Professional Documents
Culture Documents
LE24M600CF
LE28M500C
LE28M600C
LE32M600C
Please read this manual carefully before operating the unit,and keep it for
future reference.
01 Safety Warnings
Welcome 2 Audio MENU 21
Important Information 2 Clock MENU 22
Safety notice 3 SETUP MENU 22
Warning and cautions 4 LOCK MENU 22
EPG Menu(Electronic Program Guide) 23
02 Introduction PVR File System(only for DTV) 23
Main Parameter 5 Prepare to record the program 24
Base Stand Assembly Instruction 7 Record the program 24
Wall Mounting Installation Guidelines 8 Play the recording 24
Front Control Panel 10 Time shift 25
Rear/Side Sockets 11 USB Player 26
Connecting to your Haier TV 12
Common Interface 15 05 Trouble shooting
Trouble shooting 28
03 Remote Control
06 Specification
Remote Control 16
Teletext 17 Specification 31
04 Operation
Installation Guide 18
CHANNEL MENU 18
Auto Tuning (DVB-T ) 18
Auto Tuning (DVB-C) 19
DTV Manual Tuning (DVB-T ) 20
DTV Manual Tuning (DVB-C) 20
ATV Manual Tuning 20
Program edit 20
Common Interface 21
Signal Information 21
Software Updated(USB) 21
PICTURE MENU 21
01 Safety warnings
Thanks for buying this 22"/24"/28"/32" LED LCD TV.This guide will help you set up and begin using your TV.
22" FULL HD 1080P Digital LED LCD TV 24" FULL HD 1080P Digital LED LCD TV
Remote control Remote control
AAA battery x2 AAA battery x2
Instruction Manual Instruction Manual
Quick start guide Quick start guide
Warranty Card Warranty Card
Screws Screws
Stand Stand
28" HD Ready Digital LED LCD TV 32" HD Ready Digital LED LCD TV
Remote control Remote control
AAA battery x2 AAA battery x2
Instruction Manual Instruction Manual
Quick start guide Quick start guide
Warranty Card YPbPr Connect Cable
Screws Warranty Card
Stand Screws
Stand
IMPORTANT INFORMATION
READ ALL INSTRUCTIONS BEFORE USE AND KEEP FOR FUTURE REFERENCE.
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE.
FOR ANY PROBLEMS, REFER SERVICING TO THE CUSTOMER HELP LINE. THERE IS A LIGHTNING ARROW SYMBOL IN
THE TRIANGLE: THIS SYMBOL INDICATES HIGH VOLTAGE IS PRESENT INSIDE. IT IS DANGEROUS TO MAKE ANY KIND OF
CONTACT WITH ANYINSIDE PART OF THIS PRODUCT.
THERE IS A EXCLAMATION MARK IN THE TRIANGLE: THIS SYMBOL ALERTS YOU THAT IMPORTANT LITERATURE
CONCERNING OPERATION AND MAINTENANCE HAS BEEN INCLUDED WITH THIS PRODUCT.
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK AND FIRE, DO NOT PUT THE TV SET NEAR
SOURCES OF HUMIDITY. DO NOT USE ANY ABRASIVE CLEANERS WHICH MAY SCRATCH OR DAMAGE
THE LCD SCREEN. AVOID CONTACT WITH OBJECTS THAT MAY SCRATCH THE LCD SCREEN.
NOTE: SERVICING THE UNIT YOURSELF IS UNAUTHORISED AND COULD LEAD TO INJURY OR PRODUCT
DAMAGE. REFER ALL SERVICING TO THE CUSTOMER HELPLINE.
Safety notice
EN-3
WARNING AND CAUTIONS
Warning Caution
High voltages are used in the operation of this Do not trap the power supply cord under the
television receiver. Do not remove the cabinet television receiver.
back from your set. Refer servicing to qualified
service personnel.
Caution
Never stand on, lean on, or suddenly push the
Warning television or its stand. You should pay special
To prevent fire or electrical shock hazard, do attention to children. Serious injury may result if
not expose the television receiver to rain or it should fall.
moisture.
Caution
Do not place your television on an unstable cart,
stand, shelf or table. Serious injury to an
individual , and damage to the television, may
result if it should fall.
Warning
Do not drop or push objects into the
television cabinet slots or openings. Never
spill any kind of liquid on the television
receiver. Caution
When the television receiver is not used for an
extended period of time, it is advisable to
disconnect the AC power cord from the AC
outlet.
Dim:515*320mm(不包括底座)
Caution
Caution If the television is to be built into a compartment
Do not block the ventilation holes in the back or similar enclosure, the minimum distances must
cover. Adequate ventilation is essential to be maintained. Heat build-up can reduce the
prevent failure of electrical components. service life of your television, and can also be
dangerous.
EN-4
Introduction
02 Introdution
CAUTION INSTALLATION
Never tamper with any components inside the *Locate the TV in the room where light does
TV, or any other adjustment controls not not strike the screen directly.
described in this manual. All LED-TV's are high *Total darkness or a reflection on the picture
voltage electrical equipment.
screen can cause eyestrain. Soft and indirect
When you clean dust or any water drops off the
SCREEN or CABINET or around any of the lighting is recommended for comfortable
buttons or connectors, the power cabled should viewing.
be removed from the power socket. Wipe the TV *Allow enough space between the TV and the
with a soft, dry, dust free cloth. wall to permit ventilation.
During thunderstorms, unplug the power cable *Avoid excessively warm locations to prevent
and aerial / antenna cable to prevent damage to
possible damage to the cabinet or premature
your TV and any other devices connected to it.
All repairs to this TV should only be performed component failure.
by qualified TV service *Do not cover the ventilation openings when
personnel. using theTV.
Main features
1 Used as Television, display terminal, 4 NICAM;
PC display;
2 High luminance, wide viewing angle; 5 T ime-shift;
3 HDMI interface and SCART Interface;
Main parameter
Panel 22" 24" 28" 32"
TV System PAL-B/G , I , D/K
SECAM-B/G , D/K , L
DVB-T, DVB-C
Video Signal System PAL/SECAM/MPEG2/MPEG4/H.264
Storage channel number 1000(DTV);100(ATV)
Input Power Voltage AC 100 -240 V 50/60Hz
Power consumption 38W 40W 41W 50W
Standby Power consumption <0.30W
Audio Output Power (THD 7%) 2x3W 2x3W 2x8W 2x8W
Signal Input Analog RGB(PC) x1; PC audio x1
High-Definition Multimedia Interface (HDMI) x 2
Composite Input x 1
YPbPr x 1
SCART Input x 1
CI x 1
USB x 1
RF Co-Ax x 1
Headphone x 1
Signal output
COAXIAL x 1
SCART Output x 1
Horizontal definition (TV line) Composite video input >=350
YPbPr >=400
EN-5
Introduction
PC
SUPPORTED MODE
1 640x480 60 31.47
2 800x600 60 37.88
3 1024x768 60 48.36
4 1366x768 60 47.7
5 1280x1024 60 63.98
6 1920x1080
60 66.64
(only for 22",24")
EN-6
Introduction
(22",24")
(28")
(32")
INSTALLATION NOTES
Locate the TV in a room where light does not strike the screen directly. Total darkness or a
reflection on the screen can cause eyestrain. Soft and indirect lighting is recommended for
comfortable viewing.
Allow enough space between the TV and the wall to permit ventilation.
Please do not attempt to rotate the TV on the stand.
Avoid excessively warm locations to prevent possible damage to the cabinet or premature
component failure.
EN-7
Introduction
1.Place the LED LCD Television onto a solid surface. Please place some soft material over the front
of the screen to protect it from any damage.
(22",24")
(28")
(32")
EN-8
Introduction
2.Use the four screws provided to fix the TV onto a wall mounting bracket (not included)
via the four VESA standard holes on the back of the television.
100mm
M4X5 M4X5
100mm
M4X5 M4X5
(22",24")
200mm
M4X5 M4X5
100mm
M4X5 M4X5
(28")
200mm
M4X5 M4X5
100mm
M4X5 M4X5
(32")
EN-9
Introduction
SOURCE 1
2 1 MENU 2
CH+
3
CH-
VOL+
30 30
≤8m 4
VOL-
STANDBY 5
3
SOURCE 1
MENU 2
2 1 CH+
3
CH-
VOL+
4
VOL-
30 30
≤8m STANDBY 5
EN-10
Introduction
Rear/Side Sockets(22",24",28")
4
1 2 3 5
COMMON INTERFACE (CI)
USB HDMI2(ARC) HDMI1
6 7 8 9 10 11 12 13
AC-INPUT
100-240V~ 50/60Hz DIGITAL AUDIO OUTPUT
YPbPr VIDEO L R (COAXIAL) SCART
1 2 3 4 5 6
7 8 9 10 11 12 13 14
EN-11
Introduction
Amplifier
G B R
Y W R
Audio/Video machine
with HDMI interfaces
G Green (Y)
B Blue (Pb/Cb)
W White(AUDIO-L )
R Red (AUDIO-R, Pr/Cr)
Y Yellow (VIDEO)
EN-12
Introduction
G Green (Y)
B Blue (Pb/Cb)
W White(AUDIO-L )
R Red (AUDIO-R, Pr/Cr)
Y Yellow (VIDEO)
Amplifier
Y W R
AC-INPUT
100-240V~ 50/60Hz DIGITAL AUDIO OUTPUT
YPbPr VIDEO L R (COAXIAL) SCART
G B R
Audio/Video machine
with HDMI interfaces
EN-13
Introduction
Option 3 AV Audio Visual Note 3. When connecting any device to the USB
connection, keep the USB cable length as short
(Yellow/White/Red) as possible.
Make sure that both TV and the device are
switched off before connecting. Option 7 HEADPHONE OUTPUT
Connect the AV cables (not supplied) from
the Video (yellow) and Audio (white, red) Insert the plug of the earphone into the headphone
sockets on the TV to the DVD player or games socket on the TV. The TV speakers are now muted.
console etc. Alternatively you can also plug in external speakers if
To select the device connected with the required.
AV cable press the SOURCE button on the
remote and use the keys to select AV and Option 8 DIGITAL AUDIO OUT(COAXIAL)
press the OK button.
COAXIAL is a digital audio connection used to
Option 4 COMPONENT connect audio equipment, for example home
(Green/Blue/Red)+(White/Red) theatres and other digital HiFi systems over
short distances. The signal is transmitted over
Make sure that both TV and the device are either a coaxial cable with RCA connectors.
switched off before connecting. Make sure that both TV and the device are
switched off before connecting.
Connect the cables (not supplied) from the Connect the AV cables (not supplied) from
COMPONENT IN sockets Y, Pb, Pr (green, the COAXIAL socket on the TV to the Home Theater
blue, red) and L-Audio-R (white, red) on the TV sound system or digital HiFi system etc.
to the DVD player or games console etc.
EN-14
Introduction
COMMON INTERFACE
The common interface (CI) slot is designed to
accept the conditional Access (CA) Module and
Smart card in order to view the pay TV
programmes and additional services.
Contact your Common Interface service provider
to get more information about the modules and
subscription.
Please noted that CA modules and smart cards
are neither supplied nor optional accessories
from us.
CAM Removed
CAM Inserted
Auto Scan
Channel
Manual Scan
Picture Program Edit
Common Interface
Audio
Signal Information
Software Update(USB)
Clock
Setup
Lock
EN-15
Remote Control
03 Remote Control
SCREEN Press to change picture aspect ratio.
16 Press to open the on-screen menu.In teletext
mode,press to open the INDEX page.
17 Press to navigate the on-screen menu.
OK Press to confirm a selection.
EN-16
Remote Control
TELETEXT
Teletext is an information system broadcast by certain channels which can be consulted like
a newspaper. It also offers access to subtitles for viewers with hearing problems or who are
not familiar with the transmission language(cable networks, satellite channels, etc.)
E
Press: You will obtain:
This is used to call or exit teletext modes. The summary appears with a list
TEXT of items that can be accessed. Each item has a corresponding 3 digit page
number.
Enter the number of the page required using the 0 to 9 up/down. Example:
SELECTING A PAGE page 120, enter 120. The number is displayed top left, the counter turns and
then the page is displayed. Repeat this operation to view another page. If
the counter continues to search, this means that the page is not
transmitted. Select another number.
Coloured are as are displayed at the bottom of the screen. The 4 coloured
DIRECT ACCESS
TO THE ITEMS keys are used to access the items or corresponding pages. The coloured
areas flash when the item or the page is not yet available.
SUB CODE Press the button and enter the 4-digit number to enter a secondary page.
This will superimpose the teletext data on top of the TV picture. Press
MIX button again to return to full text.
EN-17
Operation
04 OPERATION
Start
In the UK to connect to cable TV you will require the
1).Press the ▼▲ buttons to navigate the menu and ◀▶buttons appropriate cable TV's company's 'set top box' to be
connected to the TV. Please refer to the cable TV's
to change the settings. Select your desired language ,Home/Shop
instructions manual for further details.
Mode to be displayed on the menu.
If you select DVB-C, you will select Full or Quick way to
HOME or Shop modes scan.Also you can select Auto Scan mode. DTV+ATV or
1.When the unit is turn on for the very first time, it will show DTV only, or ATV only.
Initialization set-up menu. After the OSD language is set, the
user can choose between "shop mode" and "home mode". 3). Channel tuning will commence. This operation
When the screen shows the following setting menu and the may take up to some minutes. The display will show
cursor stays on the "home mode" choice, press ◀▶ to adjust, the progress of the tuning and the number of
and "OK" to enter the menu. channels found.
4). If you want to skip the DTV tuning, press the
Select the usage mode? MENU button to interrupt the tuning half way.
shop mode is for shop usage only. You will then go straight to ATV tuning.
Shop mode Home mode 5). After tuning is complete, the channels are
arranged in a preset order. If you wish to skip channels,
If "Shop mode" is choosen, the following menu will displayed. modify the preset order or rename
channels, select Programme Edit under the
Are you sure to change to
Channel menu.
Shop mode?
OK Cancel
DTV Digital TV
Choose "OK" to enter the next prompt menu. ATV Analogue TV (not used in UK)
2). Press the ◀▶buttons to select AIR/Cable means DVB-T/DVB-C. 2). Press the ▼▲ buttons to select Auto Scan and then
press the OK button.
Setup Setup
Lock Lock
3). Press the ◀▶buttons to select Antenna Type to Air 1.2 )Auto Tuning (DVB-C)
means DVB-T. 1). Press the MENU button and then press the▼▲
Antenna Type Air
buttons to select the CHANNEL menu and then
Channel press the OK button.
Country Germany
Picture Mode DTV+ATV 2). Press the▼▲ buttons to select Auto Tuning and
Start then press the OK button,select Antenna Type to cable
Audio mean DVBC.
Setup
4). In Country mode, press the ◀▶buttons to select the
Lock
country where you will operate the TV.
MENU Return Move OK OK
5). In the Mode item, press the ◀▶buttons to select tune
3). Press the▼button and then press the◀▶▼▲buttons
mode: ATV / DTV / DTV + ATV. Press the▼button to select to select the country you will operate the TV.
Start to start. 4). In the Mode menu, press the◀▶buttons to select ATV /
DTV / DTV + ATV.
6). Channel tuning will commence. This operation may take
5). Select start to enter the menu as below, to select
up to some minutes. The display will show the progress of the search mode.
tuning and the number of channels found.
Quick
Channel
Full ▶
7). If you want to skip the DTV tuning, press the MENU Picture Advanced
8). After tuning is complete, the channels are arranged in a 6). Channel tuning will commence. This operation may
preset order. If you wish to skip channels, modify the preset take up to some minutes. The display will show the
progress of the tuning and the number of channels
order or rename channels, select Programme Edit under the found.
channel menu.
EN-19
Operation
7). If you want to skip the DTV tuning, press the MENU button to
interrupt the tuning half way. You will then go straight to Frequency 474000K
Channel
Symbol Rate 6875K
ATV tuning. You may repeat the above step if you also want to
Picture Modulation Auto
skip the ATV tuning. An installation reminder will appear the
Start
next time you turn on the TV,if no channel is found. Audio
8). After tuning is complete, the channels are arranged in a
Clock
preset order. If you wish to skip channels, modify the preset
order or rename channels, select Programme Edit under Setup
the channel menu.
Lock
All the channels including ATV, DTV and Radio MENU Return Move OK OK
can be tuning by one time,if the Tune Type is
DTV+ATV . 2). The DVB-C Manual Tuning screen will pop up.
Press the▼▲buttons to select(Frequency /Symbol
All the stored channels will be disappear after
(ks/s/QAM Type ),press OK to input Frequency and symbol,
auto tuning .
press ◀▶to change QAM type, press Start to commence
After auto tuning , the channel will skip to the search of that channel. When the signal has been
the first DTV channel. tuned, the picture and signal strength will be displayed
on the screen.
2. 1 )DTV Manual Tuning (DVB-T)
1). Press the MENU button and then press the▼▲
3). Press the MENU button to return back to the
buttons to select the CHANNEL menu and then
main menu.
press the OK button.
2). Press the▼▲ buttons to select DTV Manual Tuning 4). Press the EXIT button to exit the menu.
and then press the OK button,if you select Air in Auto
Scan, you will enter DVB-T manual scan menu.
3) ATV Manual tuning :
You can change the sound system, search the analog TV
Digital Scan Ch5
Channel channels and fine tune the channels , then storage the
Start
channels you selected.
Picture Strength 54
3). The DTV Manual Tuning screen will pop up. 1. Press teletext red button to storage to channels
Press the ◀▶ buttons to select the desired UHF channel after manual tuning .
or press the OK button then input channel number. Select 2. If the number save to is the same as the number
Start to commence the search of that channel. When the Current CH, when you press Red button,the save to
signal has been tuned, the picture and signal strength will number will cover the Current CH number.
be displayed on the screen.
4). Program edit:
4). Press the MENU button to return back to the
main menu. Press the ▲or▼ Buttons to select Program Edit in the
Channel Menu. Then press the OK Button to enter the sub-
5). Press the EXIT button to exit the menu. Menu. Then you will need to select the program you wish
to edit.
2. 2 )DTV Manual Tuning (DVB-C)
1). Press the MENU button and then press the▼▲
buttons to select the CHANNEL menu and then
press the OK button.If you select Cable in Auto scan,you
will enter DVBC manual scan menu.
EN-20
Operation
FAV: Press the FAV Button (instead of color Buttons) to set Sound Mode Standard
Channel
the favourite channel. (If you want to view the Favorite Treble 0
Channel List you need to exit Program Edit Menu and then Picture Bass 0
EN-21
Operation
4.CLOCK MENU
PVR Settings
The fourth item of the menu is the CLOCK MENU Move Left
You can adjust the clock, power on/off time,
Move Right
sleep timer etc .Press ▼▲ to move, press OK
to adjust. OK Select
standby. To override the automatic shutdown press any The default pass word is 0000, If you forget the
button on the remote control. password, you can use the super password:9443.
2. To cancel the automatic power-down Channel Locks: Press ▼▲ to choose the
On the Option Menu select Auto standby(4hr),The TV program ,press OK button to block
screen returns to the Option Menu and Auto standby the program. If you want unblock the program,
(4hr) option will display. pls enter the main menu , input the password,choose
Auto standby (4hr) OFF
the program,then press OK button again.
To return to auto shutdown after 4 hours repeat the Parental Rating: Press ◀▶to choose rating.
above except use the left arrow key to select on(4 hours).
In PVR File system menu you can set up USB
disk for PVR.
EN-22
Operation
channel and then press the ◄ or ► Buttons. To exit the Schedule List OK
EPG Menu, press the EPG or EXIT Button. Press it (Service) You may press Red button to view the scheduled programs
again to return. list. Also you may delete the programs you have scheduled.
INFO (Green Button)
Please refer to the bottom of the EPG screen In the EPG Menu, press the GREEN Button to view more
for the basic remote control key functions. information about the current program.
Record
8.PVR File System (only for DTV)
In EPG mode, press the Red Button on the remote control
Press Menu Key,select setup submenu.Press the ▼ or ▲
to select a program to be recorded. You will then enter Buttons to select PVR File System, then press the OK
Scheduled Record menu for record setting. (Refer to the Button to enter sub-Menu and then use the ◄ or ►
Buttons to scroll through the options.
section of PVR file system.)
EN-23
Operation
File Manager: You may view all the recorded MENU Return
EXIT Exit
programs here. Press blue key to play with full
screen. Record the program:
File Manager
Scheduled Record
Sched
Standby
To record the program you are currently watching press the
REC Button and a red REC icon will appear on the screen.
UKTV Br’tldeas_Good Food Bites_20041119_161021.ts
The record time/ length and remaining record time will be
BBC ONE_Olympics 2012_20120808_114427.ts
Function
UKTV Br’tldeas_Good Food Bites_20041119_162019.ts
displayed in the menu below.
Play
Delete One
Current Playing File Into Recording
EXIT Delete All
Channel Name BBC ONE
Zoom
Hot Key Program Name Olympics 2012 Recorded Time : 00 : 00 : 40
Move Up
Available Time : 25 Minute
Recorded Time 2012/08/09 11:44
Move Down
OK
EXIT Select Total Time 00:08:06
To reveal the menu press the REC Button again.
MENU Return
EXIT Exit
Description Matt Baker and Clare Balding
present coverage of the eager... To stop recording, press the Stop Button.
You may also enter the Media Player Menu to view your
Device List: This sub menu will list the USB devices recorded programs via Movie mode.
connected to the TV set. You can select the device and
Play the recording:
then press red button to format the USB device.
The program recorded on the “USB”will be
saved in the folder “USB record” on the
Device List
Device Available Space File System
device.
sda1 192 MB FAT32 You can play it in PVR File System and in File manager
submenu.
Function
Format 1.The USB storage size can be between
Hot key 128MB and 500GB in size, but for practical use 2GB to
Move Up
Move Down
500GB is recommended.
OK
EXIT Select 2. Video may become pixelated when Video
MENU Return bit rate is too low. This can be caused by connecting a
EXIT Exit USB extension cable instead of plugging the USB directly
into the TV.
Scheduled Record: You may set the scheduled record 3. Not all USB devices are compatible.
List here. And you may also delete the scheduled records
you have set.
Scheduled Record Setting List
Scheduled Record
Sched
Standby
Enter the sub menu you may set the recording frequency
as Once, Daily, Weekly, Weekday, or off.
EN-24
Operation
00:00:05
Available Time
Play Pause Stop FB FF 00:00:00/04:13:20
EN-25
Operation
10.USB Player
Press source key, and select USB in source list, press OK button to enter the USB menu.
Please make sure that the USB device have plugged in the slot.There are four type media item can be selected, such as
photo, music, Movie, and text. Select the type media item by pressing ◄► , press OK button to enter the disk selection menu.
Haier Innovation Life
Press the▼/▲to select the right disk and folder,press OK to enter the media files list . Press Red button to back to the
media type selection menu.
Select the media file by pressing ◄► or▼ ▲ , then the preview frame will pop up.Press the ► button to play the media file
in full screen.When the movie file is playing,press the ▼ button can display the control bar.
Photo
USB1/Pic
PHOTO
Basic Function
When photos are playing, press “ ▼”key on the remote control, a help bar will display under the
screen.
Press Blue key, you can enter Quick Menu to adjust Interval time,Repeat,slideshow effect,
Quick Menu
and Background Music(you may play music first).
EN-26
Operation
Music
USB1/Music
.. 1/1 Title:
Album:
10547672.mp3 Artist:
Track
14953359.mp3 Year: 2010-09-30
1/2
10547672
PLAY
00:00:53 00:00:00
MUSIC
When music are playing, press “►” key to select toolbar.
Basic Function
MOVIE
The operations are similar to the ”PHOTO”.Please refer to ”PHOTO” options.
Basic Function
TEXT
Press”▼ /▲” to select previous / next page, Input the number key and OK to jump to the page you want.
Provide list of major file types that play from a USB device
EN-27
Trouble Shooting
05 Trouble shooting
electronic equipment,car/
Interference Noise motorcycle,fluorescent light
Volume(check if mute is
Normal Picture Mute activated or if the audio system
connections are not correct)
No colour TVsystem
Noise
EN-28
Trouble Shooting
Trouble Shooting
Most PC's and laptops when connected with a VGA Plug (the
My TV does not display the picture
blue 15 pin plug on your PC or laptop) require you to press
on my laptop / PC when connected. some buttons on your key board to get a picture on a TV or
other external display. This is usually the F7 (Dell) or F4 (HP /
Samsung) or F5 (Toshiba). On laptops, you have to press the
“Fn” key at the same time as the “F” key.
The picture is not auto resizing Check that the TV picture Aspect Ratio is set to 'Auto' on all
when changing channels. inputs ATV, DTV, SCART, HDMI 1, 2 etc.
To set the aspect ratio, (Auto, 4:3 or 16:9). Press Source button
start at ATV and repeat the sequence below for all input
sources ATV, DTV, SCART, HDMI 1 and 2 as each input source is
controlled separately.
Press TV Menu button
Press Right Arrow to access Picture sub menu
Press Down Arrow to select Aspect Ratio
Select Auto
Press Exit
Repeat for all input sources.
I have just plugged in a DVD player This is applicable to any item of equipment plugged to the TV
or another item into my TV and it 1. Turn both TV & DVD player off (plugs out of the wall socket,
doesn't work. not standby).
2. Turn off any equipment connected to the SCART socket.
3. Disconnect the SCART plug from the TV.
4. Plug in and turn TV on
5. Plug in and turn DVD player on
6. Select HDMI from Source Menu
7. Press play on DVD player and check movie plays ok
NOTE: The SCART socket has priority over HDMI and it is
important that the equipment connected to the SCART socket
on the TV is switched OFF (not in standby).
Please follow this information. If the advice works and the
DVD player works, the TV is OK it is just a bit confused.
Probably HDMI plugs have been removed and plugged back in
when the TV is switched on.
Never remove or plug in HDMI cables or any digital equipment
with the equipment switched on.
Always switch off all equipment when unplugging or
connecting any digital equipment.
EN-29
Trouble Shooting
TV Aerials
Digital terrestrial television (Freeview) comes to your TV via an aerial, The old aerial that was good for analogue TV may
not work well for digital so may need upgrading. If you are getting some but not all of the digital channels on DTV
(Freeview) for example you get BBC1, BBC2, Channel 4 ,but not ITV or Channel 5, this is usually because your aerial is a
narrow band type, and needs to be changed to a wide band type.
Faulty Leads and Cables
Check your TV. Are the leads at the back - to the mains, the aerial, the set-top box, the video or DVD player or recorder
properly connected? SCART leads are known to work loose over time and can result in both audio and video (picture)
problems. Either left or right or both audio is missing and the colours are poor or muddy looking. Push the SCART
plugs firmly in, this should fix the problem.
HDMI plugs need to be pushed in firmly; it's only the last millimetre that the contacts make. Typically the black plastic
part of the HDMI plug should be very close or touching the body of the TV or component.
When plugging in any HDMI cables you may experience problems if the HDMI cables are plugged in when the TV or the
other component is switched on. Always switch off both the TV and the component you are plugging in. If you have
checked the plugs and sockets, switch off the TV and whatever you have plugged in to the TV and then switch them on
again.
EN-30
Specification
06 Specification
22" FULL HD 1080p Digital LED LCD TV
FULL HD
Television picture quality: Integrated digital.
Screen Size: 55cm
Resolution 1920x1080 pixels 50Hz.
DVB-T, DVB-C
DTV Tuner Decorder 16/32/64/128/256 QAM modulation/QPSK Modulation
MPEG2,MPEG4,H.264
2 HDMI sockets.
1 SCART socket.
PC input socket.
Component video socket.
Composite.
1 USB port.
1 Headphone port.
Connectivity: 1 COAXIAL port.
Supported Systems:PAL+SECAM
Storage channel number: 1000(DTV),100(ATV)
TV(RF):75Ω Imbalance
AV Video-Input:75Ω,1V-P,RCA
AV Audio-Input:20KΩ,500mB RMS
YPbPr/HDMI Video Input:480i, 480p, 576i, 576p, 720p, 1080i, 1080p
EN-31
Specification
Specification
24" FULL HD 1080p Digital LED LCD TV
FULL HD
Television picture quality: Integrated digital.
Screen Size: 59.9cm
Resolution 1920x1080 pixels 50Hz.
DVB-T, DVB-C
DTV Tuner Decorder 16/32/64/128/256 QAM modulation/QPSK Modulation
MPEG2,MPEG4,H.264
2 HDMI sockets.
1 SCART socket.
PC input socket.
Component video socket.
Composite.
1 USB port.
1 Headphone port.
Connectivity: 1 COAXIAL port.
Supported Systems:PAL+SECAM
Storage channel number: 1000(DTV),100(ATV)
TV(RF):75Ω Imbalance
AV Video-Input:75Ω,1V-P,RCA
AV Audio-Input:20KΩ,500mB RMS
YPbPr/HDMI Video Input:480i, 480p, 576i, 576p, 720p, 1080i, 1080p
EN-32
Specification
Specification
28" HD Ready Digital LED LCD TV
HD Ready
Television picture quality: Integrated digital.
Screen Size: 70 cm
Resolution 1366x768 pixels 50Hz.
DVB-T, DVB-C
DTV Tuner Decorder 16/32/64/128/256 QAM modulation/QPSK Modulation
MPEG2,MPEG4,H.264
2 HDMI sockets.
1 SCART socket.
PC input socket.
Component video socket.
Composite.
1 USB port.
1 Headphone port.
Connectivity: 1 COAXIAL port.
Supported Systems:PAL+SECAM
Storage channel number: 1000(DTV),100(ATV)
TV(RF):75Ω Imbalance
AV Video-Input:75Ω,1V-P,RCA
AV Audio-Input:20KΩ,500mB RMS
YPbPr/HDMI Video Input:480i, 480p, 576i, 576p, 720p, 1080i, 1080p
EN-33
Specifiction
Specification
32" HD Ready Digital LED LCD TV
HD Ready
Television picture quality: Integrated digital.
Screen Size: 81cm
Resolution 1366x768 pixels 50Hz.
DVB-T, DVB-C
DTV Tuner Decorder 16/32/64/128/256 QAM modulation/QPSK Modulation
MPEG2,MPEG4,H.264
2 HDMI sockets.
1 SCART socket.
PC input socket.
Component video socket.
Composite.
1 USB port.
1 Headphone port.
Connectivity: 1 COAXIAL port.
Supported Systems:PAL+SECAM
Storage channel number: 1000(DTV),100(ATV)
TV(RF):75Ω Imbalance
AV Video-Input:75Ω,1V-P,RCA
AV Audio-Input:20KΩ,500mB RMS
YPbPr/HDMI Video Input:480i, 480p, 576i, 576p, 720p, 1080i, 1080p
EN-34
LCD-Fernseher mit LED-Hintergrundbeleuchtung
LE22M600CF
LE24M600CF
LE28M500C
LE28M600C
LE32M600C
Inhaltsverzeichnis
01 Sicherheits- und Warnhinweise Bildmenü 21
Willkommen 2 Tonmenü 21
Wichtige Informationen 2 Zeitmenü 22
Sicherheitshinweise 3 Einstellungsmenü 22
Warnhinweise 4 SPERRMENÜ 22
EPG-Menü (Elektronische Programmzeitschrift) 23
02 Einleitung PVR-Dateisystem (nur DTV) 23
Parameter 5 Vorbereitung der Aufnahme 24
Standfuß montieren 7 Programm aufzeichnen 24
Wandmontage 8 Aufnahme abspielen 24
Seitliches Bedienfeld 10 TimeShift 25
TV-Anschlussfeld 11 USB-Media-Player 26
Fernseher anschließen 12 HOTEL-MODUS 28
Common Interface 15
03 Fernbedienung 05 Störungserkennung
Fernbedienung 16 Störungserkennung 30
VIDEOTEXT 17
06 Spezifikationen
04 Bedienungshinweise Spezifikationen 33
Installation 18
KANALMENÜ 18
Automatischer Kanalsuchlauf (DVB-T ) 18
Automatischer Kanalsuchlauf (DVB-C) 19
DTV Manueller Kanalsuchlauf (DVB-T ) 20
DTV Manueller Kanalsuchlauf (DVB-C) 20
ATV Manueller Kanalsuchlauf 20
Kanal bearbeiten 20
Common Interface 21
Signalinformationen 21
Softwareaktualisierung (USB) 21
WICHTIGE INFORMATIONEN
LESEN SIE VOR DER VERWENDUNG DIE GESAMTE ANLEITUNG DURCH, UND BEWAHREN SIE SIE ZUR
SPÄTEREN VERWENDUNG AUF.
VORSICHT
STROMSCHLAGGEFAHR
NICHT ÖFFNEN
ZUR VERMEIDUNG VON STROMSCHLÄGEN ÖFFNEN SIE DAS GERÄTEGEHÄUSE NICHT. ES BEFINDEN SICH
KEINE VOM VERBRAUCHER WARTBAREN TEILE IM INNEREN DES GERÄTS. WENDEN SIE SICH MIT
PROBLEMEN UND FRAGEN ZUR WARTUNG AN DEN KUNDENDIENST.
DER BLITZ IM GLEICHSEITIGEN DREIECK BEDEUTET, DASS IM GERÄT HOCHSPANNUNGSGEFAHR BESTEHT.
DAS AUSRUFUNGSZEICHEN IM GLEICHSEITIGEN DREIECK BEDEUTET, DASS WICHTIGE WARTUNGS- UND
BEDIENUNGSHINWEISE IN DER BEDIENUNGSANLEITUNG GEFUNDEN WERDEN.
VORSICHT: ZUR VERMEIDUNG VON STROMSCHLAG UND FEUER SETZEN SIE DEN FERNSEHER
KEINER FEUCHTIGKEIT AUS. REINIGEN SIE DAS GERÄT UND DEN BILDSCHIRM NICHT MIT
SCHEUERMITTELN; DAS FÜHRT ZU KRATZERN.
BITTE BEACHTEN SIE: REPARIEREN SIE DAS GERÄT NICHT SELBST, DAS KANN ZU
VERLETZUNGEN UND SCHÄDEN AM GERÄT FÜHREN. WENDEN SIE SICH MIT WARTUNGS-
UND REPARATURARBEITEN STETS AN DEN AUTORISIERTEN KUNDENDIENST.
