8,790 8,990 DM oc
5075M, 5085M, 5100M, 5115M (US built) 380/85 R24 6,540 7,040 7,790 8,090 8,190 8,290 8,790 DM oc
5080R, 5090R, 5100R C, F 440/65 R24 7,040 7,740 7,790 8,090 8,190 8,290 8,590 8,790 8,990 DM LS
6010, 6100, 6110, 6200, 6210, B 14,9 x 24 7,040 7,740 8,290 8,590 8,790 8,990 9,290 DM LS
6300, 6310, 6400, 6410 B 14,9 x 24 7,040 7,740 8,540 8,290 8,590 8,790 8,990 9,290 9,790 DM LS
6500, 6510, 6600, 6610, 6800, 6810, 6900, 6910 540/65 R28 8,540 9,790 10,090 10,390 DM LS
20
Type NON-PARALLEL PARALLEL Prices - £ Sterling
John Width DM DM
Hydraulic
Option
Subframe
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78
Deere Std Equip' →
Max front
Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only) Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)
Tractor model NB wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std Opt
6120, 6215, 6220 A, B, C 540/65 R24 7,040 7,740 8,290 8,590 8,790 8,990 9,290 9,790 DM LS HK
A, B,C,
6320, 6415, 6420, H
540/65 R24 7,040 7,740 8,540 8,290 8,590 8,790 8,990 9,290 9,790 DM LS HK
6520, 6520, 6615, 6620, 6620, 6820, 6920 TLS C, H 540/65 R28 8,540 9,790 10,090 10,390 DM LS HK
B, C, E,
6130, 6230, 6330, 6430 G, H
16.9 R24 7,040 7,740 8,540 8,290 8,590 8,790 8,990 9,290 9,790 DM LS HK
C, E,
6530, 6534, 6630 G, H
420/70 R28 8,540 9,790 10,090 10,390 DM LS HK
C, E,
6830, 6930 TLS G, H
16.9 R28 8,540 9,790 10,090 10,390 DM LS HK
6090MC, 6100MC, 6110MC B 480/65 R28 7,740 8,540 8,290 8,590 8,790 8,990 9,290 9,790 DM LS
6090RC, 6100RC, 6110RC B 480/65 R28 7,740 8,540 8,290 8,590 8,790 8,990 9,290 9,790 DM LS
6105, 6115, 6125M and R B, H, J 480/65 R28 7,740 8,540 8,290 8,590 8,790 8,990 9,290 9,790 DM LS HK
6130, 6140, 6150M and R (medium) H, J, M 540/65 R28 8,540 9,790 10,090 10,390 DM LS E
6110, 6120, 6130M and R T4F B, H, J 480/65 R28 7,740 8,540 8,290 8,590 8,790 8,990 9,290 9,790 DM LS HK
6135M, 6145, 6155M and R T4F (medium) H, J 540/65 R28 8,540 9,790 10,090 10,390 DM LS EY
7200, 7210, 7300, 7310, 7400, 7410, 7500, 7510 540/65 R28 8,540 9,790 10,090 10,390 10,690 DM LS
7600, 7610, 7700, 7710, 7800, 7810 540/65 R30 10,390 10,690 DM LS
7220, 7320, 7420, 7520 C 540/65 R28 9,790 10,090 10,390 10,690 DM LS HK
7730, 7830, 7930 and 7R and 8R 600/70 R30 Turn to Q88 / Q98 page
A Power beyond plate maybe required G Non Premium tractors must be equipped with power beyond plate (order John Deere plate AL171838)
B Q46 or Q48 may require extended bearing boxes depending on tyre size. H ErgoDrive will not fit if tractor has a Command Armrest. Use ElectroDrive
C Additional drawbar bracket kit 10386279 maybe required (extra cost) J State it tractor is fitted with or without a front linkage.
E If transfering hyd set from 6020 to 6030, an inline check valve is required (extra cost) M Q61 will not fit with La Forge front linkage
* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.
* For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200
21
Type NON-PARALLEL PARALLEL Prices - £ Sterling
Width DM DM
Kubota
Hydraulic
Option
Subframe
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78
Std Equip' → Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only) Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)
Max front
Tractor model NB wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std Opt
ME 5700 C 360/70 R20 Use the Versa-X range Use the Versa-X range DM OC
M 5040, 6040, 7040 320/85 R20 Use the Versa-X range Use the Versa-X range DM OC
E, F
M7131, M7151, M7171 G, H
540/65R28 8,540 8,990 9,290 9,790 DM OC
A Pressure reducing 10377217 kit req'd E Confirm hydraulic pump type
B Subframe available for 2wd tractors F ErgoDrive will not fit tractors with large armrest, use Easy/ElectrDrive
C Counterweight must be used with Q31 loader G If tractor is not equipped with loader ready mounts, order additional kit 60011324.
D Hydraulic kit designed for tractors without trailer brake valve H If tractor is loader ready, order special hydraulic set 60012835 instead of std valve option (L/S only)
* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.
* For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200
22
Remember to choose from our
range of quality implements
Multipurpose 4 in 1 Bucket
H Series Bucket
Silocut SG
Silograb
Flexigrip
Width DM DM
Landini
Hydraulic
Option
Subframe
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78
Std Equip' → Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only) Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)
Max front
Tractor model NB wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std Opt
Alpine 65, 70, 75, 80 , 85 Std D 320/85 R20 6,540 Also check out the Versa-X range 7,790 8,190 DM OC
Landpower 125, 135, 145 420/70 R28 8,740 9,990 10,290 10,590 10,890 DMX OC
Landpower 145 Tier 3 420/70 R28 8,740 9,990 10,290 10,590 10,890 DMX OC
Legend 115, 120, 125, 130, 135 NG 8,740 9,990 10,290 10,590 10,890 DMX OC
Legend 140, 145, 160, 165, 180, 185 NG 8,740 9,990 10,290 10,590 10,890 DMX OC
Mythos 90, 100, 105 14.9 R24 7,240 7,940 8,490 8,790 8,990 9,190 DMX OC
Power Farm 60 C Use the Versa-X range Use the Versa-X range DM OC
Power Farm 75, 80, 85, 90, 95, 100, 105, 110 C 12.4 R24 6,540 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office. For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200
24
Type NON-PARALLEL PARALLEL Prices - £ Sterling
Width DM DM
Landini
Hydraulic
Option
Subframe
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78
Std Equip' → Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only) Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)
Max front
Tractor model NB wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std Opt
Powermondial 100, 110, 115, 120 480/65 R24 7,940 8,740 9,190 9,490 9,990 DMX OC
Rex 75, 85, 95, 105 F/GE/GT Use the Versa-X range Use the Versa-X range DSX OC
Technofarm 60, 70, 80 D 300/70 R20 Use the Versa-X range Use the Versa-X range DM OC
Technofarm 75, 85 Tier 2, 80 Tier 3 D 300/70 R20 6,540 Also check out the Versa-X range 7,790 8,190 DM OC
Vision 80, 85 6,740 7,040 7,240 7,940 7,990 8,290 8,390 8,490 8,790 8,990 9,190 DMX OC
Vision 90, 100, 95, 105 7,240 7,940 8,490 8,790 8,990 9,190 DMX OC
4-60, 4-70, 4-75, 4-80 405/70 R20 6,540 Also check out the Versa-X range 7,790 Also check out the Versa-X range DM OC
5H 80, 5H 90, 5H100, 5H 110, 5H 115 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
5-090 H, 5-100H, 5-110H, 5.115H + new cab 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
6-120C, 6-130C, 6.140C 480/65 R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC LS
6-145L, 6-160L, 6-175L 480/85 R28 7,040 7,740 8,290 8,590 8,790 8,990 DM OC LS
6-145, 6-160, 6-175 480/65 R24 7,740 8,540 8,990 9,290 9,790 DM OC LS
7-145, 7-165, 7-180, 7-185, 7-195, 7-205 540/65 R28 8,540 9,790 10,090 10,390 DM LS
* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office. For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200
25
Type NON-PARALLEL PARALLEL Prices - £ Sterling
Massey Width DM DM
Hydraulic
Option
Subframe
Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78
Ferguson Model
Std Equip' → Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only) Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)
Max front
Tractor model NB wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std Opt
3050, 3065, 6110 - 6140 14.9 R24 6,740 7,040 7,240 7,990 8,290 8,390 8,490 8,990 DMX OC
3050, 3065, 6110 - 6140 Steepnose 14.9 R24 6,740 7,040 7,240 7,990 8,290 8,390 8,490 8,990 DMX OC
6160, 6170, 6180 14.9 R28 7,940 8,740 9,190 9,490 9,990 DMX LS OC
2430, 2435, 2440 E 320/85 R20 6,540 Also check out the Versa-X range 7,790 8,190 DM OC
410, 420, 430 280/70 R20 Use the Versa-X range Use the Versa-X range DM OC
3615 Utility, 3625, 3635, 3645 Utility/A-series P Use the Versa-X range Use the Versa-X range DM OC
3630 A, 3640 A and 3650 A F 12.4 R24 Use the Versa-X range Use the Versa-X range DM OC
3625, 3635, 3640, 3645, 3650, 3655 and 3660 model Q 320/70 R20 Use the Versa-X range Use the Versa-X range DM OC
F/S
4225, 4235, 4245, 4255 420/70 R24 7,240 7,940 8,490 8,790 8,990 9,190 DMX OC
4260, 4270 13,6 R28 7,940 8,740 9,190 9,490 9,990 DMX OC
4325, 4335, 4345, 4355, 4365 420/70 R24 7,240 7,940 8,490 8,790 8,990 9,190 DMX OC
4360, 4370 13,6 R28 7,940 8,740 9,190 9,490 9,990 DMX OC
4435, 4445, 4455 E, G 480/65 R28 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
5425, 5425, 5435 + Steepnose A, J 14,9 x 28 6,740 7,040 7,240 7,940 7,990 8,290 8,390 8,490 8,790 8,990 DMX OC LS
5445, 5455, 5460 + Steepnose A, H 14,9 x 28 7,240 7,940 8,490 8,790 8,990 9,190 DMX OC LS
5465 (T3) A, H 480/65 R28 7,940 8,740 9,190 9,490 9,990 10,290 10,590 DMX LS OC
5460 Sisu, 5465,(T2), 5470 (T2, T3), 5480 (T3) A, H 480/65 R28 7,940 8,740 9,190 9,490 9,990 DMX LS OC
5475 (T3) A, H 16.9 R28 8,740 9,990 10,290 10,590 10,890 DMX LS OC
5410, 5420, 5430 7,240 7,940 7,990 8,290 8,390 8,490 8,790 8,990 9,190 DMX OC
5608, 5609 M 7,240 7,940 7,990 8,290 8,390 8,490 8,790 8,990 9,190 DMX OC
5611, 5612, 5613 M, R 7,240 7,940 8,490 8,790 8,990 9,190 DMX OC EY
A Lift arms on front hitch must be removed when using loader J Note maximum wheel size Q Subframe adapted for tractors produced after 2008 (T35019)
E DMX subframe priced as DM M Check cab - Essential, Exclusif, Efficient for hyd type R If tractor has original front linkage, order 14326575.
G Q36/Q38 must have extended bearing boxes. N ErgoDrive not available Exclusif and Efficient cab
H Check transmission type P Subframe will not fit with underslung exhaust X US subframe - NOT DM Lock & Go
* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office. For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200
26
Type NON-PARALLEL PARALLEL Prices - £ Sterling
Massey Width DM DM
Hydraulic
Option
Subframe
Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78
Ferguson Model
Std Equip' → Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only) Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)
Max front
Tractor model NB wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std Opt
6235, 6245, 6255, 6255, 6265 + Steepnose 540/65 R28 7,240 7,940 8,490 8,790 8,990 9,190 DMX OC LS
6260, 6270, 6280 540/65 R28 7,940 8,740 9,190 9,490 9,990 DMX OC LS
6445, 6455 + Steepnose A, B, C 14,9 x 28 7,240 7,940 8,490 8,790 8,990 9,190 DMX LS OC
6460, 6470 T2 A, B, C 14,9 x 28 7,240 7,940 8,490 8,790 8,990 9,190 DMX LS OC
6460, 6470 Dyna 6 T3 Sisu B, K, L 380/85 R28 7,940 8,740 9,190 9,490 9,990 DMX LS OC
A, B
6465, 6475, 6480 2.5T C, D
480/65 R28 7,940 8,740 9,190 9,490 9,990 10,290 10,590 DMX LS OC
6465, 6475, 6480 Dyna 6 T3 Sisu B 14,9 x 28 8,740 9,990 10,290 10,590 DMX LS OC
6475, 6480 A, B, C 480/65 R28 8,740 9,990 10,290 10,590 10,890 DMX LS OC
6612, 6613, 6615 Dyna 4 Essential 14,9 x 28 7,940 8,740 9,190 9,490 9,990 DMX OC LS
6613 Dyna 6, 6614, 6615, 6616 Dyna 6 + VT M 14,9 x 28 8,440 9,240 9,690 9,990 10,490 DMX EY
7465, 7475, 7480 A, B, D 480/65 R28 8,740 9,990 10,290 10,590 DMX LS OC
7614, 7615 Dyna 4, 7615, 7916, 7618 Dyna 6 + VT M 16.9 R28 10,490 10,790 11,090 DMX EY E
7619, 7620, 7622 Dyna 6 and Dyna-VT M 16.9 R28 11,090 11,390 DMX EY E
7624, 7624 Dyna-VT, 7626 Dyna 6 M 600/65 R28 11,090 11,390 DMX EY E
27
Type NON-PARALLEL PARALLEL Prices - £ Sterling
Width DM DM
McCormick
Hydraulic
Option
Subframe
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78
Std Equip' → Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only) Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)
Max front
Tractor model NB wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std Opt
C-Max 75, 80, 85, 90, 95, 100, 105, 110 D 12.4 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
CX70, CX75, CX80, CX85 D 6,540 6,840 7,040 7,790 8,190 8,290 8,590 8,790 DM OC
CX90, CX95, CX100, CX105 D 6,540 6,840 7,040 7,740 7,790 8,090 8,190 8,290 8,590 8,790 8,990 DM OC
CX90, CX 100, CX110 T3 D, H 6,540 6,840 7,040 7,740 7,790 8,090 8,190 8,290 8,590 8,790 8,990 DM OC
F 80, F 75, F85 - F/GE/XL 6,540 Also check out the Versa-X range Also check out the Versa-X range DSX OC
F 90, F 100, F 95, F105 - F/GE/XL 6,540 Also check out the Versa-X range Also check out the Versa-X range DSX OC
A, B
MC80, MC90, MC95, MC100, MC105 C, E 7,040 7,740 8,290 8,590 8,790 8,990 DM LS
B
MC105, MC110 Tier 3 C, E
14.9 R28 7,740 8,990 9,290 DM LS
B
MC115 and MC130 Tier 3 C, E
14.9 R28 7,740 8,990 9,290 DM LS
A, B
MC 120 Power 6 C, E, G
540/65 R28 8,540 8,990 9,290 9,790 10,090 10,390 DM LS
A, B
MC 135 Power 6 C, E, G
540/65 R28 8,540 9,790 10,090 10,390 DM LS
MTX 110, MTX 125, MTX 140 A, B, C 540/65 R28 8,540 9,790 10,090 10,390 10,690 DM LS
MTX 120, MTX 135, MTX 150 Tier 2 B, C 540/65 R28 8,540 9,790 10,090 10,390 10,690 DM LS
MTX 120, MTX 135, MTX 145, MTX 150 Tier 3 B, K 540/65 R28 8,540 9,790 10,090 10,390 10,690 DM LS
MTX 155, MTX 175, MTX 200 A, B, C 540/65 R28 10,390 10,690 DM LS
28
Type NON-PARALLEL PARALLEL Prices - £ Sterling
Width DM DM
McCormick
Hydraulic
Option
Subframe
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78
Std Equip' → Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only) Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)
Max front
Tractor model NB wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std Opt
T-Max 80, 90, 100,110, 115 380/70 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
X4-20, X4-30, X4-35, X4-40 405/70 R20 6,540 Also check out the Versa-X range 7,790 Also check out the Versa-X range DM OC
X4.50, X4.60, X4.70 L 340/85 R24 6,540 Also check out the Versa-X range 7,790 8,190 DM OC
