Professional Documents
Culture Documents
Propulsion 3034
47 bkW @ 2600 rpm
63 bhp @ 2600 rpm
SPECIFICATIONS
I-4, 4-Stroke-Cycle-Diesel
Bore— mm (in) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 (3.82)
Stroke—mm (in) . . . . . . . . . . . . . . . . . . . . . . . . . 100 (3.94)
Displacement—L (cu in). . . . . . . . . . . . . . . . . . . . 3.0 (183)
Aspiration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DINA
Rotation (from flywheel end). . . . . . . Counterclockwise
Compression Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . 17.5:1
Capacity for Liquids —L (U.S. gal)
Cooling System . . . . . . . . . . . . . . . . . . . . . . . 8.75 (2.31)
Lube Oil System (refill) . . . . . . . . . . . . . . . . . . . . 8 (2.1)
Oil Change Interval — hrs . . . . . . . . . . . . . . . . . . . . . . 500
Shown with Caterpillar DEO 10W30 or 15W40
Accessory Equipment Engine Weight (wet)
(approx) — kg (lb) . . . . . . . . . . . . . . . . . . . . . . . 263 (579)
Power produced at the flywheel will be within standard tolerances up to 50°C (122°F)
combustion air temperature measured at the air cleaner inlet, and fuel temperature up to
52°C (125°F) measured at the fuel filter base. Power rated in accordance with NMMA
procedure as crankshaft power. Reduce crankshaft power by 3% for propeller shaft power.
3034 MARINE PROPULSION – 47 bkW (63 bhp)
PERFORMANCE CURVES
C Rating — DM6321-00
60 100
90
50
13.5 80
3,4 12 70
40
Power - bhp
10 60
3
30 50
8
40
20 M 2
6
30 M
20
10
4 10
P P
0 0
1000 1400 1800 2200 2600 3000 1000 1400 1800 2200 2600 3000
Engine Speed - rpm Engine Speed - rpm
47 kW SI Metric 63 hp English
Performance Data Performance Data
Intake Exh Exh Intake Exh Exh
Engine Engine BSFC Fuel Air Stack Gas Engine Engine BSFC Fuel Air Stack Gas
Speed Power g/ Rate Flow Temp Flow Speed Power lb/ Rate Flow Temp Flow
rpm kW kW-h L/h m3 /min o
C m3 /min rpm hp hp-h gph cfm o
F cfm
Zone 3 2600 47.0 241 13.5 3.1 509 8.5 Zone 3 2600 63 .396 3.6 109 948 300
Curve: 3 2400 45.3 216 11.7 3.0 505 8.1 Curve: 3 2400 61 .356 3.1 106 941 286
2000 41.3 217 10.7 2.6 471 6.7 2000 55 .357 2.8 92 879 236
1600 34.3 235 9.6 2.2 473 5.8 1600 46 .387 2.5 78 884 205
1200 25.2 243 7.3 1.9 415 4.5 1200 34 .399 1.9 67 780 159
1000 20.3 250 6.1 1.7 380 3.8 1000 27 .411 1.6 60 715 134
Max 2600 47.0 241 13.5 3.1 509 8.5 Max 2600 63 .396 3.6 109 948 300
Limit 2400 45.3 216 11.7 3.0 505 8.1 Limit 2400 61 .356 3.1 106 941 286
Curve: 4 2000 41.3 217 10.7 2.6 471 6.7 Curve: 4 2000 55 .357 2.8 92 879 236
1600 34.3 235 9.6 2.2 473 5.8 1600 46 .387 2.5 78 884 205
1200 25.2 243 7.3 1.9 415 4.5 1200 34 .399 1.9 67 780 159
1000 20.3 250 6.1 1.7 380 3.8 1000 27 .411 1.6 60 715 134
Max 2600 47.0 241 13.5 3.1 509 8.5 Max 2600 63 .396 3.6 109 948 300
Power 2400 45.3 216 11.7 3.0 505 8.1 Power 2400 61 .356 3.1 106 941 286
Curve: M 2000 41.3 217 10.7 2.6 471 6.7 Curve: M 2000 55 .357 2.8 92 879 236
1600 34.3 235 9.6 2.2 473 5.8 1600 46 .387 2.5 78 884 205
1200 25.2 243 7.3 1.9 415 4.5 1200 34 .399 1.9 67 780 159
1000 20.3 250 6.1 1.7 380 3.8 1000 27 .411 1.6 60 715 134
Prop 2600 47.0 241 13.5 3.1 509 8.5 Prop 2600 63 .396 3.6 109 948 300
Demand 2400 37.0 228 10.1 3.0 505 7.3 Demand 2400 50 .375 2.7 106 941 258
Curve: P 2200 28.5 223 7.6 2.8 451 5.9 Curve: P 2200 38 .367 2.0 99 844 208
2000 21.4 232 5.9 2.7 471 5.0 2000 29 .381 1.6 95 879 176
1800 15.6 247 4.6 2.5 480 4.3 1800 21 .406 1.2 88 896 152
1600 11.0 279 3.6 2.3 473 3.9 1600 15 .459 1.0 81 884 138
1400 7.3 336 2.9 2.1 443 3.2 1400 10 .552 0.8 74 829 113
1200 4.6 385 2.1 1.9 415 3.1 1200 6 .634 0.6 67 780 109
1000 2.7 374 1.2 1.7 380 2.3 1000 4 .615 0.3 60 715 81
Performance data is calculated in accordance with tolerances and conditions stated in this specification sheet and is only intended for purposes
of comparison with other manufacturers’ engines. Actual engine performance may vary according to the particular application of the engine and
operating conditions beyond Caterpillar’s control.
TMI Reference No.: DM6321-00 (4-12-01)
Materials and specifications are subject to change without notice. The International System of Units (SI) is used in this publication.
LEHM1270-01 (4-01) Printed in U.S.A. ©2001 Caterpillar
All rights reserved.