SICHERHEITSHINWEISE
Warnung: Zur Vermeidung von Feuer und
Stromschlag öffnen Sie nicht das
Gerätegehäuse. Es befinden sich keine vom
Verbraucher wartbaren Teile im Innern des
Gerätes. Wenden Sie sich mit Wartungs- und
Reparaturarbeiten stets an den autorisierten
Kundendienst.
Dieses Symbol zeigt an, dass das Gerät nicht mit
Warnung: Zur Vermeidung von Feuer und dem Hausmüll entsorgt werden darf. Zur
Stromschlag setzen Sie das Gerät nicht Regen Vermeidung von Gesundheits- und
oder Feuchtigkeit aus. Umweltschäden durch unkontrollierte
Entsorgung muss das Gerät recycelt werden.
Setzen Sie Netzteil und Gerät nicht Spritzwasser Geben Sie das Gerät bitte an einer Sammelstelle
oder Tropfwasser aus und stellen Sie keine mit für Elektroaltgeräte ab oder wenden Sie sich an
Wasser gefüllten Gegenstände (wie Vasen) auf Ihren Fachhändler.
dem Gerät ab.
WARNHINWEISE
De
Warnung Vorsicht
Dieser Fernseher wird mit Hochspannung Klemmen Sie das Netzkabel nicht unter dem
betrieben. Öffnen Sie nicht das Gerätegehäuse. Fernseher ein.
Wenden Sie sich mit Wartungs- und
Reparaturarbeiten stets an den autorisierten
Kundendienst.
Vorsicht
Stehen Sie nicht auf dem Fernseher, lehnen Sie
sich nicht gegen den Fernseher, stoßen Sie ihn
Warnung nicht an. Achten Sie auch besonders auf Kinder.
Zur Vermeidung von Feuer und Stromschlag Der Fernseher kann schwere Verletzungen und
setzen Sie das Gerät nicht Regen oder Schäden verursachen, wenn er umfällt.
Feuchtigkeit aus.
Vorsicht
Stellen Sie das Gerät nicht auf einem unstabilen
Wagen, Aufsteller, Stativ, Tisch oder einer
Halterung ab. Es kann herunterfallen und
Verletzungen und Schäden verursachen.
Warnung
Führen Sie keine Fremdkörper in das Gerät
ein, stoßen Sie es nicht stark an. Verschütten
Sie keine Flüssigkeiten auf Ihrem Fernseher.
Vorsicht
Bei längerer Nichtbenutzung des Fernsehers
ziehen Sie bitte das Netzkabel ab.
Mindestabstände
Dim:515*320mm(不包括底座)
Vorsicht
Vorsicht Wird der Fernseher eingebaut, so achten Sie bitte
Blockieren Sie nicht die auf die Mindestabstände. Hitzestau kann die
Ventilationsöffnungen, sie werden zur Lebensdauer Ihres Fernsehers verkürzen und ist
Belüftung benötigt. gefährlich.
02 Einleitung
ACHTUNG INSTALLATION
Machen Sie sich nicht an Bauteilen im Fernsehgerät * Stellen Sie den Fernseher vor direkter
oder an irgendwelchen anderen
Einstellungssteuerungen zu schaffen, die nicht in Sonneneinstrahlung geschützt auf.
diesem Handbuch beschrieben sind. Alle LED- * Dunkelheit und Reflektionen auf dem
Fernsehgeräte sind elektrische Bildschirm können zu einer Überforderung
Hochspannungsgeräte.
Wenn Sie Staub oder Wassertropfen von dem der Augen führen. Weiche und indirekte
Bildschirm oder dem Gehäuse oder um die Knöpfe Beleuchtung wird für komfortables
oder Anschlüsse herum abwischen, sollte das Fernsehen empfohlen.
Stromkabel aus der Steckdose aus gesteckt sein.
Wischen Sie das Fernsehgerät mit einem weichen, * Lassen Sie auf der Rückseite des Fernsehers
trockenen, staubfreien Tuch ab. ausreichend Platz zur Ventilation.
Trennen Sie während Gewittern das Stromkabel und * Vermeiden Sie besonders warme Standorte,
das Antennenkabel, um Schäden an Ihrem
Fernsehgerät und anderen angeschlossenen Geräten um einen Hitzestau im Gerät und vorzeitige
zu vermeiden. Schäden zu vermeiden.
Alle Reparaturen sollten nur von qualifiziertem * Decken Sie die Lüftungsöffnungen während
Fernsehgeräte Servicepersonal durchgeführt werden.
des Betriebs nicht ab.
Ausstattungsmerkmale
1 Nutzbar als Fernseher oder PC-Monitor 4 NICAM;
PC
UNTERSTÜTZTER MODUS
De
Auflösung V. Freq. (Hz) H. Freq. (KHz)
1 640x480 60 31.47
2 800x600 60 37.88
3 1024x768 60 48.36
4 1366x768 60 47.7
5 1280x1024 60 63.98
1920x1080
6 (nur für 22”, 24”) 60 66.64
(22",24")
(28")
(32")
HINWEISE ZUR INSTALLATION
Stellen Sie den Fernseher vor direkter Sonneneinstrahlung geschützt auf. Dunkelheit und Reflektionen auf
dem Bildschirm können zu einer Überforderung der Augen führen. Weiche und indirekte Beleuchtung wird
für komfortables Fernsehen empfohlen. Lassen Sie auf der Rückseite des Fernsehers ausreichend Platz zur
Ventilation.
Hinweis: Der TV-Standfuß ist nicht schwenkbar.Vermeiden Sie besonders warme Standorte, um einen
Hitzestau im Gerät und vorzeitige Schäden zu vermeiden.
WANDMONTAGE
Dieser Fernseher kann wie folgt an der Wand montiert werden:
1.Place the LED LCD Television onto a solid surface. Please place some soft material over the front
of the screen to protect it from any damage.
De
(22",24")
(28")
(32")
2.Schrauben Sie den Fernseher mit vier vorgesehenen Schrauben an eine VESA-Wandhalterung
(beides nicht mitgeliefert).
100mm
M4X5 M4X5
100mm
M4X5 M4X5
(22",24")
200mm
M4X5 M4X5
100mm
M4X5 M4X5
(28")
200mm
M4X5 M4X5
100mm
M4X5 M4X5
(32")
Seitliches Bedienfeld(22",24",28")
SOURCE 1
2 1 MENU 2 De
CH+
3
CH-
VOL+
30 30
≤8m 4
VOL-
STANDBY 5
Seitliches Bedienfeld(32")
3
SOURCE 1
MENU 2
2 1 CH+
3
CH-
VOL+
4
VOL-
30 30
≤8m STANDBY 5
TV-Anschlussfeld(22",24",28")
4
1 2 3 5
COMMON INTERFACE (CI)
USB HDMI2(ARC) HDMI1
6 7 8 9 10 11 12 13
TV-Anschlussfeld(32")
AC-INPUT
100-240V~ 50/60Hz DIGITAL AUDIO OUTPUT
YPbPr VIDEO L R (COAXIAL) SCART
1 2 3 4 5 6
7 8 9 10 11 12 13 14
Verstärker
De
G B R
Y W R
CVBS, DVD-Player oder anderes
Gerät mit CVBS/S-Video
Audio/Video Gerät
mit HDMI
G Grün (Y)
B Blau (Pb/Cb)
W Weiß (AUDIO-L )
R Rot (AUDIO-R, Pr/Cr)
Y Gelb (VIDEO)
Verstärker
Y W R
AC-INPUT
100-240V~ 50/60Hz DIGITAL AUDIO OUTPUT
YPbPr VIDEO L R (COAXIAL) SCART
G B R
Audio/Video Gerät
mit HDMI
COMMON INTERFACE
Der Schacht Common Interface (CI) dient der Detaillierte Informationen zur benutzten CI-
Aufnahme des Conditional Access Moduls (CAM) Karte werden angezeigt.
und der SmartCard für Bezahlsender. Bitte Drücken Sie OK, um das Kartenmenü
wenden Sie sich an Ihren Dienstanbieter für aufzurufen. Finden Sie detaillierte Anleitungen
weitere Informationen. Bitte beachten Sie, dass in der Bedienungsanleitung des Moduls.
CI-Module und SmartCards von uns nicht
geliefert werden. Nach dem Abziehen des Moduls wird die
nachstehende Meldung angezeigt.
Warnung
Schalten Sie den Fernseher aus, bevor Sie das CAM entfernt
Modul in den Common Interface Schacht
einschieben.
CI-Schacht
CI-Modul
SmartCard
CAM gefunden
Autom. Suchlauf
Kanal
Manueller Suchlauf
Bild Kanäle bearbeiten
Kartenschnittstelle CI
Audio Signal-Informationen
Software Update(USB)
Uhr
Konfiguration
Sperre
03 Fernbedienung
SCREEN Bildformat umschalten.
16 Bildschirmmenü anzeigen. Im Videotextmodus
Index-Seite öffnen.
17 Navigation im Bildschirmmenü.
OK Auswahl bestätigen. De
Im Videotextmodus Mischmodus aufrufen.
VIDEOTEXT
Videotext ist ein Informationssystem, das von einigen Sendern übertragen wird und wie eine
Zeitung aufgebaut ist. Hier haben Sie ebenfalls Untertitel für Hörgeschädigte
(Kabelnetzwerke, Satellitenkanäle usw.).
E
Drücken Sie: Sie haben folgende Funktion:
Mit dieser Taste rufen Sie den Videotext auf oder Sie verlassen ihn. Eine
TEXT Liste mit Menüpunkten wird angezeigt. Jede Seite hat eine 3-stellige
Nummer.
Mit 0 bis 9 und den Navigationstasten aufwärts/abwärts rufen Sie die Seite
SEITE WÄHLEN auf. Beispiel: Für Seite 120 geben Sie 1-2-0 ein. Die Nummer wird oben links
im Bild angezeigt. Zum Aufrufen einer neuen Seite geben Sie die
entsprechende Nummer ein. Ist die gewählte Seite nicht vorhanden, so
läuft die Seitenzahl weiter.
UNTERSEITEN DIREKT Die Farbtasten entsprechen den Farbmarkierungen unten auf der Seite
AUFRUFEN und dienen als Schnelltasten zum Aufrufen. Der farbige Bereich blinkt,
wenn die Seite noch nicht zur Verfügung steht.
UNTERCODE Drücken Sie die Taste und geben Sie den 4-stelligen Code zum Aufrufen
einer Unterseite ein.
HOLD Mit dieser Taste halten Sie eine Seite, sie wird nicht umgeblättert.
04 BEDIENUNGSHINWEISE
Installation Ersteinrichtung
Beim ersten Einschalten des Fernsehers oder nach der
Rückstellung zu den Werkseinstellungen wird das Menü zur Menü-Sprache Deutsch
3). Im Kanalmenü können Sie den Empfangstuner 1.2 )Automatische Kanalsuche (DVB-C)
(Antenna Type) mittels◄►auswählen. Wählen Sie für 1).Drücken Sie MENU und verwenden Sie ▼▲ zur
Antennenempfang DVB-T (Air). Selektierung des Menü punkts Kanal (Channel), dann
drücken Sie OK.
Kanal Antennenart Air
Land Deutschland
2).Selektieren Sie mit ▼▲ den automatischen Suchlauf,
Bild Modus DTV+ATV dann drücken Sie OK. Wählen Sie als Empfangstuner
Starten (Antenna Type) Kabel (DVB-C / Cable).
Audio
DTV / DTV + ATV. Drücken Sie ▼ um Suchlauf zu starten. MENU Zurück Auswählen OK OK
6).Kanalsuche beginnt. Dies kann bis zu einige Minuten 3). Drücken Sie ▼ und dann ◄►▼▲ zur Auswahl Ihres
Landes.
dauern. In der Anzeige sehen Sie den Fortschritt der Suche
4). Drücken Sie ◄► zur Auswahl von ATV / DTV / DTV +
und die Anzahl der gefundenen Kanäle. ATV.
7).Zum Überspringen der DTV-Kanalsuche drücken Sie 5). Wählen Sie Start, um das nachstehende Menü aufzurufen,
hier wählen Sie den Suchmodus.
MENU. Damit gelangen Sie direkt zur ATV-Kanalsuche.
Schnell
Wiederholen Sie den obigen Schritt, wenn Sie auch die Kanal
Vollbild
ATV-Kanalsuche überspringen möchten. Sie werden beim Bild Erweitert
Programmführer
Programmerinnerung einzustellen. Das nachstehende
001 Nine Digital Erinnerungsmenü wird angezeigt und mit ◄ oder ►
01:00-02: 00 NINE MORNING NEWS stellen Sie die Erinnerung ein. Die Erinnerung kann einmal,
02:00 -03:00 THE ELLEN DEGENERES S...
täglich oder wöchentlich eingestellt werden.
03:00 - 04:00 THE VIEW
04:00-05:00 DAYS OF OUR LIVES 17:03 19/11/2004
Hinweis
INFO (grüne Taste)
Unten im EPG-Menü werden die Tastenfunktionen
Im EPG-Menü drücken Sie die grüne Taste, um weitere
angezeigt. Informationen zum aktuellen Programm anzuzeigen.
EXIT
Zurück
Beenden
De
Datei-Manager
Geplante
Gep
p la Aufnahme
Standby Programm aufzeichnen:
Zur Aufnahme des Programms, das Sie gerade sehen,
UKTV Br’tldeas_Good Food Bites_20041119_161021.ts
drücken Sie REC; das rote REC-Symbol wird angezeigt.
BBC ONE_Olympics 2012_20120808_114427.ts
Funktion Aufnahmezeit und verbleibende Aufnahmezeit werden
UKTV Br’tldeas_Good Food Bites_20041119_162019.ts
Wiedergabe
im Menü unten angezeigt.
Eins löschen
Informationen zu der aktuellen Abspieldatei.
EXIT Alle löschen
Nach unten
500GB liegen, aber für den praktischen Gebrauch
OK
EXIT Auswählen wird eine Größe von 2GB bis 500GB empfohlen.
MENU Zurück
EXIT Beenden
2.Das Video kann verpixeln, falls die Bitrate zu
niedrig eingestellt ist. Dies kann aufgrund der
Scheduled Record: Hier stellen Sie die Aufnahmeliste ein. Benutzung eines USB-Verlängerungskabels
Sie können die eingestellten Programme ebenfalls erfolgen, wenn Sie das Speichermedium nicht
löschen.
direkt am USB-Port des Fernsehers anschließen.
Geplante Programmaufnahmen
Geplante
Gep
p la Aufnahme 3.Der Großteil im Handel erhältlichen USB-
Standby
Speichermedien sind kompatibel, allerdings läßt
Gruppe Frequenz Kanal Datum Startzeit Dauer
1 Einmal 0 Colourbars100 2004 . 12 . 25 18 : 17 00 : 30 sich hierfür keine Garantie geben. Empfohlen sind
2 Aus
3 Aus vor allem Hi-Speed Speichermedien mit hohen
Funktion 4 Aus
Eins löschen
5 Aus Transferraten.
6 Aus
Alle löschen 7 Aus
8 Aus
Hot key 9 Aus
10 Aus
Nach oben
11 Aus
Nach unten 12 Aus
OK 13 Aus
EXIT Auswählen
14 Aus
MENU Zurück 15 Aus
EXIT Beenden 16 Aus
Hinweis
Ihr Speichergerät muss zur Aufnahme angeschlossen Aufnahmedatei wiedergeben
und kompatibel sein. Ist Ihr Speichergerät nicht Der Haier-Fernseher zeichnet das Programm im Format
kompatibel, so werden Sie aufgefordert, es zu *.ts auf dem USB-Speichermedium auf. Andere
Fernseher, PCs, Laptops, DVD-Player oder sonstige
formatieren. Rufen Sie das PVR-Dateisystem-Menü auf
Geräte, welche die *.ts Datei nicht unterstützen, können
und wählen Sie in der Geräteliste Ihr zu formatierendes die Datei nicht wiedergeben. „ts“ ist das Format von HD-
Gerät. Fernsehern. Mit der richtigen Software können Sie „ts“
Für CI+ Kanäle haben Sie keine Aufnahmefunktion. Dateien auf einem Computer oder Laptop wiedergeben.
Im Internet oder bei einem IT-Anbieter finden Sie
weitere Informationen zu geeigneter Software.
Achtung: Haier übernimmt keine Verantwortung für
9.Time Shift heruntergeladene Software; diese kann Viren und
Drücken Sie die ▶ , um das aktuelle Programm Schadprogramme enthalten. Die Benutzung erfolgt auf
zu unterbrechen und die Timeshift-Funktion zu aktivieren. eigene Gefahr und kann die Kopierschutzrechte
Das nachstehende Menü wird angezeigt. Nach einigen verletzen.
Sekunden wird das Menü wieder automatisch
ausgeblendet.
00:00:00
00:00:05
Verfügbare Zeit
Wiedergabe Pause Stopp FB FF 00:00:00/04:13:20
10. USB-Player
Drücken Sie Source und wählen Sie „USB“ in der Liste der Quellen, dann drücken Sie OK zum Aufrufen des USB-Menüs.
Das USB-Speichermedium muss am Fernseher angeschlossen sein. Wählen Sie zwischen Foto, Musik, Film und Text.
Wählen Sie die Art des Mediums mit ◄►, dann drücken Sie OK zum Aufrufen des Auswahlmenüs.
Haier Innovation Life
Drücken Sie ▼ / ▲ zur Auswahl des Ordners und dann OK zum Aufrufen der Dateiliste. Drücken Sie die rote Taste, um zur
Medienauswahl zurückzukehren.
Wählen Sie die Mediendatei mit ◄► oder ▼▲, die Vorschau wird angezeigt. Drücken Sie ► zur Wiedergabe als Vollbild.
Bei Wiedergabe einer Filmdatei drücken Sie ▼ zur Anzeige der Steuerelemente.
FOTO
USB1/1080
FOTO
Allgemeine Funktionen
Während der Ansicht von Fotos drücken Sie ▼ zur Anzeige der Steuerelemente unten im Bild.
Wiedergabe/
Drücken Sie Wiedergabe/Pause, um die Wiedergabe zu unterbrechen oder fortzusetzen.
Pause
Vorherige
Drücken Sie die linke Pfeiltaste, um das vorherige Foto anzuzeigen.
Datei
Nächste
Drücken Sie die rechte Pfeiltaste, um das nächste Foto anzuzeigen.
Datei
Drücken Sie die linke/rechte Pfeiltaste zur Auswahl der Funktion, dann drücken Sie OK,
Stopp
um die Wiedergabe zu beenden und in das vorherige Menü zurückzukehren.
10547672
Wiedergabe
00:00:53 00:00:00
MUSIK
Während der Musikwiedergabe drücken Sie ▼ zur Anzeige der Steuerelemente unten im Bild.
Allgemeine Funktionen
Rücklauf: Drücken Sie die linke/rechte Pfeiltaste zur Auswahl der Funktion, dann drücken Sie OK, um
schnell zurückzuspulen. Drücken Sie die Wiedergabetaste, um die Normalwiedergabe fortzusetzen.
Schneller Vorlauf: Drücken Sie die linke/rechte Pfeiltaste zur Auswahl der Funktion, dann drücken Sie
OK, um schnell vorzuspulen. Drücken Sie die Wiedergabetaste, um zur Normalwiedergabe
zurückzukehren.
Hintergrundmusik: Drücken Sie die linke/rechte Pfeiltaste zur Auswahl der Funktion, dann drücken
Sie OK, um die Musik ein- oder auszuschalten.
Die anderen Funktionen entsprechen den Beschreibungen im Abschnitt FOTO. Siehe Einzelheiten im
Abschnitt FOTO.
Film
Die Funktionen entsprechen den Beschreibungen im Abschnitt FOTO. Siehe Einzelheiten im Abschnitt FOTO.
Allgemeine Funktionen
A-B Wiederholung: Drücken Sie die linke/rechte Pfeiltaste zur Auswahl der Funktion, dann drücken
Sie OK, um die Punkte A und B der Wiederholungsschleife einzustellen.
Vergrößern: Drücken Sie die linke/rechte Pfeiltaste zur Auswahl der Funktion, dann drücken Sie OK,
um das Bild zu vergrößern (ist das Dokument größer als 1920x1080, so ist die Funktion nicht
unterstützt).
Verkleinern: Drücken Sie die linke/rechte Pfeiltaste zur Auswahl der Funktion, dann drücken Sie OK,
um das Bild zu verkleinern (diese Funktion unterstützt bis zu 1920x1080 HD-Video).
Zeit wählen: Drücken Sie die linke/rechte Pfeiltaste zur Auswahl der Funktion, dann drücken Sie OK,
um einen Zeitpunkt in der Datei zur Wiedergabe zu wählen.
TEXT
Drücken Sie ▼/▲ zur Auswahl der vorherigen/nächsten Seite. Mit den Zifferntasten und OK geben Sie die Seite
direkt ein.
11)Standardquelle
17)Wiederherstellung von USB
Drücken Sie ◄/► zur Auswahl der „Standardquelle“ nach
Stellen Sie die TV-Daten über USB-Stick wieder her.
dem Einschalten. Jede Eingangsquelle kann gewählt
Zu den Daten gehören: Hotel-Logo, Begrüßung,
werden.Eingangsquellen:DTV/ATV/SCART/YPbPr/PC/
HDMI1/HDMI2/AV/USB. Hotel-Moduseinstellung,
Standardeinstellung ist „DTV“ Bildschirmmenüeinstellung und Kanaldaten.
12)Standardkanal 18)Rückstellung
Einstellen des Standardkanals nach dem Einschalten.
Stellen Sie alle Einstellungen zu den
Die Option steht nur zur Verfügung, wenn als „Standardquelle“
Standardwerten im Hotel-Modus zurück.
„DTV/ATV“ gewählt ist.
13)Logo wählen 19)Hotel-Modus ausführen
Einstellen des Logos nach dem Einschalten. Die Optionen Hotel-Moduseinstellung durchführen Hotel-Modus-
sind:
„HSP Logo“: Der Fernseher zeigt nach dem Einschalten das Bildschirmmenü verlassen.
„HSP Logo“ an.
„Hotel-Logo“: Der Fernseher zeigt nach dem Einschalten das
vom USB übertragene Logo an.
„Keine“: Der Fernseher zeigt nach dem Einschalten kein
Logo an.
Standardeinstellung ist „HSP Logo“.
USB-übertragenes Logo
Schließen Sie einen USB-Stick am USB-Port des Fernsehers
an.
Nach dem Erkennen des USB-Geräts rufen Sie das Media
Center auf.
Wählen Sie „Foto“ und zeigen Sie das aufzunehmende Bild
an.
Drücken Sie die „gelbe Taste“ auf der Fernbedienung, um
das Logo aufzunehmen.
Das Bildformat muss jpg/jpeg sein. Die maximale Größe des
Bildes ist 128 KB.
14)Begrüßung
Einstellen der „Begrüßung“ nach dem Einschalten.
Die Optionen sind: Aus/5 Sekunden/10 Sekunden/20
Sekunden.
Standardeinstellung ist „Aus“
15)Begrüßung aktualisieren
Aktualisieren Sie die „Begrüßung“ über ein USB-Gerät.
Datei-Spezifikationen:
Dateiname: „hotel.txt“.
Encoding: ANSI (Hinweis: Dateiformat „Unicode“ ist nicht
korrekt)
Schriftzeichen: 3 Zeilen, 30 Schriftzeichen je Zeile.
USB-Klonen
Bitte beachten Sie: Sie können diese Funktion nur auf dem
gleichen TV-Modell mit gleicher Software-Version benutzen.
05 Störungserkennung
Problem
Überprüfen
Bild Ton De
Antennenposition, -ausrichtung
verschneit gestört oder -anschluss
normaler Ton
Bild verschwindet Kanal neu konfigurieren
oder leise
Fehlerbehebung
Wenn Sie einen VGA-Stecker (blaue 15-polige Stecker an Ihrem PC
Mein Fernseher zeigt nicht das Bild auf oder Laptop) angeschlossen haben, ist es häufig erforderlich, dass Sie
meinem Laptop/PC, wenn er an Ihrem PC/Laptop eine Einstellung vornehmen müssen, um das Bild
eingeschaltet ist. auf dem Fernsehbildschirm sehen zu können. Lesen Sie ggf. in Ihrem
Handbuch für Ihren PC/Laptop nach. Für einige Geräte gelten die
folgenden Tasten: F7 (Dell), F4 (HP / Samsung) oder F5 (Toshiba) oder
probieren Sie das gleichzeitige Drücken von "Fn"-Taste und "F"-Taste.
Überprüfen Sie für alle Signalquellen ATV, DTV, SCART, HDMI 1, 2 usw,
Das Bild hat keine automatische
ob das Fernsehbild-Seitenverhältnis auf 'Auto' eingestellt ist.. Um das
Größenanpassung beim Senderwechsel.
Seitenverhältnis (Auto, 4:3 oder 16:9) einzustellen, drücken Sie die
Taste Source auf Ihrer Fernbedienung, beginnend bei ATV, und
wiederholen Sie die unten beschriebene Einstellungaufg für alle
Signalquellen ATV, DTV, SCART, HDMI 1 und 2, da jede Eingangsquelle
separat gesteuert wird. Gehen Sie vor wie folgt:
Drücken Sie MENU auf Ihrer Fernbedienung und drücken den Pfeil nach
rechts um zum Bild-Untermenü zu gelangen.
Drücken Sie den Pfeil nach unten, um den Menüpunkt Bildformat
auszuwählen.
Wählen Sie Auto aus.
Drücken Sie Ende.
Wiederholen Sie diese Schritte für alle Signalquellen.
Dies gilt für jedes Gerät, dass Sie an Ihren Fernseher anschließen.
Ich habe gerade einen DVD-Player bzw. 1.Schalten Sie sowohl den Fernseher als auch das externe Gerät z.B.
ein anderes Gerät an meinen Fernseher DVD-Player aus (ziehen Sie den Stecker aus der Steckdose / kein
angeschlossen, und es funktioniert nicht. Bereitschaftsmodus).
2.Schalten Sie alle Geräte aus, die an der SCART-Buchse angeschlossen
sind.
3.Trennen Sie den SCART-Stecker vom Fernseher.
4.Stecken Sie den Fernseher-Stecker wieder in die Steckdose und
schalten Sie den Fernseher ein.
5.Stecken Sie den Geräte-Stecker z.B. vom DVD-Player wieder in die
Steckdose und schalten Sie das Gerät ein.
6.Wählen Sie die Signalquelle HDMI mittels Fernbedienung aus
(Source).
7.Starten Sie die Wiedergabe des Geräts z.B. des DVD-Player und prüfen
Sie, ob die Filme ordnungsgemäß wiedergegeben werden.
HINWEIS: Die SCART-Buchse ist gegenüber dem HDMI-Anschluss als
Standard definiert, daher ist es wichtig, dass alle über SCART am
Fernseher angeschlossenen Geräte AUSGESCHALTET sind (nicht im
Bereitschaftsmodus / Stecker ziehen).
Bitte beachten Sie diesen Hinweis. Mögliche Ursache des Problems
kann die Entfernung/erneutes Anbringen des HDMI-Steckers sein
während der fernseher im eingeschalteten Zustand war.
Schalten Sie Ihren Fernseher immer zunächst aus und bringen Sie
niemals ein HDMI-Kabel im eingeschalteten Zustand des Fernsehers an
bzw. entfernen es.
Schalten Sie immer alle Geräte aus, wenn ein beliebiges Digitalgerät
entfernt oder angeschlossen wird.
Weiße Umrisse
Weiße Ränder um Objekte und Personen erscheinen in der Regel, wenn die Fernsehschärfe auf sehr hoch eingestellt ist, oder wenn
Ihr Fernsehgerät eine Verarbeitungstechnologie der Kantenschärfung verwendet. Gehen Sie zum Bildmenü und passen Sie die
Schärfe an, bis die weiße Umrandung verschwindet. Wenn die Kantenschärfung aktiviert ist, versuchen Sie es, mit dem Service-
Menü zu deaktivieren.
Video flackert
Zeitweise könnte das Video flackern. Wenn dies der Fall ist, überprüfen Sie, ob das Signal stark genug ist. Wenn das Signal stark ist,
liegt das Problem bei dem Kabelnetzbetreiber. Wenn die Signalstärke zu schwach ist, versuchen Sie, die Signalstärke mit Hilfe eines
Verstärkers zu steigern.
Kein Vollbild auf dem Bildschirm
Beim Anschluss eines PCs oder Laptops an den Fernseher, füllt das Bild möglicherweise nicht den gesamten Bildschirm aus.
Überprüfen Sie die Displayeinstellungen auf Ihrem PC oder Laptop (Windows > Start > Systemsteuerung > Darstellung und
Anpassung > Displayeinstellungen) und wählen Sie die beste Auflösung. Wählen Sie auf Ihrem Fernseher: TV-Menü > Bild >
Einstellungen, und dann versuchen Sie AUTO, ZOOM1 oder ZOOM2 für die beste Anzeige.
USB-Anschluss
Der USB-Anschluss funktioniert mit *.jpg (Foto)- und *.mp3 (Musik)-Dateien. Bitte beachten Sie, dass der Fernseher das iPhone
oder den iPod von Apple, die an den USB-Anschluss des Fernsehers angeschlossen sind, nicht erkennt. Der Fernseher kann andere
Dateien wiedergeben, aber aufgrund der vielen verschiedenen Dateiformaten, gibt es keine Garantie, dass diese anderen
Dateiformate funktionieren.
06 Spezifikationen
22" Full HD 1080p Digitaler LED LCD-Fernseher
FULL HD
Integriert digital.
Bildqualität:
Bildschirmdiagonale: 55 cm
Auflösung 1920x1080 Pixel 50 Hz.
DVB-T, DVB-C
DTV-Tuner Decoder 16/32/64/128/256 QAM Modulation /QPSK Modulation
MPEG2, MPEG4, H.264
2 x HDMI.
1 x SCART.
PC-Eingang.
Komponenten Video.
Komposit.
1 x USB-Port.
1 x Kopfhörerbuchse.
Anschlüsse:
1 x KOAXIAL .
Unterstützte Systeme: PAL+ SECAM
Kanalspeicher: 1000 (DTV), 100 (ATV)
TV (RF): 75 Ω asymmetrisch
AV Videoeingang: 75 Ω, 1 V-P, RCA
AV Audioeingang: 20 kΩ, 500 m V RMS
YPbPr/HDMI Videoeingang: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
NICAM Stereo.
Klangqualität: 2 x 3 Watt RMS Ausgangsleistung.
Leistungsaufnahme <0.30W
Stand-by
Digital interaktiv.
Digitaltext.
Digital Video Broadcasting (DVB) Untertitel verfügbar.
Automatische Installation.
Automatische Kanalsuche.
Digitale Funktionen: Elektronische Fernsehzeitschrift.
7 Tage Elektronische Fernsehzeitschrift (EPG).
Top up TV-kompatibel.
CI-Schacht.
Audiobeschreibung kompatibel.
UHF/VHF Tuner; Sleeptimer; Altersfreigabe ; Bild und Text
Fernbedienung benötigt 2 x AAA Batterien (mitgeliefert).
VESA-Befestigung: 100 mm x 100 mm
Paketgröße (BxHxT ): 616x426x135mm
Zusätzliche Funktionen: Set-Größe (BxHxT ) mit Standfuß: 513x355x160 mm
Set-Größe (BxHxT ) ohne Standfuß: 513x312x42 mm
Paketgewicht: 4.1 kg
Set-Gewicht mit Standfuß: 2.9 kg
Set-Gewicht ohne Standfuß: 2.7 kg
*Änderung der Spezifikationen vorbehalten.
DIE Angaben dienen nur als Referenz.
Änderung von Design und Spezifikationen vorbehalten.
Scart-Ausgang:
1.Bei Quelle ATV/AV/SCART ist das Scart-Ausgangssignal ATV.
2.Bei Quelle DTV kein Scart-Ausgangssignal.
3.Andere Quellen haben kein Scart-Ausgangssignal.
DE-33 LCD-Fernseher mit LED-Hintergrundbeleuchtung
Spezifikationen
DVB-T, DVB-C
DTV-Tuner Decoder 16/32/64/128/256 QAM Modulation /QPSK Modulation
MPEG2, MPEG4, H.264 De
2 x HDMI.
1 x SCART.
PC-Eingang.
Komponenten Video.
Komposit.
1 x USB-Port.
1 x Kopfhörerbuchse.
Anschlüsse:
1 x KOAXIAL .
Unterstützte Systeme: PAL+ SECAM
Kanalspeicher: 1000 (DTV), 100 (ATV)
TV (RF): 75 Ω asymmetrisch
AV Videoeingang: 75 Ω, 1 V-P, RCA
AV Audioeingang: 20 kΩ, 500 m V RMS
YPbPr/HDMI Videoeingang: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
NICAM Stereo.
Klangqualität: 2 x 3 Watt RMS Ausgangsleistung.
Leistungsaufnahme <0.30W
Stand-by
Digital interaktiv.
Digitaltext.
Digital Video Broadcasting (DVB) Untertitel verfügbar.
Automatische Installation.
Automatische Kanalsuche.
Digitale Funktionen: Elektronische Fernsehzeitschrift.
7 Tage Elektronische Fernsehzeitschrift (EPG).
Top up TV-kompatibel.
CI-Schacht.
Audiobeschreibung kompatibel.
UHF/VHF Tuner; Sleeptimer; Altersfreigabe ; Bild und Text
Fernbedienung benötigt 2 x AAA Batterien (mitgeliefert).
VESA-Befestigung: 100 mm x 100 mm
Paketgröße (BxHxT ): 650x440x135mm
Zusätzliche Funktionen: Set-Größe (BxHxT ) mit Standfuß: 568x386x160 mm
Set-Größe (BxHxT ) ohne Standfuß: 568x344x42 mm
Paketgewicht: 4.9 kg
Set-Gewicht mit Standfuß: 3.74 kg
Set-Gewicht ohne Standfuß: 3.5 kg
*Änderung der Spezifikationen vorbehalten.
DIE Angaben dienen nur als Referenz.
Änderung von Design und Spezifikationen vorbehalten.
Scart-Ausgang:
1.Bei Quelle ATV/AV/SCART ist das Scart-Ausgangssignal ATV.
