Professional Documents
Culture Documents
APX18-206513-CT0
Optimizer® Dual Polarized Antenna, 1710-2170, 65deg, 14.7/14.9dBi, 0.6m, FET, 0deg
FEATURES / BENEFITS
Reduction of site dimensions will ease site acceptance.
Compatible with usual base stations with 35 dB typical isolation between ports.
Effective polarization diversity ensured by high cross polar discrimination.
Due to short length it is fully adapted to urban wall mounting situation.
Technical Features
ELECTRICAL SPECIFICATIONS
Frequency Range MHz 1710-1900 1900-2170
Gain dBi (dBd) 14.7 (12.6) 14.9 (12.8)
Horizontal Beamwidth deg 65 63
Vertical Beamwidth deg 13.5 12.5
Electrical Downtilt Range deg 0
Front-To-Back Ratio dB >28
Polarization Dual pol +/-45°
VSWR < 1.5:1
Isolation between Ports dB >30
3rd Order IMP @ 2 x 43 dBm dBc >150 N/A
7th Order IMP @ 2x46 dBm dBc N/A >170
Impedance Ohms 50
Maximum Power Input W 80
MECHANICAL SPECIFICATIONS
Lightning Protection Direct Ground
Connector Type/Location (2) 7-16 DIN Female/Bottom
Dimensions - HxWxD mm (in) 668 x 198 x 50 (26.29 x 7.79 x 1.97)
Weight w/o Mtg Hardware kg (lb) 3.4 (7.5)
Weight w/ Mtg Hardware kg (lb) 6.2 (13.6)
Survival/Rated Wind Speed km/h (mph] 200 (125) / 160 (100)
Wind Load @ Rated Wind, Front N (lbf) 279 (62)
Wind Load @ Rated Wind, Max. N (lbf) 279 (62)
Wind Load @ Rated Wind, Side N (lbf) 155 (35)
Wind Load @ Rated Wind, Rear N (lbf) 248 (56)
TESTING AND ENVIRONMENTAL
Operation temperature °C (°F) -40 to 60 (-40 to 140 )
MATERIAL
Radome Material/Color Fiberglass/Light Grey RAL7035
Mounting Hardware Material Diecasted Aluminum
Radiating Element Material Brass
Reflector Material Aluminum
ORDERING INFORMATION
Packing Dimensions, HxWxD mm (in) 770 x 300 x 170 (30.3 x 11.81 x 6.69)
Mounting Hardware APM40-2
All information contained in the present datasheet is subject to confirmation at time of ordering Page 1 of 2
PRODUCT DATASHEET
APX18-206513-CT0
Optimizer® Dual Polarized Antenna, 1710-2170, 65deg, 14.7/14.9dBi, 0.6m, FET, 0deg
All information contained in the present datasheet is subject to confirmation at time of ordering Page 2 of 2