Professional Documents
Culture Documents
Zapper -
Rechargeable Mosquito, Fly Killer
and Bug Zapper Racket -
4,000 Volt -
USB Charging,
Humidifier specs
A humidifier has many functions but if one of its components were to be removed or stop
working, the humidifier would not be able to function.
You can fully understand how a humidifier works once you understand how its parts
come together to release moisture. The main components of a humidifier is what makes
this popular appliance produce the outstanding results in your home.
Water Control Valve (Float): Allows the humidifier to receive water flow
Fan: The fan assists the evaporation of the water by blowing air into the wick.
(Not in all humidifiers)
Reservoir: The reservoir holds the water, which is needed to produce evaporation.
These are the basic parts of a humidifier that must all work together, in order for the
humidifier itself to function properly. Other components that are needed for a humidifier
to operate, but are not in all types, are:
Wick (Filter)
Evaporator Pad
Heating Element
Relay module
A relay is an electrically operated switch that can be turned on or off, letting the current
go through or not, and can be controlled with low voltages, like the 5V provided by the
Arduino pins.
Controlling a relay module with the Arduino is as simple as controlling any other output
as we’ll see later on.
Crowduino .
Specification
Microcontroller “ATmega328”
SRAM 2 KB (ATmega328)
EEPROM 1 KB (ATmega328)
12V battery
Capacity: 5000mAh
Weight: 704g
DC to DC converter
SPECIFICATIONS
Output Voltage Setting: Outputs are factory preset to within ±1% of the nominal output
voltage.
T/C terminal: For single output models, the T/C terminal can be used to trim the output
more precisely to the nominal voltage rating by connecting an external resistor from the
T/C terminal to either the + or - terminal. For dual output models, the T/C terminal is the
output common.
Polarity: The output of single output models may be connected in either polarity. Dual
output models have a positive/common/negative output terminal configuration.
Input/Output Isolation:
Capacitance: 100 pF
-------|---------------------|-------------
-------------------------------------------
-------------------------------------------
Specifications:
Connector Dimensions: 5.5mm (0.2") jack, 2.1mm (0.08") center pole diameter
Outer Dimensions: 14.13mm (0.56") length x 9mm (0.35") width x 14.9mm (0.59")
height
Specifications
Attribute Value
Diameter 10mm
Length 24 mm
Peak Wavelength525 nm
Current Rating 9 mA