Professional Documents
Culture Documents
System Bandwidth
Choice: 1.4 MHz (6RB) | 3 MHz (15RB) | 5 MHz (25RB) | 10 MHz (50RB) | 15 MHz (75RB) | 20 MHz (100RB)
Default: 5 MHz (25RB)
rfmw.em.keysight.com/wireless/helpfiles/n7624/Content/Main/PRACH Wizard (Basic LTE-A).htm#:~:text=The Logical Root Sequence Index is the valu… 1/8
3/10/2021 PRACH Wizard (Basic LTE-A FDD)
Double-click or use the drop-down menu to set the system bandwidth and number of Resource Blocks (RB).
System Bandwidth Resource Block Offset Range Resource Block Offset Default Value
1.4 MHz 0 0
3 MHz 0 to 9 0
5 MHz 0 to 19 0
10 MHz 0 to 44 0
15 MHz 0 to 69 0
20 MHz 0 to 94 0
Auto-configuration
Choice: RA Configuration | PRACH Test Preambles (36.141)
Default: RA Configuration
Double-click or use the drop-down menu to set Auto-configuration.
Where Auto-configuration = RA configuration, the value of Waveform Generation Length is automatically set by the software
based on PRACH Configuration Index parameter.
Where Auto-configuration = PRACH Test Preamble (36.141), the wizard configures PRACH Test Preambles based on
3GPP TS 36.141 and without Cyclic Shift v. In this case, you must set the Preamble Index to satisfy Cyclic Shift v as defined
in 36.141 on setting the PRACH Test Preambles (refer to tables below).
Example: Auto-configuration = PRACH Test Preamble (36.141),Cyclic Shift Set = Normal Mode, and Burst (Preamble)
Format = 0, so Preamble Index should be set to 32 to satisfy Cyclic Shift v = 32 (refer to 34.141 and tables below).
Test Preambles for Normal Mode
Burst Format Ncs value Logical Root Sequence Index Cycle Shift v
0 13 22 32
1 167 22 2
2 167 22 0
3 0 22 0
4 10 0 0
Burst Format Ncs value Logical Root Sequence Index Cycle Shift v
0 15 384 0
1 202 384 0
2 202 384 0
3 237 384 0
Preamble Format
The software sets the Preamble Format based on the PRACH Configuration Index as shown in the table for that parameter.
rfmw.em.keysight.com/wireless/helpfiles/n7624/Content/Main/PRACH Wizard (Basic LTE-A).htm#:~:text=The Logical Root Sequence Index is the valu… 2/8
3/10/2021 PRACH Wizard (Basic LTE-A FDD)
Preamble PRACH Cyclic Prefix Length PRACH Sequence Length PRACH Length (Tcp +
Format (Tcp) (Tseq) Tseq)
0 3168 x Ts = 0.103125 ms 24576 x Ts = 0.8 ms 0.903.125 ms
1 21024 x Ts = 0.684375 ms 24576 x Ts = 0.8 ms 1.484375 ms
2 6240 x Ts = 0.203125 ms 2 x 24576 x Ts = 1.6 ms 1.803125 ms
3 21024 x Ts = 0.684375 ms 2 x 24576 x Ts = 1.6 ms 2.284375 ms
Index numbers 30, 46, 60, 61, and 62 are not assigned, and are not available for input.
PRACH Configuration index Preamble Format System Frame Number Subframe Number
0 0 Even 1
1 0 Even 4
2 0 Even 7
3 0 Any 1
4 0 Any 4
5 0 Any 7
6 0 Any 1, 6
7 0 Any 2, 7
8 0 Any 3, 8
9 0 Any 1, 4, 7
10 0 Any 2, 5, 8
11 0 Any 3, 6, 9
12 0 Any 0, 2, 4, 6, 8
13 0 Any 1, 3, 5, 7, 9
14 0 Any 0, 1, 2, 3, 4, 5, 6, 7, 8, 9
15 0 Even 9
16 1 Even 1
17 1 Even 4
18 1 Even 7
19 1 Any 1
20 1 Any 4
21 1 Any 7
22 1 Any 1, 6
23 1 Any 2, 7
24 1 Any 3, 8
25 1 Any 1, 4, 7
26 1 Any 2, 5, 8
27 1 Any 3, 6, 9
rfmw.em.keysight.com/wireless/helpfiles/n7624/Content/Main/PRACH Wizard (Basic LTE-A).htm#:~:text=The Logical Root Sequence Index is the valu… 3/8
3/10/2021 PRACH Wizard (Basic LTE-A FDD)
PRACH Configuration index Preamble Format System Frame Number Subframe Number
28 1 Any 0, 2, 4, 6, 8
29 1 Any 1, 3, 5, 7. 9
30 N/A N/A N/A
31 1 Even 9
32 2 Even 1
33 2 Even 4
34 2 Even 7
35 2 Any 1
36 2 Any 4
37 2 Any 7
38 2 Any 1, 6
39 2 Any 2, 7
40 2 Any 3, 8
41 2 Any 1, 4, 7
42 2 Any 2, 5, 8
43 2 Any 3, 6, 9
44 2 Any 0, 2, 4, 6, 8
45 2 Any 1, 3, 5, 7. 9
46 N/A N/A N/A
47 2 Even 9
48 3 Even 1
49 3 Even 4
50 3 Even 7
51 3 Any 1
52 3 Any 4
53 3 Any 7
54 3 Any 1, 6
55 3 Any 2, 7
56 3 Any 3, 8
57 3 Any 1, 4, 7
58 3 Any 2, 5, 8
59 3 Any 3, 6, 9
60 N/A N/A N/A
61 N/A N/A N/A
62 N/A N/A N/A
63 3 Even 9
rfmw.em.keysight.com/wireless/helpfiles/n7624/Content/Main/PRACH Wizard (Basic LTE-A).htm#:~:text=The Logical Root Sequence Index is the valu… 4/8
3/10/2021 PRACH Wizard (Basic LTE-A FDD)
The Logical Root Sequence Index is the value of RACH_ROOT_SEQUENCE which is the logical index for the Zadoff-Chu
sequence used for PRACH preamble generation. There is a relationship between the Logical Root Sequence Index and
the Physical Root Sequence Index given by Root Zadoff-Chu sequence order table and preamble format.