X5.20, X5.30, X5.40, X5.50 480/65 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC LS
X6.420, X6.430 480/65 R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC LS
X6.460, X6.470, X6.480 (X6L) 480/85 R28 7,040 7,740 8,290 8,590 8,790 8,990 DM OC LS
X7,440, X7.450, X7.460 540/65 R28 7,740 8,540 8,990 9,290 9,790 DM LS
X50.20, X50.30, X50.40. X50.50 D 380/70 R24 6,540 6,840 7,040 7,790 8,090 8,290 8,790 DM OC
X50.20M, X50.30M, X50.40M D 380/70 R24 6,540 6,840 7,040 7,790 8,090 8,290 8,790 DM OC
X60.20, X60.30, X60.40, X60.50 J 480/65 R24 6,540 6,840 7,040 7,790 8,090 8,290 8,790 DM OC
29
Type NON-PARALLEL PARALLEL Prices - £ Sterling
Width DM DM
New Holland
Hydraulic
Option
Subframe
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78
Std Equip' → Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only) Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)
Max front
Tractor model NB wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std Opt
T4020, T4030, T4040, T4050 Super steer A, G 11.2 x 24 6,540 Also check out the Versa-X range 7,790 8,190 DM OC
TD4020F, TD4030F, TD4040F 280/70 R16 Use the Versa-X range Use the Versa-X range DM OC
T5030, T5040, T5050, T5060, T5070 A 540/65 x R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
TD5010, TD5020, TD5030 A 540/65 x R24 6,540 Also check out the Versa-X range 7,790 8,190 DM OC
TD5040, TD5050 A 540/65 x R24 6,840 7,040 7,740 8,290 8,590 8,790 DM OC
T6010, T6020 Plus/Delta, T6040 Elite C 480/65 R28 7,040 7,740 8,290 8,590 8,790 8,990 DM LS OC
T6010, T6020 Plus/Delta, T6040 Elite, Super Steer E, F 480/65 R28 8,990 DM LS
T6030, T6050 Plus/Delta, T6070 Plus C 480/65 R28 7,740 8,540 8,990 9,290 9,790 DM LS OC
T6050, T6070, T6080, T6090 RC & PC L 540/65 R28 9,040 10,290 10,590 10,890 DM EY HK
T7040, T7050, T7060, T7070 + Super Steer L 600/65 R28 10,890 11,190 DM EY HK
T4.55, T4.65, T4.75 N, S 280/85 R24 6,540 Also check out the Versa-X range 7,790 8,190 DM OC
N, P, R,
T4.75, T4.85, T4.95, T4.105, T4.115 S
14,9 x 24 6,540 6,840 7,790 8,190 DM OC
T5.95, T5.105, T5.115 & Electro Command A 480/65 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
TD5.65, TD5.75 A 11.2 R24 6,540 Also check out the Versa-X range 7,790 Also check out the Versa-X range DM OC
TD5.75, TD5.90 TD5.100, TD5.110 Tier 3 A 340/85 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
TD5.85, TD5.95, TD5.105, TD5.115 Tier 4A A 340/85 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
T6.120, T6.140, T6.150, T6.160 + Auto Command 480/65 R28 7,040 7,740 8,290 8,590 8,790 8,990 DM LS OC
T6.145, T6.155, T6.165, T6.175 Tier 4B 540/65 R28 7,740 8,540 8,990 9,290 9,790 DM LS OC
T7.175, T7.190, T7.210, T7.225 Tier 4B T, U 600/65 R28 9,040 10,290 10,590 10,890 DM EY HK
T7.230, T7.245, T7.260 and T7.270 Tier4B T, U 600/65 R28 10,890 11,190 DM EY E
T7.235, T7.250, T7.260, T7.270 + Super Steer T 600/65 R28 10,890 11,190 DM EY HK
A DMX subframe priced as DM L Tractor must be ordered with factory fitted mid-mount valve for hose kit. S Serial Number of tractor required
B Q66, Q68 must have extended bearing boxes. M HK requires loader interface prep CNH 8110-330489 or special HK with front hitch T Order loader ready harness from CNH harness #84167030 and 2 relays #82017871.
C Additional kit 10377122 req'd for axle suspension N Subframe will fit with Folger front linkage U Hydraulic sets do not fit tractors with mid-mount valve. Use standard hose set
F Q56, Q58 must have extended bearing boxes. P State if front axle support is cast or welded.
G Q36 must have extended bearing boxes for Super steer. R Subframe designed for tier 3 tractors For Euro-CFor Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200
30
Type NON-PARALLEL PARALLEL Prices - £ Sterling
Width DM DM
New Holland
Hydraulic
Option
Subframe
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78
Std Equip' → Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only) Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)
Max front
Tractor model NB wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std Opt
TD 55D, TD60D, TD65D, TD70D A 11,2 x 24 6,540 Also check out the Versa-X range 7,790 8,190 DM OC
TD 75D, TD 80D, TD 85D, TD 90D A 13,6 x 24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 DM OC
TL 70, TL 80, TL 90, TL 100 and TLA A 540/65 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
TM115, 120, 125, 130, 135, 140, 150, 155 D 540/65 R28 8,740 9,990 10,290 10,590 DMX LS OC
TM115, 120, 125, 130 Super Steer B 540/65 R28 9,990 10,290 10,590 DMX LS
TM135, 140, 150, 155, 165 Super Steer B 540/65 R28 9,990 10,290 10,590 10,890 DMX LS
TN 55A, TN 65A, TN 75A (and TN models) A 320/70 R24 Use the Versa-X range Use the Versa-X range DM OC
TN 55, 65, 75D & TN 60, 70, 75A, 85, 95DA A, J 320/70 R24 6,540 Also check out the Versa-X range 7,790 8,190 DM OC
TN 65F, 75F, 90F, TN 75FA, 85FA, 95FA 380/70R20 6,540 Also check out the Versa-X range 7,790 Also check out the Versa-X range DS OC
TN 55, 60, 65, 70, 75, 85SA (& TNS models) A, G, K 320/70 R24 7,040 7,790 8,090 8,190 DM OC
TS 90, TS 100, TS 110 420/70 R24 7,240 7,940 8,490 8,990 9,190 DMX LS
TS 100A, TS 110A C 480/65 R28 7,040 7,740 8,290 8,590 8,790 8,990 DM LS OC
TS 115A, TS 125A, TS 135A C 480/65 R28 7,740 8,540 8,990 9,290 9,790 DM LS OC
TVT 135, TVT 155, TVT 145 T3 B 480/70 R30 9,990 10,290 10,590 10,890 DMX LS
TVT 170, TVT 190, TVT 195 T3 480/70 R30 10,590 10,890 DMX LS
5640, 6640, 6840, 7740 7,240 7,940 8,490 8,990 9,190 DMX LS OC
8160, 8260, 8360, M 100, M115, M 135 D, H 420/70R28 8,740 9,990 10,290 10,590 10,890 DMX LS OC
Width DM DM
Same
Hydraulic
Option
Subframe
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78
Std Equip' → Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only) Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)
Max front
Tractor model NB wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std Opt
Dorado 56, 66 G 360/70 R20 6,540 Also check out the Versa-X range 7,790 Also check out the Versa-X range DSX OC
Dorado 76, 85, 86 G 320/70 R24 6,540 Also check out the Versa-X range 7,790 Also check out the Versa-X range DSX OC
Dorado 3 60, 80, 90, 100 6,540 Also check out the Versa-X range 7,790 8,190 DM OC
Dorrado 80, 90 Classic T4i P, U 360/70 R20 6,540 Also check out the Versa-X range 7,790 Also check out the Versa-X range DM LS EY
Dorado 90.4, 90.4 Classic and 100.4 T4i P, U 360/70 R20 6,540 Also check out the Versa-X range 7,790 Also check out the Versa-X range DM LS EY
Explorer 70 II, 75, 80 II, 90 II, 95 and Classic D 420/85 R24 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
Explorer 85, 95 D 380/85 R24 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
Explorer 3 85, 100, 110 D, J 380/85 R24 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
Explorer 3 90, 105 D 420/70 R24 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