2.Bei Quelle DTV kein Scart-Ausgangssignal.
3.Andere Quellen haben kein Scart-Ausgangssignal.
DVB-T, DVB-C
DTV-Tuner Decoder 16/32/64/128/256 QAM Modulation /QPSK Modulation
MPEG2, MPEG4, H.264
2 x HDMI.
1 x SCART.
PC-Eingang.
Komponenten Video.
Komposit.
1 x USB-Port.
1 x Kopfhörerbuchse.
Anschlüsse:
1 x KOAXIAL .
Unterstützte Systeme: PAL+ SECAM
Kanalspeicher: 1000 (DTV), 100 (ATV)
TV (RF): 75 Ω asymmetrisch
AV Videoeingang: 75 Ω, 1 V-P, RCA
AV Audioeingang: 20 kΩ, 500 m V RMS
YPbPr/HDMI Videoeingang: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
NICAM Stereo.
Klangqualität: 2 x 8 Watt RMS Ausgangsleistung.
Leistungsaufnahme <0.30W
Stand-by
Digital interaktiv.
Digitaltext.
Digital Video Broadcasting (DVB) Untertitel verfügbar.
Automatische Installation.
Automatische Kanalsuche.
Digitale Funktionen: Elektronische Fernsehzeitschrift.
7 Tage Elektronische Fernsehzeitschrift (EPG).
Top up TV-kompatibel.
CI-Schacht.
Audiobeschreibung kompatibel.
UHF/VHF Tuner; Sleeptimer; Altersfreigabe ; Bild und Text
Fernbedienung benötigt 2 x AAA Batterien (mitgeliefert).
VESA-Befestigung: 200 mm x 100 mm
Paketgröße (BxHxT ): 810x480x120mm
Zusätzliche Funktionen: Set-Größe (BxHxT ) mit Standfuß: 642x435x170mm
Set-Größe (BxHxT ) ohne Standfuß: 642x390x44mm
Paketgewicht:6.5 kg
Set-Gewicht mit Standfuß: 5.3 kg
Set-Gewicht ohne Standfuß: 5.0 kg
*Änderung der Spezifikationen vorbehalten.
DIE Angaben dienen nur als Referenz.
Änderung von Design und Spezifikationen vorbehalten.
Scart-Ausgang:
1.Bei Quelle ATV/AV/SCART ist das Scart-Ausgangssignal ATV.
2.Bei Quelle DTV kein Scart-Ausgangssignal.
3.Andere Quellen haben kein Scart-Ausgangssignal.
DVB-T, DVB-C
DTV-Tuner Decoder 16/32/64/128/256 QAM Modulation /QPSK Modulation
MPEG2, MPEG4, H.264 De
2 x HDMI.
1 x SCART.
PC-Eingang.
Komponenten Video.
Komposit.
1 x USB-Port.
1 x Kopfhörerbuchse.
Anschlüsse:
1 x KOAXIAL.
Unterstützte Systeme: PAL+ SECAM
Kanalspeicher: 1000 (DTV), 100 (ATV)
TV (RF): 75 Ω asymmetrisch
AV Videoeingang: 75 Ω, 1 V-P, RCA
AV Audioeingang: 20 kΩ, 500 m V RMS
YPbPr/HDMI Videoeingang: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
NICAM Stereo.
Klangqualität: 2 x 8 Watt RMS Ausgangsleistung.
Leistungsaufnahme <0.30W
Stand-by
Digital interaktiv.
Digitaltext.
Digital Video Broadcasting (DVB) Untertitel verfügbar.
Automatische Installation.
Automatische Kanalsuche.
Digitale Funktionen: Elektronische Fernsehzeitschrift.
7 Tage Elektronische Fernsehzeitschrift (EPG).
Top up TV-kompatibel.
CI-Schacht.
Audiobeschreibung kompatibel.
UHF/VHF Tuner; Sleeptimer; Altersfreigabe ; Bild und Text
Fernbedienung benötigt 2 x AAA Batterien (mitgeliefert).
VESA-Befestigung: 200 mm x 100 mm
Paketgröße (BxHxT ): 880x550x137mm
Zusätzliche Funktionen: Set-Größe (BxHxT ) mit Standfuß: 738.5x487.5x170mm
Set-Größe (BxHxT ) ohne Standfuß: 738.5x443x64mm
Paketgewicht:6.8 kg
Set-Gewicht mit Standfuß: 5.0 kg
Set-Gewicht ohne Standfuß: 4.7 kg
*Änderung der Spezifikationen vorbehalten.
DIE Angaben dienen nur als Referenz.
Änderung von Design und Spezifikationen vorbehalten.
Scart-Ausgang:
1.Bei Quelle ATV/AV/SCART ist das Scart-Ausgangssignal ATV.
2.Bei Quelle DTV kein Scart-Ausgangssignal.
3.Andere Quellen haben kein Scart-Ausgangssignal.
LE22M600CF
LE24M600CF
LE28M500C
LE28M600C
LE32M600C
03 Télécommande 06 Spécification
Présentation de la télécommande 16 Spécification 31
Télétexte 17
04 Utilisation
Guide d'installation 18
Menu Chaîne 18
Recherche auto. des canaux numériques terrestres. 18
Recherche auto. des canaux numériques câblés. 19
Recherche manuelle des canaux terrestres. 20
Recherche manuelle des canaux câblés. 20
Recherche manuelle des canaux analogiques 20
Édition des chaînes 20
Interface Commune 21
Etat du signal(uniquement pour les
canaux numériques) 21
Mise à jour 21
Menu image 21
INFORMATION IMPORTANTE
LISEZ ENTIÈREMENT CE MANUEL AVANT L'UTILISATION ET CONSERVEZ-LE POUR TOUTE RÉFÉRENCE ULTÉRIEURE
ATTENTION
RISQUES D'ELECTROCUTION
NE PAS OUVRIR
Précaution : afin d'éviter tout risque d'incendie ou de décharge électrique, n'installez
jamais votre téléviseur dans un lieu humide. Redoublez d'attention lorsque vous manipulez
l'écran pour ne pas le rayer par inadvertance ou l'endommager d'une autre façon. Veillez à
ne pas obstruer les orifices d'aération de votre téléviseur avec des journaux, nappes,
rideaux, etc
ATTENTION : La fiche électrique doit rester facilement accessible.
Consultez attentivement le présent mode d'emploi avant utilisation, puis rangez-le dans un
endroit facilement accessible pour pouvoir vous y reporter ultérieurement.
Pour obtenir des performances optimales, consultez attentivement le présent mode d'emploi, puis rangez-le
dans un endroit facilement accessible pour pouvoir vous y reporter ultérieurement.
Les chiffres et les données communiqués au sujet de l'écran dans le présent mode d'emploi peuvent, suite aux
innovations technologiques apportées, ne pas correspondre tout à fait aux caractéristiques de votre modèle.
Tout démontage, sans approbation préalable, du présent produit est strictement interdit, elle entrainerait
l'annulation de la garantie Haier.
Précaution: pour éviter tout risque d'incendie, tenez bougies et autres sources de flammes ouvertes à
distance du produit en toutes circonstances.
INSTRUCTIONS DE SÉCURITÉ
Attention : Pour réduire le risque Ce symbole indique que ce produit ne doit pas
d'électrocution, ne pas ouvrir le capot arrière. être mis au rebut avec les déchets ménagers et
Aucun des éléments internes ne peut être ce dans tous les pays de l'Union Européenne. En
réparé par l'utilisateur. Confiez l'entretien à un
technicien qualifié. aidant à la récupération séparée, vous aidez à
garantir que les produits seront recyclés d'une
Attention : POUR REDUIRE LES RISQUES façon appropriée et ainsi à préserver les
D'INCENDIE OU D'ELECTROCUTION, N'EXPOSEZ ressources naturelles et à protéger
PAS CET APPAREIL A LA PLUIE OU A L'HUMIDITE.
l'environnement et la santé humaine. Ramenez
N'exposez pas l'appareil au ruissellement ni à la donc cet appareil aux points de collecte
projection d'eau, et ne placez aucun objet appropriées ou retournez-le au revendeur
contenant un liquide (tel qu'un vase) au dessus auprès duquel vous l'avez acheté. Ainsi il sera
de l'appareil.
recyclé et contribue à préserver
Éloignez le produit de la lumière directe du l'environnement.
soleil et de toute source de chaleur telle que
radiateurs ou poêles.
N'obstruez jamais les fentes d'aération. Les
fentes et ouvertures sur l'unité sont prévues
pour la ventilation. Ces fentes ne doivent jamais
être obstruées en plaçant l'appareil sur un ATTENTION
canapé, un tapis ou toute autre surface Ne modifiez aucun composant interne et bouton de
similaire. commande du téléviseur non décrit dans ce manuel. Tous les
téléviseurs à LED sont des équipements de haute tension
Ne placez pas cet appareil sur un chariot, un électrique.
support, un trépied ou une table instable. Il faut débrancher le téléviseur avant de nettoyer de la
L'appareil pourrait tomber, causant des poussière ou des gouttes d'eau sur l'écran, du boîtier ou
dommages ou des blessures. autour de l'un des boutons ou des connecteurs.
Utilisez un chiffon doux et sec et non pelucheux pour essuyer
Ne placez jamais d'objets lourds ou tranchants le téléviseur.
sur le panneau ou le cadre. Pendant les orages, débranchez le câble d'alimentation et le
câble d'antenne pour éviter d'endommager votre téléviseur
Débranchez la prise de courant lorsque et les autres appareils connectés.
l'appareil n'est pas utilisé. Toutes les opérations de réparation de ce téléviseur ne
doivent être effectuées que par du personnel qualifié.
Respectez l'environnement, lors du INSTALLATION
changement de pile de votre télécommande.
Veillez les jeter dans les conteneurs appropriés. * Placez le téléviseur dans une pièce où la lumière ne frappe
pas directement sur l'écran.
AVERTISSEMENT : Les piles (pile ou batterie ou * L'obscurité totale ou une réflexion sur l'écran peut provoquer
bloc batterie) ne doivent pas être exposées à une fatigue visuelle. Un éclairage doux et indirect est
une chaleur excessive telle que rayons du soleil,
recommandé pour une visualisation confortable.
feu, etc.
* Prévoyez suffisamment d'espace entre le téléviseur et le mur
AVERTISSEMENT : L'utilisation d'un casque ou pour permettre la ventilation.
d'écouteurs avec un volume sonore trop fort * Évitez les endroits trop chauds pour éviter tout dommage
peut causer une perte auditive. possible à l'enceinte ou une défaillance prématurée des
composants.
ATTENTION : Si l'appareil a accumulé des charges * Ce téléviseur peut être connecté à une prise secteur de 100-
électrostatiques, il se peut qu'il ne fonctionne pas 240 volts. 50/60 Hz. Ne le branchez jamais sur une prise de
correctement, dans ce cas il faut le réinitialiser. courant CC ou de n'importe quel autre type.
* Ne couvrez pas les fentes de ventilation lors de l'utilisation du
téléviseur.
Attention FR
Avertissement
Ne coincez pas le cordon d'alimentation sous le
Des hautes tensions dangereuses existent à
récepteur de télévision.
l'intérieur de cet appareil. Ne retirer pas le
panneau de sécurité à l'arrière du téléviseur.
Pour toute réparation, veuillez faire appel à un
technicien qualifié.
Attention
Ne montez jamais sur le téléviseur, ne vous
appuyez pas dessus et ne le poussez pas
Avertissement brusquement sur son socle. Prêtez une attention
Pour prévenir tout risque d'incendie ou particulière aux enfants. Risque de blessures
d'électrocution, n'exposez pas cet appareil à graves en cas de chute.
la pluie et à l'humidité.
Attention
Ne placez pas le téléviseur sur un chariot, une
étagère ou une table instable. Le téléviseur
risque de tomber et peut provoquer des
blessures graves et des dommages matériels
Avertissement importants.
N'introduisez pas d'objets étrangers par les
fentes des panneaux du téléviseur. Ne
renversez jamais de liquide sur le récepteur
du téléviseur .
Attention
Débranchez le téléviseur du secteur s'il ne va pas
être utilisé pour une longue période.
Distances minimales
Attention Dim:515*320mm(不包括底座)
02 Introduction
Caractéristiques
1 Ecran de télévision, Ecran d'affichage ou
Ecran PC
2 Une image homogène, un contraste contraste 4 NICAM;
dynamique jusqu'à 4 000 000:1, des noirs profonds
et des couleurs éclatantes. 5 Time-shift
3 Interface HDMI et péritel
Données principales
Taille d'écran 22 24 28 32
Système TV PAL-B/G, I, D/K
SECAM-B/G, D/K, L
DVB-T, DVB-C
Système du signal vidéo PAL/SECAM/MPEG2/MPEG4/H.264
Mémorisation des numéros des chaînes 1000 (DTV),100 (ATV)
Tension d'entrée 100-240V CA 50/60Hz
Consommation d'énergie 38W 40W 41W 50W
Consommation électrique en veille <0.30W
Puissance de sortie audio
(Taux de distorsion dynamique ≤ 7%)
2 x 3W 2 x 3W 2 x 8W 2 x 8W
Signal d'entrée 1 RVB analogique (PC) ; 1 audio PC
2 Interface HDMI (High Definition Multimedia Interface)
1 Entrée composite
1 YPbPr
1 Entrée Péritel
1 CI
1 USB
1 RF Co-Ax
PC
Affichage supporté
FR
RESOLUTION V. Fréq. (Hz) H. Fréq. (KHz)
1 640x480 60 31.47
2 800x600 60 37.88
3 1024x768 60 48.36
4 1366x768 60 47.7
5 1280x1024 60 63.98
1920x1080
6 60 66.64
(Seulement pour 22”,24”)
Installation du socle TV
1. Placez le téléviseur sur une surface plane avec 2. Fixez le socle TV en serrant les vis au
l'écran orienté vers le bas. Utilisez un chiffon pour maximum.
le protéger. Placez la partie inférieure du téléviseur
au dessus de l’axe du support.
(22",24")
(28")
(32")
REMARQUES SUR L'INSTALLATION
Placez le téléviseur dans une pièce où la lumière ne frappe pas directement sur l'écran. L'obscurité
totale ou une réflexion sur l'écran peut provoquer une fatigue visuelle. Un éclairage doux et
indirect est recommandé pour une visualisation confortable.
Prévoyez suffisamment d'espace entre le téléviseur et le mur pour permettre la ventilation.
S'il vous plaît ne pas tourner ce téléviseur! Son socle n'est pas pivotant.
Évitez les endroits trop chauds pour éviter tout dommage possible à l'enceinte ou une défaillance
prématurée des composants.
1. Placez le téléviseur LCD LED sur une surface solide. Mettez une protection souple à l'avant de
l'écran pour le protéger contre tout dommage.
FR
(22",24")
(28")
(32")
2. Utilisez les quatre vis fournies pour fixer le téléviseur sur un support mural (non inclus)
par les quatre trous VESA standard à l'arrière du téléviseur.
100mm
M4X5 M4X5
100mm
M4X5 M4X5
(22",24")
200mm
M4X5 M4X5
100mm
M4X5 M4X5
(28")
200mm
M4X5 M4X5
100mm
M4X5 M4X5
(32")
Panneau frontal(22",24",28")
SOURCE 1
2 1 MENU 2
FR
CH+
3
CH-
VOL+
30 30
≤8m 4
VOL-
STANDBY 5
Panneau frontal(32")
3
SOURCE 1
MENU 2
2 1 CH+
3
CH-
VOL+
4
VOL-
30 30
≤8m STANDBY 5
Prises arrières/latérales(22",24",28")
4
1 2 3 5
COMMON INTERFACE (CI)
USB HDMI2(ARC) HDMI1
6 7 8 9 10 11 12 13
Prises arrières/latérales(32")
AC-INPUT
100-240V~ 50/60Hz DIGITAL AUDIO OUTPUT
YPbPr VIDEO L R (COAXIAL) SCART
1 2 3 4 5 6
7 8 9 10 11 12 13 14
Ampli
FR
G B R
Y W R
CVBS, lecteur DVD ou autre
appareil équipé de CVBS/S-Vidéo
G Vert (Y)
B Bleu (Pb/Cb)
W Blanc (AUDIO-L)
R Rouge (AUDIO-R, Pr/Cr)
Y Jaune (VIDEO)
G Vert (Y)
B Bleu (Pb/Cb)
W Blanc (AUDIO-L)
R Rouge (AUDIO-R, Pr/Cr)
Y Jaune (VIDEO)
Ampli
Y W R
AC-INPUT
100-240V~ 50/60Hz DIGITAL AUDIO OUTPUT
YPbPr VIDEO L R (COAXIAL) SCART
G B R
INTERFACE COMMUNE
Le logement de l'interface commune (CI) est Des informations détaillées sur la carte CI en
destiné à un module d'accès conditionnel (CAM) cours d'utilisation seront affichées
et une carte à puce pour pouvoir regarder des Appuyez sur OK pour accéder au menu de la
programmes télé et des services supplémentaires carte. Reportez-vous au manuel d'utilisation du
payants. Contactez votre fournisseur d'accès module pour régler les détails
pour obtenir plus d'informations sur les modules
et l'abonnement. Notez que les modules CAM et Lorsque le module est retiré, le message
les cartes à puce ne sont ni fournis ni des suivant apparaît sur l'écran.
accessoires en option.
Carte à puce
CAM inséré
Balayage automatique
Chaîne
Scan manuel
Image Editer un programme
Interface commune
Audio Informations sur le signal
Mise à jour logicielle (USB)
Horloge
Configuration
Bloquer
03 Télécommande
SCREEN Appuyez sur pour changer le rapport d'aspect de l'image.
16 Appuyez sur pour ouvrir le menu à l' écran . En mode
télétexte, appuyez sur pour ouvrir la page "INDEX".
17 Appuyez sur pour naviguer dans le menu à l'écran.
OK Appuyez sur pour confirmer la sélection.
FR
En mode télétexte , appuyez sur pour passer en
mode mix.
(vers l' arrière) Appuyez sur pour la lecture rapide avant ou arrière
en mode multimédia et mode TimeShift (bouton
(vers l'avant)
rouge et vert en mode télétexte )
Appuyez sur pour activer / désactiver la fonction
télétexte , et changer le mode TTX .
Appuyez sur pour lecture / pause en mode
18 (lecture / pause) multimédia, timeshift en mode DTV .
TÉLÉTEXTE
Le télétexte est un système d'information diffusé par certaines chaînes, qui se consulte comme
un journal. Il offre également l'accès aux sous-titrages pour les personnes malentendantes ou
qui ne sont pas familiers avec la langue de transmission (réseaux câblés, chaînes satellites, etc.)
E
Appuyez sur : Vous obtenez
Il est utilisé pour appeler ou quitter le mode télétexte. Le sommaire
TEXTE apparaît avec une liste d'éléments qui peuvent être accédés. Chaque
élément a un numéro de page correspondante de 3 chiffres.
ACCÈS DIRECT AUX Les touches de couleur sont comme elles sont affichées en bas de l'écran.
ÉLÉMENTS Les 4 touches colorées permettent d'accéder aux rubriques ou aux pages
correspondantes. Les zones colorées clignotent lorsque la rubrique ou la
page n'est pas encore disponible.
04 UTILISATION
Guide d'installation Premier réglage de l’heure
3). Utilisez les touches ◄► pour sélectionner type antenne 1.2)Recherche auto. des canaux numériques
hertzien signifie DVB-T. câblés.
Remarque
Chaîne Type d'antenne Air
Pays Allemagne
1). Appuyez sur la touche MENU puis utilisez les touches
Image Mode DTV+ATV
▼▲ pour sélectionner le menu châine puis appuyez sur la
Démarrer
touche OK.
Audio 2). Utilisez les touches ▼▲ pour sélectionner Recherche
automatique puis appuyez sur la touche OK, sélectionner
Horloge
Type d'antenne pour cable signifie DVBC.
Configuration
Chaîne Type d'antenne Câble
Pays France
Bloquer
Image Mode DTV+ATV
MENU Retour Déplacer OK OK Démarrer
Audio
8). Une fois la recherche terminée, les chaînes seront disposées Configuration
dans un ordre préétabli. Si vous souhaitez ignorer des chaînes,
modifier l'ordre des chaînes préréglées ou les renommer, Bloquer
sélectionnez Programme Edit (Modifier les programmes) dans MENU Retour Déplacer OK OK
le menu Chaîne.
6).La recherche des chaînes démarre. Cette opération peut
prendre jusqu'à quelques minutes. L'écran affiche l'état
Chaîne
Recherche en cours Ch12 d'avancement de la recherche et le nombre de chaînes
trouvées.
Canaux numériques trouvés:
Image
DTV: 3 7).Si vous voulez ignorer la recherche DTV, appuyez sur la
Radio: 0
Audio touche MENU pour l'interrompre. Vous serez redirigez
Données: 0
Canaux analogiques trouvés: 0
directement à la recherche ATV. Vous pouvez répéter
Horloge l'étape ci-dessus si vous voulez également ignorer
recherche ATV. Un rappel d'installation apparaîtra la
Configuration prochaine fois que vous allumez le téléviseur, si aucune
chaîne n'a été trouvée.
Bloquer
8).Une fois la recherche terminée, les chaînes seront
Passer EXIT Quitter
MENU
disposées dans un ordre préétabli. Si vous souhaitez
ignorer des chaînes, modifier l'ordre des chaînes
préréglées ou les renommer, sélectionnez Programme Edit
(Modifier les programmes) dans le menu Chaîne.
Remarque Chaîne
Fréquence 474000K
Symboles de débit 6875K
Toutes les chaînes, y compris ATV, DTV et radio peuvent
Modulaton Auto
être recherchées en une fois, si le type de recherche est Image
1).Appuyez sur la touche MENU puis utilisez les touches 4). Édition des chaînes
▼▲ pour sélectionner le menu Chaîne puis appuyez sur Utilisez les touches ▲▼ pour sélectionner Program Edit
la touche OK. Si vous sélectionnez Cable dans recherche dans le menu Chaîne. Appuyez ensuite sur la touche OK
automatique, vous entrez dans le menu recherche pour accéder au sous-menu. Vous devez ensuite
manuelle DVBC. sélectionner le programme que vous souhaitez modifier.
Editer un programme
2. MENU IMAGE
001 The HITS DTV
002 TMF DTV Le second élément du MENU est le menu Image. Ce
003 UKTV Br’tldeas DTV menu permet de régler les paramètres de l'image tels que
004 f th DTV contraste, luminosité, etc. Appuyez sur ▼▲ pour déplacer,
005 Ideal World DTV appuyez sur ◀▶ pour régler.
006 Colourbars100 DTV
001 Kiss Radio
Mode Image Standard
002 Smash Hits! Radio Chaîne
003 Kerrang! Radio Luminosité 50
Ignorer : Appuyez sur la touche Jaune pour sélectionner la Contraste Dynamique Moyen
Configuration
fonction Ignorer, un symbole Ignorer sera affiché à côté du Format 16:9
4. MENU Horloge
Le troisième élément du Menu est le menu Horloge. Vous Paramètres PVR
Déplacer vers la gauche
pouvez régler l'heure, l'heure de mise en marche/arrêt,
l'heure de veille automatique etc. Utilisez les touches ▼▲ Déplacer vers la droite
Horloge
Veille automatique (4hr)
1. Le téléviseur lance la séquence d'arrêt automatique, si
au bout de 4 heures de mise en marche aucun changement Configuration
Supprimer un
affichées dans le menu ci-dessous.
Actuellement l'Informations sur le fichier Jouer
Supprimer tout
Nom de la chaîne BBC ONE
Enregistrement
Zoom
Clès
C è Nom du programme Olympics 2012
Déplacer vers le haut
2012/08/09 11:44 Durée d'enregistrement : 00 : 00 : 40
Déplacer vers le bas Durée d'enregistrement
Temps Disponible : 25 Minute
OK
EXIT Sélectionner Temps total 00:08:06
MENU Retour
Description Matt Baker and Clare Balding
Appuyez de nouveau sur la touche REC pour afficher le
present coverage of the eager...
EXIT Sortie menu. Appuyez sur la touche STOP pour arrêter
l’enregistrement. Vous pouvez également accéder au
Liste d'appareils: Ce sous-menu affiche la liste des
menu Media Player pour regarder vos programmes
appareils USB connectés au téléviseur. Vous pouvez
enregistrés via le mode Film.
sélectionner un appareil USB, puis appuyez sur la touche
Rouge pour le formater. Lecture d’un enregistrement:
Le programme enregistré sur l'appareil USB sera
Liste des appareils
Dispositif L'espace disponible Système de fichiers
sauvegardé dans le dossier "USB record".
sda1 192 MB FAT32 Vous pouvez le lire dans le sous-menu système de
fichiers PVR et Gestionnaire de fichiers.
Fonction
Format
Clès
1. La capacité de stockage USB peut être comprise entre
Déplacer vers le haut
128 et 500 Go, mais pour des raisons pratiques, il est
Déplacer vers le bas recommandé d'utiliser 2 Go à 500 Go.
OK
EXIT Sélectionner 2. La vidéo risque de devenir pixélisée si le débit vidéo
MENU Retour
est trop faible. Cela peut être dû à la connexion d'un
EXIT Sortie
câble de rallonge USB au lieu d'une connexion directe
au téléviseur via un câble USB
Enregistrement programmé Ici: Vous pouvez configurer la
3. Les dispositifs USB ne sont pas tous compatibles.
liste des enregistrements programmés. Et vous pouvez
également supprimer les enregistrements programmés
que vous avez définis.
Listes des enregistrements programmés
Enregistrement programmé
Enreg
Veille
Remarque
• Veillez à ce que l’appareil de stockage utilisé pour Lecture des fichiers enregistrés
Le téléviseur Haier enregistre le programme sur la clé
enregistrer soit connecté à l’entrée USB située à l’arrière du USB au format "Time Shift"*.ts. Le fichier ne sera pas lu si
téléviseur et qu’il est compatible pour l’enregistrement. Si le téléviseur, PC, ordinateur portable, lecteur DVD ou
autre appareil ne supporte pas ou ne reconnaît les
votre appareil de stockage n’est pas compatible, il vous
fichiers *.ts (time shift). "Ts" est le format utilisé pour la
sera demandé de le formater. Accédez au menu système de diffusion télévision haute définition. Vous pouvez lire
fichiers PVR et sélectionnez Liste de périphériques pour des fichiers au format "ts" sur un ordinateur ou un
ordinateur portable en utilisant un logiciel approprié.
formater votre appareil. Cherchez sur Internet ou consultez un informaticien
• L'enregistrement ne sera pas possible lorsque la chaîne pour avoir une idée sur le logiciel le plus approprié.
provient d'un module CI+. Attention : Haier ne peut pas être tenu responsable des
logiciels téléchargés par un client ou un revendeur et
des virus qu'ils peuvent contenir et de tout
dysfonctionnement résultant de leur installation. Le
client est seul responsable et utilise ces logiciels à ses
propres risques.
9. Lecture décalée
Appuyez sur la touche ▶II p our suspendre le programme
que vous regardez pour activer la fonction Time Shift.
Le menu ci-dessous sera affiché. Ce menu disparaîtra
automatiquement après quelques secondes.
00:00:00
00:00:05
Temps Disponible
Jouer Pause Detener FB FF 00:00:00/04:13:20
Assurez-vous que la clé USB est insérée dans le port USB. Il existe quatre types d'éléments multimédia qui peuvent être
sélectionnés, tels que photo, musique, film et texte. Sélectionnez l'élément multimédia en utilisant ◄►, appuyez sur OK
pour accéder au menu Disque selection.
Haier Innovation Life
FR
PHOTO Musique Film Texte
Utilisez les touches ▼/▲ pour sélectionner le disque et le dossier appropriés, appuyez sur OK pour accéder à la liste des fichiers
multimédias. Appuyez sur la touche Rouge pour retourner au menu Type de média selection (sélection du type de support).
Sélectionnez le fichier multimédia en utilisant ◄► ou ▼▲ pour afficher l'image de prévisualisation. Appuyez sur la
touche ► pour lire le fichier multimédia en plein écran. Lors de lecture de fichier vidéo, appuyez sur la touche permet▼
pour afficher la barre de contrôle.
Photo
USB1/Pic
PHOTO
Fonctions de base
Lors d'affichage de photos, appuyez sur la touche ▼de la télécommande pour afficher la barre d'aide en bas de l'écran.
Lecture/
Appuyez sur Play/Pause de la télécommande pour lire ou suspendre la lecture.
Pause
Préc. Appuyez sur la touche Gauche de la télécommande pour afficher la photo précédente.
Suivant Appuyez sur la touche Droite de la télécommande pour afficher la photo suivante.
Appuyez sur la touche Bleue pour accéder au menu rapide et régler les intervalles de
Menu rapide
temps. Répéter, effet diaporama, musique de fond (vous pouvez lire de la musique d'abord).
Musique
USB1/Music
.. 1/1 Titre:
Album:
10547672.mp3 Artiste:
Piste
14953359.mp3 Année: 2010-09-30
1/2
10547672
LECTURE
00:00:53 00:00:00
MUSIQUE
lors de lecture de musique, appuyez sur ► pour sélectionner la barre d'outils.
Fonctions de base
Retour rapide : Utilisez les touches Gauche/Droite de la télécommande pour sélectionner cette fonction,
appuyez sur OK pour retourner rapidement. Appuyez sur la touche PLAY pour lire normalement.
Avance rapide : Utilisez les touches Gauche/Droite de la télécommande pour sélectionner cette fonction,
appuyez sur OK pour avancer rapidement. Appuyez sur la touche PLAY pour lire normalement.
Musique de fond : Utilisez les touches Gauche/Droite de la télécommande pour sélectionner cette fonction,
appuyez sur OK pour activer/désactiver.
D'autres fonctions sont similaires à celles de PHOTO. Reportez-vous aux options PHOTO.
FILM
Les fonctions sont similaires à celles de PHOTO. Reportez-vous aux options PHOTO.
Fonctions de base
Répéter A : Utilisez les touches Gauche/Droite de la télécommande pour sélectionner cette fonction,
appuyez sur OK pour fixer A et B.
Zoom avant : Utilisez les touches Gauche/Droite de la télécommande pour sélectionner cette fonction, appuyez
sur OK pour agrandir l'image. (Si le document est plus grand que 1920x1080, cette fonction n'est pas appliquée)
Zoom arrière : Utilisez les touches Gauche/Droite de la télécommande pour sélectionner cette fonction, appuyez
sur OK pour réduire l'image. (Cette fonction ne supporte pas de vidéo HD 1920x1080.)
Sélection de l'heure : Utilisez les touches Gauche/Droite de la télécommande pour sélectionner cette fonction,
appuyez sur OK pour sélectionner l'heure de lecture.
TEXTE
Utilisez les touches ▼/▲ pour sélectionner la page précédente/suivante. Vous pouvez utiliser les touches
numériques et OK pour aller à une page donnée.
Voici une liste des principaux types de fichiers qui peuvent être lus à partir d’une clé USB
Photo Fichiers.jpg
Audio .mp3
Vid é o .avi,.mp4
Texte .txt
05 Assistance
Symptôme du problème
Vérification Inspection
Image Audio FR
position de l'antenne, direction
Neige Bruit ou connexion
équipements électroniques,
Interférence Bruit voiture / moto, lumière fluorescente
Assistance
Pour la plupart des PC et ordinateurs portables connectés avec un
Ma télé n'affiche pas l'image sur connecteur VGA (connecteur bleu à 15 broches de votre PC ou
mon ordinateur portable/PC ordinateur portable) il faut appuyer sur quelques touches de votre
lorsqu’il est connecté. clavier pour obtenir une image sur un téléviseur ou un autre écran
externe. En général, il s’agit de la touche F7 (Dell), F4 (HP/Samsung)
ou F5 (Toshiba). Sur les ordinateurs portables, vous devez appuyer
sur la touche « Fonction » en même temps que la touche "F".
L'image n'est pas redimensionnée Vérifiez que le format de l’image télé est réglé sur « Auto » pour
toutes les entrées ATV, DTV, Péritel, HDMI 1, 2, etc.
automatiquement lors de Pour définir le format de l’image (Auto, 4:3 ou 16:9). Appuyez sur la
changement de chaînes. touche Démarrer sur l’ATV et répétez la séquence ci-dessous pour
toutes les sources d'entrée ATV, DTV, Péritel, HDMI 1 et 2 car
chaque source d'entrée est contrôlée séparément.
Appuyez sur la touche TV Menu
Appuyez sur la flèche droite pour accéder au sous-menu Image
Appuyez sur la flèche vers le bas pour sélectionner Format d'image
(Format d’image)
Sélectionnez Auto (Automatique)
Appuyez sur (Quitter)
Répétez l'opération pour toutes les sources d'entrée.
06 Sp é cifications
Téléviseur numérique LCD LED 22" Full HD 1080p
FULL HD
Qualité d'image du Taille d'écran : 55cm
téléviseur : Résolution 1920x1080 pixels 50Hz.
DVB-T, DVB-C
Décodeur Tuner DTV Modulation QAM 16/32/64/128/256/ Modulation QPSK
MPEG2, MPEG4, H.264
2 prises HDMI.
1 prise péritel.
Prise d'entrée PC.
Prise vidéo composante.
Composite.
1 port USB.
Connectivité : 1 Prise casque.
1 Prise Coaxial.
Systèmes supportés : PAL+ SECAM
Mémorisation des numéros des chaînes : 1000 (DTV),100 (ATV)
TV(RF): 75Ω asymétrique
Entrée vidéo AV : 75Ω, 1V-P, RCA
Entrée audio AV : 20KΩ, 500mB RMS
Entrée Vidéo YPbPr/HDMI : 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Interactivité numérique.
Texte numérique.
Sous-titrage radiodiffusion vidéonumérique (Digital Video Broadcasting) (DVB)
disponible.
Caractéristiques Configuration automatique.
Recherche automatique des nouvelles chaînes.
numériques : Guide programme en cours et suivant.
Guide électronique des programmes (EPG) de 7 jours.
Compatible récepteur numérique.
Logement pour carte CI.
Compatible Audio Description.
Tuner UHF/VHF ; Veille automatique ; Évaluation parentale ; image et texte
2 piles AAA pour la télécommande (incluses).
