Professional Documents
Culture Documents
Technical Glass Products Architectural Specification Manual: Patent No. 9,045,900
Technical Glass Products Architectural Specification Manual: Patent No. 9,045,900
9,045,900
800.426.0279 | fireglass.com
Patent No. 9,045,900
Fireframes® Aluminum Series combined with Pilkington Pyrostop® fire-rated glass; provides a barrier to radiant
and conductive heat transfer, allowing for unlimited areas of glazing in fire separations. The patented, high
strength steel sub-frame assembly is only 2” (50.8mm) wide, yet has the strength for tall spans. The aluminum
cover system gives the ultimate in durability and flexibility with many anodizing and coating options available.
Fireframes Aluminum Series may incorporate Fireframes Designer Series doors or Fireframes Heat Barrier Series
doors, and are classified and labeled with Underwriters’ Laboratories, Inc.® (UL) and Underwriters’ Laboratories
of Canada (ULC).
Office: 800.426.0279
425.396.8200
Fax: 425.396.8300
E-mail: sales@fireglass.com
Web: fireglass.com
© May 2020 Technical Glass Products. Pilkington Pyrostop is a registered trademark of Pilkington PLC. Technical Glass Products, Fireframes, Fireglass and
One Source. Many Solutions. are registered trademarks of Technical Glass Products. This information is intended for general reference only.
Table of Contents
General Information
This document is meant as a general description of typical installations. As such, it is the responsibility of the
installer to ensure the window and doors are installed per the conditions that exist on any given project in
accordance with these instructions and project drawings. TGP project drawings may detail modifications to the
surrounding conditions required for a given project, (if architectural details or sketches were provided to TGP)
and should be used in conjunction with these instructions. In the event of any conflict between these
instructions and TGP project drawings, the TGP project drawings shall govern. TGP does not accept any warranty
and / or liability for installations not in compliance with this document or other non-conforming use of the TGP
products and / or system. Contact TGP with questions concerning these details as they apply to the particulars of
a given project.
FEATURES
LISTINGS
• Classified and labeled by Underwriters Laboratories, Inc.® (UL) as Design Number U558 and Underwriters
Laboratories of Canada (ULC) as U416.
• Test report number for labeled 45/60/120 minute fire-rated frame assemblies is UL File No. R-19207.
• Frame tested in accordance with UL 263, ASTM E119, for 60 and 120 minute ratings; CAN/ULC-S101, CAN4
S-106, NFPA 251, NFPA 257, UL 9, and UL 10C.
• Fireframes Designer Series and Fireframes Heat Barrier Series doors tested in accordance with UL 10B and
UL 10C.
• Approved for use in Los Angeles – LARR 25798.
General Information
SIZING GUIDELINES
FRAME ASSEMBLY
Rating Maximum Width Maximum Height Maximum Exposed Area
inches mm inches mm sq. ft. sq. m
Window Assembly 162 4,115 162 4,115 152 14.12
Wall Assembly N/A N/A N/A N/A N/A N/A
GLASS SIZES
Maximum Single Dimension Maximum Exposed Area
Product Rating (Minutes)
inches mm sq. in. sq. m
45 95-1/4 2,419 4,500 2.90
60 (23 mm) 96 2,438 5,616 3.62
Pilkington Pyrostop®
60 (26 mm and thicker) 118-1/8 3,000 7,442 4.80
120 111 2,819 3,730 2.41
Conventional fire-rated wood or hollow metal doors can also be installed into a Fireframes Designer Series door
frame within the narrow profiled Fireframes Aluminum Series frame, but will require coordination with respect
to preparation of door hardware. Prior to producing your shop drawings, TGP will need to evaluate relevant
hardware schedule information. When ordering wood or hollow metal doors, you must supply our engineering
staff with the manufacturer, model number, fabrication templates, door handing and, if required, physical
samples. If TGP must prepare special fabrication drawings to accommodate your hardware needs, your project
lead time may be extended.
Please consult your Technical Glass Products sales representative to determine the best option for your
application.