Explorer 90.4, 105.4, 115.4 Tier 4 H 560/85 R28 7,040 7,790 8,090 8,290 8,790 DM LS EY
P, R, S
Fortis 120.4, 130.4, 140.4, 150.4, 160.4 T
540/65 R24 7,040 7,740 8,290 ` 8,790 8,990 9,290 DM LS
Fortis 120.4, 130.4, 140.4, 150.4, 160.4 Infinity and
Continuo
E, P, T 540/65 R24 7,540 8,240 8,790 9,090 9,290 9,490 9,790 DM EY HK
Fortis 150, 160, L 150 and L 160 J 540/65 R28 7,740 8,540 8,990 9,290 9,790 DM LS EY
Fortis 150, 160 Hi-Line, L 160 Continuo E 540/65 R28 8,240 9,040 9,490 9,790 10,290 DM EY E
Fortis 180, 190 Hi-Line, 180, 190 Continuo E 540/65 R28 9,040 10,290 10,590 10,890 DM EY E
Iron 100, 110, 120, 125 (4 cyl) H 7,040 7,740 8,290 8,590 8,790 8,990 DM LS OC
Iron 115, 125, 135, 155 F,H, M 540/65 R34 8,240 9,040 8,790 9,090 9,290 9,490 9,790 10,290 DM EY OC
D Q36, Q38 must be equippied with extended bearing boxes P Order accumulator kit 5034083 with EasyElectroDrive (extra cost)
E ErgoDrive not available R Tractors w/o power beyond, order shuttle valve for LS signal. Order from SDF. Ref no: 2.3729.686.0
H ElectroDrive or Deluxe hose kit only on Continuo/Hiline L/S verion S State pump flow rate
J DMX subframe priced as DM T If Sauter front hitch fitted, order kit 10418625 at £150
M If Sauter front hitch fitted, order kit 10418133 at £150 U Subframe not adapted for under slung (horizontal) exhaust pipe.
* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office. For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200
32
Type NON-PARALLEL PARALLEL Prices - £ Sterling
Width DM DM
Same
Hydraulic
Option
Subframe
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78
Std Equip' → Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only) Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)
Max front
Tractor model NB wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std Opt
Iron 130S, 140S, 150S, 150.7, 165S, 165.7 M 9,790 10,090 10,390 10,690 DM LS
Iron 150, 170, 175 and Continuo H 8,540 9,790 10,090 10,390 10,690 DM LS EY
Laser 140, 160 N 480/70 R28 7,740 8,540 8,990 9,290 9,790 DM OC
Silver 100.4 420/85 R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC
Silver 80, 85, 95, 110-4 cyl 420/85 R24 7,240 7,940 8,490 8,790 8,990 9,190 DMX OC
Silver3 100, 110 and Continuo P, D 420/85 R24 7,240 7,940 7,990 8,290 8,390 8,490 8,990 DMX OC
Silver 105 6 cyl F 420/85 R24 7,940 8,490 8,790 8,990 9,190 DMX OC
Silver 110 6, 115 B 480/70 R28 8,740 9,990 10,290 10,590 DMX OC
Virtus J 90, 100, 110, 120 P, Q 560/85 R28 7,040 7,740 8,290 8,590 8,990 DM OC
Virtus 100, 110, 120, 130 Basic, Infinity P, Q 560/85 R28 7,040 7,740 8,290 8,590 8,990 DM LS OC
A Adapted for engine type BF6M1013EC F Q46/Q48 must be equippied with extended b/boxes Q Order kit 5034301 for tractors with original front hitch.
B Subframe will fill fit with or w/o original front hitch H ElectroDrive or Deluxe hose kit only on Continuo/Hiline L/S verion
C Adapted for engine type BF6M2012C M If Sauter front hitch fitted, order kit 10418133 at £150
D Q36, Q38 must be equippied with extended bearing boxes N Dynamic mudguards only
E ErgoDrive not available P Order accumulator kit 5034083 with EasyElectroDrive (extra cost)
* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office. For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200
33
Type NON-PARALLEL PARALLEL Prices - £ Sterling
Width DM DM
Valtra
Hydraulic
Option
Subframe
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78
Std Equip' → Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only) Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)
Max front
Tractor model NB wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std Opt
600 - 900 480/65 R24 6,540 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
6200, 6300, 6400 A, E 480/65 R28 7,240 7,940 8,490 8,790 8,990 9,190 DMX OC
6250, 6350, 6550, 6650, 6750, 6850 A, E 480/65 R28 7,240 7,940 8,490 8,790 8,990 9,190 DMX OC
6250, 6350, 6550, 6650, 6750, 6850 A, C, D 480/65 R28 7,940 9,190 DMX OC
8050, 8350, 8450, 8550, 8750, 8950 M, E 540/65 R28 8,740 9,990 10,290 10,590 10,890 DMX OC
8050, 8350, 8450, 8550, 8750, 8950 M, C 540/65 R28 10,590 10,890 DMX OC
M 120, M130, M150 E 540/65 R28 7,940 8,740 9,190 9,490 9,990 DMX LS
A Kit 10347271 required for old type axle before S/N K36108 - Additional cost. E Subframe will fit all options except Zuidberg front hitch
B Subframe will fit with or w/o original front hitch G Q36, Q38 Loader must be ordered with long b/boxes
C Subframe will fit with original Zuidberg front hitch H DMX subframe priced as DM
D Q56, Q58 Loader must be ordered with long bearing boxes M Kit 14321621 required for old type axle before S/N K36108 - Additional cost.
* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.
* For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200
34
Type NON-PARALLEL PARALLEL Prices - £ Sterling
Width DM DM
Valtra
Hydraulic
Option
Subframe
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78
Std Equip' → Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only) Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)
Max front
Tractor model NB wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std Opt
N 91, N101, N111, N121 e and Advance J, L 16.9 x 28 7,740 8,540 8,290 8,590 8,790 8,990 9,290 9,790 DM OC HK
N 122 Direct/Versu B, J 16.9 x 28 7,740 8,540 8,290 8,590 8,790 8,990 9,290 9,790 DM LS
N 93 (H3), N103 HiTech (H3 & H5) B, G 540/65 R28 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
N103.4, N113, N123, N143 HiTech (H3 & H5) B 540/65 R28 7,740 8,540 8,990 9,290 9,790 DM OC
N143, N163 Direct/Versu B 540/65 R28 7,740 8,540 8,990 9,290 9,790 DM LS HK
N104, N114e, N124 HiTech B, J, N 540/65 R28 7,740 8,290 8,590 8,790 8,990 DM LS
N134, N154e, N174 HiTech B, J, N 540/65 R28 7,740 8,540 8,990 9,290 9,790 DM OC HK
N134, N154e, N174 Active, Direct, Versu B, N 540/65 R28 8,240 9,040 9,490 9,790 10,290 DM EY HK
S 232, S 262, S 292, S 322, S 352 16.9 x R34 Turn to Q88/Q98 page
T 120 - T 190 E 540/65 R30 8,740 9,990 10,290 10,590 10,890 DMX LS
T 120c - T 190c E 540/65 R30 8,740 9,990 10,290 10,590 10,890 DMX OC
T 121 - T 171 Classic, T 121 - T 191 HiTech 8,740 9,990 10,290 10,590 10,890 DMX OC HK
T 151e - T 191 Advance L 460/85 R30 8,740 9,990 10,290 10,590 10,890 DMX LS HK
T 132 T 152 T 153 T 162 T 163 Direct/Versu K 540/65 R30 8,740 9,990 10,290 10,590 10,890 DMX LS
T 133 T 153 T 173 T 193 HiTech K 540/65 R30 8,740 9,990 10,290 10,590 10,890 DMX LS
T153, T163, T172, T182, T183, T202, T203, T213
540/65 R30 10,590 10,890 DMX LS
Direct/Versu
B, K,
T144, T154, T174e, T194, T214, T234 M, N
540/65 R30 10,290 10,590 10,890 DM EY
B Subframe will fit with or w/o original front hitch J Q46, Q48 Loader must be ordered with long bearing boxes N Hydraulic sets do NOT fit tractors with mid mounted tractor valve.