In the case where preambles corresponding to Preamble Index cannot be generated from a single root Zadoff-Chu
sequence, Logical Root Sequence Index is incremented until corresponding Preamble sequences are found.
That incremented Logical Root Sequence Index is displayed in the Logical Root Sequence Index (Incremented) field.
Physical Root Sequence Index, Cyclic Shift v and Incremented Logical Root Sequence Index are automatically
changed on GUI based on Cyclic Shift Set, Ncs Configuration, Logical Root Sequence Index and Preamble Index.
In the case where preambles corresponding to Preamble Index cannot be generated from a single root Zadoff-Chu
sequence, Logical Root Sequence Index is incremented until corresponding Preamble sequences are found.
That incremented Logical Root Sequence Index is displayed in the Logical Root Sequence Index (Incremented) field.
Physical Root Sequence Index, Cyclic Shift v and Incremented Logical Root Sequence Index are automatically
changed on GUI based on Cyclic Shift Set, Ncs Configuration, Logical Root Sequence Index and Preamble Index.
Ncs Configuration
Range:
rfmw.em.keysight.com/wireless/helpfiles/n7624/Content/Main/PRACH Wizard (Basic LTE-A).htm#:~:text=The Logical Root Sequence Index is the valu… 5/8
3/10/2021 PRACH Wizard (Basic LTE-A FDD)
0 to 15 (Unrestricted) for Format 0 to 3
0 to 14 (Restricted) for Format 0 to 3
Default: 0
When Auto-configuration is set to RA Configuration, enter a value for the number of cycle shifts (Ncs) configuration for
preamble generation.
Ncs value is determined by Ncs configuration, Cyclic Shift Set, and Preamble format.
The corresponding Unrestricted Sets values and Restricted Sets values are shown in the table for Cyclic Shift Set.
When Auto-configuration is set to PRACH Test Preambles (36.141), this parameter is read-only.
In the case preambles corresponding to Preamble Index cannot be generated from a single root Zadoff-Chu
sequence, Logical Root Sequence Index is incremented until corresponding Preamble sequences are found.
That incremented Logical Root Sequence Index is displayed on Logical Root Sequence Index (Incremented)
parameter.
Physical Root Sequence Index, Cyclic Shift v, and Incremented Logical Root Sequence Index are automatically
changed on the PRACH Wizard based on Cyclic Shift Set, Ncs Configuration, Logical Root Sequence Index, and
Preamble Index.
Ncs value
The software sets this value based on the Ncs Configuration setting.
Preamble Index
Range: 0 to 63
Default: 0
Enter a value for the preamble index. (See 3GPP TS 36.211.)
When the Auto-configuration parameter is set to PRACH Test Preamble (36.141),you must set the Preamble Index to satisfy
Cyclic Shift v as defined in 3GPP 36.141 (PRACH Test Preambles test).
Example: Auto-configuration = PRACH Test Preamble (3GPP TS 36.141),Cyclic Shift Set = Normal Mode, and Preamble
Format = 0, so Preamble Index should be set to 32 to satisfy Cyclic Shift v = 32 (refer to 34.141 A.6).
Refer to Preamble Index-related information in TS36.212 5.3.3.1.3, TS36.321 5.1, and TS36.331 6.3.2.
This parameter is read only and the value is automatically set by the software based on Logical Root Sequence Index and
the Preamble Index.
In the case where preambles corresponding to Preamble Index cannot be generated from a single root Zadoff-Chu
sequence, Logical Root Sequence Index is incremented until corresponding Preamble sequences are found.
That incremented Logical Root Sequence Index is displayed in the Logical Root Sequence Index (Incremented) field.
Physical Root Sequence Index, Cyclic Shift v and Incremented Logical Root Sequence Index are automatically
changed on GUI based on Cyclic Shift Set, Ncs Configuration, Logical Root Sequence Index and Preamble Index.
Cyclic Shift v
This parameter is read only and the value is automatically set by the software based on Logical Root Sequence Index ,
Preamble Index, Ncs Configuration, and Cyclic Shift Set. Refer to 34.141 A.6.
In the case where preambles corresponding to Preamble Index cannot be generated from a single root Zadoff-Chu
sequence, Logical Root Sequence Index is incremented until corresponding Preamble sequences are found.
That incremented Logical Root Sequence Index is displayed in the Logical Root Sequence Index (Incremented) field.
Physical Root Sequence Index, Cyclic Shift v and Incremented Logical Root Sequence Index are automatically
changed on GUI based on Cyclic Shift Set, Ncs Configuration, Logical Root Sequence Index and Preamble Index.
Refer to Preamble Index-related information in TS36.212 5.3.3.1.3, TS36.321 5.1, and TS36.331 6.3.2.
Default: On
When the Auto-configuration is PRACH Test Preambles (36.141), double-click or use the drop-down menu to turn the Time
Offset Base State on or off. Otherwise it’s hidden.
When the Time Offset Base State is on, the Timing Offset in the component carrier node is set to the Time Offset Base
Value. Otherwise it's not set.
rfmw.em.keysight.com/wireless/helpfiles/n7624/Content/Main/PRACH Wizard (Basic LTE-A).htm#:~:text=The Logical Root Sequence Index is the valu… 8/8