Professional Documents
Culture Documents
MMG series
side pocket mandrel.
MMG Series Side Pocket Mandrels
Engineering Data for MMG Series Side Pocket Mandrels
Test Pressure (Internal)‡ Test Pressure (External)‡
Tubing Size,† Major OD, Minor OD, Internal Drift, Kickover
Type† Normal Corrosive Normal Corrosive Latch Type
in [mm] in [mm] in [mm] in [mm] Tool§
Service Service Service Service
2.375 [60.3] MMG 4.673 [118.7] 4.000 [101.6] 1.901 [48.3] 7,500 [51,713] 6,000 [41,370] 6,000 [41,370] 5,000 [34,475] RK, RK-1, RKP OM, TP
2.875 [73.0] MMG 5.500 [139.7] 4.594 [116.7] 2.347 [59.6] 7,500 [51,713] 6,000 [41,370] 6,000 [41,370] 5,000 [34,475] RK, RK-1, RKP OM, TP
3.500 [88.9] MMG 5.968 [151.6] 5.000 [127.0] 2.867 [72.8] 8,000 [55,160] 7,000 [48,265] 6,500 [44,818] 5,500 [37,923] RK, RK-1, RKP OM, TP
3.500 [88.9] MMG-2 5.750 [146.1] 5.000 [127.0] 2.867 [72.8] 6,000 [41,370] 5,000 [34,475] 4,000 [27,580] 3,000 [27,580] RK, RK-1, RKP OM, TP
4.500 [114.3] MMG 7.031 [178.6] 5.625 [142.9] 3.833 [97.4] 7,500 [51,713] 6,000 [41,370] 6,000 [41,370] 5,000 [34,475] RK, RK-1, RKP OM, TP
4.500 [114.3] MMG-LTS 7.594 [192.9] na†† 3.833 [97.4] 7,500 [51,713] 6,000 [41,370] 6,000 [41,370] 5,000 [34,475] RK, RK-1, RKP OM, TP
5.000 [127.0] MMG 7.962 [202.2] 6.812 [173.0] 4.283 [108.8] na 6,500 [44,818] na 5,500 [37,923] RK, RK-1, RKP OM, TP
5.500 [139.7] MMG 7.962 [202.2] 6.812 [173.0] 4.653 [118.2] 8,500 [58,607] 6,500 [44,818] 7,000 [48,265] 5,500 [37,923] RK, RK-1, RKP OM, TP
†Additional sizes and pressure ratings are available upon request.
‡Test pressures listed are all for low-alloy steel, heat treated for normal or corrosive conditions. These pressures may be reduced because of end connection limitations.
§Use a spacer bar with the pulling tool and all OM series kickover tools.
††Not applicable
slb.com/gaslift
*Mark of Schlumberger
Other company, product, and service names
are the properties of their respective owners.
Copyright © 2015 Schlumberger. All rights reserved. 15-AL-67259