C Subframe will fit with original Zuidberg front hitch K Q66, Q68 Loader must be ordered with long bearing boxes c/w original front hitch
E Subframe will fit all options except Zuidberg front hitch L Hose kits available for Advance models P Order check valve 36722200 from Agco in combination with hydraulic sets.
G Q31, Q33, Q36, Q38 Loader must be ordered with long bearing boxes M Q66 is not recommended for T214 and T234.
* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.
* For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200
35
Make life easier;
add these options to your loader
Multicoupler MC4 £295
Width DM DM
Zetor
Hydraulic
Option
Subframe
Model Q31 Q33 Q41 Q51 Q61 Q36 Q38 Q39 Q46 Q48 Q49 Q56 Q58 Q66 Q68 Q76 Q78
Std Equip' → Euro T/C c/w clic on, 3rd service & Lock & Go (Delta only) Euro tool carrier c/w clic on, 3rd service, Electric Softdrive and Lock & Go (Delta only)
Max front
Tractor model NB wheel ↓ 3,870 4,170 4,370 5,070 5,870 5,120 5,420 5,520 5,620 5,920 6,120 6,320 6,620 7,120 7,420 7,720 8,020 Std Opt
4320, 4340, 5320, 5340, 6340, 7340 X 6,540 7,040 7,790 8,290 SX OC
Proxima 6441, 7441, 8441, 9441 A, E 340/85 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 DM OC
Proxima 65, 75, 85, 95 A 340/85 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 DM OC
Proxima 70, 80, 90, 100 6,540 6,840 7,040 7,790 8,090 8,190 8,290 DM OC
Proxima Plus 8541, 9541, 10541 A, E 340/85 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
Proxima Plus 85, 95, 105 A 340/85 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
Proxima Plus 90, 100, 110 A 340/85 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
Proxima Power 85, 90, 95, 100, 105, 110, 115, 120 G, H 340/85 R24 6,840 7,040 7,790 8,090 8,190 8,290 8,790 DM OC
Forterra 8641, 9641 A, B, D 380/85 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,590 8,790 DM OC
Forterra 10441, 11441 A, B, D 380/85 R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC
A, B
Forterra 12441 D, F
380/85 R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC
Forterra 95, 105 A, D 380/85 R24 6,540 6,840 7,040 7,790 8,090 8,190 8,290 8,590 8,790 DM OC
Forterra 115, 125 A, D 380/85 R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC
Forterra 100, 110 A, D 380/85 R24 6,540 6,840 7,040 8,290 8,590 8,790 DM OC
Forterra 120, 130, 140 A, D 380/85 R24 7,040 7,740 8,290 8,590 8,790 8,990 DM OC
A DMX subframe priced as DM F 4 Cylinder only K Subframe will fit with and without front axle suspension
B Check if tractor has metal or plastic bonnet G Adapted for tractors with 175L or 190L fuel tank X US subframe - NOT DM Lock & Go
D Subframe will not fit with front linkage H Order Q36, Q38 with long bearing boxes in combination with f Z UM subframe - NOT DM Lock & Go
E Check date tractor was manufactured J Subframe will fit with and without front hitch
* For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.
* For Euro-Combi tool carrier 8 + 3, 8 + 5 and 8+MX, Euro/Faucheux (DM width only)add £200
36
Type PARALLEL Prices - £ Sterling
Width DL DXL
Hydraulic
Subframe
Option
Model
Q88 Q98
Std Equip' → Euro t/c c/w clic on, 3rd service, Electric Softdrive and Lock & Go
Max front
9,920 10,920
Case IH
MAGNUM 7100, 7200 series 16.9 x 30 13,290 DL LS
MAGNUM MX 210 - 335, MAGNUM 180, 190, 210 and 225 Tier 4 B 600/65 R30 13,290 DL LS
MAGNUM 235, 260, 290, 315, 340 Tier 4 B 600/65 R30 14,990 DXL EY
PUMA 180, 195, 210, 215, 225, 230 + CVX + Multicontroller A 600/65 R28 13,490 DL HK
U
Claas
Axion 810, 830, 840, 850 C-Matic and Hexashift Tier 4 U 600/70 R28 17,495 SP2 EY
ErgoDrive will not fit if tractor has a Command Armrest. Use ElectroDrive
Deutz, Same
Deutz Agtrotron TTV 630, TTV7000, Same Iron 190. Same X210, X230, X250 Continuo C 600/7 R30 13,790 DL EY
Deluxe hose set will not fit to tractors with air brakes
819 Vario, 822 Vario, 824 Vario, 826 Vario and 828 Vario D, E, U 540/65 R34 15,990 SP1 HK E
John Deere
540/65 R30
8100, 8110, 8200, 8210, 8300, 8310, 8400, 8410 600/65 R28 13,290 DL LS
7200R, 7210R, 7215R, 7230R, 7250R, 7260R, 7270R, 7280R, 7290R N 600/70 R30 13,790 DL EY
Landini
Powermaster 180, 200, 220 13,790 DL EY
Q
N
R
K
S
T
L
Massey Ferguson
6497, 6499 Tier 3, Dyna 6 J, K 600/65 R65 13,290 DL LS HK
Order 0079.089.000 kit from Fendt, if 3rd and 4th service is required with
New Holland
Adapted for S/Nos 9xx 236001, 9xx 246001, 930 231001, 930 241001
With standard hose set, tractor must be equipped with 2 x aux valves.
8670, 8770, 8870, G170, G190, G210, G240 16.9 x 30 13,290 DL LS
Deluxe hose set will only fit tractors with joystick in armrest.
M 600/65 R28 DL EY
T8020, T8030, T8040, T8050, and TG210, TG230, TG255, TG285, TG305 B 600/70 R30 13,790 DL EY
Valtra
T120, T130, T140, T160, T170, T180, T190 A, P, Q 540/65 R30 13,790 DL EY HK
T132, T152, T153, T162, T164, T183, T172, T182, T192, T202, T203, T213 Direct/Versu P, Q, R 540/65 R30 13,490 DL HK LS
G
C
D
H
A
B
E
F
J
37
COUNTERWEIGHT AND BUCKET RECOMMENDATION MATRIX
Counterweight recommendation.
Which bucket should I choose?
Tractor weight to loader model.
TRACTOR WEIGHT (kg) BUCKET MODEL
Lift Snow
Model Capacity 3000 4000 4500 5000 5200 6000 7000 8000 9000 Areas of application H HT HD HV HDV Hy-Tip Grading
Clearing
Q76 2120 1500 1200 A counterweight increases tractor stability, traction and tractor braking force.
