Professional Documents
Culture Documents
on
SEMESTER : VII
REG.NO : ANA17067
Semester : VII
Reg.No : ANA17067
FACULTY IN-CHARGE:
Dr. B.M.Shameem
SIGNATURE OF EXAMINER
2|Page
S.NO CONTENTS PAGE NO
LIST OF FIGURES 4
1 INTRODUCTION 5
2 AIM 5
3|Page
LIST OF FIGURES:
1. 3D model of the vessel
2. Towing tank with model
3. Cross Sectional view of the towing tank with model
4. Mesh generation in OpenFOAM
5. Visualising the generated mesh in ParaView
6. Sliced view of generated mesh along y axis
4|Page
1. Introduction:
Meshing -- or mesh generation -- is the process of generating polygonal or
polyhedral mesh (i.e., the shape of the polygon/polyhedral is made up of multiple edges, faces
and vertices). Meshing is often used in software-based simulation for Finite Element Analysis
(FEA) and Computational Fluid Dynamics (CFD). Meshing is an integral part of the engineering
simulation process where complex geometries are divided into simple elements that can be used
as discrete local approximations of the larger domain. The mesh influences the accuracy,
convergence and speed of the simulation.
2. Aim:
The Aim of the report is to generate a mesh of a ship model with towing tank in
OpenFOAM.
5|Page
4. Creating a towing tank around the vessel model:
6|Page
5. Mesh generation in OpenFOAM:
7|Page
Figure 6: Sliced view of generated mesh along y axis.
7. Conclusion:
8|Page