Dimensions du support de montage VESA : 100 mm x 100 mm
Dimensions du paquet (LxHxP) : 616x426x135mm
Autres caractéristiques : Dimensions du poste (LxHxP) avec socle : 513x355x160 mm
Dimensions du poste (LxHxP) sans socle : 513x312x42 mm
Poids du paquet :4.1 kg
Poids du poste avec socle :2.9 kg
Poids du poste sans socle : 2.7 kg
DVB-T, DVB-C
Décodeur Tuner DTV Modulation QAM 16/32/64/128/256/ Modulation QPSK FR
MPEG2, MPEG4, H.264
2 prises HDMI.
1 prise péritel.
Prise d'entrée PC.
Prise vidéo composante.
Composite.
1 port USB.
Connectivité : 1 Prise casque.
1 Prise Coaxial.
Systèmes supportés : PAL+ SECAM
Mémorisation des numéros des chaînes : 1000 (DTV),100 (ATV)
TV(RF): 75Ω asymétrique
Entrée vidéo AV : 75Ω, 1V-P, RCA
Entrée audio AV : 20KΩ, 500mB RMS
Entrée Vidéo YPbPr/HDMI : 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Interactivité numérique.
Texte numérique.
Sous-titrage radiodiffusion vidéonumérique (Digital Video Broadcasting) (DVB)
disponible.
Caractéristiques Configuration automatique.
Recherche automatique des nouvelles chaînes.
numériques : Guide programme en cours et suivant.
Guide électronique des programmes (EPG) de 7 jours.
Compatible récepteur numérique.
Logement pour carte CI.
Compatible Audio Description.
Tuner UHF/VHF; Veille automatique ; Évaluation parentale ; image et texte
2 piles AAA pour la télécommande (incluses).
Dimensions du support de montage VESA : 100 mm x 100 mm
Dimensions du paquet (LxHxP) : 650x440x135mm
Autres caractéristiques : Dimensions du poste (LxHxP) avec socle : 568x386x160 mm
Dimensions du poste (LxHxP) sans socle : 568x344x42 mm
Poids du paquet :4.9 kg
Poids du poste avec socle :3.74kg
Poids du poste sans socle : 3.5 kg
DVB-T, DVB-C
Décodeur Tuner DTV Modulation QAM 16/32/64/128/256 /Modulation QPSK
MPEG2, MPEG4, H.264
2 prises HDMI.
1 prise péritel.
Prise d'entrée PC.
Prise vidéo composante.
Composite.
1 port USB.
Connectivité : 1 Prise casque.
1 Prise Coaxial.
Systèmes supportés : PAL+ SECAM
Mémorisation des numéros des chaînes : 1000 (DTV),100 (ATV)
TV(RF): 75Ω asymétrique
Entrée vidéo AV : 75Ω, 1V-P, RCA
Entrée audio AV : 20KΩ, 500mB RMS
Entrée Vidéo YPbPr/HDMI : 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Interactivité numérique.
Texte numérique.
Sous-titrage radiodiffusion vidéonumérique (Digital Video Broadcasting) (DVB)
disponible.
Caractéristiques Configuration automatique.
Recherche automatique des nouvelles chaînes.
numériques : Guide programme en cours et suivant.
Guide électronique des programmes (EPG) de 7 jours.
Compatible récepteur numérique.
Logement pour carte CI.
Compatible Audio Description.
Tuner UHF/VHF ; Veille automatique ; Évaluation parentale ; image et texte
2 piles AAA pour la télécommande (incluses).
Dimensions du support de montage VESA : 200 mm x 100 mm
Dimensions du paquet (LxHxP) : 810x480x120mm
Autres caractéristiques : Dimensions du poste (LxHxP) avec socle : 642x435x170mm
Dimensions du poste (LxHxP) sans socle : 642x390x44mm
Poids du paquet :6.5 kg
Poids du poste avec socle :5.3 kg
Poids du poste sans socle : 5.0 kg
DVB-T, DVB-C
Décodeur Tuner DTV Modulation QAM 16/32/64/128/256 /Modulation QPSK FR
MPEG2, MPEG4, H.264
2 prises HDMI.
1 prise péritel.
Prise d'entrée PC.
Prise vidéo composante.
Composite.
1 port USB.
Connectivité : 1 Prise casque.
1 Prise Coaxial.
Systèmes supportés : PAL+ SECAM
Mémorisation des numéros des chaînes : 1000 (DTV),100 (ATV)
TV(RF): 75Ω asymétrique
Entrée vidéo AV : 75Ω, 1V-P, RCA
Entrée audio AV : 20KΩ, 500mB RMS
Entrée Vidéo YPbPr/HDMI : 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Interactivité numérique.
Texte numérique.
Sous-titrage radiodiffusion vidéonumérique (Digital Video Broadcasting) (DVB)
disponible.
Caractéristiques Configuration automatique.
Recherche automatique des nouvelles chaînes.
numériques : Guide programme en cours et suivant.
Guide électronique des programmes (EPG) de 7 jours.
Compatible récepteur numérique.
Logement pour carte CI.
Compatible Audio Description.
Tuner UHF/VHF; Veille automatique ; Évaluation parentale ; image et texte
2 piles AAA pour la télécommande (incluses).
Dimensions du support de montage VESA :200 mm x 100 mm
Dimensions du paquet (LxHxP) : 880x550x137mm
Autres caractéristiques : Dimensions du poste (LxHxP) avec socle : 738.5x487.5x170mm
Dimensions du poste (LxHxP) sans socle : 738.5x443x64mm
Poids du paquet :6.8 kg
Poids du poste avec socle :5.0 kg
Poids du poste sans socle : 4.7 kg
LE22M600CF
LE24M600CF
LE28M500C
LE28M600C
LE32M600C
Inhoud
01 Veiligheid en waarschuwingen PICTURE MENU 21
Welkom 2 AUDIO MENU 21
Belangrijke informatie 2 CLOCK MENU 22
Mededeling over de veiligheid 3 SETUP MENU 22
Waarschuwingen En Voorzorgsmaatregelen 4 VERGRENDELINGSMENU 22
EPG-MENU (electronische programmagids) 23
02 Introductie PVR-bestandssysteem(alleen voor DTV) 23
Belangrijkste kenmerken 5 Voorbereiding om een programma op te nemen 24
Montagewijze à Monteren 7 Het programma opnemen 24
Richtlijnen voor monteren aan een muur 8 De opname afspelen 24
Het voorpaneel 10 Tijdsverschuiving 25
AV-verbindingen 11 USB-speler 26
Het aansluiten van uw tv 12
Common interface 15 05 Oplossen van problemen
Oplossen van problemen 28
03 Afstandsbediening
Afstandsbediening 16 06 Specificatie
Insertion des piles dans la télécommande 16 Specificatie 31
TÉLÉTEXTE 17
04 DE WERKING
Installatiegids 18
KANAAL MENU 18
Automatisch afstemmen (DVB-T ) 18
Automatisch afstemmen (DVB-C) 19
DTV handmatig afstemmen (DVB-T ) 20
DTV handmatig afstemmen (DVB-C) 20
ATV handmatig afstemmen 20
Programma wijzigen 20
Common Interface 21
Signaal informatie 21
Software-update (USB) 21
01 Veiligheid en waarschuwingen
WELKOM
Hartelijk dank voor de aanschaf van deze 22”/24"/28"/32" LED/LCD-tv. Deze handleiding zal u helpen bij
het opzetten en het gebruik van uw tv.
Controleer eerst de inhoud van de doos, met de onderdelen die vermeld staan op de onderstaande lijst: DU
22” Full HD 1080P LED/LCD-tv 24” Full HD 1080P LED/LCD-tv
Afstandsbediening Afstandsbediening
2x AAA batterijen 2x AAA batterijen
Handleiding Handleiding
Snelle startgids Snelle startgids
Garantiekaart Garantiekaart
Schroeven Schroeven
Stand Stand
28” HD-voorbereide LED/LCD-tv 32” HD-voorbereide LED/LCD-tv
Afstandsbediening Afstandsbediening
2x AAA batterijen 2x AAA batterijen
Handleiding Handleiding
Snelle startgids Snelle startgids
Garantiekaart Component kabel
Schroeven Garantiekaart
Stand Schroeven
Stand
Nu kunt u beginnen!
BELANGRIJKE INFORMATIE
LEES EERST ALLE INSTRUCTIES DOOR EN BEWAAR DEZE HANDLEIDING VOOR LATERE VERWIJZING.
LET OP!
KANS OP EEN ELEKTRISCHE SCHOK
NIET OPENEN
LET OP!
MAAK DE AFDEKPLAAT (OF ACHTERKANT ) NIET OPEN, DIT OM HET RISICO VAN EEN ELEKTRISCHE SCHOK
TE VOORKOMEN. ER BEVINDEN ZICH GEEN GEBRUIKERSONDERDELEN IN DIT APPARAAT. NEEMT U CONTACT
OP MET DE KLANTENDIENST VOOR EVENTUELE PROBLEMEN. ER BEVINDT ZICH EEN BLIKSEMSCHICHT/
PIJLSYMBOOL IN DE DRIEHOEK. DIT SYMBOOL GEEFT AAN DAT ER ZICH EEN HOOG VOLTAGE BINNENIN
BEVINDT. HET KAN GEVAARLIJK ZIJN OM ELKE VORM VAN CONTACT TE MAKEN MET DE ONDERDELEN
BINNENIN DIT PRODUCT. ER BEVINDT ZICH EEN UITROEPTEKEN IN DE DRIEHOEK: DIT SYMBOOL ATTENDEERT
U EROP DAT ER BELANGRIJKE LITERATUUR MEEGELEVERD IS BIJ DIT PRODUCT BETREFFENDE HET
ONDERHOUD EN INBEDRIJFSTELLING.
LET OP:PLAATS HET TV-TOESTEL NIET IN DE BUURT VAN VOCHTIGHEID, DIT OM HET RISICO
VAN ELEKTRISCHE SCHOKKEN EN BRAND TE VERMIJDEN. GEBRUIK GEEN SCHURENDE
SCHOONMAAKMIDDELEN DIE KRASSEN OF SCHADE AAN HET LCD-SCHERM KUNNEN
AANBRENGEN. VOORKOM CONTACT MET VOORWERPEN DIE HET LCD-SCHERM KUNNEN
BESCHADIGEN.
OPMERKING:HET ONDERHOUDEN VAN HET APPARAAT DOOR UZELF IS NIET TOEGESTAAN
EN KAN TOT LETSEL LEIDEN, OF TOT SCHADE AAN HET PRODUCT. NEEM CONTACT OP MET DE
KLANTENDIENST VOOR AL HET ONDERHOUD.
KENNISGEVING OVER
DE VEILIGHEID
Waarschuwing: Verwijder de afdekplaat of
achterkant niet om het risico van een
elektrische schok te voorkomen. Er bevinden
zich geen gebruikersonderdelen binnen in het
apparaat. Laat onderhoud over aan
gekwalificeerd personeel.
Waarschuwing: Het apparaat mag niet Deze afbeelding geeft aan dat dit product niet
blootgesteld staan aan regen of vocht om brand weggegooid mag worden met ander
of een elektrische schok te voorkomen. huishoudelijk afval in de gehele Europese
Gemeenschap. Zorg voor verantwoord recyclen
Stel de product niet bloot aan water (druppels zodat het duurzaam hergebruik van
of spatten) en plaats geen objecten gevuld met grondstoffen bevorderd wordt en om mogelijke
vloeistoffen zoals vazen op het apparaat. schade aan het milieu of de menselijke
gezondheid te voorkomen door
Houd het product uit de buurt van direct ongecontroleerde afvalverwijdering. Breng uw
zonlicht en warmtebronnen zoals radiatoren of gebruikte apparaat naar het grofvuil of neem
kachels. contact op met uw winkelier waar dit product
gekocht is om uw gebruikte apparaat in te
Blokkeer de ventilatie-openingen niet. Sleuven leveren. Zij kunnen voor een milieuveilige
en openingen van het apparaat zijn bedoeld recycling van dit product zorgen.
voor ventilatie. De openingen mogen nooit
geblokkeerd worden door uw product op een
kussen, bank of soortgelijk oppervlak te
plaatsen.
WAARSCHUWINGEN EN
VOORZORGSMAATREGELEN
Voorzorgsmaatregelen DU
Zorg ervoor dat het snoer zich nooit onder de
televisie-ontvanger bevindt.
Waarschuwing
Deze televisie-ontvanger gebruikt hoge
spanningen tijdens de werking. Verwijder de
afdekplaat of achterkant van dit apparaat niet.
Laat onderhoud aan gekwalificeerd personeel
over.
Voorzorgsmaatregelen
Leun of sta nooit op de televisie of standaard, of
druk er niet plotseling tegenaan. Besteed
speciale aandacht aan kinderen. Een ernstig letsel
kan veroorzaakt worden indien het toestel valt.
Waarschuwing
Stel de televisie-ontvanger nooit bloot aan
regen of vocht om brand of een elektrische
schok te vermijden.
Voorzorgsmaatregelen
Plaats uw televisie niet op een onstabiel karretje,
standaard, plank of tafel. Een ernstig letsel aan
een individu of schade aan de televisie kan
veroorzaakt worden indien het valt.
Waarschuwing
Laat dit product niet vallen, duw geen
objecten in de gleuven of openingen van de
televisie. Mors nooit enige vloeistof op de Voorzorgsmaatregelen
televisieontvanger. Het is raadzaam om de stekker uit het stopcontact te
halen wanneer de televisie-ontvanger langere tijd niet
gebruikt wordt.
Minimum afstanden
Dim:515*320mm(不包括底座)
Voorzorgsmaatregelen
Voorzorgsmaatregelen Indien de televisie ingebouwd wordt in een
Blokkeer de ventilatie-openingen aan de compartiment of soortgelijke behuizing, moeten
achterkant niet. Voldoende ventilatie is de minimum afstanden gehandhaafd worden.
essentieel om te voorkomen dat elektrische Warmte-ontwikkeling kan de levensduur van uw
componenten falen. televisie verkorten en kan ook gevaarlijk zijn.
02 Introductie
OPGELET INSTALLATIE
Knoei nooit met onderdelen binnenin de TV of * Plaats de TV zodanig dat er geen direkt
andere instelknoppen die niet in deze handleiding zonlicht op het scherm schijnt.
beschreven zijn.Alle LED-TV's zijn hoogspanning * Totale duisternis of een reflectie op het
elektrische apparatuur. beeldscherm kan leiden tot vermoeide ogen.
Wanneer u afstoft of er water aan het scherm, de kast, Zachte en indirecte verlichting wordt
rond de knoppen of aansluitingen komt, moet het aanbevolen voor meer kijkcomfort.
netsnoer uit het stopcontact worden verwijderd. * Laat voldoende ruimte tussen de tv en de
Veeg de TV af met een zachte, droge, stofvrije doek. muur om ventilatie mogelijk te maken.
Ontkoppel het netsnoer en de antenne/antennekabel * Vermijd uitzonderlijk warme plaatsen om
tijdens onweer om schade aan uw TV en eventuele schade aan de kast of voortijdig falen van een
andere aangesloten apparaten te voorkomen. component te voorkomen.
Alle reparaties aan deze TV mogen alleen door * Bedek de ventilatie-openingen niet
gekwalificeerd TV-onderhoudspersoneel worden wanneer de tv in gebruik is.
uitgevoerd.
Belangrijkste kenmerken
1 Kan gebruikt worden als televisie,
beeldscherm, pc-scherm;
2 Hoge helderheid, brede kijkhoek; 4 HDMI-interface en SCART-interface;
3 Tijdsverschuiving; 5 NICAM;
Belangrijkste kenmerken
Paneel 22 24 28 32
tv-systeem PAL-B/G, I, D/K
SECAM-B/G, D/K, L
DVB-T, DVB-C
Signaal videosysteem PAL/SECAM/MPEG2/MPEG4/H.264
Opslag aantal kanalen 1000 (DTV),100 (ATV)
Ingang voedingsspanning AC 100-240V 50/60Hz
Energieverbruik 38 W 40 W 41 W 50 W
Energieverbruik Stand-by <0.30W
Vermogen audio-uitgang
2 x 3W 2 x 3W 2 x 8W 2 x 8W
(THD ≤ 7%)
Ingangs signaal Analoge RGB(PC) x1; PC audio x1
Hoge definitie multi-media interface (HDMI) x2
Samengestelde-ingang x1
Y/Pb/Prx1
Scart-ingang x1
CI x 1
USB x 1
Tuner x 1
RF Co-Ax x 1
uitgangs signaal Hoofdtelefoon x 1
COAXIAAL x 1
Scart-uitgang
Samengestelde video-ingang >=350
Horizontale definitie (TV-lijn)
YPbPr >=400
PC
ONDERSTEUNDE MODUS
DU
RESOLUTIE V.Freq. (Hz) H. Freq. (KHz)
1 640x480 60 31.47
2 800x600 60 37.88
3 1024x768 60 48.36
4 1366x768 60 47.7
5 1280x1024 60 63.98
6 1920x1080 60 66.64
(alleen voor 22”,24”)
Montagewijze à Monteren
1. Plaats de tv, met het scherm naar beneden, 2. Bevestig de onderkant door de schroef
op een vlakke ondergrond. Gebruik een doek stevig op de voet aan te draaien.
om het scherm te beschermen. Plaats de kolom
van de steunbasis op de onderzijde van de TV.
(22",24")
(28")
(32")
INSTALLATIE-OPMERKINGEN
Zoek een plek voor de tv in een kamer waar er geen rechtstreeks licht op het scherm valt.
Totale duisternis of een reflectie op het scherm kan leiden tot vermoeidheid van de ogen.
Zachte en indirecte verlichting wordt aanbevolen voor meer kijkcomfort.
Laat voldoende ruimte tussen de tv en de muur om ventilatie mogelijk te maken.
Deze televisie niet draaien a.u.b.!
Vermijd uitzonderlijk warme plaatsen om schade aan de kast of voortijdig falen van een
component te voorkomen.
1. Zet de ondersteunende pilaarvoet op het voetstuk in de richting van de aangegeven pijl en zet
deze vervolgens vast met drie schroeven.
DU
(22",24")
(28")
(32")
100mm
M4X5 M4X5
100mm
M4X5 M4X5
(22",24")
200mm
M4X5 M4X5
100mm
M4X5 M4X5
(28")
200mm
M4X5 M4X5
100mm
M4X5 M4X5
(32")
Het voorpaneel(22",24",28")
SOURCE 1
2 1 MENU 2 DU
CH+
3
CH-
VOL+
30 30
≤8m 4
VOL-
STANDBY 5
Het voorpaneel(32")
3
SOURCE 1
MENU 2
CH+
2 1 3
CH-
VOL+
4
VOL-
STANDBY 5
30 30
≤8m
Achter/zijcontacten(22",24",28")
4
1 2 3 5
COMMON INTERFACE (CI)
USB HDMI2(ARC) HDMI1
6 7 8 9 10 11 12 13
Achter/zijcontacten(32")
AC-INPUT
100-240V~ 50/60Hz DIGITAL AUDIO OUTPUT
YPbPr VIDEO L R (COAXIAL) SCART
1 2 3 4 5 6
7 8 9 10 11 12 13 14
Versterker
DU
G B R
Y W R
CVBS, DVD-speler of ander
apparaat met CVBS/S-Video
Audio/Video-apparaat
met HDMI-interfaces
G Groen (Y)
B Blauw (Pb/Cb)
W Wit (AUDIO-L )
R Rood (AUDIO-R, Pr/Cr)
Y Geel (VIDEO)
Versterker
Y W R
AC-INPUT
100-240V~ 50/60Hz DIGITAL AUDIO OUTPUT
YPbPr VIDEO L R (COAXIAL) SCART
G B R
Audio/Video-apparaat
met HDMI-interfaces
Aansluiten op uw Haier TV
Een DVD-speler/set-top box satelliet- of Optie 5 VGA (15pins Sub-D)
kabelontvanger/spelconsole/PC of Laptop
aansluiten. Sluit een VGA-kabel (niet meegeleverd) aan
Er zijn verschillende opties om een DVD-speler/set-top vanaf de VGA-aansluiting op de TV naar de
box satelliet- of kabelontvanger/spelconsole/PC of PC/Laptop.
Laptop op uw TV aan te sluiten. Druk op de “SOURCE"-toets op de
afstandsbediening om de PC/Laptop te selecteren DU
Optie1 SCART
dat met de VGA-kabel is aangesloten, gebruik de
Sluit een SCART-kabel (niet meegeleverd) aan vanaf “▼▲”-toetsen om “PC” te selecteren en druk op
de SCART-aansluiting op de TV naar de DVD-speler/set- de “OK”-toets.
top box satelliet- of kabelontvanger of spelconsole. Opmerking: VGA is alleen video. Voor audio van uw
Druk op de “SOURCE"-toets op de afstandsbediening PC/Laptop moet u een aparte kabel vanaf de PC-
om het apparaat te selecteren dat met de SCART-kabel is
aangesloten, gebruik de “▼▲”-toetsen om “SCART” te Audio (3,5 mm bus) op de
selecteren en druk op de “OK”-toets. hoofdtelefoonaansluiting op uw PC/Laptop (3,5
Opmerking: De TV zal standaard de SCART-aansluiting mm bus) aansluiten.
instellen wanneer de TV wordt ingeschakeld.
Optie 6 USB
Optie 2 HDMI1/HDMI2 De meeste USB-sticks kunnen op uw TV worden
aangesloten en sommige digitale camera's kunnen ook
Als het apparaat waarop u wilt aansluiten is
werken.
ingeschakeld, schakel eerst het apparaat uit.
Sluit een HDMI-kabel (niet meegeleverd) aan vanaf Sluit de USB-stick (niet meegeleverd) of een USB-kabel
de HDMI-aansluiting op de TV naar de DVD-speler/set- (niet meegeleverd) aan op de TV.
top box satelliet- of kabelontvanger of spelconsole. Druk op de “SOURCE"-toets op de
Schakel het apparaat in dat u net op de TV hebt afstandsbediening om het USB-apparaat te
aangesloten. selecteren dat op de TV is aangesloten, gebruik de
Druk op de “SOURCE"-toets op de afstandsbediening
om het apparaat te selecteren dat met de HDMI-kabel is “▼▲”-toetsen om “USB” te selecteren en druk
aangesloten, gebruik de “▼▲”-toetsen om “HDMI” te op de “OK”-toets.
selecteren en druk op de “OK”-toets. Opmerking1: Alleen bestandsformaten *.jpg, *.mp3, *.txt,
*.avi,* en .mp4 zullen werken, andere bestandstypes zijn
Optie 3 AV Audio Visual niet gegarandeerd en werken mogelijk niet.
Opmerking 2: Apple iPhones en iPods zijn niet met
(Geel/wit/rood) uw TV compatibel.
Zorg ervoor dat zowel de TV als het apparaat vóór het
aansluiten zijn uitgeschakeld. Opmerking 3: Wanneer u een apparaat op de USB-
Sluit de AV-kabel (niet meegeleverd) aan vanaf de aansluiting aansluit, houd de lengte van de USB-
video- (geel) en audio-aansluitingen (wit, rood) op de TV kabel zo kort mogelijk.
naar de DVD-speler of spelconsole enz.
Druk op de “SOURCE"-toets op de afstandsbediening
Optie 7 HOOFDTELEFOONUITGANG
om het apparaat te selecteren dat met de AV-kabel is
Steek de stekker van de hoofdtelefoon in de
aangesloten, gebruik de “▼▲”-toetsen om “AV” te
selecteren en druk op de “OK”-toets. hoofdtelefoonaansluiting op de TV. De luidsprekers van de
TV zijn nu uitgeschakeld (gedempt). Daarnaast kunt u ook
Optie 4 COMPONENT externe luidsprekers aansluiten, indien nodig.
(Groen/blauw/rood) + (wit/rood)
Optie 8 DIGITALE AUDIO-UITGANG (COAXIAAL)
Zorg ervoor dat zowel de TV als het apparaat vóór het
aansluiten zijn uitgeschakeld. COAXIAAL is een digitale audioverbinding gebruikt voor
Sluit de kabels (niet meegeleverd) aan vanaf de het over korte afstanden aansluiten van audioapparatuur,
“COMPONENT IN”-aansluitingen Y, Pb, Pr (groen, blauw, bijvoorbeeld thuistheaters en andere digitale HiFi-
rood) en L-Audio-R (wit, rood) op de TV naar de DVD- systemen. Het signaal wordt doorgegeven over een
speler of spelconsole enz. coaxiale kabel met RCA-connectors.
Druk op de “SOURCE"-toets op de afstandsbediening Zorg ervoor dat zowel de TV als het apparaat vóór het
om het apparaat te selecteren dat met de COMPONENT- aansluiten zijn uitgeschakeld.
kabel is aangesloten, gebruik de “▼▲“-toetsen om Sluit de AV-kabel (niet meegeleverd) aan vanaf de
“YPbPr” te selecteren en druk op de “OK”-toets. COAXIAAL-aansluiting op de TV naar het geluidssysteem
van het thuistheater of digitaal HiFi-systeem enz.
COMMON INTERFACE
De common interface -gleuf (common interface of CI) is Gedetailleerde informatie over de CI-kaart die
ontworpen om de conditionele toegang-module (CA) en in gebruik is, wordt weergegeven.
smartkaart te aanvaarden, dit om het mogelijk te maken Druk op de OK-toets om het kaartmenu te openen.
om naar betaal-tv en aanvullende diensten te kijken. Wij verwijzen naar de modulehandleiding voor het
Neemt u contact op met de installateur van de common instellen van de details.
interface voor meer informatie betreffende modules en
abonnementen. Let op, CA-modules en smartkaarten zijn Wanneer de module verwijderd is, zal het
volgende bericht op het scherm verschijnen:
geen optionele accessoires van ons.
CAM verwijderd
Waarschuwing
Schakel uw tv uit voordat u een module in de
common interface -gleuf stopt.
CI-GLEUF
CAM
Smartkaart
CAM geplaatst
Automatisch scannen
Kanaal
Handmatige scan
Beeld Kanaal bewerken
Common interface
Audio Signaal informatie
Software Update(USB)
Klok
Instelling
Slot
03 Afstandsbediening
SCREEN Indrukken om de aspectverhouding van het scherm
te wijzigen.
16 Indrukken om het schermmenu te openen. In
teletekstmodus, indrukken om de INDEX-pagina
te openen.
17
Indrukken om het schermmenu te navigeren.
OK Indrukken ter bevestiging van een selectie. DU
In teletekstmodus, indrukken om de mixmodus
te openen.
(achteruit) Indrukken om in multimediamodus en
timeshiftmodus vooruit of terug te spoelen
(vooruit)
(Rode en Groene toets in teletekstmodus)
Indrukken om de teletekstfunctie in/uit te
schakelen, en de TTX-modus te wijzigen.
Indrukken om af te spelen/te pauzeren in
18 (start/pauze) multimediamodus, timeshift in DTV-modus.
TELETEKST
Teletekst is een informatiesysteem dat door bepaalde zenders uitgezonden wordt en geraadpleegd kan
worden zoals een krant. Het biedt ook toegang tot ondertiteling voor kijkers met gehoorsproblemen of
die niet vertrouwd zijn met de taal van een uitzending (kabelnetwerken, satellietkanalen enz.).
E
Druk op: U verkrijgt:
Dit wordt gebruikt om de teletekst-optie op te openen of te verlaten. De
TEKST inhoud wordt weergegeven in een lijst van pagina's die geraadpleegd kan
worden. Elke pagina heeft een overeenkomstige 3-cijferig paginanummer.
Voer het nummer van de gewenste pagina met de 0 t/m 9 toetsen in of met de
EEN PAGINA SELECTEREN pijlen omhoog/omlaag. Bijvoorbeeld: voor pagina 120, kiest u 120. Het
nummer verschijnt in de linkerbovenhoek, de teller draait en hierna wordt de
pagina weergegeven. Herhaal deze handeling om een andere pagina te
bekijken. Als de teller blijft zoeken, betekent dit dat de pagina niet
uitgezonden wordt. Selecteer dan een ander nummer.
DIRECT TOEGANG TOT Gekleurde toetsen bevinden zich aan de onderkant van het scherm. De
RUBRIEKEN vier gekleurde toetsen worden gebruikt om de overeenkomstige
rubrieken of pagina's te openen. De gekleurde velden knipperen
wanneer de rubriek of de pagina nog niet beschikbaar is.
04 WERKING
Installatiehandleiding
Eerste instelling
Het configuratiescherm zal verschijnen wanneer de TV voor
de eerste keer wordt ingeschakeld of naar de OSD-taal Nederlands
fabrieksinstellingen wordt gereset. Modusinstelling Thuismodus
Antennenart Kabel
DU
OSD-taal Nederlands
Kabel Snel
Modusinstelling Thuismodus
Automatisch scannen DTV+ATV
3). Druk op de “◄►”-toetsen om “Antenna Type” op “Air” 1.2 )Automatisch afstemmen (DVB-C)
(betekent DVB-T) in te stellen. 1).Druk op de “MENU”-toets en druk vervolgens op de “▼
▲”-toetsen om het “Channel”-menu te selecteren en
Kanaal Antenne type Air druk vervolgens op de “OK”-toets.
Land Netherland 2).Druk op de “▼▲”-toetsen om “Auto Tuning” te
Beeld Modus DTV+ATV selecteren en druk vervolgens op de “OK”-toets.
Start
Audio Antenne type Kabel
Kanaal
Land Netherlands
Klok
Beeld Modus DTV+ATV
Start
Instelling Audio
Slot Klok
wilt overslaan, wijzig de vooraf ingestelde volgorde of 6).Het afstemmen van de kanalen zal beginnen. Deze
hernoem kanalen, selecteer “Program Edit” onder het bewerking kan tot enkele minuten duren. De display zal de
“Channel ”-menu. voortgang van het afstemmen en het aantal gevonden
kanalen weergeven.
Scannen Ch12 7).Als u het DTV-afstemmen wilt overslaan, druk op de
Kanaal
“MENU”-toets om het afstemmen halverwege te
Digitale kanalen gevonden
Beeld onderbreken. Vervolgens gaat u rechtstreeks naar ATV-
DTV: 3
Radio: 0 afstemmen. U kunt de bovenstaande stap herhalen als u
Audio
Data: 0 ook het ATV-afstemmen wilt overslaan. Een
Analoge kanalen gevonden: 0 installatieherinnering zal de volgende keer dat u de TV
Klok
inschakelt verschijnen, als geen kanaal wordt gevonden.
Instelling
8).Nadat het afstemmen voltooid is, zijn de kanalen in een
vooraf ingestelde volgorde gerangschikt. Als u kanalen wilt
Slot
overslaan, wijzig de vooraf ingestelde volgorde of hernoem
MENU Overslaan EXIT Afsluiten kanalen, selecteer “Program Edit” onder het “Channel ”-
menu.
Opmerking
Alle kanalen met inbegrip van ATV, DTV en Radio kunnen Frequentie 474000K
Kanaal
Symboolsnelheid 6875K
in één keer worden afgestemd, als het afstemtype DTV +
Beeld Modulatie Auto
ATV is. Start
Audio
Eerder opgeslagen zenders zullen na het automatisch
afstemmen verdwijnen. Klok
“▼▲”-toetsen om het "Channel"-menu te selecteren 2). Het DVB-C Handmatige Tuningscherm zal verschijnen.
en druk vervolgens op de “OK”-toets. Druk op de ▼▲ toetsen om ks/s/QAM-Type
2). Druk op de “▼▲” -toetsen om “DTV Manual Tuning” (Frequentie/Symbool) te selecteren, druk op OK om
te selecteren en druk vervolgens op de “OK”-toets. Als u Frequentie en Symbool in te voeren, druk op◀▶om het
“Air” in “Auto Scan” selecteert, opent u het handmatige QAM-type te veranderen, druk op Start om het zoeken
scanmenu van DVB-T. naar dat kanaal te starten. Wanneer het signaal is
afgestemd, zal het beeld en de signaalsterkte op het
Kanaal
Digitaal scannen Ch5 scherm worden weergegeven.
Start
3).Druk op de “MENU”-toets om naar het hoofdmenu
Beeld Sterkte 54
terug te keren.
Audio
4).Druk op de “EXIT”-toets om het menu te verlaten.
Klok 3) ATV handmatig afstemmen:
Instelling
U kunt het geluidsysteem veranderen om naar analoge
TV-kanalen te zoeken en fijn af te stellen, sla hierna de
Slot kanalen op die u geselecteerd hebt.
MENU Terug Verplaatsen OK OK
ATV handmatig zenderzoeken
3). Het “DTV Manual Tuning”-scherm zal verschijnen. Opslaan op 1
Druk op de “◄►”-toetsen om het gewenste UHF-kanaal te Systeem BG
selecteren of druk op de “OK”-toets om vervolgens het Huidig CH1
kanaalnummer in te voeren. Selecteer “Start” om met het
Zoeken
zoeken van dat kanaal te beginnen. Wanneer het signaal is
Fijn afstemmen
afgestemd, zal het beeld en de signaalsterkte op het
Frequency 44.25 MHz
scherm worden weergegeven.
Opslaan
Programma bewerken
Opmerking
001 The HITS DTV
002 TMF DTV
Wij raden u aan om de fabriekinstellingen te herstellen (zie
003 UKTV Br’tldeas DTV “Restore Factory Default ”in het “Setup”-menu) om ervoor te
004 f th DTV zorgen dat de upgrade van het apparaat slaagt.
005 Ideal World DTV
006 Colourbars100 DTV 2. PICTURE MENU
001 Kiss Radio
002 Smash Hits! Radio
Het tweede onderdeel van het menu is het “Picture”-menu.
003 Kerrang! Radio U kunt hier het beeldeffect, zoals contrast, helderheid, etc.
Verwijderen Overslaan instellen. Druk op de “▼▲”-toets om te verplaatsen,
Verplaatsen Rernoemen FAV Favoriet
druk op de “OK”-toets om in te stellen.