Precision
Grading
STONE
SERIES SERIES
FORK
SERIES SERIES SERIES SERIES SERIES MANURE PALLET
MP/MPT XH
H HT HD HV HDV FORKS FORKS
4 in 1 High Tipping
200PC
200PS
1000
1600
2500
150
200
135
160
185
210
240
135
160
185
210
185
210
240
260
200
220
240
260
210
240
260
160
185
210
220
200
220
240
260
130
150
170
190
230
MODEL
Q21/26
•• •• ••• • •
Q31/33/36
•• •• • • •• • ▪ ••• • • •
Q38/Q39
•• •• •• •• • •• • ▪ ▪ •• • • ••
Q41/46/49
•• •• •• •• • •• • • • • ▪ ▪ •• • • ••
Q48
•• ••••• •• • • • • • • • • ▪ •• • •• ••
Q51/56/58
••• •• ••••• ••• • • • • • • • •▪ • • • •• •
Q61/66/68
••• •• •• •• •• • • • • • • • •• • • • •• •
Q76/78
•• • •• •• •• • • • • • • •• • • • •
•• • •• •• •• • • • • • • •• • • • •
▪
Q88/98
MAXI-
Flexigrip
Counter
TopGrip
Flexibal
Silosplit
Hinged
Unigrip
Weight
POWERGRAB
Fork
1000
160
200
130
160
140
140
190
130
150
170
190
210
230
130
150
170
190
210
230
185
210
240
260
125
150
175
200
225
210
240
260
800
HD
MODEL
Q21/26
• • • • • • • • • • • •
Q31/33/36
• • • • • • • • • • • ••• • • • • • • • • ••
Q38/Q39
• • • • • • • • • • • • • • •••• • • • • • • • • • • • ••
Q41/46/49
• • • • • • • • • • • • • • •••• • • • • • • • • • ▪ • • ••
Q48
• • • • • • • • • • • • • • •••• • • • • • •• • • • • ▪ • • • ••
Q51/56/58
• • • • • • • • • • • • • • ••• • • • • • ••• •▪ • • • • • • • • •
Q61/66/68
• • • • • • • • • • • • •• • • •• • ▪ • • • • • • • •
Q76/78
• • • • • • • • • • • • •• • • •• • • • • • • • • •
Q88/98
• • • • • • • • • • • •• • • •• • • • • • • • •
C2
BUCKETS
GENERAL PURPOSE GENERAL PURPOSE WITH TEETH HEAVY DUTY
Series HT
Series H
Series HD
Model Width Capacity Hook Part No Price Model Width Capacity Hook Part No Price Model Width Capacity Hook Part No Price
1.35m 0.54 m³ Euro 11251018Q 1.35m 0.54 m³ Euro 11251108Q 1.85m 0.72 m³ Euro 11251068Q
135H 605 135HT 725 185HD 985
53" 18 cu.ft SMS 11251015Q 53" 18 cu.ft SMS 11251105Q 72" 25 cu.ft SMS 11251065Q
1.60m 0.65 m³ Euro 11251028Q 1.60m 0.65 m³ Euro 11251118Q 2.10m 0.82 m³ Euro 11251078Q
160HT 785 210HD 1,085
160H 63" 23 cu.ft
Type 3 11251023Q 655 63" 23 cu.ft SMS 11251115Q 83" 29 cu.ft SMS 11251075Q
SMS 11251025Q 1.85m 0.72 m³ Euro 11251128Q 2.40m 0.95 m³ Euro 11251088Q
185HT 885 240HD 1,385
1.85m 0.72 m³ Euro 11251038Q 72" 25 cu.ft SMS 11251125Q 94" 34 cu.ft SMS 11251085Q
185H Type 3 11251033Q 705 2.10m 0.82 m³ Euro 11251138Q 2.60m 1.03 m³ Euro 11251098Q
72" 25 cu.ft 210HT 985 260HD 1,585
SMS 11251035Q 83" 29 cu.ft SMS 11251135Q 102" 37 cu.ft SMS 11251095Q
2.10m 0.82 m³ Euro 11251048Q
210H 83" 29 cu.ft
Type 3 11251043Q 805 Remember to quote a Counter Weight
SMS 11251045Q
240H
2.40m 0.95 m³ Euro 11251058Q
905
HIGH VOLUME HIGH VOLUME HEAVY DUTY
Series HV
Series HDV
94" 33 cu.ft SMS 11251055Q
Model Width Capacity Hook Part No Price Model Width Capacity Hook Part No Price
2.00m 1.16 m³ Euro 11251148Q 2.10m 1.50 m³ Euro 11251808Q
200HV 835 210HDV 1,135
79" 41 cu.ft SMS 11251145Q 83" 43 cu.ft SMS 11251805Q
2.20m 1.28 m³ Euro 11251158Q 2.40m 1.70 m³ Euro 11251818Q
220HV 1,035 240HDV 1,435
87" 45 cu.ft SMS 11251155Q 94" 60 cu.ft SMS 11251815Q
2.40m 1.70 m³ Euro 11251168Q 2.60m 1.85 m³ Euro 11251828Q
240HV 1,335 260HDV 1,735
94" 60 cu.ft SMS 11251165Q 102" 65 cu.ft SMS 11251825Q
2.60m 1.85 m³ Euro 11251178Q
260HV 1,435
102" 65 cu.ft SMS 11251175Q
4 in 1
Precision
967mm
967mm
Straight (PS) Conical (PC)
Model Width Capacity Hook Part No Price Model Width Capacity Hook Part No Price Model Width Capacity Hook Part No Price
1.65m 1.65m Euro 11253138Q
160MP 0.48 m³ Euro 11252148Q 2,720 160MPT 0.48 m³ Euro 11252448Q 2,820 200PS 0.93 m³ 615
65" 65" 2.00m SMS 11253138Q
1.90m 1.90m 79" Euro 11253148Q
185MP 0.56 m³ Euro 11252158Q 3,020 185MPT 0.56 m³ Euro 11252458Q 3,120 200PC 0.78 m³ 785
75" 75" SMS 11253145Q
2.15m 2.15m The Precision Bucket is different from
210MP 0.66 m³ Euro 11252168Q 3,320 210MPT 0.66 m³ Euro 11252468Q 3,420
85" 85" other buckets by being narrower in the
Also available for skidsteer. See skidsteer implements page Also available for skidsteer. See skidsteer implements page front. The high volume of the bucket
and long base give better loads when
travelling between sites, reducing load
Order Selecto Fix for simple hose connection trips.
Material can also be placed with
FRONT TIPPING SPECIAL CLEARING BUCKET greater accuracy with increased
Rubber dampeners
XH Series
SPECIALIST BUCKET
Grading
Will require 3rd and 4th
service fuctions.
Euro
2.60m
260XH 2.20 m³
102" Without 11252680Q 2,545 4th service kit Special bucket mounted 4th 2.40m
service valve to activate flap
60003452 375 240 94"
0.83 m³ 11251738Q 1,155
Also available with Trima hooks at Euro prices. Bucket mounted
Hoses included with hydraulic implements are designed to mount to the couplings on the tool carrier. Longer hose kits available additional cost
Contact Alo UK for implement recommendation for loader C4
BUCKET GRABS
HEAVY DUTY BUCKET GRAB HEAVY DUTY BUCKET GRAB HEAVY DUTY BUCKET GRAB
BOH
BOH
Mouth Mouth Mouth
SE
Powergrab
Powergrab
Powergrab
1500mm
1500mm
1500mm
Euro hooks welded
Price includes loader fittings and hoses Powergrab BOH c/w hooks Price includes loader fittings and hoses
Model Width Capacity Tines Hook Part No Price Model Width Capacity Hook Part No Price Model Width Capacity Tines Hook Part No Price
1.85m Euro 11254081Q 1.85m
185BOH 1.01 m³ 6 11254080Q 2,700 1.85m 185 SE* 1.01 m³ 6 11250728Q 2,700
72"
Without hooks 185BOH 1.01 m³ Kramer 11254089Q 2,950 72"
72" Weidemann
2.10m 11254091Q 2.10m
Rail Type
Euro
83" Euro 11254094Q 83"
2.10m
2.40m 210BOH 1.15 m³ Kramer 11254095Q 3,150 2.40m
240BOH 1.30 m³ 8 11254102Q 3,250 83" 240 SE 1.30 m³ 8 11250748Q 3,250
94" Weidemann 11254096Q 94"
Multibenne
Mouth
Pressure Relief Part No Price
Bobcat FDI 11254112Q 225
Valve for PG BOH 60002029 150
N.B. For high flow/pressure Telehandler,
Claas Scorpion 11254123Q 250
1248mm
We recommend a pressure relief valve.
Side plate extension set
JCB Qfit 11254125Q 290 The NEW Powergrab BOH Multipurpose grab
Adapted to mount to material handlers to suit Bolt On Hooks (BOH).
Part No Price
Manitou MTL 11254124Q 250 Prepared for a Bolt on Cutting Edge (BCE).
Bolt On Hook
1.30m 0.69 m³
Matbro (Pin and Cone) 11254113Q 250 130 7 11250818Q 1,475
51" 24 cu.ft
1.50m 0.79 m³
Volvo 11254147Q 295 150 8 11250828Q 1,675
59" 27 cu.ft
1.70m 0.90 m³
Hauer 11254366Q 305 170 9 11250838Q 1,875
Euro
67" 32 cu.ft
1.90m 1.01 m³
SkidSteer 11254368Q 255 190 10 11250848Q 2,075
Model Width Colour Type Part No Price 75" 35 cu.ft
185BOH 1.85m 11254153Q 175 2.10m 1.11 m³
Schäffer 11254367Q 290 210 11 11250858Q 2,275
Yellow
Ochra
Hoses included with hydraulic implements with hooks and are designed to mount to the couplings on the tool carrier. Longer hose kits available additional cost
Contact Alo UK for implement recommendation for loader. C5
FORKS AND GRABS
MANURE FORK SILAGE GRAB SHEAR GRAB
Manure Forks
Silograb
Silocut SGII
Mouth Mouth
1172mm
770mm
price includes hoses Euro version includes hoses (also available with Trima hooks)
Model Width Tines Hook Part No Price Model Width Capacity Tines Hook Part No Price Model Width Capacity Tines Hook Part No Price
1.30m
Euro 11251838Q
1.30m
Euro 11250888Q Euro 11254226Q 2,595
130 7 tines 655 130 0.69 m³ 7 1,575 125 SG 1.25m 0.80 m³ 10
Type 3 11251833Q Type 3 11250883Q 47"
SMS 11254226Q 2,595
51" 51"
SMS 11251835Q SMS 11250885Q w/o 11254227Q 2,495
1.50m
Euro 11251848Q
1.50m
Euro 11250898Q Euro 11254229Q 2,995
150 8 tines 725 150 0.79 m³ 8 1,775 150 SG 1.50m 0.95 m³ 12
Type 3 11251843Q Type 3 11250893Q 59"
SMS 11254230Q 2,996
59"
SMS 11251845Q 59" SMS 11250895Q w/o 11254228Q 2,895
1.70m Euro 11251858Q 1.70m Euro 11250908Q Euro 11254232Q 3,395
170 9 tines 805 170 0.90 m³ 9 1,975 1.75m
67" SMS 11251855Q 67" SMS 11250905Q 175 SG 68"
1.10 m³ 14 SMS 11254233Q 3,396
1.90m Euro 11251868Q 1.90m Euro 11250918Q w/o 11254231Q 3,295
190 10 tines 905 190 1.01 m³ 10 2,175
75" SMS 11251865Q 75" SMS 11250915Q 2.00m
200 SG 1.25 m³ 16 11254234Q 3,995
2.30m Euro 11251878Q 2.10m 78"
230 12 tines 1,035 210 1.11 m³ 11 11250928Q 2,375 w/o
91" SMS 11251875Q 83" 2.25m
225 SG 1.40 m³ 18 11254237Q 4,395
2.30m
Euro
88"
230 1.22 m³ 12 11250938Q 2,575
ROUND BALE - BRASH 91" 2nd year warranty does not include any wearing parts.
Grapple
Maxi
2.50m
250 1.33 m³ 13 11250948Q 2,775
98" Part No Price
Pressure Relief Valve 60002029 150
N.B. For high flow/pressure Telehandler,
We recommend a pressure relief valve.
NEW Silocut SGII
Welded sleeves for the tines
Silocut SGII
Without teeth With teeth Max hyd pressure
Conus 3 outer tines
c/w Hoses. Order with FOC protective backscreen. Dacromet® corrosion protection on Bolt-on knifes 2 cylinders - 210 bar
New 80mm x 80mm Backframe hook interface to accept 3 cylinders - 250 bar
Model Width Tines Length Hook Part No Price
various bolt-on hook
40mm cylinder pins Order pressure reduction
210 2.10m 4 grab 11250533 3,200 Improved greasing points for the main pivot pins valve if pressure
24cm More efficient cutting with the side tines closer to the side exceeds above
83" 4 grab
210T 6 lower
11250536 3,400 knife
Stong corner braces to protect knives.
24cm
94" 4 grab
240T 7 lower
11250537 3,600
Flexigrip
Uniigrip
Flexibal
with integral tines
89mm
Quadrogrip
Single Spike
Topgrip
MKII
Backstop
PALLET FORK
LOADERS
Big Bale Fork
Fixed frame
Log Grab Attachent
ISO type frame
MX 11252722Q
1600kg Pallet Fork Accessories (ISO type)
Euro 11252338Q
Pallet Fork Hydraulic
price includes hooks
Type 3 11252333Q Spreader Kit
Model Width Tines Hook Part No Price 1220
mm
975
Euro 11251368 Will not mount to old Alo type backframe
SMS 11252335Q
140 140cm 2 Type 3 11251363 775 Designed to ease manoeuvering and
SMS 11251365 spreading of the pallet fork tines without
MX 11252732Q
Euro 11251378 leaving the tractor.
190 190cm 5 Type 3 11251373 1,095 Ideal to clamp plallets/crate when loading or
Euro 11252348Q stacking
SMS 11251375
1220 Width Part No Price
Hinged Square Bale Fork Options 2500kg mm
SMS 11252345Q 1,015 Includes 2 x hydraulic cylinders Open 1280mm
Closed 350mm 11252050Q 895
Description Part No Price Does not include backframe or tines (Outside to outside of tines)
MX 11252732Q
Big Bag Lifter adapter 11260349 95
Extension frame 11260348 95 Also available for skidsteer. See skidsteer implements page
Hoses included with hydraulic implements with hooks and are designed to mount to the couplings on the tool carrier. Longer hose kits available additional cost
Lifting Arm
Lifting Arm
Height Height
adjustable adjustable
Model Height Capacity Hook Part No Price Model Height Capacity Hook Part No Price Model Height Capacity Hook Part No Price
W/O 11254361Q 425 Dual W/O 11254363Q 825 W/O 11254364Q 1,025
Single Euro 11254541Q 1500 Euro 11254623Q BM large 11254632Q 1,325
975
1000 SMS 11254542Q Loaders SMS 11254624Q Triple 151cm Claas Scorpion 11254633Q 1,305
575 3x
Loaders Type 3 11254543Q 151cm BM large 11254625Q 1,125 1500 to JCB Qfit 11254634Q 1,290
2x 1500kg
MX 11254641Q to Claas Scorpion 11254627Q 1,105 Handlers 204cm Manitou 11254635Q 1,255
147cm 1000kg Dual 1500kg
BM large 11254544Q 725 204cm JCB Qfit 11254628Q 1,090 Merlo 11254636Q 1,300
1500
Single JCB Qfit 11254547Q 690 Manitou 11254629Q 1,055 Matbro 11254637Q 1,275
Handlers
1000 Manitou 11254548Q 655 Merlo 11254630Q 1,100
Remember to quote a Counter Weight
Handlers Merlo 11254549Q 700 Matbro 11254631Q 1,075
Matbro 11254550Q 675 Big Bag Lifter. ROUND BALE
Silosplit HD
Dual & Triple models, capable of lifting two or three bags at once have the extra
capacity of 1500kgs (each hook), along with the ability of extending the arm for
higher bags to 51cm in 17mm increments
Order counterweight for tractor/loader combinations as per regulation EN12525 Ideal for stones and cut logs THREE-POINT LINKAGE
Capacity Tines
Three-point
linkage hitch
Model H/D/W Hook Part No Price Model Width Hook Part No Price
H 725
150 1.50m 15 tines 11251548Q 1,065
Small D 780 up to 800kg 11251676 495
W 810 Lower Euro
rear 200 2.00m 18 tines 11251558Q 1,265
H 725 links
Large D 1030 1000 - 1500kg 11251661 555
W 810
Hose Kit Options
Capacities - from 800kg upto a maximum of 1500kg. Description Part No Price
Counterweights must be filled by the end user. 1200mm Long hoses - kit for Implements Rear shown
1214901 50
Model "Large" filled with concrete to position 1 = 1000kg. to fit directly onto 3rd service valve Attaches to 3 point hitch and Euro Hook Part No Price
Combination of steel and concrete for a weight up to 1500kg
Conversion for older loader To fit hoses implements attach via pin securing. Euro 11251438
10377123 130 Ideal for rear and front hitch. 455
between 3rd service and tool carrier Q700/900 SMS 11251435
Hoses included with hydraulic implements with hooks and are designed to mount to the couplings on the tool carrier. Longer hose kits available additional cost
Contact Alo UK for implement recommendation for loader. C9
SKIDSTEER IMPLEMENTS
GENERAL PURPOSE (Skidsteer) SQUARE BALE (Skidsteer) PALLET FORK (Skidsteer)
PALLET FORK
WALK-THRU.