Verwijderen: Druk op de rode toets om het kanaal die u Beeldmodus Standaard
hebt gemarkeerd te verwijderen. Kanaal
Helderheid 50
OVERSLAAN: Druk op de gele toets om de “Skip”-functie te Contrast 45
Beeld
selecteren en een “SKIP”-pictogram zal naast het Scherpte 60
programma worden weergegeven en het zal bij het Audio
Kleur 45
veranderen van het kanaal worden overgeslagen. Tint 0
VERPLAATSEN: Druk op de groene toets om het Klok
DNR Gemiddeld
geselecteerde kanaal te markeren dat u wilt verplaatsen. Dynamic Contrast Gemiddeld
Instelling
Een pictogram zal voor het kanaalnummer worden Beeldverhouding 16:9
weergegeven. Druk vervolgens op de “▼▲”-toetsen om Kleurtemperatuur Normaal
Slot
naar een nieuwe positie te verplaatsen en druk op de Achtergrondverlichting 14
groene toets om te bevestigen. MENU Terug Verplaatsen OK OK
Hernoemen: (Alleen voor ATV ) Druk op de blauwe toets om
het kanaal te hernoemen. Druk herhaaldelijk op een Opmerking
cijfertoets om door de tekens te rouleren om een nieuwe 1).De drie selecteerbare modi voor de kleurtemperatuur
naam in te voeren en druk op de “OK”-toets om te zijn normaal, warm en koel.
bevestigen (de cijfertoetsen zijn als in de volgende tabel). 2).PC Instelling is alleen beschikbaar in PC modus en
1 2 3 biedt de opties Horizontale positie, Verticale positie,
abc def Grootte en Fase.
4 5 6
3.AUDIO MENU
ghi jkl mno
Het derde onderdeel van het menu is het “Audio”-menu.
7 8 9 Hier kunt u het geluidseffect zoals hoge en lage tonen en
pqrs tuv wxyz balans enz. regelen.
Druk op de “▼▲”-toetsen om te verplaatsen, druk op de
FAV: Druk op de “FAV”-toets (in plaats van de gekleurde
“OK”-toets om in te stellen.
toets) om het favoriete kanaal in te stellen. (Als u de lijst
met favoriete kanalen wilt bekijken, moet u het “Program Geluidsmodus Standaard
Kanaal
Edit”-menu afsluiten en vervolgens op de “FAV”-toets Hoge tonen 0
drukken.) Beeld
Lage tonen 0
Balans 0
5). Common Interface Audio Auto Volume Aan
Dit menu kan informatie van de CI-kaart weergeven. Surround Sound Uit
Klok
6). Signaal informatie (alleen voor DTV) SPDIF Auto
Druk op de “▼▲”-toetsen om “Signal Information” in het Audiobeschrijving
Instelling
“Channel”-menu te selecteren. Druk vervolgens op de “OK” Alleen audio Uit
-toets om de bijbehorende informatie van het huidige
Slot
kanaal weer te geven.
Terug Verplaatsen OK OK
7). Software-update (USB) MENU
uitschakelproces starten.
En een pop-up-venster zal op het scherm verschijnen. Slot
Na 150 seconden schakelt de TV automatisch naar de
stand-by. Druk op een willekeurige toets op de MENU Terug Verplaatsen OK OK
afstandsbediening om het automatisch uitschakelen te
annuleren. Het standaard wachtwoord is 0000, mocht u het wachtwoord
2. Om het automatisch uitschakelen te annuleren: zijn vergeten, gebruik dan het superwachtwoord: 9443.
Selecteer “Auto standby (4hr)” in het “Setup”-menu, het Kanaalvergrendelingen: Druk op ▼▲ om het programma
TV-scherm keert naar het “Setup”-menu terug en de optie te selecteren, druk op de OK-toets om het programma te
“Auto standby (4hr)” zal het volgende tonen: blokkeren. Als u de blokkering van het programma wilt
Auto standby (4hr) OFF opheffen, open a.u.b. het hoofdmenu, voer het wachtwoord
Om terug te keren naar automatische uitschakeling na 4 uur, in, selecteer het programma en druk vervolgens nog een
herhaal het bovenstaande maar gebruik echter pijltjestoets keer op de OK-toets. Ouderlijke classificatie: Druk op◀▶om
Links om “aan” te selecteren (4 uur). een classificatie te kiezen.
In het “PVR File System”-menu kunt u een USB-schijf voor
PVR instellen.
Druk op de “EPG”- of “VERLATEN”-toets om het U kunt op de rode toets drukken om de lijst met geplande
“EPG”-menu te verlaten. Druk er (Service) opnieuw op
om terug te keren. programma's weer te geven. U kunt ook de programma's
Verwijder één
EXIT Verwijder alle
Huidig spelend bestands info Recording
Kanaal naam BBC ONE
Zoom
Hot K
Key Programma naam Olympics 2012
Naar boven Recorded Time : 00 : 00 : 40
Opname tijd 2012/08/09 11:44 Available Time : 25 Minute
Naar onderen
OK
EXIT Selecteer Totale tijd 00:08:06
MENU Teruggaan
Druk nogmaals op de REC-toets om het menu te onthullen.
Omschrijving Matt Baker and Clare Balding
EXIT Exit present coverage of the eager... Druk op de Stoptoets om de opname te stoppen. U kunt
ook het “Mediaspeler”-menu openen om uw opgenomen
Device List: Dit submenu zal de USB-apparaten programma's via de “Film”-modus te bekijken.
weergeven die op het TV-toestel zijn aangesloten. U kunt
het apparaat selecteren en vervolgens op de rode toets De opname afspelen:
drukken om het USB-apparaat te formatteren. Het programma dat naar de “USB” is opgenomen,
zal in de map “USB record” op het apparaat worden
Apparaatlijst
Apparaat Beschikbare ruimte Opslag systeem
opgeslagen.
sda1 192 MB FAT32 U kunt het afspelen in PVR Bestandsysteem en in het
Functie
submenu Bestandmanager.
Formaat 1.De USB-opslaggrootte kan tussen 128 MB en 500
Hot key GB in grootte zijn, maar voor praktisch gebruik is 2
Naar boven
Naar onderen
GB tot 500 GB aanbevolen.
OK
EXIT Selecteer 2.De video kan korrelig worden als de bitsnelheid
MENU Teruggaan
EXIT Exit
van de video te laag is. Dit kan door het aansluiten
van een USB-verlengkabel worden veroorzaakt in
Scheduled Record: U kunt de lijst van geplande opnames plaats van de USB direct op de TV aan te sluiten.
hier instellen. En u kunt ook de geplande opnames, die u 3.Niet alle USB-apparaten zijn compatibel.
hebt ingesteld, verwijderen.
Geprogrameerde opname lijst
Geprogrameerde
Gep
p ro opname
Standby
Opmerking
Zorg ervoor dat het opslagapparaat dat wordt gebruikt Opnamebestand Afspelen
om op te nemen op de USB-poort op de achterkant van De Haier TV neemt het programma naar de USB-stick op
het apparaat is aangesloten en compatibel voor opname in “*.ts”-formaat “Time Shift”. Als een andere TV, PC,
is. Als uw opslagapparaat niet compatibel is, wordt u Laptop, DVD, of ander apparaat of randapparaat het
gevraagd om het te formatteren. Open het PVR “*.ts”-bestand (tijdverschuiving) niet ondersteunt of
Bestandsysteemmenu en selecteer Apparaatlijst om uw herkent dan zal het niet afspelen. “ts” is de indeling die
apparaat te formatteren. wordt gebruikt voor het uitzenden van high-definition
Wanneer het kanaal CI+ gebruikt wordt, zal er geen TV. U kunt “ts”-bestanden op een computer of laptop
opnamefunctie zijn. met de juiste software afspelen. Raadpleeg het Internet
of een IT-leverancier voor meer informatie over de
meest geschikte software.
Voorzichtig: Haier neemt geen enkele
9.Tijdsverschuiving verantwoordelijkheid voor software gedownload door
Druk op de “▶II ”-toets om het programma dat u bekijkt te een klant of leverancier en kan virussen bevatten of kan
pauzeren en de tijdverschuivingsfunctie te activeren. als gevolg van het installeren van de software, storing
Het onderstaande menu wordt getoond. Dit menu zal na veroorzaken. De klant gebruikt het op eigen risico.
enkele seconden automatisch verdwijnen.
00:00:00
00:00:05
Beschikbare tijd
Afspelen Pauze Stoppen FB FF 00:00:00/04:13:20
10.USB-speler
Druk op de “SOURCE”-toets en selecteer “USB” in de bronlijst, druk vervolgens op de “OK”-toets om het USB-menu te openen.
Zorg ervoor dat het USB-apparaat op de USB-poort is aangesloten. Er zijn vier type mediaonderdelen die geselecteerd
kunnen worden zoals foto's, muziek, film en tekst. Selecteer het type mediaonderdeel door op de “◄►”-toetsen te drukken,
druk op de “OK”-toets om het selectiemenu van de disk te openen.
Haier Innovation Life
DU
PHOTO Music Movie TEXT
Druk op de “▼▲” -toetsen om de juiste disk en de map te selecteren, druk op “OK”-toets om de lijst van mediabestanden
te openen. Druk op de rode toets om naar het selectiemenu van het mediatype terug te keren.
Selecteer het mediabestand door op de “◄►”- of “▼▲”-toetsen te drukken, vervolgens zal het voorbeeldvenster
verschijnen. Druk op de “►”-toets om het mediabestand op een volledig scherm af te spelen. Wanneer het filmbestand
wordt afgespeeld, druk op de “▼”-toets om de knoppenbalk weer te geven.
Photo
USB1/Pic
FOTO
Basisfunctie
Wanneer foto's worden weergegeven, druk op de “▼“-toets op de afstandsbediening om een helpbalk
onder het scherm weer te geven.
Afspelen/
Druk op de “PLAY/PAUSE”-toets op de afstandsbediening om af te spelen of te pauzeren.
Pauze
Druk op de blauwe toets om het snelmenu te openen om de intervaltijd aan te passen. Herhaal,
Snelmenu
diavoorstellingeffect en achtergrondmuziek (u kunt eerst muziek afspelen).
Music
USB1/Music
.. 1/1 Title:
Album:
10547672.mp3 Artist:
Track
14953359.mp3 Year: 2010-09-30
1/2
10547672
PLAY
00:00:53 00:00:00
MUZIEK
Wanneer muziek wordt afgespeeld, druk op de “►”-toets om de werkbalk te selecteren.
Basisfunctie
TEKST
Druk op de “▼▲“-toetsen om de vorige/volgende pagina te selecteren. Gebruik de cijfertoetsen en OK om naar
de gewenste pagina te springen.
Lijst van belangrijke bestandstypes die vanaf een USB-apparaat afspelen
Foto ”.jpg”-bestanden
Audio ”.mp3”-bestanden
Video .avi,.mp4
Tekst ”.txt”-bestanden
05 Probleemoplossing
Probleemsymtoom
Inspecteer of:
Beeld Audio DU
Antennepositie, richting of
Sneeuw Ruis aansluiting
Elektronische apparatuur/auto's/
Interferentie Lawaai motorfietsen/tl-verlichting
Problemen oplossen
Bij de meeste PC's en laptops wanneer aangesloten met een
Mijn TV geeft niet het beeld op mijn VGA-stekker (de blauwe 15-pins plug op uw PC of laptop),
laptop/PC weer wanneer moet u sommige toetsen op uw toetsenbord indrukken om een
aangesloten. beeld op een TV of andere externe display te krijgen. Dit is
meestal de F7 (Dell) of F4 (HP/Samsung) of F5 (Toshiba). Op
laptops moet u tegelijk op de "Fn"-toets en de "F"-toets
drukken.
06 Specificatie
22" Full HD 1080P LED/LCD-tv
Full HD
Beeldkwaliteit van de TV: Geïntegreerd digitaal.
Schermgrootte: 55 cm
Resolutie 1920 x 1080 pixels bij 50 Hz.
DVB-T, DVB-C
DTV-Tuner-decoder 16/32/64/128/256 QAM-modulatie/ QPSK-modulatie
MPEG2, MPEG4, H.264
2 HDMI-aansluitingen
1 SCART-aansluiting.
PC-ingangsaansluiting.
Component Video-aansluiting
Composiet.
1 USB-poort.
1 Hoofdtelefoonuitgang.
Connectiviteit:
1 COAXIAAL-poort.
Ondersteunde systemen: PAL + SECAM
Opslag aantal kanalen: 1000 (DTV),100 (ATV)
TV( RF): 75 Ω ongebalanceerd
AV-Video-ingang: 75 Ω, 1 V-P, RCA
AV-Audio-ingang: 20 KΩ, 500 mB RMS
YPbPr/HDMI-Video-ingang: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Standby-energieverbruik: <0.30W
Digitaal interactief.
Digitale tekst.
Digitale video broadcasting (DVB) ondertitels beschikbaar.
Automatisch configuratie.
Automatisch scannen naar nieuwe kanalen.
Digitale functies: Huidige en volgende programmagids.
7-daagse elektronische programmagids (EPG).
Top-up TV compatibel.
CI-sleuf.
Audiobeschrijving compatibel.
UHF/VHF-tuner; Slaaptimer;
Ouderlijke classificatie ; Beeld en tekst
2 x AAA batterijen voor de afstandsbediening (meegeleverd)
Afmeting VESA-montage: 100 mm x 100 mm
Extra functies: Pakketafmeting (LxBxH): 616x426x135mm
Set-afmeting (LxBxH) met standaard: 513x355x160 mm
Set-afmeting (LxBxH) zonder standaard: 513x312x42 mm
Pakketgewicht: 4.1kg
Set-gewicht met standaard :2.9 kg
Set-gewicht zonder standaard :2.7 kg
*De onderdelenspecificaties van deze TV-set hier voorzien, zijn alleen ter referentie.
Verschillen kunnen zich voordoen omdat de technologie van het product wordt bijgewerkt.
Ontwerp en specificaties zijn onderhevig aan verandering zonder kennisgeving.
Beschrijving SCART-uitgang
1.Wanneer de huidige bron ATV/AV/SCART is, dan is het SCART-uitgangssignaal ATV.
2.Wanneer de huidige bron DTV is, dan zal er geen SCART-uitgangssignaal zijn.
3.Een andere bron heeft geen SCART-uitgangssignaal.
2 HDMI-aansluitingen
1 SCART-aansluiting.
PC-ingangsaansluiting.
Component Video-aansluiting
Composiet.
1 USB-poort.
1 Hoofdtelefoonuitgang.
Connectiviteit:
1 COAXIAAL-poort.
Ondersteunde systemen: PAL + SECAM
Opslag aantal kanalen: 1000 (DTV),100 (ATV)
TV( RF): 75 Ω ongebalanceerd
AV-Video-ingang: 75 Ω, 1 V-P, RCA
AV-Audio-ingang: 20 KΩ, 500 mB RMS
YPbPr/HDMI-Video-ingang: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Standby-energieverbruik: <0.30W
Digitaal interactief.
Digitale tekst.
Digitale video broadcasting (DVB) ondertitels beschikbaar.
Automatisch configuratie.
Automatisch scannen naar nieuwe kanalen.
Digitale functies: Huidige en volgende programmagids.
7-daagse elektronische programmagids (EPG).
Top-up TV compatibel.
CI-sleuf.
Audiobeschrijving compatibel.
UHF/VHF-tuner; Slaaptimer;
Ouderlijke classificatie ; Beeld en tekst
2 x AAA batterijen voor de afstandsbediening (meegeleverd)
Afmeting VESA-montage: 100 mm x 100 mm
Extra functies: Pakketafmeting (LxBxH): 650x440x135mm
Set-afmeting (LxBxH) met standaard: 568x386x160 mm
Set-afmeting (LxBxH) zonder standaard: 568x344x42 mm
Pakketgewicht: 4.9 kg
Set-gewicht met standaard :3.74kg
Set-gewicht zonder standaard :3.5kg
*De onderdelenspecificaties van deze TV-set hier voorzien, zijn alleen ter referentie.
Verschillen kunnen zich voordoen omdat de technologie van het product wordt bijgewerkt.
Ontwerp en specificaties zijn onderhevig aan verandering zonder kennisgeving.
Beschrijving SCART-uitgang
1.Wanneer de huidige bron ATV/AV/SCART is, dan is het SCART-uitgangssignaal ATV.
2.Wanneer de huidige bron DTV is, dan zal er geen SCART-uitgangssignaal zijn.
3.Een andere bron heeft geen SCART-uitgangssignaal.
2 HDMI-aansluitingen
1 SCART-aansluiting.
PC-ingangsaansluiting.
Component Video-aansluiting
Composiet.
1 USB-poort.
1 Hoofdtelefoonuitgang.
Connectiviteit:
1 COAXIAAL-poort.
Ondersteunde systemen: PAL + SECAM
Opslag aantal kanalen: 1000 (DTV),100 (ATV)
TV( RF): 75 Ω ongebalanceerd
AV-Video-ingang: 75 Ω, 1 V-P, RCA
AV-Audio-ingang: 20 KΩ, 500 mB RMS
YPbPr/HDMI-Video-ingang: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Standby-energieverbruik: <0.30W
Digitaal interactief.
Digitale tekst.
Digitale video broadcasting (DVB) ondertitels beschikbaar.
Automatisch configuratie.
Automatisch scannen naar nieuwe kanalen.
Digitale functies: Huidige en volgende programmagids.
7-daagse elektronische programmagids (EPG).
Top-up TV compatibel.
CI-sleuf.
Audiobeschrijving compatibel.
UHF/VHF-tuner; Slaaptimer;
Ouderlijke classificatie ; Beeld en tekst
2 x AAA batterijen voor de afstandsbediening (meegeleverd)
Afmeting VESA-montage: 200 mm x 100 mm
Extra functies: Pakketafmeting (LxBxH): 810x480x120mm
Set-afmeting (LxBxH) met standaard: 642x435x170mm
Set-afmeting (LxBxH) zonder standaard: 642x390x44mm
Pakketgewicht: 6.5 kg
Set-gewicht met standaard :5.3 kg
Set-gewicht zonder standaard :5.0 kg
*De onderdelenspecificaties van deze TV-set hier voorzien, zijn alleen ter referentie.
Verschillen kunnen zich voordoen omdat de technologie van het product wordt bijgewerkt.
Ontwerp en specificaties zijn onderhevig aan verandering zonder kennisgeving.
Beschrijving SCART-uitgang
1.Wanneer de huidige bron ATV/AV/SCART is, dan is het SCART-uitgangssignaal ATV.
2.Wanneer de huidige bron DTV is, dan zal er geen SCART-uitgangssignaal zijn.
3.Een andere bron heeft geen SCART-uitgangssignaal.
2 HDMI-aansluitingen
1 SCART-aansluiting.
PC-ingangsaansluiting.
Component Video-aansluiting
Composiet.
1 USB-poort.
1 Hoofdtelefoonuitgang.
Connectiviteit:
1 COAXIAAL-poort.
Ondersteunde systemen: PAL + SECAM
Opslag aantal kanalen: 1000 (DTV),100 (ATV)
TV( RF): 75 Ω ongebalanceerd
AV-Video-ingang: 75 Ω, 1 V-P, RCA
AV-Audio-ingang: 20 KΩ, 500 mB RMS
YPbPr/HDMI-Video-ingang: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Standby-energieverbruik: <0.30W
Digitaal interactief.
Digitale tekst.
Digitale video broadcasting (DVB) ondertitels beschikbaar.
Automatisch configuratie.
Automatisch scannen naar nieuwe kanalen.
Digitale functies: Huidige en volgende programmagids.
7-daagse elektronische programmagids (EPG).
Top-up TV compatibel.
CI-sleuf.
Audiobeschrijving compatibel.
UHF/VHF-tuner; Slaaptimer;
Ouderlijke classificatie ; Beeld en tekst
2 x AAA batterijen voor de afstandsbediening (meegeleverd)
Afmeting VESA-montage: 200 mm x 100 mm
Extra functies: Pakketafmeting (LxBxH): 880x550x137mm
Set-afmeting (LxBxH) met standaard: 738.5x487.5x170mm
Set-afmeting (LxBxH) zonder standaard: 738.5x443x64mm
Pakketgewicht: 6.8 kg
Set-gewicht met standaard :5.0 kg
Set-gewicht zonder standaard :4.7 kg
*De onderdelenspecificaties van deze TV-set hier voorzien, zijn alleen ter referentie.
Verschillen kunnen zich voordoen omdat de technologie van het product wordt bijgewerkt.
Ontwerp en specificaties zijn onderhevig aan verandering zonder kennisgeving.
Beschrijving SCART-uitgang
1.Wanneer de huidige bron ATV/AV/SCART is, dan is het SCART-uitgangssignaal ATV.
2.Wanneer de huidige bron DTV is, dan zal er geen SCART-uitgangssignaal zijn.
3.Een andere bron heeft geen SCART-uitgangssignaal.
LE22M600CF
LE24M600CF
LE28M500C
LE28M600C
LE32M600C
Lea este manual con atención antes de operar la unidad, y consérvelo para
referencia futura.
Contenido
Contenido
01 Seguridad y advertencias MENÚ DE IMAGEN 21
Bienvenidos 2 MENÚ DE AUDIO 21
Información importante 2 MENÚ DE RELOJ 22
Aviso de seguridad 3 MENÚ DE AJUSTE 22
Advertencias y precauciones 4 MENÚ DE BLOQUEO 22
MENÚ EPG (Guía electrónica de programación) 23
02 Introducción Sistema de archivos PVR 23
Características principales 5 Prepare para grabar el programa 24
Instrucciones sobre el montaje del soporte base 7 Grabar canal 24
Pautas de instalación para el montaje en pared 8 Reproducir Grabación 24
Panel frontal 10 Pausa en directo 25
Conexiones posteriores AV 11 Reproductor USB 26
Conexión de su TV 12
Interfaz común 15 05 Solución de problemas
Solución de problemas 28
03 Mando a distancia
Mando a distancia 16
06 Especificaciones
Inserte las baterías en el mando a distancia 16 Especificaciones 31
TELETEXTO 17
04 Funcionamiento
Guía de instalación 18
MENÚ CANALES 18
Sintonía automática ( TDT ) 18
Sintonía automática (Cable ) 19
Sintonización manual de DTV ( TDT ) 20
Sintonización manual de DTV (Cable ) 20
Sintonización manual Analógica 20
Editar un programa 20
Interfaz común 21
Información de la señal 21
Actualización de Software (USB) 21
01 SEGURIDAD Y PRECAUCIONES
BIENVENIDO
Gracias por comprar este TV LED LCD de 22"/24"/28"/32". Esta guía le ayudará a instalar y a
comenzar a usar su TV.
En principio, verifique los contenidos de su caja con la siguiente lista . ES
TV LED LCD Digital de 22” Full HD 1080P TV LED LCD Digital de 24” Full HD 1080P
Mando a distancia Mando a distancia
2 baterías AAA 2 baterías AAA
Manual de instrucciones Manual de instrucciones
Guía rápida de inicio Guía rápida de inicio
Tarjeta de garantía Tarjeta de garantía
Tornillos Tornillos
1 base 1 base
INFORMACIÓN IMPORTANTE
LEA TODAS LAS INSTRUCCIONES ANTES DE USAR SU TELEVISOR Y GUÁRDELAS PARA CONSULTAS FUTURAS.
PRECAUCIÓN
RIESGO DE DESCARGA ELÉCTRICA
NO ABRIR
PRECAUCIÓN
PARA REDUCIR EL RIESGO DE DESCARGA ELÉCTRICA. NO RETIRE LA CUBIERTA (O LA PARTE POSTERIOR).
NO CONTIENE PIEZAS INTERNAS QUE EL USUARIO PUEDA REPARAR. ANTE CUALQUIER PROBLEMA,
SOLICITE SERVICIO TÉCNICO A LA LÍNEA DE ASISTENCIA AL CLIENTE. EL SÍMBOLO DEL RAYO EN EL
INTERIOR DE UN TRIÁNGULO, INDICA ALTA TENSIÓN EN SU INTERIOR. ES PELIGROSO TENER CUALQUIER
TIPO DE CONTACTO CON LAS PIEZAS INTERNAS DE ESTE PRODUCTO.
UN SIMBOLO DE EXCLAMACIÓN EN EL INTERIOR DE UN TRIÁNGULO: ESTE SÍMBOLO LE AVISA QUE SE HA
INCLUIDO LITERATURA RELACIONADA CON EL FUNCIONAMIENTO Y CON EL MANTENIMIENTO CON
ESTE PRODUCTO.
PRECAUCIÓN: PARA REDUCIR EL RIESGO DE DESCARGA ELÉCTRICA E INCENDIO, NO
COLOQUE EL TV CERCA DE LAS FUENTES DE HUMEDAD. NO UTILIZAR LIMPIADORES
ABRASIVOS QUE PUEDAN RAYAR O DAÑAR LA PANTALLA LCD. EVITE EL CONTACTO CON
OBJETOS QUE PUEDAN RAYAR LA PANTALLA LCD.
NOTA: ESTÁ PROHIBIDO REPARAR LA UNIDAD USTED MISMO, Y HACERLO PUEDE DAR COMO
RESULTADO LESIONES O DAÑOS AL PRODUCTO. SOLICITE SERVICIO TÉCNICO A LA LÍNEA DE
ASISTENCIA AL CLIENTE.
AVISO DE SEGURIDAD
ADVERTENCIAS Y CUIDADOS
Cuidado ES
Evite que el cable de alimentación quede
atrapado bajo el televisor.
Advertencia
Para el funcionamiento de este televisor se
utiliza alto voltaje. No retire la cubierta
posterior de su aparato. Para servicio técnico,
consulte al personal cualificado.
Cuidado
Nunca se suba, ni se apoye, ni empuje
bruscamente el televisor o su soporte. Debe
prestar especial atención a los niños. Si cayera,
podría causar serias lesiones.
Advertencia
Para evitar peligro de incendio o descarga
eléctrica, no exponga el televisor a la lluvia
ni a la humedad.
Cuidado
No coloque su televisor sobre un carrito, soporte,
estantería, o mesa, inestables. Si cayera podría
causar serias lesiones personales y daños al
televisor.
Advertencia
No deje caer ni introduzca objetos en las
aberturas ni ranuras de la cubierta del
televisor. Nunca derrame ningún tipo de Cuidado
líquido sobre el televisor. Cuando el televisor no se vaya a usar durante un largo
período de tiempo, es recomendable desconectar el
cable de alimentación de la toma de corriente.
Distancias mínimas
Dim:515*320mm(不包括底座)
Cuidado
Cuidado Si el televisor se va a incorporar a un
No obstruya los orificios de ventilación de la compartimento o un lugar cerrado, se deben
cubierta posterior. Una ventilación adecuada mantener unas distancias mínimas. La
es esencial para evitar el fallo de los acumulación de calor puede reducir la vida útil de
componentes eléctricos. su televisor y también puede ser peligroso.
02 INTRODUCCIÓN
PRECAUCIÓN INSTALACIÓN
Nunca manipule ningún componente interno del TV *Coloque el TV en la estancia donde la luz no
ni cualquier otro control de ajuste que no se incida directamente sobre la pantalla.
mencione en este manual. Todos los TV LED son *La oscuridad total o los reflejos en la imagen
equipos eléctricos de alta tensión. en pantalla pueden causar fatiga ocular. Se
Cuando limpie el polvo o cualquier gota de agua en recomienda una iluminación tenue e
la PANTALLA o carcasa, o alrededor de los botones o indirecta para un visionado cómodo.
conectores, debe desconectar el cable de *Deje suficiente espacio entre el TV y la pared
alimentación del conector de alimentación. para permitir la ventilación.
Limpie el TV con un paño suave y seco, libre de polvo. *Evite los lugares excesivamente calurosos
Durante las tormentas eléctricas, desconecte el cable para evitar posibles daños en la cubierta o
de alimentación y el cable de la antena para evitar fallo prematuro de los componentes.
daños al TV y a otros dispositivos que estén *No obstruya los orificios de ventilación
conectados al mismo. durante el uso del TV.
Todas las reparaciones al TV deben efectuarse por
personal de servicio cualificado en estas tareas.
Características principales
1 Se puede utilizar como Televisor, dispositivo 4 Conexión HDMI y Euroconector;
de visualización, pantalla de PC;
5 Sonido Estéreo NICAM;
2 Alta luminosidad, amplio Ángulo de visión
PC
MODOS SOPORTADOS
ES
RESOLUCIÓN Frecuencia V.(Hz) Frecuencia H.(KHz)
1 640x480 60 31.47
2 800x600 60 37.88
3 1024x768 60 48.36
4 1366x768 60 47.7
5 1280x1024 60 63.98
1920x1080
6 (sólo para 22” y 24”) 60 66.64
(22",24")
(28")
(32")
NOTAS DE INSTALACIÓN
Ubique el TV en una habitación en donde la luz no le refleje directamente sobre la pantalla. La
oscuridad total o un reflejo en la pantalla pueden provocar cansancio en la vista. Se
recomienda iluminación suave e indirecta para una visión cómoda.
Deje espacio suficiente entre el TV y la pared a fin de permitir ventilación.
Atención: El pie de esta TV no es posible rotarlo.
Evite ubicaciones excesivamente calurosas para prevenir un posible daño a la carcasa o un
fallo prematuro de los componentes.
1. Coloque el Televisor LED LCD sobre una superficie sólida. Por favor, coloque algún material suave
sobre el frente de la pantalla para protegerla de cualquier daño.
ES
(22",24")
(28")
(32")
2. Utilice los cuatro tornillos suministrados para fijar el TV sobre el soporte de pared del TV
(no incluido), por medio de los cuatro orificios estándar VESA de la parte posterior del televisor.
100mm
M4X5 M4X5
100mm
M4X5 M4X5
(22",24")
200mm
M4X5 M4X5
100mm
M4X5 M4X5
(28")
200mm
M4X5 M4X5
100mm
M4X5 M4X5
(32")
3
SOURCE 1
MENU 2
2 1 CH+
3
CH- ES
VOL+
4
VOL-
30 30
≤8m
STANDBY 5
SOURCE 1
MENU 2
2 1 CH+
3
CH-
VOL+
4
VOL-
30 30
≤8m STANDBY 5
Conexiones posteriores/laterales(22",24",28")
4
1 2 3 5
COMMON INTERFACE (CI)
USB HDMI2(ARC) HDMI1
6 7 8 9 10 11 12 13
Conexiones posteriores/laterales(32")
AC-INPUT
100-240V~ 50/60Hz DIGITAL AUDIO OUTPUT
YPbPr VIDEO L R (COAXIAL) SCART
1 2 3 4 5 6
7 8 9 10 11 12 13 14
Amplificador
ES
G B R
Y W R
Video, reproductor DVD u
otro aparato con CVBS/S-Video
Equipos de Audio/Video
con conectores HDMI
G Verde (Y)
B Azul (Pb/Cb)
W Blanco (AUDIO-L )
R Rojo (AUDIO-R, Pr/Cr)
Y Amarillo (VIDEO)
G Verde (Y)
B Azul (Pb/Cb)
W Blanco (AUDIO-L )
R Rojo (AUDIO-R, Pr/Cr)
Y Amarillo (VIDEO)
Amplificador
Y W R
AC-INPUT
100-240V~ 50/60Hz DIGITAL AUDIO OUTPUT
YPbPr VIDEO L R (COAXIAL) SCART
G B R
Equipos de Audio/Video
con conectores HDMI
INTERFAZ COMÚN
La ranura de la interfaz común (IC) está diseñada para
admitir el módulo de acceso condicional (AC) y la tarjeta
Inteligente a fin de ver los programas de televisión de Se muestra la información detallada en la
pago y los servicios adicionales. Comuníquese con su tarjeta IC en uso.
proveedor de servicio de Interfaz Común para obtener Pulse el botón OK para acceder al menú de la
más información acerca de los módulos y de la tarjeta. Consulte el manual de instrucciones del
suscripción. Tenga en cuenta que no se proporcionan los módulo para configurar los detalles.
módulos AC ni las tarjetas inteligentes, ni los ofrecemos
como accesorios opcionales. Cuando se retira el módulo, el siguiente
mensaje aparecerá en la pantalla.
CAM Retirada
Advertencia
Desconecte el TV antes de insertar los módulos en
la ranura de la Interfaz Común.
RANURA DE IC
CAM
Tarjeta Inteligente
CAM Insertada
Ajustes
Bloquear
03 Mando a distancia
SCREEN Pulsar para cambiar la relación de aspecto de la imagen.
16 Púlsar para abrir el menú en-pantalla. En modo
Teletexto, pulsar para abrir la página ÍNDICE.
17 Pulsar para navegar en el menú en-pantalla.
OK Pulsar para confirmar una selección.
ES
En modo Teletexto, pulsar para entrar en modo mezcla.
TELETEXTO
El Teletexto es un sistema de información emitido por algunos canales que puede ser consultado como
un periódico. También ofrece acceso a los subtítulos para los telespectadores con problemas de
audición o que no estén familiarizados con el idioma de transmisión (redes por cable, canales por
satélite, etc.)
E
Pulse: Función
Se usa para entrar o salir de los modos de teletexto. Aparece el sumario con
TEXTO una lista de elementos a los que puede accederse. Cada elemento tiene un
número de página correspondiente de 3 dígitos.
TECLAS DE ACCESO Están coloreados como se muestra en la parte inferior de la pantalla. Las
DIRECTO cuatro teclas de colores se utilizan para acceder a los elementos o
páginas correspondientes. Las áreas coloreadas parpadean cuando el
elemento o la página no están aún disponibles.
04 FUNCIONAMIENTO
Guía de Instalación Instalación inicial
Cable Rápido
Idioma del menú Español
Búsqueda automática DTV+ATV
Ajustes Modo doméstico
Iniciar
País España
OK Cancelar CI
Audio Información de señal
Actualizar Software (USB)
Elija “Cancel” para regresar al menú de configuración Reloj
inicial, y el cursor permanecerá en la opción modo “
home”. Elíjala para ir al menú de selección del país. Ajustes
3). Use los botones ◄► para seleccionar Tipo de antena 1.2 )Sintonía Automática (DVB-C)
en aerea para TDT.
1).Pulse el botón MENU, luego pulse los botones ▼▲ para
Canales Tipo de antena Air seleccionar el menú Canales y después pulse el botón OK.
País España
2).Use los botones ▼▲ para seleccionar Búsqueda
Imagen Modo DTV+ATV
Iniciar automática y luego pulse el botón OK , en la opción Tipo
Audio
de antenae seleccione Cable para DVB-C.