Series S
Fixed frame pallet forks for SkidSteer with walk through step
Model Width Capacity Hook Part No Price Model Width Tines Hook Part No Price Model Tines Length Hook Part No Price
1.85m 0.60 m³ 2x
185S 11251721Q 710 140(125) 140cm 125cm
Skid 11251720Q 495 800kg 1060mm 11253994Q 850
73" 18 cu.ft Skid
2.10m 0.68 m³ Steer
210S 83" 24 cu.ft
11251821Q 815 Big Bale Fork Options 1060mm 11253990Q 950
1500kg
For skidsteer connection only. Description Part No Price
Special order!
1220mm 11253988Q 1000
Skid
Extension frame 11215019 95
1060mm 11253980Q 1050
MULTI PURPOSE (Skidsteer) 2000kg
Mouth
4 in 1
MKII
Single Spike
2500kg 1220mm 11253974Q 1150
967mm
79
65 65 65
Euro Standard Bolt On Hook Euro Extended Eye Euro Extended Hook and Eye
Alo (Type 3)
856
420
500
Euro Weld on Ear Euro Weld on Ear Trima Weld On Ear Weld on Ears
C 11
HEAVY BOLT ON HOOKS
JCB Q-fit Kramer/Claas Scorpion Pin and Cone
Model Type Box Size Part No Price Model Type Box Size Part No Price Model Type Box Size Part No Price
Hook 40 & 80 60003104 Hook 40 & 80 60003283 Hook 40 & 80 60003107
Then choose Then choose Pin and Then choose
Q-fit 265 Kramer 280 250
U Bolt
40 x 80 60004375
U Bolt
40 x 80 60004375 Cone U Bolt
40 x 80 60004375
80 x 80 60004374 80 x 80 60004374 80 x 80 60004374
Model Type Box Size Part No Price Model Type Box Size Part No Price
Will mount to 40mm x 80mm box section frames only
Hook 40 & 80 60003106 Hook 40 & 80 60003105
Then choose Then choose Model Type Part Number Price
Merlo 275 Manitou 230
40 x 80 60004375 40 x 80 60004375
U Bolt U Bolt Volvo BM Bolt on 11209713 300
80 x 80 60004374 80 x 80 60004374
If the hook type you require is not shown above, please call your area manager of the Alo UK sales office.
C 12
HELPFUL INFORMATION
Weights of Materials Chart Volume Conversions
Weights of materials KG/m³ % Fill Weights of materials KG/m³ % Fill ` Metric to Imperial Conversions
Aggregate (brick) 1820 100 Flour 440 85 1 cubic cm = 0.06102 cubic inches 1 cu cm = 0.06102 cu in
Ashes 600 85 Glass 2,600 85 1 cubic metre = 35.31467 cubic feet 1 cu m = 35.31467 cu ft
Asphalt 1,600 100 Granite chippings 2,655 85 1 cubic metre = 1.31 cubic yards 1 cu m = 1.30795 cu yd
Barley 609 85 Gravel (dry) 1,700 85 Imperial to Metric Conversions
Beet pulp (nuts) 600 85 Lime (quick loose) 850 100 1 cubic inch = 16.38706 cm 1 cu in = 16.38706 cm³
Beet pulp (pressed) 900 110 Limestone (crushed) 1,526 100 1 cubic foot = 0.02832 m³ 1 cu ft = 0.02832 m³
Bewers grains 1,110 85 Manure (farmyard) 900 85 1 cubic foot = 28316.846 cm³ 1 cu ft = 28316.846 cm³
Brick aggregate 1,830 100 Mortar 1,600 100 1 cubic yard = 0.76455 m³ 1 cu yd = 0.76455 m³
Bricks (common) 2,450 per 1,000 x Oats 410 85
Brick (facing) 2,700 per 1,000 x Peat (dry) 400 100 Measurment Conversions
Cement (natural) 895 100 Potatoes 690 85 Metric to Imperial Conversions
Cement (portland) 1,440 100 Rubble 1,025 100 1 sq. cm = 0.15500 sq. inches 1 sq. cm = 0.15500 sq. in
Chalk 2,200 100 Refuse (dry) 398 100 1 sq. metre = 10.763 91sq. feet 1 sq. m = 10.763 91 sq. ft
Clay (fire) 2,080 100 Sand (dry) 1,550 100 1 sq. metre = 1.195 99 sq. yards 1 sq. m = 1.195 99 sq. yd
Clay (wet) 1,880 100 Sand (wet) 1,900 110 1 hectare = 2.47105 acres 1 ha = 2.47105 acres
Coal (anthrace) 896 100 Sawdust 250 110 1 hectare = 0.00386 sq. miles 1 ha = 0.00386 sq. mi
Coal (bituminous) 1,261 100 Silage (ensiled) 730 110 Imperial to Metric Conversions
Coal (canneI) 1,261 100 Silage (green) 340 110 1 sq. inch = 6.4516 sq. cm 1 sq. in = 6.4516 sq. cm
Coal (newcastle) 1,261 100 Slate 2,723 100 1 sq. foot = 929.0304 sq. cm 1 sq. ft = 929.0304 sq. cm
Coal (welsh) 1,261 100 Slurry 1,740 85 1 sq. foot = 0.09290 sq. metres 1 sq. ft = 0.09290 sq. m
Coke (loose) 597 85 Snow (fresh) 141 110 1 sq. yard = 0.83613 sq. metres 1 sq. yd = 0.83613 sq. m
Coke (petroleum) 700 85 Snow (wet) 514 110 1 acre = 0.40469 hectares 1 acre = 0.40469 ha
Copper (concentratre) 2,300 85 Sodium chloride (dry/salt) 1,300 85
Earth (dry loose) 1,112 100 Sugar beet 540 100
Earth (wet packed) 1,550 100 Turnips 540 100
Fertiliser (mixed) 1,000 85 Wheat 730 85
Fertiliser (nitrate) 1,250 85
*These figures are approximate and are used as a guide to material density
C 12
Important: The following delivery charges will apply to all
Alo UK Area Managers. orders below £2,000 retail if delivered by Alo UK.
Retail Order Fixed Carriage Charge
Single option/accessory Appropriate Carriages Costs
Quicke DimensionSeries