Reloj
Canales Tipo de antena Cable
Ajustes País España
Imagen Modo DTV+ATV
Iniciar
Bloquear Audio
Señal digital detectada 7).Si desea saltar el paso de sintonía DTV, pulse el botón
Imagen
DTV: 3 MENU para interrumpir la sintonización por la mitad. Pasará
Audio
Radio: 0 directamente a la sintonización ATV. Puede repetir el paso
Datos: 0 anterior si también desea saltar la sintonización ATV. Le
Canales analogicos encontrados: 0
Reloj aparecerá un recordatorio de instalación la próxima vez
que encienda el TV, si no encuentra ningún canal.
Ajustes
8).Después que esté completa la sintonización, los canales
Bloquear se ordenarán en un orden preestablecido. Si desea saltar
canales, modifique el orden preestablecido o cambie el
MENU Saltar EXIT Salir
nombre de los canales, seleccione Editar canales en el
menú Canales.
Nota Canales
Frecuencia 474000K
Tasa de símbolos 6875K
Todos los canales, incluyendo ATV, DTV y Radio, pueden
Imagen Modulación Auto
sintonizarse a la vez, si el Tipo de Sintonización es DTV+ATV.
Iniciar
Todos los canales almacenados desaparecerán después Audio
4. Menú RELOJ
El cuarto elemento del menú es el menú del RELOJ. Aquí Ajustes
j de PVR
puede ajustar la hora del reloj, establecer la hora de Mover izquierda
salir del menú EPG, pulse los botones EPG o EXIT. Puede pulsar el botón Rojo para ver la lista de programas
Púlselo otra vez (servicio) para volver atrás. programados. También puede eliminar los programas que
Nota ha programado.
Por favor, use las indicaciones de la parte inferior de la INFO (botón Verde)
pantalla de la EPG para las funciones básicas de las teclas Desde el menú EPG, pulse el botón Verde para ver más
Bajar
1.El tamaño del almacenamiento USB puede estar
OK
EXIT Seleccionar
entre 128MB y 500GB, pero para el uso práctico se
MENU Atrás
EXIT Salir
recomienda utilizar de 2GB a 500GB.
2.Cuando la tasa de bits es muy baja, la imagen
Grabaciones programadas: Aquí puede establecer la puede pixelarse. Esto puede ser debido al uso de
Lista de grabaciones programadas. Y también puede cables de conexión USB en vez de conectar el
eliminar las grabaciones programadas que haya
dispositivo USB directamente al TV.
establecido.
Ajusts de lista de grabaciones
3.No todos los dispositivos USB son compatibles.
Grabación programada
Graba
Standby
Nota
Cerciórese de que el dispositivo usado para grabar está Reproducir un archivo grabado
conectado al puerto USB de la parte trasera de la unidad y Su TV Haier graba el programa en su dispositivo de
es compatible para grabación. Si su dispositivo de memoria USB en formato *.ts “Time Shift”. Si otro
almacenamiento no es compatible, el sistema le preguntará dispositivo, TV, PC, Laptop, DVD, o periférico no soporta
si desea formatearlo. Entre en menú PVR File System > Device o reconoce la extensión *.ts (Time Shift), entonces no lo
List para formatear su dispositivo. reproducirá. “ts” es el formato usado en la transmisión
de TV de alta definición. Puede reproducir archivos “ts”
La función de grabación no está disponible cuando el en un PC de sobremesa o portátil usando el software
canal es un canal de la tarjeta CI+. correcto. Busque en Internet o pregunte en su tienda de
Informática sobre el software más apropiado.
Precaución: Haier no asume ninguna responsabilidad
sobre cualquier software descargado por el usuario o
9.Pausa en directo distribuidor que pueda contener virus, ni de cualquier
Pulse el botón ▶II para hacer una pausa en el programa que avería resultante al instalar el software. El cliente lo usa
esté viendo para activar la función de Pausa en directo. asumiendo este riesgo.
Le aparecerá el siguiente menú. Este menú desaparecerá
automáticamente transcurridos unos segundos.
00:00:00
00:00:05
Tiempo disponible
PLAY Pausa Stop FB FF 00:00:00/04:13:20
10.Reproductor USB
Pulse la tecla FUENTE , seleccione USB en la lista de fuentes y pulse el botón OK para entrar en el menú USB.
Por favor, cerciórese de que el dispositivo está conectado en el puerto USB. Hay cuatro opciones de tipo multimedia que
pueden seleccionarse, tales como imagen, música, película y texto. Seleccione el tipo de archivo multimedia usando ◄►
y pulse el botón OK para entrar en el menú de selección del disco.
Haier Innovation Life
Use los botones ▼ / ▲ para seleccionar el disco y carpeta correctos y pulse OK para entrar en la lista de archivos
multimedia. Pulse el botón Rojo para regresar al menú de selección del tipo de archivo multimedia.
Seleccione el archivo multimedia pulsando ◄► o▼▲, entonces la aparecerá una ventana con la vista previa. Pulse el
botón ► para reproducir el archivo multimedia en pantalla completa. Cuando está reproduciendo un archivo de película,
pulse el botón ▼ para ver la barra de control.
FOTO
USB1/Pic
Seleccionar
OK Aceptar Exit Salir Menú rápido Media Pad
FOTO
Funciones Básicas
Cuando esté viendo fotos, pulse la tecla "▼" en el mando a distancia para mostrar la barra de ayuda en la
parte inferior de la pantalla.
Reproducir/
Pulse la tecla “Reproducir/Pausa” en el mando a distancia para reproducir o hacer una pausa.
Pausa
Anterior Pulse la tecla “Izquierda" en el mando a distancia para ver la foto anterior.
Siguiente Pulse la tecla “Derecha" en el mando a distancia para ver la foto siguiente.
Use las teclas “Izquierda/Derecha” para seleccionar esta función y pulse la tecla OK para
Parar
parar la reproducción y regresar al menú previo.
Pulse la tecla Azul y podrá entrar en el menú rápido para ajustar el Intervalo entre fotos,
Menú rápido
Repetir, Efectos de transición y Música de fondo (primero debe de reproducir la música).
MÚSICA
USB1/Music
.. 1/1 Título:
Álbum:
10547672.mp3 Artista:
Pista
14953359.mp3 Año: 2010-09-30
1/2
10547672
PLAY
00:00:53 00:00:00
Seleccionar
OK Aceptar Exit Salir Menú rápido Media Pad
MÚSICA
Cuando esté escuchando música, pulse la tecla "►" para seleccionar la barra de herramientas.
Funciones Básicas
Retroceso Rápido: Use las teclas “Izquierda/Derecha” en el mando a distancia para seleccionar esta
función y pulse OK para retroceder rápido. Pulse la tecla “REPRODUCIR” para reanudar la reproducción.
Avance Rápido: Use las teclas “Izquierda/Derecha” en el mando a distancia para seleccionar esta
función y pulse OK para avanzar rápido. Pulse la tecla “REPRODUCIR” para reanudar la reproducción.
Música de fondo: Use las teclas “Izquierda/Derecha” en el mando a distancia para seleccionar esta
función y pulse OK para activar/desactivar.
El resto de funciones son similares a las de "PHOTO". Por favor, vea las opciones de “PHOTO”.
PELÍCULAS
Las funciones son similares a las de "PHOTO". Por favor, vea las opciones de “PHOTO”.
Funciones Básicas
Establecer punto A: Use las teclas “Izquierda/Derecha” en el mando a distancia para seleccionar esta
función y pulse OK para establecer los puntos A y B. La película se reproducirá cíclicamente desde A
hasta B.
Ampliar: Use las teclas “Izquierda/Derecha” en el mando a distancia para seleccionar esta función y
pulse OK para ampliar la imagen. (si el documento es mayor de 1920x1080, esta función no está
soportada)
Reducir: Use las teclas “Izquierda/Derecha” en el mando a distancia para seleccionar esta función y
pulse OK para reducir la imagen. (Esta función no soporta vídeo HD mayor de 1920x1080.)
Seleccionar tiempo: Use las teclas “Izquierda/Derecha” en el mando a distancia para seleccionar esta
función y pulse OK para seleccionar el tiempo de reproducción.
TEXTO
Pulse "▼/▲" para seleccionar la página anterior / siguiente. Use las teclas numéricas y OK para saltar
directamente a la página que desee.
Se proporciona la lista de los tipos de archivos más importantes que se reproducen desde un dispositivo USB.
05 SOLUCIÓN DE PROBLEMAS
Volumen(comprobar si está
activado el Silencio o si las
Imagen normal Silencio
conexiones de audio son
incorrectas)
Resolución de problemas
La mayoría de PCs y de ordenadores portátiles requieren que
Mi TV no muestra la imagen en mi pulse algunos botones en su teclado para obtener una imagen
ordenador portátil/PC cuando se en el TV o en otra pantalla externa, al conectarlos con un
conecta. enchufe VGA (el enchufe azul de 15 pines en su PC o en su
ordenador portátil). En general, esto es F7 (Dell) o F4
(HP/Samsung) o F5 (Toshiba). En ordenadores portátiles, tiene
que pulsar la tecla “Fn” al mismo tiempo que la tecla “F”.
Canales faltantes
Puede ocurrir que compruebe que hay canales faltantes o que está recibiendo canales de la región incorrecta.
Algunas veces, los servicios interactivos (botón rojo) no funcionan. En general, esto es causado por una señal débil; ver
Antenas de TV.
Antenas de TV
La televisión terrestre digital (Freeview) viene a su TV por medio de una antena; puede ocurrir que la antena anterior
que era buena para televisión analógica no funcione bien para la digital por lo que se puede necesitar una
actualización. Si obtiene algunos, pero no todos los canales digitales en DTV (Freeview), por ejemplo, BBC1, BBC2,
canal 4, pero no ITV o canal 5, en general, esto se debe a que su antena es de banda estrecha y necesita cambiarse a
banda ancha.
Bordes blancos
Los bordes blancos alrededor de los objetos y de la gente, en general, aparecen tanto si la definición del TV está
configurada en un nivel muy alto o si su televisor utiliza tecnología de procesamiento de mejora de bordes. Vaya al
menú Picture y ajuste la definición hasta que el borde blanco desaparezca. Si la mejora de bordes está activada,
intente desactivarla utilizando el menú Service.
Vídeo entrecortado
A veces, el vídeo puede verse entrecortado. Cuando esto ocurra, verifique si la señal es lo suficientemente fuerte. Si la
señal es fuerte, el problema es con el operador de cable. Si la fuerza de la señal es débil, intente aumentarla con la
ayuda de un amplificador.
Conexión USB
La conexión USB funcionará con archivos *.jpg (foto) y *.mp3 (música). Tenga en cuenta que el TV no reconoce ningún
iPhone o iPod de Apple conectados al conector USB en el TV. El TV puede reproducir archivos, pero debido a los
múltiples y diferentes formatos de archivo, no se garantiza que estos otros formatos de archivo funcionen.
06 Especificaciones
TV LED LCD Digital de 22” Full HD 1080P
FULL HD
Calidad de imagen Digital integrado.
de la televisión: Tamaño de pantalla:55cm
Resolución 1920x1080 píxeles 50Hz.
DVB-T, DVB-C
Descodificador Modulación 16/32/64/128/256 QAM/ Modulación QPSK
Sintonizador DTV MPEG2, MPEG4, H.264
2 conectores HDMI.
1 Euroconector (SCART )
Conector de entrada de PC.
Conector de vídeo por componentes.
Vídeo compuesto.
1 puerto USB.
1 salida de auriculares.
Conectividad:
1 puerto COAXIAL.
Sistemas soportados: PAL+ SECAM
Número de canales en memoria: 1000 (DTV),100 (ATV)
TV( RF): 75Ω desbalanceada
Entrada de vídeo AV: 75Ω, 1V-P, RCA
Entrada de Audio AV: 20KΩ, 500mB RMS
Entrada de vídeo YPbPr/HDMI: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
*Las especificaciones sobre las piezas de este TV que se proporcionan en el presente son solamente a
modo de referencia. Puede haber diferencias cuando se actualice la tecnología del producto.
El diseño y las especificaciones están sujetos a modificaciones sin aviso.
Descripción de la salida SCART:
1. Cuando la fuente actual es ATV/AV/SCART, la señal de salida SCART es ATV.
2. Cuando la fuente actual es DTV, no habrá señal de salida SCART.
3. Las otras fuentes no tienen señal de salida SCART.
2 conectores HDMI.
1 Euroconector (SCART )
Conector de entrada de PC.
Conector de vídeo por componentes.
Vídeo compuesto.
1 puerto USB.
1 salida de auriculares.
Conectividad:
1 puerto COAXIAL.
Sistemas soportados: PAL+ SECAM
Número de canales en memoria: 1000 (DTV),100 (ATV)
TV( RF): 75Ω desbalanceada
Entrada de vídeo AV: 75Ω, 1V-P, RCA
Entrada de Audio AV: 20KΩ, 500mB RMS
Entrada de vídeo YPbPr/HDMI: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
*Las especificaciones sobre las piezas de este TV que se proporcionan en el presente son solamente a
modo de referencia. Puede haber diferencias cuando se actualice la tecnología del producto.
El diseño y las especificaciones están sujetos a modificaciones sin aviso.
Descripción de la salida SCART:
1. Cuando la fuente actual es ATV/AV/SCART, la señal de salida SCART es ATV.
2. Cuando la fuente actual es DTV, no habrá señal de salida SCART.
3. Las otras fuentes no tienen señal de salida SCART.
2 conectores HDMI.
1 Euroconector (SCART )
Conector de entrada de PC.
Conector de vídeo por componentes.
Vídeo compuesto.
1 puerto USB.
1 salida de auriculares.
Conectividad:
1 puerto COAXIAL.
Sistemas soportados: PAL+ SECAM
Número de canales en memoria: 1000 (DTV),100 (ATV)
TV( RF): 75Ω desbalanceada
Entrada de vídeo AV: 75Ω, 1V-P, RCA
Entrada de Audio AV: 20KΩ, 500mB RMS
Entrada de vídeo YPbPr/HDMI: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
*Las especificaciones sobre las piezas de este TV que se proporcionan en el presente son solamente a
modo de referencia. Puede haber diferencias cuando se actualice la tecnología del producto.
El diseño y las especificaciones están sujetos a modificaciones sin aviso.
Descripción de la salida SCART:
1. Cuando la fuente actual es ATV/AV/SCART, la señal de salida SCART es ATV.
2. Cuando la fuente actual es DTV, no habrá señal de salida SCART.
3. Las otras fuentes no tienen señal de salida SCART.
2 conectores HDMI.
1 Euroconector (SCART )
Conector de entrada de PC.
Conector de vídeo por componentes.
Vídeo compuesto.
1 puerto USB.
1 salida de auriculares.
Conectividad:
1 puerto COAXIAL.
Sistemas soportados: PAL+ SECAM
Número de canales en memoria: 1000 (DTV),100 (ATV)
TV( RF): 75Ω desbalanceada
Entrada de vídeo AV: 75Ω, 1V-P, RCA
Entrada de Audio AV: 20KΩ, 500mB RMS
Entrada de vídeo YPbPr/HDMI: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
*Las especificaciones sobre las piezas de este TV que se proporcionan en el presente son solamente a
modo de referencia. Puede haber diferencias cuando se actualice la tecnología del producto.
El diseño y las especificaciones están sujetos a modificaciones sin aviso.
Descripción de la salida SCART:
1. Cuando la fuente actual es ATV/AV/SCART, la señal de salida SCART es ATV.
2. Cuando la fuente actual es DTV, no habrá señal de salida SCART.
3. Las otras fuentes no tienen señal de salida SCART.
LE22M600CF
LE24M600CF
LE28M500C
LE28M600C
LE32M600C
Contenuti
01 Sicurezza ed avvisi MENU IMMAGINI 21
Benvenuti 2 MENU AUDIO 21
Informazioni Importanti 2 MENU ORARIO 22
Avvisi di sicurezza 3 MENU SETUP 22
Avvisi e cautela 4 MENU BLOCCO 22
EPG (Guida Elettronica alla programmazione) 23
02 Introduzione File System PVR 23
Parametri principali 5 Preparatevi a registrare il programma 24
Istruzioni di assemblaggio della base di sostegno 7 Registrare il programma 24
Linee guida per l'installazione a muro 8 Riprodurre la registrazione 24
Pannello anteriore 10 Time Shift 25
Collegamenti AV supportati 11 Lettore USB 26
Collegare il vostro televisore 12
Common interface 15 05 Risoluzione dei problemi
Risoluzione dei problemi 28
03 Telecomando
Telecomando 16 06 Specifiche
Installate le batterie nel telecomando 16 Specifiche 31
TELETEXT (televideo) 17
04 FUNZIONAMENTO
Guida all'installazione 18
MENU CANALI 18
Sintonizzazione automatica (DVB-T ) 18
Sintonizzazione automatica (DVB-C) 19
Sintonizzazione manuale DTV (DVB-T ) 20
Sintonizzazione manuale DTV (DVB-C) 20
Sintonizzazione manuale ATV 20
Modifica programma 20
Common Interface 21
Informazioni segnale 21
Aggiornamento SW (USB) 21
01 SICUREZZA ED AVVISI
BENVENUTI
Grazie per aver acquistato questo televisore LED LCD 22”/24"/28"/32". Questa guida vi aiuterà ad impostare
e ad iniziare ad utilizzare il vostro televisore.
Per prima cosa, controllate il contenuto della confezione con la lista di controllo delle parti sottostante.
TV LED LCD 22" Full HD 1080P Digital TV LED LCD 24" Full HD 1080P Digital
Telecomando Telecomando IT
2 x batterie AAA 2 x batterie AAA
Manuale di istruzioni Manuale di istruzioni
Guida rapida all'avvio Guida rapida all'avvio
Scheda di Garanzia Scheda di Garanzia
Viti Viti
Piedistallo Piedistallo
TV LED LCD 28" HD Digital TV LED LCD 32" HD Digital
Telecomando Telecomando
2 x batterie AAA 2 x batterie AAA
Manuale di istruzioni Manuale di istruzioni
Guida rapida all'avvio Guida rapida all'avvio
Scheda di Garanzia Connetti cavo YPbPr
Viti Scheda di Garanzia
Piedistallo Viti
Piedistallo
Adesso potete iniziare!
INFORMAZIONI IMPORTANTI
LEGGETE TUTTE LE ISTRUZIONI PRIMA DELL'USO E CONSERVATELO PER FUTURE CONSULTAZIONI.
CAUTELA
RISCHIO DI SHOCK ELETTRICO
NON APRIRE
CAUTELA
PER RIDURRE IL RISCHIO DI SHOCK ELETTRICI, NON RIMUOVETE IL COPERCHIO (O IL RETRO).
ALL'INTERNO NON VI SONO PARTI A CUI L'UTENTE POSSA FARE MANUTENZIONE DA SOLO. PER
QUALUNQUE PROBLEMA, FATE RIFERIMENTO PER LA MANUTENZIONE CALL CENTER. E' PRESENTE IL
SIMBOLO DI UNA FRECCIA A FORMA DI FULMINE IN UN TRIANGOLO. QUESTO SIMBOLO INDICA LA
PRESENZA ALL'INTERNO DI ALTO VOLTAGGIO. E' PERICOLOSO AVERE QUALUNQUE TIPO DI CONTATTO
CON QUALUNQUE PARTE INTERNA DI QUESTO PRODOTTO
E' PRESENTE UN PUNTO ESCLAMATIVO IN UN TRIANGOLO: QUESTO SIMBOLO VI AVVISA CHE NEL
PRODOTTO SONO INCLUSE ISTRUZIONI IMPORTANTI PER L'USO E LA MANUTENZIONE.
CAUTELA: PER RIDURRE IL RISCHIO DI INCENDI O SHOCK ELETTRICO, NON PONETE IL
TELEVISORE VICINO A SORGENTI DI UMIDITA'. NON UTILIZZATE DETERSIVI ABRASIVI CHE
POSSANO GRAFFIARE O ROVINARE LO SCHERMO LCD. EVITATE IL CONTATTO CON OGGETTI
CHE POSSANO GRAFFIARE LO SCHERMO LCD.
NOTIFICHE DI SICUREZZA
AVVISI E CAUTELA
Cautela: IT
Non bloccate il cavo di alimentazione sotto il
Avviso: televisore.
Sono utilizzati alti voltaggi nell'operatività del
televisore. Non rimuovete il retro del cabinet
dal teleuisore. Per la manutenzione fate
riferimento solo a personale di servizio
qualificato.
Cautela:
Non state vicino, non appoggiatevi, né spingete
all'improvviso il televisore o il suo supporto. Fate
particolarmente attenzione ai bambini. Se
Avviso: dovesse cadere potrebbe causare serie ferite.
Per prevenire il rischio di shock elettrico, non
esponete il televisore a pioggia o umidità.
Cautela:
Non posizionate l'unità su un carrello, sostegno,
scaffale o tavolo instabile. Se dovesse cadere
potrebbe causare serie ferite alle persone e danni
al televisore stesso.
Avviso:
Non lasciate cadere o spingete oggetti negli
slot e aperture del televisore. Non lasciate
cadere alcun tipo di liquidi su di esso.
Cautela:
Quando il televisore non viene utilizzato per un lungo
periodo di tempo, è consigliabile scollegare il cavo di
alimentazione dalla presa AC.
Distanze minime
Dim:515*320mm(不包括底座)
Cautela: Cautela:
Non bloccate i fori di ventilazione sul retro. Se il televisore dev'essere integrato in un mobile o
Un'adeguata ventilazione è essenziale per in uno spazio chiuso, devono essere mantenute le
prevenire guasti ai componenti elettrici. distanze minime. Tra l'apparecchio e
l'alloggiamento.Il calore nel mobile potrebbe
ridurre la vita del vostro televisore e potrebbe
essere pericoloso.
02 INTRODUZIONE
ATTENZIONE INSTALLAZIONE
Non alterare mai alcun componente all'interno della TV o *Posizionate il televisore in una stanza dove la
nessun altro controllo di regolazione non descritto in luce non colpisca direttamente lo schermo.
questo manuale. Tutte le TV LED sono apparecchiature *L'oscurità totale o i riflessi sullo schermo
elettroniche ad alta tensione. possono causare affaticamento oculare. Si
Quando si toglie la polvere o qualsiasi goccia d'acqua raccomanda un'illuminazione indiretta e
dallo SCHERMO o dalla STRUTTURA o intorno a pulsanti soffusa per una visione confortevole.
o connettori, il cavo di alimentazione deve essere *Lasciate abbastanza spazio tra il televisore e
rimosso dalla presa di alimentazione. il muro per permettere la ventilazione.
Pulire la TV con un panno morbido, asciutto e senza *Evitate luoghi eccessivamente caldi per
polvere. prevenire eventuali danni al cabinet o guasto
Durante i temporali, scollegare il cavo di alimentazione e prematuro dei componenti.
l'antenna per prevenire il danneggiamento della TV e di *Non coprite le aperture di ventilazione
qualsiasi altro dispositivo collegato ad essa. quando utilizzate il televisore.
Tutte le riparazioni a questa TV devono essere effettuate
solo da personale qualificato per l'assistenza della TV.
Caratteristiche principali
1 Utilizzabile come televisore, terminale video, 4 NICAM;
monitor PC.
2 Alta luminosità, ampio angolo di visuale. 5 Time shift
3 Interfaccia HDMI e SCART
Parametri principali
Schermo 22 24 28 32
Sistema TV PAL-B/G , I , D/K
SECAM-B/G , D/K , L
DVB-T, DVB-C
Sistema segnale video PAL/SECAM/MPEG2/MPEG4/H.264
Numero di canali Memorizzabili 1000(DTV);100(ATV)
Tensione di ingresso AC 100 -240 V 50/60Hz
Consumo energetico: 38W 40W 41W 50W
Potenza assorbita in standby <0.30W
Potenza in uscita audio (THDS ≤ 7%) 2x3W 2x3W 2x8W 2x8W
Ingresso segnale Analogico RGB (PC) x1; PC audio x1
High-Definition Multimedia Interface (HDMI) x 2
Ingresso composito x 1
YPbPr x 1
Ingresso SCART x 1
CI x 1
USB x 1
RF Co-Ax x 1
Cuffia x 1
Uscita segnale
COASSIALE x 1
Uscita SCART x 1
Definizione orizzontale (linea TV) Ingresso video composito >=350
YPbPr >=400
PC
MODALITÀ SUPPORTATA
IT
RISOLUZIONE V. Freq. (Hz) H. Freq. (KHz)
1 640x480 60 31.47
2 800x600 60 37.88
3 1024x768 60 48.36
4 1366x768 60 47.7
5 1280x1024 60 63.98
1920x1080
6 60 66.64
(Solo per 22", 24")
(22",24")
(28")
(32")
NOTE DI INSTALLAZIONE
Posizionate il televisore in una stanza dove la luce non colpisca direttamente lo schermo.
L'oscurità totale o i riflessi sullo schermo possono causare affaticamento oculare. Si
raccomanda un'illuminazione indiretta e soffusa per una visione confortevole.
Nota: si prega di non ruotare questo TV.
Lasciate abbastanza spazio tra il televisore e il muro per permettere la ventilazione.
Evitate luoghi eccessivamente caldi per prevenire eventuali danni al cabinet o guasto
prematuro dei componenti.
1.Posizionate il televisore LED LCD su una superficie stabile. Posizionate un panno morbido
sulla parte anteriore dello schermo per proteggerlo da qualunque danno.
IT
(22",24")
(28")
(32")
2. Utilizzate le quattro viti fornite per fissare il televisore su un braccio di sostegno a muro
(non incluso) attraverso i quattro fori standard VESA sul retro del televisore.
100mm
M4X5 M4X5
100mm
M4X5 M4X5
(22",24")
200mm
M4X5 M4X5
100mm
M4X5 M4X5
(28")
200mm
M4X5 M4X5
100mm
M4X5 M4X5
(32")
3
SOURCE 1
MENU 2
2 1 CH+
3
IT
CH-
VOL+
4
VOL-
30 30
≤8m
STANDBY 5
SOURCE 1
MENU 2
2 1 CH+
3
CH-
VOL+
4
VOL-
STANDBY 5
30 30
≤8m
1 2 3 5
COMMON INTERFACE (CI)
USB HDMI2(ARC) HDMI1
6 7 8 9 10 11 12 13
1 2 3 4 5 6
7 8 9 10 11 12 13 14
Amplificatore
IT
G B R
Y W R
CVBS, DVD Player o altri
dispositivi con CVBS/S-Video.
Dispositivo Audio/Video
con Interface HDMI
G Verde (Y)
B Blu (Pb/Cb)
W Bianco (AUDIO-L)
R Red (AUDIO-R, Pr/Cr)
Y Giallo (VIDEO)
G Verde (Y)
B Blu (Pb/Cb)
W Bianco (AUDIO-L)
R Red (AUDIO-R, Pr/Cr)
Y Giallo (VIDEO)
Amplificatore
Y W R
AC-INPUT
100-240V~ 50/60Hz DIGITAL AUDIO OUTPUT
YPbPr VIDEO L R (COAXIAL) SCART
G B R
Dispositivo Audio/Video
con Interface HDMI
COMMON INTERFACE
Lo slot Common Interface è progettato per accettare i
moduli di Accesso Condizionale (CA) e le smart card per
vedere i programmi della televisione a pagamenti e Vengolo visualizzate le informazioni
servizi aggiuntivi. Contattate il fornitore del servizio di dettagliate sulla scheda CI:
Common Interface per avere più informazioni sui moduli Premete il tasto OK per accedere al menù della
e sulle sottoscrizioni. Notate che i moduli CA e le smart scheda. Fate riferimento al modulo del manuale di
card non sono né forniti né accessori optional acquistabili istruzioni per i dettagli delle impostazioni.
da noi.
Quando il modulo viene rimosso, il seguente
messaggio apparirà sullo schermo.
Slot CI
CAM
Smart Card
CAM Inserita
Auto scansione
Canale
Scansione manuale
Immagine Modifica canale
Common Interface
Audio Informazione Segnale
Software Update(USB)
Orologio
Impostare
Blocco
03 Telecomando
SCREEN Premere per modificare le proporzioni dell'immagine.
16 Premere per aprire il menù su schermo. In modalità
Televideo, premere per aprire la pagina indice.
17 Premere per spostarsi nel menù su schermo.
OK Premere per confermare una selezione.
IT
In modalità Televideo, premere per entrare in
modalità mix.
TELETEXT (televideo)
Il Televideo è un sistema di informazioni trasmesso da certi canali che può essere consultato come un
quotidiano. Offre anche l'accesso ai sottotitoli per gli spettatori con problemi di udito o che non hanno
familiarità con il linguaggio della trasmissione (reti via cavo, canali via satellite etc.)
E
Premendo: Otterrete:
Si usa per attivare o uscire dalla modalità TELEVIDEO Il sommario appare con
TEXT (televideo): una lista di oggetti accessibili. Ogni oggetto ha un numero di pagina
corrispondente a tre cifre.
SELEZIONARE Inserite il numero della pagina richiesta utilizzando i tasti numerici o Su e Giù.
Esempio: pagina 120, inserite 120. Il numero è visualizzato in alto a sinistra, il
UNA PAGINA
contatore gira e quindi viene visualizzata la pagina. Ripetete l'operazione per
vedere un'altra pagina. Se il contatore continua a cercare, significa che quella
pagina non è trasmessa. Selezionate un altro numero.
ACCESSO DIRETTO I colori sono quelli visualizzati in fondo allo schermo. I quattro tasti
AGLI OGGETTI. colorati sono utilizzati per accedere agli oggetti o alle pagine
corrispondenti. Le aree colorate lampeggiano quando l'oggetto o la
pagina non sono disponibili.
INDICE: Permette di tornare fa tornare alla pagina dei contenuti (di solito pagina 100)
CODICE SECONDARIO Premere il pulsante e immettere il numero di 4 cifre per inserire una
pagina secondaria.
HOLD Per fermare l'immagine.
MIX Questo sovrapporre i dati del televideo sulla parte superiore del televisore.
Premere nuovamente il tasto per tornare al testo completo.
04 FUNZIONAMENTO
Guida all'installazione Prima Impostazione
paese.
Blocco
2). Premere i tasti ◄► per selezionare AIR/Cavo
significa DVB-T/DVB-C. MENU Ritorno Sposta OK OK
3). Premere i tasti ◄► per selezionare tipo antenna su 1.2 )Sintonizzazione automatica (DVB-C)
Air significa DVB-T.
Nota
La Sintonizzazione Automatica (DVB-C)n on è applicabile
Canale Tipo di Antenna Air
nel Regno Unito.
Paese Italia
Immagine Modo DTV+ATV 1).Premere il tasto MENU e premere i tasti ▼▲ per
Inizio selezionare il menu CHANNEL e quindi premere il tasto OK.
Audio
2). Premere i tasti ▼▲ per selezionare Sintonizzazione
Orologio
automatica e quindi premere il tasto OK, selezionare il
tipo di antenna su cavo significa DVBC.
Impostare
Canale Tipo di Antenna Cavo
Paese Italia
Blocco
Immagine Modo DTV+ATV
MENU Ritorno Sposta OK OK Inizio
Audio
4).In modalità Paese, premere i tasti ◄► per selezionare il
Orologio
paese in cui si utilizzerà la TV.
Impostare
5).Nella voce Modalità, premere i tasti ◄► per selezionare
Blocco
la modalità di sintonizzazione: ATV / DTV / DTV + ATV.
MENU Ritorno Sposta OK OK
Premere il tasto ▼ per selezionare Start per avviare.
3). Premere il tasto ▼ e quindi premere i tasti ◄►▼▲
6).La sintonizzazione dei canali inizia. Questa operazione per selezionare il paese in cui si utilizzerà la TV.
può richiedere fino a alcuni minuti. Il display mostrerà il 4). Nel menu Modalità, premere i tasti ◄► per selezionare
progresso della sintonizzazione e il numero di canali trovati. ATV / DTV / DTV + ATV.
5). Selezionare avvia per accedere al menù, come qui di
7). Se si vuole saltare la sintonizzazione DTV, premere il seguito, per selezionare la modalità di ricerca.
pulsante MENU per interrompere la sintonizzazione in corso.
Veloce
Canale
Si passerà direttamente alla sintonizzazione ATV. È possibile Completo
Immagine Avanzato
ripetere il passo precedente se si desidera saltare la
sintonizzazione ATV. Un promemoria di installazione Audio
rinominare i canali, selezionare Programme Edit nel menu 6). La sintonizzazione dei canali inizia. Questa operazione
può richiedere fino a alcuni minuti. Il display mostrerà il
Channel. progresso della sintonizzazione e il numero di canali trovati.
Scansione Ch12
Canale
7).Se si vuole saltare la sintonizzazione DTV, premere il
Trovati Canali Digitali pulsante MENU per interrompere la sintonizzazione in
Immagine
DTV: 3 corso. Si passerà direttamente alla sintonizzazione ATV.
Radio: 0
Audio È possibile ripetere il passo precedente se si desidera saltare
Dati: 0
Trovati Canali Analogici: 0
la sintonizzazione ATV. Un promemoria di installazione
Orologio apparirà alla successiva accensione della TV, se non è
trovato alcun canale.
Impostare
Nota
Frequenza 474000K
Canale
Tutti i canali inclusi ATV, DTV e Radio possono essere Symbol Rate 6875K
sintonizzati in un'unica volta, se il tipo di sintonia è DTV+ATV. Immagine Modulazione Auto
2.MENU IMMAGINI
Modifica del Programma Il secondo elemento del MENU è il MENU PICTURE. Potete
001 The HITS DTV regolare qui l'effetto delle immagini, come contrasto,
002 TMF DTV luminosità, ecc. Premere ▼▲ per spostarsi, premere OK
003 UKTV Br’tldeas DTV per effettuare la regolazione.
004 f th DTV
005 Ideal World DTV
006 Colourbars100 DTV Modalità Immagine Standard
Canale
001 Kiss Radio Luminosità 50
002 Smash Hits! Radio Immagine Contrasto 45
003 Kerrang! Radio Nitidezza 60
Cancella Saltare Audio
Colore 45
Sposta Rinominare FAV Favorito
Tinta 0
Orologio
Cancella: Premendo il tasto rosso, il canale evidenziato sarà DNR Medio
cancellato. Impostare Contrasto Dinamico Medio
Salta: Premere il tasto giallo per selezionare la funzione Skip Rapporto d'Aspetto 16:9
e l'icona SKIP sarà visualizzata accanto al programma e sarà Blocco
Temperatura colore Normal
saltato quando si cambia il programma. Backlight 14
Sposta: Premere il tasto verde per selezionare il canale che MENU Ritorno Sposta OK OK
si vuole spostare. Un'icona apparirà davanti al numero del
canale. Quindi premere i tasti ▼/▲ in una nuova posizione Nota
e premere il tasto verde per confermare.
Rinomina: (Solo per ATV) Premere il tasto blu per 1).Ci sono tre modalità di temperatura dei colori che
rinominare il canale. Premere i tasti numerici circolarmente possono essere selezionati: normale, caldo, freddo.
per immettere un nuovo nome e premere il tasto OK per 2).L'impostazione PC è disponibile solo in modalità PC:
confermare (il tasto numerico come nella tabella seguente). può regolare la posizione orizzontale, posizione
verticale, dimensione e fase.
1 2 3
abc def 3.MENU AUDIO
4 5 6 Il terzo elemento del MENU è il MENU AUDIO.
ghi jkl mno Qui è possibile regolare l'effetto audio, ad esempio gli acuti,
i bassi, il bilanciamento, ecc.
7 8 9
Premere ▼▲ per spostarsi, premere OK per effettuare la
pqrs tuv wxyz regolazione.
Modalità Audio Standard
FAV: Premere il tasto FAV (invece dei tasti colorati) per Canale
Alti 0
impostare il canale preferito. (Se si vuole visualizzare
Bassi 0
l'elenco dei canali preferiti è necessario uscire dal menu Immagine
Bilanciamento 0
Program Edit e quindi premere il tasto FAV.)
Audio Volume Automatico On
5). Common Interface Surround Sound Off
Orologio
Questo menù può visualizzare le informazioni della scheda SPDIF Auto
Elenco dei dispositivi: questo sottomenu, vengono Per aprire il menù premere nuovamente il pulsante REC.
elencati i dispositivi USB collegato al televisore. Per interrompere la registrazione, premere il pulsante stop.
È possibile selezionare il dispositivo e quindi premere il È possibile anche accedere al Menu Lettore multimediale
tasto rosso per formattare il dispositivo USB. per visualizzare i programmi registrati in modalità Filmato.
Elenco dei dispositivi
Dispositivo Spazio Disponibile File di Sistema Riprodurre la registrazione:
sda1 192 MB FAT32
Il programma registrato sulla "USB" sarà salvato
Funzione nella cartella "Registrazione USB" sul dispositivo.
Formato
Hot key Lo si può riprodurre nel sistema di file del PVR e nel
Sposta su sottomenù Gestore file.
OK
EXIT
Sposta giù
Seleziona
1.Le dimensioni di memorizzazione su USB possono
MENU Ritorno essere tra 128MB e 500GB, ma per uso pratico si
EXIT Uscita raccomanda da 2GB a 500GB.
2.Il video può diventare pixellato quando la
Registrazione programmata: Qui è possibile impostare frequenza video è troppo bassa. Ciò può essere
l'elenco delle registrazioni programmate. È possibile causato dal collegamento di un cavo prolunga USB
anche cancellare le registrazioni programmate impostate.
invece di collegare direttamente la USB alla TV.
Elenco delle Registrazioni Programmate 3.Non tutti i dispositivi USB sono compatibili.
Registrazione
Reg
g ist Programmata
Standby
Nota
Assicurarsi che il dispositivo di salvataggio utilizzato per La riproduzione di file di registrazione
registrare sia inserito nell'ingresso USB sul retro dell'unità La TV Haier registra I programmi nel dispositivo USB nel
ed è compatibile per la registrazione. Se il dispositivo di formato .ts, che è il formato usato per trasmetter la TV ad
memorizzazione non è compatibile, sarà chiesto di alta definizione. Se altri TV, PC, Laptop, DVD, o qualsiasi
formattarlo. Entrare nel menù del sistema di file PVR e altro dispositivo o periferica non supportano o
selezionare elenco dispositivi per formattare il dispositivo. riconoscono il file *.ts, non si potrà riprodurre questo
file. Si può riprodurre *.ts files su un computer o un
Non è possibile registrare se il segnale è criptato laptop con il corretto software. Consultare Internet
dalla CI+. oppure un fornitore IT per maggiori informazioni sul
software da usare. Attenzione: Haier non è responsabile
per qualsiasi software scaricato dal cliente o negozio, se
9.Time Shift contiene virus o provoca qualsiasi malfunzionamento a
Premere il tasto ►II per mettere iin pausa il programma causa della installazione di questo software. Il cliente lo
che si sta guardando per attivare la funzione Time Shift. usa a proprio rischio e pericolo.
Verrà visualizzato il menu seguente. Questo menu sparirà
dopo alcuni secondi.
00:00:00
00:00:05
Tempo a disposizione
Play Pausa Stop FB FF 00:00:00/04:13:20
10.Lettore USB
Premere il tasto sorgente, e selezionare USB nella lista sorgente, premere il tasto OK per accedere al menu USB.
Assicurarsi che il dispositivo USB sia collegato allo slot. Possono essere selezionati quattro tipi di elementi multimediali,
quali foto, musica, filmati e testo. Selezionare il tipo di elemento multimediale premendo ◄►, premere il tasto OK per
accedere al menu di selezione del disco.
Haier Innovation Life
Premere ▼ / ▲, selezionare il disco e la cartella giusta, premere OK per accedere ai file multimediali elencati. Premere il
tasto rosso per tornare al menu di selezione del tipo di elemento multimediale.
Selezionare il file multimediale premendo ◄► o ▼▲, quindi appare la schermata di anteprima. Premere il tasto ► per
riprodurre il file multimediale a schermo intero. Quando il file multimediale è in riproduzione, premendo il tasto ▼ sarà
visualizzata la barra di controllo.
FOTO
USB1/Pic
Fotografie
Funzioni Base
Quando le foto sono riprodotte, premere il tasto “▼”” del telecomando, una menu di aiuto apparirà in basso
sullo schermo.
Play/Pause Premere il tasto “Play/Pause” del telecomando per riprodurre o mettere in pausa.
Prev. Premere il tasto “Left” del telecomando per leggere la foto precedente.
Next Premere il tasto “Right” del telecomando per leggere la foto successiva.
Premere il tasto blu del telecomando per riprodurre una foto oppure riprodurre
Quick Menu
tutte le foto.
Musica
USB1/Music
.. 1/1 Titolo:
Album:
10547672.mp3 Artista:
Traccia
14953359.mp3 Anno: 2010-09-30
1/2
10547672
PLAY
00:00:53 00:00:00
MUSICA
Quando la musica viene riprodotta, premere il tasto “►” per selezionare il menu di toolbar.
Funzioni Base
Filmati
Le funzioni sono simili a quelle delle “Fotografie”, riferire al paragrafo “Fotografie”.
Funzioni Base
Set A:Premere il tasto “Left/Right” del telecomando per selezionare A e B, il filmato passerà
da A a B.
ZOOM IN: Premere il tasto “Left/Right” del telecomando per selezionare questa funzione.
(Se il documento è più grande di 1920x1080, questa funzione non è supportata)
ZOOM OUT:Premere il tasto “Left/Right” del telecomando per selezionare questa funzione.
(Questa funzione non è supportata per video HD con risoluzione maggiore di 1920x1080)
Select Time: Premere il tasto “Left/Right” del telecomando per selezionare questa funzione,
premere il tasto “ok” per selezionare il tempo di riproduzione.
TESTO
Premere ”▼ /▲” per selezionare la pagina precedente/successiva, inserire il numero e OK per saltare alla
pagina desiderata.
Fornisce l'elenco dei principali tipi di file che sono riprodotti da un dispositivo USB:
Volumen(comprobar si está
activado el Silencio o si las
Immagine Muto
conexiones de audio son
normale incorrectas)
Rumore di
Nessun colore Sistema de TV
sottofondo
Ho collegato un lettore DVD o un Ciò vale per qualsiasi dispositivo collegato alla TV.
altro dispositivo alla mia TV e non 1.Spegnere TV e DVD (staccare la presa a parete, non in standby).
funziona. 2.Spegnere qualsiasi dispositivo collegato alla presa SCART.
3.Scollegare lo spinotto SCART dalla TV.
4.Collegare e accendere la TV
5.Collegare e accendere il DVD
6.Selezionare HDMI dal menu Source
7.Premere play sul lettore DVD e verificare che l'immagine sia
riprodotta correttamente
NOTA: La presa SCART ha priorità su quella HDMI ed è importante
che il dispositivo collegato alla presa SCART della TV sia spento
(non in standby).
Osservare queste istruzioni. Se il dispositivo funziona e il lettore
DVD funziona, la TV è OK è solo un po' confusa.
Probabilmente gli spinotti HDMI sono stati rimossi e ricollegati
mentre la TV era accesa.
Non rimuovere o collegare mai i cavi HDMI o qualsiasi altro
dispositivo digitale con il dispositivo acceso.
Spegnere sempre tutti i dispositivi quando si scollega o collega
un qualsiasi dispositivo digitale.
06 Specifiche
TV LED LCD 22" FULL HD 1080P Digital
FULL HD
Qualità immagine Digitale integrato.
televisione: Dimensioni schermo: 55cm
Risoluzione 1920 x 1080 pixel 50Hz.
DVB-T, DVB-C
DTV Tuner Decorder 16/32/64/128/256 QAM modulation/QPSK Modulation
MPEG2,MPEG4,H.264
2 prese HDMI.
1 presa SCART.
Presa ingresso PC.
Presa video component.
Composite.
1 porta USB.
1 porta cuffia.
Connettività: 1 porta COASSIALE.
Supported Systems:PAL+ SECAM
Numero di canali Memorizzabili:1000(DTV),100(ATV)
TV( RF) :75Ω Non bilanciato
AV Video-Input:75Ω,1V-P,RCA
AV Audio-Input:20KΩ,500mB RMS
YPbPr/HDMI Video Input:480i, 480p, 576i, 576p, 720p, 1080i, 1080p
NICAM stereo sound system.
Qualità audio: 2 x 3watts RMS power output.
2 prese HDMI.
1 presa SCART.
Presa ingresso PC.
Presa video component.
Composite.
1 porta USB.
1 porta cuffia.
Connettività: 1 porta COASSIALE.
Supported Systems:PAL+ SECAM
Numero di canali Memorizzabili:1000(DTV),100(ATV)
TV( RF) :75Ω Non bilanciato
AV Video-Input:75Ω,1V-P,RCA
AV Audio-Input:20KΩ,500mB RMS
YPbPr/HDMI Video Input:480i, 480p, 576i, 576p, 720p, 1080i, 1080p
NICAM stereo sound system.
Qualità audio: 2 x 3watts RMS power output.
2 prese HDMI.
1 presa SCART.
Presa ingresso PC.
Presa video component.
Composite.
1 porta USB.
1 porta cuffia.
Connettività: 1 porta COASSIALE .
Supported Systems:PAL+ SECAM
Numero di canali Memorizzabili:1000(DTV),100(ATV)
TV( RF) :75Ω Non bilanciato
AV Video-Input:75Ω,1V-P,RCA
AV Audio-Input:20KΩ,500mB RMS
YPbPr/HDMI Video Input:480i, 480p, 576i, 576p, 720p, 1080i, 1080p
NICAM stereo sound system.
Qualità audio: 2 x 8watts RMS power output.
2 prese HDMI.
1 presa SCART.
Presa ingresso PC.
Presa video component.
Composite.
1 porta USB.
1 porta cuffia.
Connettività: 1 porta COASSIALE .
Supported Systems:PAL+ SECAM
Numero di canali Memorizzabili:1000(DTV),100(ATV)
TV( RF) :75Ω Non bilanciato
AV Video-Input:75Ω,1V-P,RCA
AV Audio-Input:20KΩ,500mB RMS
YPbPr/HDMI Video Input:480i, 480p, 576i, 576p, 720p, 1080i, 1080p
NICAM stereo sound system.
Qualità audio: 2 x 8watts RMS power output.
AUX_Power
V_5V_AUX --> SY8008D --> V_3.3V_AUX
-> MOS --> V_3.3V
MAIN_Power
DDR3 V_5V --> SY8008D --> V_1.5V
64X16
-> SY8009B --> V_1.0V
DDR3
AV OUT
SPI CODE/DATA FLASH
YPBPR1
FULL SCART 4MB/8MB
CVBS
AV
YPBPR2
YPbPr Dual LVDS 10BIT
AV/YPbPr Audio audio PANEL
1920x1080
USB
USB SIS289
TS
CI+ EU
TS
SPDIF
H/VSYNC
RGB analog Audio 3113&1517
VGA(PC) PC/DVI L/R
TUNER I2C/IF
HDMIA/B
HP_L/R
EARPHONE
HDMI*2
IR/KEYPAD
INTERFACE
2012-5-21 D808
Ў㾷⏽އछ䯂乬ˈ TO-220B
ࡴϔ乫Ѡᵕㅵ˄D808˅ SBR20100
2012-11-6 1
2012-10-25 ᬍԢ⏽-10oCϡਃࡼ T102 ZY-T0134˄PM38˅ 1 2 D806
D803 D804 㾘㒘ӊ㒳ϔᬍЎ450V㗤य़ D809⬅1N4007ᬍЎFR107 T103 NC/EFD25 3 2 TO-220B
3 SBR20100 Q806
RL207 RL207 C1038 C1040 V_12V
10 C1022
1 2200pF L806 0.1uF/50V/0603 0.1F/25V/0603 QM3005 C1041
D807 D805 10
3 1 1 2 +12VB 2 3 223/50V/0805 V_12V
RL207 RL207 + EC805 NC 2
NP1 3 3uH-5A
100uF/450V 6 3
12V +
+ +
1
R865 11 7 C1035 R858 ߴ䰸њEC806
68K-2W-J˄ゟᓣ˅ C1034 NC
2 12V C1037 470uF/16V 10K
C1053䎳݀ᵓBOMϡᇍ
ⶀᮁ⬉䏃 ݀ᵓBOM 10uF/50 472/1KV 2200pF
NP2
D811 R881 R882 C1039 V_3.3V_AUX
NC/FR107 NC/1M/1206 NC/1M/1206 C1056 0.1uF-50V-K-0805(X7R) NB2 1000uF/25V
C1053 10uF/50V 12 R867 47R-1206 C1081 R870
D812
1N4148
4 3 12
1 1000uF/25V 33K
D801 22V-1/2W-1206 ลᇕ
R869 47R-1206
10k
LF801
H:ON
R319
60mH 0.45mm
L:OFF
8 4
2 1 8
6 GND R875
D809 5 68k
R876 R877 R878 + R880 1N4007 GND Q808
3,4 SIS_PSON
CX1 470K/1206 470k/1206 470k/1206 10R/1206 NP2 3904
0.22u/250VAC NB1
5
U807 C1051
9
9
5 2 1n
D810
1N4007
3 5V GND
VDD
RI 6 GND
GATE 4 3
R883 R884 4 5V
5V
FB7
10R
1M/1206 2 CS
1M/1206 FB
GND
R885 R888 JR1 0R-1206
2
1M/1206 1M/1206
1
JR2 0R-1206
3906 Q810 JR3 0R-1206
R889 ࡴC001,ᬍEMCᗻ㛑 V_12V
Q811 SMK0870F ϝϾˌ⬉䰏ഄݐخᆍ
100R-0805
CY800 CY801 3
471 471 EC3䎳݀ᵓϡϔḋ C24
݀ᵓ220uF/16V
1
0.1F/25V/0603 R874
R890 ᴀᵓᬍ470/16V C1066䎳݀ᵓϡϔḋ
R893 100K ݀ᵓ220uF/16V
10K/0805 C001 U2 C17 L2 Q809
8
1
R891 R892 470R-0805 ᴀᵓᬍ470/16V
100P/1KV +12VB 10uH3.8A
1K/0805 EC3 AO4468
R886
3 4 22R-0805 103/25V/0603 V_5V_AUX
NC/24K-1206
470uF/16V
BS
V_5V
C1068
+12VB 2 3 +5V_Standby 8 1
1
LF800 VIN SW
102/25V/0805
7 3
NC/SS
R894
1
14*r7*H4mm-1mH 5 6 2
470R/1206 R27
4
1
1 2 RT8296A FB 5 4
R898 R899 + C25 100K C1066
D4 + 470uF/16V
1
U808 1K 36K/0603 SS24-1206
C1069
2
2012-8-1 0.1uF/50V/0603
2
RV1 101-0805 PC817 7 9 C1061
+
GND
COMP
RV1ԡ㕂DCN C1070
3
2
ON/OFF GND 0.1uF(X7R)
㒳ϔᬍЎ561 NC/2.2u-0805 RT8296A C22
4
6
C1063
2
14D561K R900 EC4 0.1uF(X7R)
1R2-1206 3.3nF/25V
RDH5-3A-W R895 1K 470uF/16V
RT1 C1071
R896 1R2-1206 R31 R26
NTC-5D7/5D2-07 R897 1R2-1206 U809 0.1F/25V/0603 47K R34 10uF(X5R)
R903 TL431 C26 R32
1R2-1206
R902 3.3nF/25V 7.5K/0603 200K R26݀ᵓЎNC
R901 ᴀᵓᬍ10uF(X5R)
100K 10K R898,R900,R901,R902䎳݀ᵓϡϔḋ R35 ᬍ㒍⊶66mV䰡㟇57mV
݀ᵓ0603
1
F800 ᴀᵓᬍ0402
3.15A 250VAC C23 R36 36K/0603
2
CY802 5.6K 1%
101-0805
222 C26䎳݀ᵓϡϔḋ C23䎳݀ᵓϡϔḋ
݀ᵓ1000P ݀ᵓ0603 J4
ᴀᵓᬍ3300P ᴀᵓᬍ0805
1
2 4PIN-2.0_FOR_TEST
1
2
1
2
1
V_12V V_5V_AUX 1 3
TP1 TP3
4
J8 J7 J3 V_5V SIS_PSON 2 HS2 2
TP2 TP4 HS1
CN805 CN800 V_5V_AUX Radiator_for_Q810 Radiator_for_Q806
1 1 1 3 3
AC IN SW V_5V SIS_PSON V_12V TP5
2 2 2 GND
2pin-2.0mm 2pin-2.0mm
2pin-2.0mm
1
2
R832 R700
47R-0603 OVP + C931
10K R721 DRV C1026
LED1 1 20 ON/BK 10K Q103 220uF/50V 0.1uF-50V-K-0805(X7R)
CH1 EN V_5V
C34 MDD1951
LED2 2 19 0.1uF-50V-K-0805(X7R) TO252-DPAK C37
CH2 VCC 1 14
UVLO SS 101-0805 R826
LED3 3 18 1.5K FB115
CH3 AGND OVP 2 13 56-4A-1206
OV COMP
LED4 4 17 DB R14 U5 C35 R700䎳݀ᵓϡϔḋ
CH4 SDBX ON/BK 3 12 FB ݀ᵓ22R
R831 EN AP3039A FB
5 16 SHD 51K 100R 0.1uF-50V-K-0805(X7R) ᴀᵓᬍ47R CN2
PGND1 SDB C15 1uF-0603 V_12V 4 11 SHD GND
VIN SHDN R839 R2297 NC/HEADER 2
6 15 R830 FB C18 0.1uF(X7R) 3.3K 10K
PGND2 FB 5 10
20K VCC AGND LED+ 3 1
LED5 7 14 4 3 1 2
CH5 U3 ISET DRV 6 9 4 2
OUT CS
LED6 8 13 BX R828 R829 C14 R65 0.3-1/4W-J-1206
CH6 AP3608E FBX 7 8
8.2K 270K 1uF-0603-25V PGND RT R68 0.3-1/4W-J-1206
9 12 C27 R750
LED7 R69 0.3-1/4W-J-1206 NC/47R
CH7 NC 1uF-0603 R18 FB1
LED8 10 11
R828 470K
CH8 PWM R856 NC/1R-1206
21.5ᇌ18K˄䜡أᑇ㒓˅ C750
NC/1R-1206
R860
R76 23.6ᇌ8.2K˄䜡أᑇ㒓˅ C31 C32 NC/100pF
10K 102/25V/0805 103/25V/0603
BL-ADJUST
CN802
CN804 LED1
LED1 CN803 1
1 LED1 LED2
26ᇌՓ⫼0Rˈ݊ᅗሎᇌ㾚⬉⌕㗠ᅮ LED2 1 LED3 2 J2
NC 2 LED2
R850 LED3 2 LED4 3
3 LED3 LED1
R834 R835 LED4 3 LED+ 4 1
V_5V SHD 4 LED4 LED3
LED1 LED2 LED5 LED6 4 5 2
5 LED+
NC/100R-0603 LED+ 5 LED5 6 3
NC LED+ 6 7 LED+
LED5 6 LED6 4
Փ⫼CN2ᯊˈ䌈Ϟ 7 8 LED5
LED6 7 LED7 5
R836 LED5 8 9 LED7
R837 LED7 8 LED8 6
LED3 LED4 LED6 9 10
LED8 9
LED7 LED8 LED7 10
10 NC/FOR CPT
NC LED8 11 NC/FOR CPT
LED
NC 12 NC/FOR CPT
HEADER 12
CN806
LED9 V_3.3V
U4 R838 R843 R845 LED10 1
10K NC/510K NC/20K LED11 2
LED9 1 20 ON/BK BL-ADJUST FB FB1 LED12 3 R15
CH1 EN V_5V 4 4.7K
LED10 2 19 LED+ 5 R16
CH2 VCC 18.5ᇌᠡ䌈 LED+ 6 1k
R844 7
LED11 3 18 BL-ADJUST
3
BL-ADJUST H:OFF
R24 1K 1 Q7
4 SIS_BL_EN_N 3904
2
2 4 6 8 2 4 6 8 2 4 6 8
1 3 5 7 1 3 5 7 1 3 5 7
LVDSA_TX4P 6 5 SIS_LVDSA_TX4_DP 3 SIS_LVDSA_TX0_DP 4
R33 6.8K SIS_SPI_CLK C11 N22 RXO1+
SA_GPIO3/EXT_LRSYNC LVDSA_TX4N 8 7 SIS_LVDSA_TX4_DN 3 SIS_LVDSA_TX1_DP 4
D11 RXO2+
SA_GPIO4 SIS_LVDSA_TX2_DP 4
R223 10K GPIO23 GND
D16 N23 RP26 47RX4 RXOC+
12 AUDIO_CTL SA_GPIO5 LVDSB_TX0P 2 1 SIS_LVDSB_TX0_DP 3 SIS_LVDSA_CLK_DP 4
C17 M21 RXO3+
11 SPK_MUTE_N SA_GPIO6/SPK_MUTE LVDSB_TX0N 4 3 SIS_LVDSB_TX0_DN 3 SIS_LVDSA_TX3_DP 4
GND D17 M23 RXO4+
SA_GPIO7/SPK_EN LVDSB_TX1P 6 5 SIS_LVDSB_TX1_DP 3 SIS_LVDSA_TX4_DP 4
D19 M22
HW TrapV_3.3V_AUX
7 HP_DET SA_GPIO8/HP_DET LVDSB_TX1N 8 SIS_LVDSB_TX1_DN 3
L21 RP27 7 47RX4 RXE0+
LVDSB_TX2P 2 1 SIS_LVDSB_TX2_DP 3 SIS_LVDSB_TX0_DP 4
System I2C TP16 DEBUG0 B16 L22 RXE1+
SA_GPIO9 LVDSB_TX2N 4 3 SIS_LVDSB_TX2_DN 3 SIS_LVDSB_TX1_DP 4
SIS_MS_SCL
R218 2.2K DEBUG1 A14 K21 RXE2+
SA_GPIO10 LVDSB_CLKP 6 SIS_LVDSB_CLK_DP 3 SIS_LVDSB_TX2_DP 4
SIS_MS_SDA R217 2.2K TP24
FS2 TP25 DEBUG2 A15 K22 5 47RX4
SA_GPIO11 LVDSB_CLKN 8 7 SIS_LVDSB_CLK_DN 3
TP28 DEBUG3 B15 K23 RP28 RXEC+
SA_GPIO12 LVDSB_TX3P 2 1 SIS_LVDSB_TX3_DP 3 SIS_LVDSB_CLK_DP 4
DEBUG4 B14 J21 RXE3+
DEBUG TP26 SA_GPIO13 LVDSB_TX3N 4 3 SIS_LVDSB_TX3_DN 3 SIS_LVDSB_TX3_DP 4
TP27 DEBUG5 A16 J23 RXE4+
2 4 6 8 2 4 6 8 2 4 6 8
1 3 5 7 1 3 5 7 1 3 5 7
SA_GPIO14 LVDSB_TX4P 6 5 SIS_LVDSB_TX4_DP 3 SIS_LVDSB_TX4_DP 4
J22
LVDSB_TX4N 8 7 SIS_LVDSB_TX4_DN 3
R37 2.2K 5VDETA CF_WP_N A12
8 HDMIA_5VDET SA_GPIO15/CF_WP_N LVDS_MODE_SET 4
R38 2.2K 5VDETB B12
8 HDMIB_5VDET SA_GPIO16/25MCK_IN
D15
C19 SA_GPIO17
R39 R40 7 DVD_ON/OFF SA_GPIO24
GPIO23 D13
4.7K 4.7K C16 SA_GPIO23/ENC_SPI_N LVDS CONNECTOR
SPI NOR FLASH SA_GPIO25/U_2SPI CN14
C18 2*20Pin-2.0mm
D14 SA_GPIO26 2 1
D18 SA_GPIO27/PWM0 C20 C1 12pF RXO0+ 4 GND GND 3 RXO0- 12pF C2
GND GND SA_GPIO28 LRSYNC RO0+ RO0-
B10 C3 12pF RXO1+ 6 5 RXO1- 12pF C9
SA_GPIO29/SPI_CS1 C4 12pF RXO2+ 8 RO1+ RO1- 7 RXO2- 12pF C5
C13 C6 12pF RXOC+ 10 RO2+ RO2- 9 RXOC- 12pF C10
SA_GPIO31/CK24.576O C8 12pF RXO3+ 12 ROC+ ROC- 11 RXO3- 12pF C11
GNDGND D9 C12 12pF RXO4+ 14 RO3+ RO3- 13 RXO4- 12pF C13
SA_GPIO34/PWM2 16 RO4+ RO4- 15
C258 C259 C230 12pF RXE0+ 18 GND GND 17 RXE0- 12pF C213
33pF 33pF C229 12pF RXE1+ 20 RE0+ RE0- 19 RXE1- 12pF C19 V_3.3V_AUX
C231 12pF RXE2+ 22 RE1+ RE1- 21 RXE2- 12pF C21
V_3.3V_AUX UA/UM series C215 12pF RXEC+ 24 RE2+ RE2- 23 RXEC- 12pF C214 R7
R241 1K D5 C211 12pF RXE3+ 26 REC+ REC- 25 RXE3- 12pF C212 4.7K
7 UARTA_TX R246 1K C5 UARTA_TX AB9 C227 12pF RXE4+ 28 RE3+ RE3- 27 RXE4- 12pF C219
7 UARTA_RX UARTA_RX UM_MS_SCL SIS_MS_SCL 3 RE4+ RE4-
D6 AA9 30 29
5 IR_SIS IR I2C UM_MS_SDA SIS_MS_SDA 3 GND GND
C6 V_12/5V_LCD 32 31 LVDS_MODE_SET 12pF C28
2,3 SIS_PSON PS_ON 34 GNDLCDOP 33 V_12/5V_LCD
SIS_SPI_CS0_N R239 NC/6.8K F6 36 VCC VCC 35
HDMIA_SCL SIS_HDMIA_SCL 8 VCC VCC
E6 F5 38 37 R10
UA_GPIO0 HDMIA_SDA SIS_HDMIA_SDA 8 VCC VCC
C29 PANEL_ON/OFF
12pF 40 39 OVERDRIVER 12pF C30 NC
CF_WP_N R243 6.8K 5VDETA D7 G6 OP2 OP1
UA_GPIO18 HDMIB_SCL SIS_HDMIB_SCL 8
5VDETB C7 G5
UA_GPIO19 DDC HDMIB_SDA SIS_HDMIB_SDA 8
B9
UA_GPIO20 H3
C8 NC/HDMIC_SCL G3
9 AI2C_SCL D8 UA_GPIO21/AUX_SCL NC/HDMIC_SDA S_SCL R8 PANEL_ON/OFF
9 AI2C_SDA UA_GPIO22/AUX_SDA 4 SIS_MS_SCL
B17 S_SDA R9 NC OVERDRIVER
VGA_SCL SIS_VGA_SCL 7 4 SIS_MS_SDA
C9 A17 NC
2 SIS_BL_EN_N UA_GPIO30/BLEN_N VGA_SDA SIS_VGA_SDA 7
A8 R11 R12
B8 UA_GPIO32/UARTB_RX NC NC
UA_GPIO33/UARTB_TX
PWM3 A9
2 BL_ADJ UA_GPIO35/PWM3/BL_ADJ
C226
1.6ms
150P SiS289_0515 GND
451MS
GND 2012-8-6 V_3.3V_AUX
Ўњ⠽᭭㒳ϔ AUXOK
DCNᬍЎ150pF
FLASH
3.3V
V_3.3V_AUX
2
MX25L6405DMI-12G˄SOP-16˅ R48 D1 0V
TP2 10K
R603 1N4148
27R
1
U6
24
23
22
21
AUX_PWROK
close to C52
1 16 SIS_SPI_CLK C51
HOLD CLK
SOP8-DI
SiS 1uF_0402
SOP8-CLK
2
SOP8-VCC
15 FLASH_SPI_DI 22uF-0805
SOP8-HOLD
VCC DI
C248 3 14
0.1uF(X7R) NC1 NC8 FOR TEST GND GND
4 13
NC2 SOIC8 NC7 4 5 FLASH_SPI_DI
5 208mil 12 WP_N 3 TF4 TF5 6 SIS_SPI_CLK
GND NC3 NC6 SIS_SPI_DO 2 TF3 TF1 TF6 7 TP2
6 11 SIS_SPI_CS0_N 1 TF2 TP TF7 8 V_3.3V_AUX
NC4 NC5 TF1 TF8
SIS_SPI_CS0_N 7 10
SO16-CS VSS R95 1K
SIS_SPI_DO 8 9 WP_N CF_WP_N
DO WP/Vpp
SOP8-CS
SOP8-DO
SOP8-WP/Vpp
VSS
CODE FLASH
17
18
19
20
L1
3.3V Normal Power
2.2uH_2.5A V_IVDD
V_3.3V_AUX
C217 10uF(X5R) U1 V_3.3V
V_5V C218 0.1uF(X7R) SY8009B R1 EC1 470uF/16V
L20 10K_1% C7 0.1uF(X7R) Q2
4.7uH_2A C50 10uF(X5R) GV3407
4 3 C46
VIN LX
SY8009B R3 R224 0.1uF(X7R) C47
5 68K_%1 10uF(X5R)
NC 4.7K
GND MAX=1.9A
R2 100K N207663841 6
EN FB R215
GND
R4 200K
100K_1%
2
R29
3
+ EC2 47K
470uF/16V 1 Q4
2,4 SIS_PSON
3904
2
GND
GND
2012-8-21
L3⬅4.7uHᬍЎ2.2uH V_3.3V_AUX
ᬍ3.3V㒍⊶⬉य़ L3 L4
2.2uH_2A 3.4V 4.7uH_2A
L5 V_1.5V
4.7uH_2A
1.5V V_5V_AUX U15 C33 0.1uF(X7R)
SY8008D R219 C228 10uF(X5R)
V_5V U17 C220 10uF(X5R) L6 220K_1% C221 10uF(X5R) C224 10uF(X5R)
SY8008B R13 C36 10uF(X5R) 4.7uH_2A C223 10uF(X5R)
L7 100K_1% C225 0.1uF(X7R) 4 3
4.7uH_2A VIN LX
4 3 R229 SY8008D R220
VIN LX 100K 255K_1%
R230 SY8008B R231 C42 10uF(X5R)
100K 51K_1% C43 0.1uF(X7R) 1 5
C222 10uF(X5R) EN OUT/FB
GND
C41 0.1uF(X7R) 1 5 R233
600mA
EN OUT/FB 100K_1%
GND
R234
200mA
100K_1%
Power on max 50mA
2
Standby 15mA
1
5V
4.7K
0.1uF(X7R)
8
8
H1 H2
SRQ7
R25
ON 200K 7 9 7 9 SRQ5
0V
R232
SRQ6
6 2 6 2
5 3 5 3
R28 <12mS
3
OFF 10K
1 Q3 1.76mS HOLE HOLE
4
4
4 LCDVDD_EN
3904
R30
2
10K GND GND
12V
C64
R1 AUX_KEY0 A5 KEY1 DDR_VREF AB4 CI_DAT1/UM_GPIO48 I2S_OUT_SD1_LINEOUT V11 TP20
8 HDMIB_RX0_DP HDMIB_RXP0 HDMI AUX_KEY1 10 CI_D2 CI_DAT2/UM_GPIO49 I2S_OUT_SD2
R2 KEYPAD T5 Y13 TP21
8 HDMIB_RX0_DN HDMIB_RXN0 10 CI_D3 CI_DAT3/UM_GPIO50 I2S_OUT_SD3
T1 H6 T4
8 HDMIB_RX1_DP HDMIB_RXP1 KEY2 SCART_FUNSEL_SHIFT 10 10 CI_D4 CI_DAT4/UM_GPIO51
T2 H5 R55 C65 C66 T6 R56
8 HDMIB_RX1_DN HDMIB_RXN1 KEY3 YPP_FBI0 10 10 CI_D5 CI_DAT5/UM_GPIO52
U1 V4 33R
8 HDMIB_RX2_DP HDMIB_RXP2 10 CI_D6 CI_DAT6/UM_GPIO53
U2 1K_1% 0.1uF(X7R) 0.1uF(X7R) U6 Y8
8 HDMIB_RX2_DN 10 CI_D7 TS_CLK 10
0.1uF(X7R)
P1 HDMIB_RXN2 AC2 CI_DAT7/UM_GPIO54 TRANSPORT TS_CLK
W8
8 HDMIB_RX_CLK_DP HDMIB_RXCP 10 CI_ADD0 CI_ADDR0/UM_GPIO55 STREAM TS_VALID TS_VALID 10
P2 AA4 V10
8 HDMIB_RX_CLK_DN HDMIB_RXCN 10 CI_ADD1 CI_ADDR1/UM_GPIO56 TS_FRAME TS_FRAME 10
K4 AB2 W10
NC 10 CI_ADD2 CI_ADDR2/UM_GPIO57 TS_DAT0 TS_DATA0 10
SIS_HDMI_ARC J3 J5 CLOSE TO DIVIDER AA3
HDMI_ARC NC 10 CI_ADD3 CI_ADDR3/UM_GPIO58
E5 GNDGND AA2 Y10
8 HDMI_CEC HDMI_CEC 10 CI_ADD4 CI_ADDR4/UM_GPIO59 TS_DAT1/SM_GPIO36 TS_DATA1 10
J4 H20 AA1 V9
HDMI_RSET NC 10 CI_ADD5 CI_ADDR5/UM_GPIO60 TS_DAT2/SM_GPIO37 TS_DATA2 10
GND R57 500_1%HDMI_RSET Y1 W9
10 CI_ADD6 CI_ADDR6/UM_GPIO61 TS_DAT3/SM_GPIO38 TS_DATA3 10
F4 Y2 Y9
8 SIS_HDMIA_HPD HDMIA_HPD V_1.5V 10 CI_ADD7 CI_ADDR7/UM_GPIO62 TS_DAT4/SM_GPIO39 TS_DATA4 10
G4 Y4 V8
8 SIS_HDMIB_HPD HDMIB_HPD 10 CI_ADD8 CI_ADDR8/UM_GPIO63 TS_DAT5/SM_GPIO40 TS_DATA5 10
W3 W7
10 CI_ADD9 CI_ADDR9 TS_DAT6/SM_GPIO41 TS_DATA6 10
W4 Y7
10 CI_ADD10 CI_ADDR10 TS_DAT7/SM_GPIO42 TS_DATA7 10
V5
2012-8-31 10 CI_ADD11 CI_ADDR11
V3
Ў䗮䖛CI+1.2⌟䆩ݐᆍᗻ⌟䆩 Y6 CI_ADDR12
ߴ䰸V3ǃY6㛮㛮Ϟⱘ㔥㒰 Y5 CI_ADDR13
CATS
C67
C68
C69
C70
C71
C72
C73
C74
G1 ᑊࡴR216ǃR222ܗӊ 10 CI_WE_N V6 CI_WEN AA7
No ball/HDMIC_RXP0 10 CI_OE_N CI_OEN CATS_CLK CATS_CLK 10
G2 AB1 AB6
NC/HDMIC_RXN0 10 CI_WAIT_N CI_WAITN CATS_VALID CATS_VALID 10
H1 W1 Y3 AA6
NC/HDMIC_RXP1 USBA_DP 10 CI_RESET CI_RESET CATS_FRAME CATS_FRAME 10
H2 USB W2 U3
NC/HDMIC_RXN1 USBA_DM 10 CI_IRQ_N CI_IRQN
J1 U5 AB5
NC/HDMIC_RXP2 10 CI_CE1_N CI_CE1N CATS_DAT0 CATS_DATA0 10
1uF_0402
1uF_0402
J2 W5 AC5
10uF(X5R)
10 CI_IORD_N CATS_DATA1 10
C116 0.1uF(X7R)
0.1uF(X7R)
0.1uF(X7R)
C117 0.1uF(X7R)
C118 0.1uF(X7R)
C119 0.1uF(X7R)
0.1uF(X7R)
C120 0.1uF(X7R)
0.1uF(X7R)
C249 0.1uF(X7R)
0.1uF(X7R)
F1 NC/HDMIC_RXN2 W6 CI_IORDN CATS_DAT1 AA5
NC/HDMIC_RXCP 10 CI_IOWR_N CI_IOWRN CATS_DAT2 CATS_DATA2 10
F2 V1 AC4 AB8
NC/HDMIC_RXCN USBB_DP USB1_DP 7 10 CI_CD2_N CI_CD2N CATS_DAT3 CATS_DATA3 10
F3 V2 U4 AC8
NC/HDMIC_HPD USBB_DM USB1_DM 7 10 CI_CD1_N CI_CD1N CATS_DAT4 CATS_DATA4 10
AA8
CATS_DAT5 CATS_DATA5 10
GND CLOSE TO U2 BOTTOM AC7
CATS_DAT6 CATS_DATA6 10
AB7
CATS_DAT7 CATS_DATA7 10
SiS289_0515
SiS289_0515
U16D
V_DDR
DDR_DQS0_DP AB15 DDR_RASN Y14 DDR_CAS_N G7 DQ0 F7 DDR_DQ1
DDR_DQS0_DN AA15 DDR_DQS0 DDR_CASN Y15 DDR_WE_N B2 VDD DQ1 F2 DDR_DQ2 KEYBOARD&IR
DDR_DQS1_DP AA19 DDR_DQS0N DDR_WEN Y22 DDR_CKE D9 VDD DQ2 F8 DDR_DQ3 C75 1n
DDR_DQS1_DN AB19 DDR_DQS1 DDR_CKE Y20 DDR_ODT K2 VDD DQ3 H3 DDR_DQ4 R58 8.2K C76 1n
DDR_DQS1N DDR_ODT K8 VDD DQ4 H8 DDR_DQ5 R59 8.2K CN12
Y16 DDR_MA0 N1 VDD DQ5 G2 DDR_DQ6 R60 4.7K 10PIN-2.0
DDR_DQ0 AB11 DDR_MA0 W23 DDR_MA1 N9 VDD DQ6 H7 DDR_DQ7 R62 1K 10
DDR_DQ0 DDR_MA1 VDD DQ7 4 STB_LED_R 10
DDR_DQ1 AB17 W18 DDR_MA2 R1 D7 DDR_DQ8 KEY0 R61 1K KEY0-in R64 1K 9
DDR_DQ1 DDR_MA2 VDD DQ8 4 LED_G 9
DDR_DQ2 AA11 Y18 DDR_MA3 R9 C3 DDR_DQ9 STANDBY 8
DDR_DQ3 AA17 DDR_DQ2 DDR_MA3 W21 DDR_MA4 VDD DQ9 C8 DDR_DQ10 R63 To dvd 7 8
DDR_DQ4 AA10 DDR_DQ3 DDR_MA4 W16 DDR_MA5 A1 DQ10 C2 DDR_DQ11 1K 7 IR_IN 6 7
DDR_DQ5 AA16 DDR_DQ4 DDR_MA5 V23 DDR_MA6 A8 VDDQ DQ11 A7 DDR_DQ12 KEY1 R226 1K KEY1-in 5 6
DDR_DQ5 DDR_MA6 VDDQ DQ12 V_5V_AUX 5
DDR_DQ6 AC10 V16 DDR_MA7 C1 A2 DDR_DQ13 4
DDR_DQ7 AC16 DDR_DQ6 DDR_MA7 W19 DDR_MA8 C9 VDDQ DQ13 B8 DDR_DQ14 STANDBY KEY0-in 3 4
DDR_DQ8 AB20 DDR_DQ7 DDR_MA8 V17 DDR_MA9 D2 VDDQ DQ14 A3 DDR_DQ15 R66 1K IR_IN C82 KEY1-in 2 3
DDR_DQ9 AC13 DDR_DQ8 DDR_MA9 Y23 DDR_MA10 E9 VDDQ DQ15 4 IR_SIS 12pF 1 2
2
2
DDR_DQ10 AA22 DDR_DQ9 DDR_MA10 V21 DDR_MA11 F1 VDDQ D3 DDR_DQM1 C77 C81 1
DDR_DQ10 DDR_MA11 VDDQ UDM
2
2
DDR_DQ13 AC14 DDR_DQ12 DDR_MA13 VDDQ C7 DDR_DQS1_DP C80 12pF RX47 ESD-3P
DDR_DQ14 AB21 DDR_DQ13 UDQS B7 DDR_DQS1_DN RX46 ESD-3P
1
1
AA12
AA14
AA18
AA20
AB10
AB13
AB16
AB18
AB22
AC12
AC17
AC19
B22
F11
F12
F13
G11
G12
G13
G14
G15
H11
H12
H13
H14
H15
J10
J11
J12
J13
J14
J15
J9
K10
K11
K12
K13
K14
K15
K3
U16F H18 AVDD1P0_HSADC AVSS3P3_AUHP H10
AVDD1P0_HSADC AVSS3P3_AUHP H9
T15 AVSS3P3_AU M8
GND
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
T16 OVDD1P5 AVSS3P3_USB M9
T17 OVDD1P5 V_IVDD V_3.3V AVSS3P3_USB
V_1.5V U15 OVDD1P5
U16 OVDD1P5 V_IVDD FB2 120R-0603
T19 OVDD1P5 F16 1 2 AVDD1P0_HDMI J18
T20 OVDD1P5 IVDD1P0 K18 AVDD3P3_ATV
OVDD1P5 IVDD1P0 GND
U17 K8
U19 OVDD1P5 IVDD1P0 L8 C86 C87 E16
U20 OVDD1P5 IVDD1P0 M18 1uF_0402 1uF-0603 E17 AVDD3P3_HSADCAFE
T18 OVDD1P5 IVDD1P0 N10 AVDD3P3_HSADCAFE
U18 OVDD1P5 IVDD1P0 N11 J17
OVDD1P5 IVDD1P0 N12 K17 AVDD3P3_LVDS
IVDD1P0 N13 AVDD3P3_LVDS
E10 IVDD1P0 N14 AVDD3P3_HDMI L5 L17 AVDD1P0_PLL
V_3.3V OVDD3P3 IVDD1P0 GND AVDD3P3_HDMI AVDD1P0_LPLL
F15 N15 L6 M17
H7 OVDD3P3 IVDD1P0 N16 L3 AVDD3P3_HDMI AVDD1P0_CPLL
P10 OVDD3P3 IVDD1P0 N8 AVDD3P3_HDMIC
P9 OVDD3P3 IVDD1P0 N9
R11 OVDD3P3 IVDD1P0 M6
R13 OVDD3P3 N6 AVDD3P3_USB
R14 OVDD3P3 C12 AVDD3P3_USB
OVDD3P3 OVDD3P3_AUX D12 G8
OVDD3P3_AUX E15 V_3.3V_AUX F8 AVDD3P3_AUHP
OVDD3P3_AUX H8 AVDD3P3_AUHP
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
AVDD3P3_AU
V_3.3V F9
FB3 AVDD3P3_DM
K9
L9
T3
SiS289_0515 120R-0603
L10
L11
L12
L13
L14
L15
F14
V14
V19
V22
N3
H16
M10
M11
M12
M14
M15
W17
M13
1 2 AVDD3P3_HDMI
C88 C89
1uF_0402 1uF_0402
GND K16
M16 AVSS1P0_LPLL
AVSS1P0_CPLL
2012-11-14
V_3.3V_AUX V_IVDD V_1.5V V_3.3V ЎњᬍPCᓣϟ᳝䕏ᖂᑆᡄ
ᵓᑩ㚠⛞C101
C90
C94
C95
C96
C97
C98
C99
C101
C91
C92
C93
1uF(ᵓᑩ㚠⛞)
C159 NC/1uF
1uF_0402
1uF_0402
1uF_0402
1uF_0402
1uF_0402
C100 1uF_0402
10uF_0805
0.1uF(X7R)
1uF_0402
10uF(X5R)
0.1uF(X7R)
close to SiS
AV1/YPbPr YPbPr1/AV1
VGA INPUT RX1 NC/ESD_3P
INPUT
R80 75R
C236 12pF RX2 NC/ESD_3P R81 75R
C237 12pF RX3 NC/ESD_3P R82 75R J11 NC/AV-JACK-3/YPbPr
C238 12pF 1 J12
CON1 R73 330R R0 C102 47nF 1
VGA_R0 5
DZ11AA1-P9_IN 8 R74 330R C103 47nF
SIS_YPP_SOG1 5
1 R R75 330R G0 C104 47nF 2 YPbPr1_Y0 4 YPbPr1_Y0 R225 47R C106 47nF
RED VGA_G0 5 2 NC/ESD_3P SIS_YPP_G1 5 YPP-G/AV input
9 6 7 YPbPr1_Pb0 R77 47R C107 47nF
+5V RGND SIS_YPP_B1 5
2 G R78 330R B0 C105 47nF 3 3 YPbPr1_Pr0 R79 47R C108 47nF
GREEN VGA_B0 5 3 SIS_YPP_R1 5
4 7 2
2
2
2
11 NC GGND 3 B 6
1
1
1
NC/ESD_3P
NC/ESD_3P
NC BLUE 75R 75R 75R
2
2
2
8 4 YPbPr1_Pb0 5
BGND 4
1
1
1
12 1
1
1
1
15 SDA 5
9
2
2
2
10
SCL 5
RX4
RX5
RX6
1
1
1
R83 R84 R85
C109 12pF
C111 12pF
C112 12pF
13 5 R86 47R R0_REF C110 47nF
2
2
2
HS GND VGA_R0_REF 5
14 10 6 YPbPr1_Pr0
VS SGND R87 47R G0_REF C114 47nF 6
8
7
VGA_G0_REF 5
GND
HGND
HGND
R88 47R B0_REF C115 47nF
8
7
VGA_B0_REF 5 GND GND GND
GND GND
16
17
GND
GND CN504 AV-JACK-3/AV
R89 R90 CN505 NC/AV-JACK-3/AV
GND 10K 10K 1 1
1 1
HS R93 100R YPP1_AV1_L0 R92 33K
VGA_HSYNC 5 YPP1_AV1_L 5
VS R94 100R 2 SIDE_AVIN 2 YPP1_AV1_R0 R91 33K
VGA_VSYNC 5 2 2 YPP1_AV1_R 5
VGA_SDA R97 100R 3 3
2
2
SIS_VGA_SDA 4 3 3
VGA_SCL
C113
C233
R98 100R
SIS_VGA_SCL 4
2
2
R99 R100 4 YPP1_AV1_L0 4 RX8 NC/ESD_3P
2
2
2
2
1
1
UARTA_RX 4 4 4
12pF
12pF
RX9 NC/ESD_3P RX7 NC/ESD_3P
UARTA_TX 4
2
2
2
2
RX10 NC/ESD_3P 5 5
1
1
5 5
4.7K
4.7K
RX11 NC/ESD_3P V_5V_AUX VGA_R0 C369 NC/47pF
1
1
1
1
C242 12pF RX12 NC/ESD_3P VGA_G0 C370 NC/47pF
C241 12pF VGA_B0 C371 NC/47pF 6 YPP1_AV1_R0 6
1
1
1
1
C251 NC/33pF
C252 NC/33pF
C239 12pF 6 6
GND GND
8
7
7
8
R237 C244
C240 12pF
GND 47R
8
7
7
8
GND GNDGND SIDE_AVIN
2
GND GND AV1 5
2
R235 47nF
1
75R
1
C234 12pF
R101
RX40 NC/ESD_3P
VGA Audio Input R102
33K GND GND
6 PC_A_L 33K
3 PC_A_R PC_AUDIO_L 5 USB Interface
2 PC_AUDIO_R 5
2
2
5 FB11 EC11
2
2
4 5VUSB1
C232
C235
R115 300-0603 100uF/10V
+
1 1K EAR_OUTL
2
CN13
1
1
USB1_DM 5 EARPHONE-OUTL 5 EAR_OUTL EAR_OUTR
J10
8
7
10
9
8
7
1
USB1_DP 5
12pF
12pF
RX29 C260 V_3.3V
1
1
D D
5
4
3
2
4 ESD-3P 47nF
1
0 R116
GND
Q23 Q24
RX13 NC/ESD_3P
RX14 NC/ESD_3P
GND GND GND RX15 C122 RX16 ESD_0.15P 6 100K
1
0 R596 1K G 2N7002 R597 1K G 2N7002
6
ESD_0.15P NC/1.8PF C123 NC/1.8PF GND 4 AUDIO_CTL
1 R117
GND 5 GND GND
2 L 100K S S
2
PC AUDIO IN 3
3 HP_DET 4
45 0 2
RX48 C131
USB-101B 2 ESD-3P 1uF_0402
1
CN9 R
Headphone GND EC10 GND GND
1
RX36 100uF/10V
SPDIF Output ESD-3P GND
+
CN10SPDIF EAR_OUTR
2
F1 EARPHONE-OUTR 5
CN11SPDIF/ゟ
2
RX39 R111 P150TFT R118 C261 FB12
C124
NC/ESD_3P 100R V_5V 5VUSB1 1K 47nF 300-0603
1
3SPDIFOUT
SIS_SPDIFO 5
2
1
2
1 C128 100uF/10V
0.1uF(X7R)
2
R113 GND GND GND
100R C129 0.1uF(X7R)
1
RX43 RX42 RX41
CN1 NC/ESD_3P
C127 NC/ESD_3P NC/ESD_3P
1
7pin-2.0mm
12pF R106 4.7K
2012-8-21 1 R105 4.7K DVD_AUDIO_R 5
GND R111⬅430RᬍЎ100R 2 DVD_AUDIO_L 5
2
2
6 NC/75R
7 NC/12pF
1
1
1
GNDGND
1
RX45 DVD_ON/OFF 4
ON V_5V
NC/ESD_3P DVD POWER
2
R112
C125 10K OFF 4
1
1000pF 3 C126
2012-9-1 CN4 2 12pF
1
ЎњᬍEN55020乍Ⳃ
4pin-2.0mm 1
C246\C247⬅12PFᬍЎ1000P
GND GND GND 2012-10-25ᬍDVDᑆᡄ
ᡞC121R107ߴ䰸 DVD
2
R114 10K
IR_IN 5 echo gp241 > /dev/sisgpio
RX44 echo gp240 > /dev/sisgpio
2
C130
NC/ESD_3P
1000pF
1
1
GND
DVD Interface
GND
100ohm differential impedance
V_HDMIA
CON5 for TMDS traces.
R119 68R 18 10
4 HDMIA_5VDET +5V TMDS_CLK+ HDMIA_RX_CLK_DP 5
12
TMDS_CLK- HDMIA_RX_CLK_DN 5
R120 100R DDC_CLK0 15
4 SIS_HDMIA_SCL R121 100R DDC_DAT0 16 DDC_CLK 7
4 SIS_HDMIA_SDA DDC_DAT TMDS_D0+ HDMIA_RX0_DP 5
9
TMDS_D0- HDMIA_RX0_DN 5
HDMI_CEC_R 13
R122 1K HDMIA_HPD_R 19 CEC 4
5 SIS_HDMIA_HPD HPD TMDS_D1+ HDMIA_RX1_DP 5
6
TMDS_D1- HDMIA_RX1_DN 5
HDMI_ARC 14
5 HDMI_ARC RSVD 1
TMDS_D2+ HDMIA_RX2_DP 5
17 3
2
2
2
2
2
DDC/CEC_GND TMDS_D2- HDMIA_RX2_DN 5
R123 R124 20
HGND1
2
2
2
2
2
21 8
R125
R126
R127
22 HGND2 TMDS_D0_SHIELD 5
1
1
1
1
1
23 HGND3 TMDS_D1_SHIELD 2
NC/1.2K HGND3 TMDS_D2_SHIELD 11
1
1
1
1
1
TMDS_CLK_SHIELD
1M
HDMI19P_QJ51193-FFB4-7F
NC/100K
RX17 ESD_0.15P
RX18 ESD_0.15P
RX19 ESD_0.15P
RX20 ESD_0.15P
RX21 ESD_0.15P
NC/1M
NC/1M
V_HDMIA
GND
GND GND
V_HDMIA
47K R128 SIS_HDMIA_SDA GNDGND GND GND GND GND GND GND
47K R129 SIS_HDMIA_SCL
2
2
2
2
DDC/CEC_GND TMDS_D2- HDMIB_RX2_DN 5
20
HGND1
2
2
2
2
21 8
R137
22 HGND2 TMDS_D0_SHIELD 5
R135
R136
1
1
1
1
23 HGND3 TMDS_D1_SHIELD 2
HGND3 TMDS_D2_SHIELD 11
1
1
1
1
TMDS_CLK_SHIELD
1M
HDMI19P_QJ51193-FFB4-7F
RX22 ESD_0.15P
RX23 ESD_0.15P
RX24 ESD_0.15P
RX25 ESD_0.15P
NC/1M
NC/1M
V_HDMIB GND GND
L8
L9
L11
L10
GND GND
V_3.3V C137
C135
FB10
100nf 16V 5%
IF-IN+ DIF_P_F0 R144
8.2nH_110mA_+/-0.1nH
100nH_150mA_+/-5%
1uF_0402 C144
C136
41
40
39
38
37
36
35
34
33
32
31
C140 GND
3.3V_Tun IF-IN- DIF_N_F0 R145
8
7
GND
DIF_N 5
VHFL
UHFL
VHFH
UHFH
V_3.3V_AUX
9
8
7
1 30 0.1uF(X7R) 0R-0402 C145
VHFSens
10
VCCRF IRQ NC/47pF_0402
VHFSupply
UHFSupply
CapRFAGC
C141
82pF 50V 5%
1 C146
VCCRF Filter
C142
J5 C253
120pF 100V/5% 120pF 100V/5%
RFAGC_Sense
RFIN R146 2 29 R167
6 0R-0402 RFin V_Sync 1uF_0402 IF AGC GND
5
4
3
2
R147
NC
RFIN 3 28 1.5K IF_AGC0 R154 1K GND
D3 NC V_IF_AGC DMIFGAIN 5
C147
NC/BAV99W 3.3V_Tun C160 3.3V_Tun
150pF 50V 5% 4 27 C148
NC VCCIF 0.1uF(X7R)
U10 6.8nF 50V 10%
5 26 R148 R149
GNDDIG0 GNDIF
L12
L13
Tuner I2C
4.7K
4.7K
6 25 IF-IN- GND
330nH 140mA 5%
AS_XTSel TDA18273 IFP TU_SDA R150 68R SDA
220nH 120mA 5%
AI2C_SDA 4
TU_SCL R151 68R SCL
AI2C_SCL 4
7 24 IF-IN+
GNDDIG1 IFn
GND
8 23 C149 C150
Test1 GNDDIG3 Ўњᮍ֓ᥦ⠜ˈᬙᛣᡞ䆹ֵোⱘLVDSⱘℷ䋳ᇍᤶDŽ
33pF 33pF
9 22
Test2 XTOUT2
10 21
GNDDIG2 XTOUT1 GND
General Vcc decoupling
SCL
SDA
Test1
Xtal
Xtalnot
VCCSYN
CAPREGVCO
GNDSYNT
VTUN
CP
3.3V_Tun 3.3V_Tun
11
12
13
14
15
16
17
18
19
R152
47nF
430 1%
10uF(X5R)
3.3V_Tun
C151
C152
C156
C153 C154 C157 C158
18pF 50V 5% 18pF 50V 5% 220nF 10V +/-10%
C155 2.7nF 50V 10%
Y2 100nF16V 10%
TU_SCL
C162 C163 C164 C165
C161 47nF 12pF
47nF 47nF
1000PF/50V
V_12V GNDGND
GND GND
GND C255 12pF
V_5V C180 12pF
C254 12pF
FULL SCART V_5V CN8 C257 12pF
R177 C181 R185 NC/0_0402 C256 12pF
17 7
R161
C170 C177 2.2K 10uF(X5R) R186 NC/0_0402 R247 22R CI_CE1_N
CN501 2.2uF 51 VCC CE1# 42 CI_WAIT_R_N R178 0R-0402
21 0.1uF(X7R) LINEO_R VCC CE2# 61 CI_REG_N CI_WAIT_N
20 AV1-V L14 VPP1 18 REG# 44 R248 22R CI_IORD_N CI_INPACK_N R179 NC/0-0402
VPP1 IORD#
4.7K
19 CVBSO_FIL GND C C171 1.8uH-0603 R181 VPP2 52 45 R249 22R CI_IOWR_N
18 Q5 B CVBSO_FIL_IN C178 30K R182 VPP2 IOWR# 5 CI_CD1_N
3
CVBSO 5 5 CI_WE_N
+
17 3904 1n RX33 R180 Q12 10k 9 R250 22R CI_OE_N
16 SC1_FB YPP_FBI0 E C172 C173 R164 ESD-3P 20K 3904 1 C179 2.2uF MOI0 47 OE# 15 R251 22R CI_WE_N 5 CI_OE_N
1
YPP_FBI0 5 SiS_LINEO_R 5 MDI0 WE# 5 CI_WAIT_N
15 48 58
R163
Pr SCART_R/C CVBSO_FIL R162 0R-0402 22uF-0805 GND MOI1 CI_RESET
1
MDI1 RESET 5 CI_RESET
1
14 RX38 MOI2 49
2
13 50 MDI2 16 5 CI_IRQ_N
R166
ESD-3P 180pF 180PF 75R MOI3 CI_IRQ_N C182
2
12 MOI4 53 MDI3 IREQ# 60 CI_INPACK_N 12pF
2 1
MDI4 INPACK# 5 CI_CE1_N
4.7K
11 Y SCART_G R183 R184 MOI5 54 59 CI_WAIT_R_N
2
MDI5 WAIT# GND 5 CI_IORD_N
1K
10 47R 22K MOI6 55 33
2
GND GND GND MDI6 IOIS16# 5 CI_IOWR_N
9 MOI7 56
8 SC1_FSO SCART_FUNSEL MDI7 29 CI_ADD0 5 CI_CD2_N
RX32 ESD-3P
7 Pb SCART_B GND MCLKI 20 A0 28 CI_ADD1
GND MCLKI A1 5 CI_D0
6 AV1-L GND 2012-8-10 MIVAL 19 27 CI_ADD2
R181/R189⬅47KᬍЎ30K MIVAL A2 5 CI_D1
5 GND MISTRT 46 26 CI_ADD3
ᬍ2V䕧ߎ⊶ᔶ༅ⳳDŽ MISTRT A3 5 CI_D2
4 R174 NC/0-0402 25 CI_ADD4
3 V_12V A4 24 5 CI_D3
AV-LOUT LINEO_L CI_ADD5
A5 5 CI_D4
2 AV1-R MOD0 64 23 CI_ADD6
MDO0 A6 5 CI_D5
1 AV-ROUT LINEO_R MOD1 65 22 CI_ADD7
MDO1 A7 5 CI_D6
MOD2 66 12 CI_ADD8 CI_REG_N R176 1K
MDO2 A8 5 CI_D7
SCART FUNCTION SEL R187 MOD3 37 11 CI_ADD9 CI_ADD12 R216 1K
5 CI_ADD0
25
24
NC/SCART C183 2.2K MOD4 38 MDO3 A9 8 CI_ADD10 CI_ADD13 R222 1K
MDO4 A10 5 CI_ADD1
2.2uF MOD5 39 10 CI_ADD11 CI_ADD14_PCMCIA R175 1K
MDO5 A11 5 CI_ADD2
GND LINEO_L MOD6 40 21 CI_ADD12
MDO6 A12 5 CI_ADD3
CN500 SCART_FUNSEL MOD7 41 13 CI_ADD13
1
SCART_FUNSEL_SHIFT 5 MDO7 A13 5 CI_ADD4
21 R193 4.7K R189 14 CI_ADD14_PCMCIA
A14 2012-8-31 5 CI_ADD5
1
20 AV1-V R194 C184 30K R190 MCLKO 57
3
2012-8-21 MCLKO Ў䗮䖛CI+1.2⌟䆩ݐᆍᗻ⌟䆩 5 CI_ADD6
19 CVBSO_FIL 1n RX34 R188 Q13 10K MOVAL 62 30 CI_D0 GND
2
R193⬅68KᬍЎ4.7K MOVAL D0 ߴ䰸V3ǃY6㛮㛮Ϟⱘ㔥㒰 5 CI_ADD7
18 1.2K ESD-3P 20K 3904 1 C185 2.2uF MOSTRT 63 31 CI_D1
R194⬅11.8KᬍЎ1.2K SiS_LINEO_L 5 MOSTRT D1 ᑊࡴR216ǃR222ܗӊ 5 CI_ADD8
17 32 CI_D2
2
ᬍSCARTݐᆍᗻ D2 5 CI_ADD9
16 SC1_FB 2 CI_D3
2
15 D3 5 CI_ADD10
Pr 68 3 CI_D4
RX37 ESD-3P
GND D4 5 CI_ADD11
14 GND GND 1 4 CI_D5
GND D5 5 CI_ADD12
13 0~2V ->0~ 0.314V (TV MODE) R191 R192 34 5 CI_D6
GND D6 5 CI_ADD13
12 47R 22K 35 6 CI_D7
11 GND D7
Y 5~8V ->0.785~1.255V (16:9 AV MODE) 5 TS_DATA0
MOI0
10 36 CI_CD1_N MOI1
CD1# 5 TS_DATA1
9 8.8~12V ->1.38~1.883V(4:3 AV MODE) 69
H1 CD2#
67 CI_CD2_N
5 TS_DATA2
MOI2
8 SC1_FSO 70 MOI3
H2 5 TS_DATA3
7 Pb 71 43 MOI4
H2 VS1# 5 TS_DATA4
6 AV1-L GND 72 MOI5
5 H2 5 TS_DATA5
MOI6
5 TS_DATA6
4 MOI7
5 TS_DATA7
3 AV-LOUT GND
2 AV1-R PCMCIA socket MIVAL
5 TS_VALID
1 AV-ROUT AV1-L SCART_AUDIO_L 5 MISTRT
33K R160 5 TS_FRAME
AV1-R SCART_AUDIO_R 5 AV1-V R155 330R C166 47nF YPP_SOG1
33K R159 YPP_SOG1 5
SCART_G R156 47R C167 47nF YPP_G1 MOD0 MCLKI
YPP_G1 5 5 TS_CLK
25
24
NC/SCART SCART_B R157 47R C168 47nF YPP_B1 5 CATS_DATA0 MOD1 C250
1
1
YPP_B1 5 5 CATS_DATA1
C176
SCART_R/C R158 47R C169 47nF YPP_R1 MOD2 NC/12pF
YPP_R1 5 5 CATS_DATA2
1
1
C175
AV1-V R236 47R C243 47nF MOD3
CN506 SCART_Y 5 5 CATS_DATA3 MOD4
2
2
5 CATS_DATA4 MOD5 GND
1 GND 1 CN507 5 CATS_DATA5 MOD6
2
2
1 1 5 CATS_DATA6
12pF
MOD7
5 CATS_DATA7
12pF
RX30
RX31
2 CVBSO_FIL 2 MOVAL
2 2 5 CATS_VALID MOSTRT
1
1
1
1
GND GND 5 CATS_FRAME
R171
R172
R173
R170
3 3 GND GND MCLKO
3 3 5 CATS_CLK
1
1
1
1
ESD-3P
ESD-3P
2
2
2
2
4 AV-LOUT 4 LINEO_L LINEO_R
4 4
2
2
2
2
75R
75R
75R
75R
5 5 D D
5 5
RX28
RX27
RX35
RX26
Q21 Q22
6 AV-ROUT 6 R594 1K G 2N7002 R595 1K G 2N7002
6 6 5 AV_REF 4 AUDIO_CTL
GND
8
7
7
8
C174 R165 S S
ESD-3P
ESD-3P
ESD-3P
ESD-3P
47nF 47R
8
7
7
8
GND
AV-JACK-3/AV
1
2
LINN OUTPL C191 R199
V_3.3V R198 10K GAIN0 5 24 0.22uF-0603 C192 D5 68K
GAIN0 PGND 2.2uF BAW70
R200 10K GAIN1 6 23 LOUT- Q8
1
10R-0402R202
10R-0402R202 GAIN1 OUTNL 3906 R201
3
VCC_AMP
7 22 C194 L26 33uH-2A 68K
C193 1uF-0603 AVCC BSNL 0.22uF-0603 R203 2 3
8 21 C195 0.22uF-0603 100R-0805
AGND BSNR L27 33uH-2A
R204
C196 1uF-0603 9 20 ROUT-
R205 GVDD OUTNR
10K C198
1
10K 10 19 2.2uF R206 3113
PLIMIT PGND C197 68K R201---68K
C199
C200 1uF-0603 11 18 0.22uF-0603 C202 R208 R212---0R
2
0.1uF(X7R)
C201 1uF-0603 RINN OUTPR 2.2uF 0R-0402
EC13
1
SPK-OUTR 1uF-0603 12 17 ROUT+ R207 1517
220uF/16V
5 SPK-OUTR RINP BSPR R201---6.8K
C203 C204 68K
13 16 0.22uF-0603 L28 33uH-2A 2 3 1 Q10 R212---4.7K
NC PVCCR VCC_AMP 3904
14 15 Q9
GND
PBTL PVCCR C205 3906
4.7uF/16V/X5R
29
R209
20K
MUTE_EN 1517_MUTE_EN
VCC_AMP V_12V
FB8
R212
56-4A-1206
0R-0402
echo gp060 > /dev/sisgpio
EC6 + echo gp061 > /dev/sisgpio R210 Q11
3
U12 220uF/16V
FOR 2X3W 68K 3904
NC/TPA1517 SPK_MUTE_N 1
4 SPK_MUTE_N
AR+ C207 NC/1uF SPK-OUTR R211
20 1 NC/68K
2
33P
GND/HS SGND
+ +
18 3 SVR
17 GND/HS SVRR 4 EC8 1 2 NC/470uF/16V ROUT+
GND/HS OUT1
+
16 5
15 GND/HS PGND 6 EC9 1 2 NC/470uF/16V LOUT+
14 GND/HS OUT2 7
13 GND/HS VCC 8 1517_MUTE_EN
12 GND/HS M/SB 9 AL+ C208 NC/1uF SPK-OUTL
11 GND/HS IN2 10
GND/HS GND/HS
4pin-2.54mm
ROUT+ 1
ROUT- 2 1
LOUT- 3 2
S4 LOUT+ 4 3
NC/HOT 4
CN6
1
2
R213
NC/0R-0805
R214
NC/0R-0805
2012-8-31
Only for 1517 C209 C210 Ўњ䖛EN55020⌟䆩
1000pF1000pF C209ǃC210⬅12PFᬍЎ1000PF