General Information
GLAZING SPECIFICATIONS
Pilkington Pyrostop® fire resistant glass provides up to a two hour fire rating. It can also be combined with other
glazing products to achieve nearly any level of security protection.
The Fireframes Aluminum Series framing system is available for 45 minute fire-rated windows and 60 or 120
minute transparent glass wall applications. Wall applications are UL rated as per UL263 / ASTM E119 and allow
for large expanses of glass and frame. The 45 minute window systems are classified as an Opening Protective as
per UL 9, ASTM E2010 with a maximum overall frame size of 152 square feet.
General Information
GLAZING SPECIFICATIONS
Pilkington Pyrostop® 45-200 (Interior Application Shown) Pilkington Pyrostop® 45-360 (Exterior Application Shown)
Pilkington Pyrostop® 60-101 (Interior Application Shown) Pilkington Pyrostop® 60-201 (Interior Application Shown)
Pilkington Pyrostop® 60-361 (Exterior Application Shown) Pilkington Pyrostop® 120-106 (Interior Application Shown)
General Information
ANGLE SEGMENTED FRAMES (INTERIOR APPLICATION ONLY)
The horizontals and glass can be angled up to a maximum of 6 degrees on either side of the shared vertical
mullion. See Figures 3 and 4.
Recommended Guidelines
1. REVIEW CONTRACT DOCUMENTS
Review architectural drawings, specifications, and approved TGP project drawings, installation instructions, and
shipping lists to become thoroughly familiar with the project. The TGP project drawings take precedence and include
specific details for your installation. These installation instructions are of a general nature and cover most conditions.
2. BUILDING CODES
Due to the diversity in local, state / provincial, or federal laws and the codes that govern design and application of
architectural products, it is the responsibility of the individual architect / owner and installer to ensure that products
selected for use on projects comply with all the applicable building codes and laws. Technical Glass Products
exercises no control over the use or application of its products, glazing materials, and operating hardware and
assumes no responsibility thereof. Compliance of TGP project drawings with applicable codes for a given project shall
be the responsibility of the Buyer.
4. INSTALLATION
All materials are to be installed plumb and level.
5. BENCH MARKS
All work should start from bench marks and/or column lines as established by the architectural drawings and the
general contractor with guaranteed accuracy. Using these datum points and lines, determine:
a. The plane of the wall in reference to offset lines provided on each floor;
b. The finish floor lines in reference to bench marks on the outer building columns; and
c. Mullion spacing from both ends of openings to prevent dimensional build-up of daylight opening.
6. SURROUNDING CONDITIONS
a. Coordination of adjacent material and construction tolerances to TGP’s systems may be facilitated by TGP
as part of preparing project drawings, and these drawings may indicate acceptable tolerances for critical
dimensions. The installer should verify that surrounding construction is in accordance with the approved
project drawings. Do not accept rough opening dimensions less than shown on project drawings. It is
assumed that the minimal joint dimensions shown on the TGP project drawings match the field conditions.
A frame may fit within a given opening but sealants may not perform as detailed if a smaller sealant joint is
installed. Expansion / contraction issues may also be compromised. IF THE JOINTS ARE SMALLER THAN
THAT SHOWN ON THE TGP PROJECT DRAWINGS, DO NOT PROCEED. Notify the General Contractor that the
conditions are not as detailed and wait for corrective work to be completed before starting this work.
Recommended Guidelines
b. The installer MUST notify and receive approval from TGP and the general contractor when conditions are
not in accordance with approved project drawings and/or change any aspect of the structural performance
of the Fireframes series before making any modifications to the TGP-furnished material or making changes
which are different from those shown on the TGP project drawings. These conditions include, but are not
limited to, anchor placement/location, changes in adjacent materials the anchor is being connected to or
changes to dimensional relationships between framing, anchors and connection to adjacent materials.
c. TGP must review and approve any changes required prior to the subcontractor installing any “corrective”
work. These reviews may incur additional charges, which must be approved by the TGP customer prior to
TGP’s review.
8. FASTENING
Within the body of these instructions, “fastening” means any method of securing one part to another or to adjacent
materials by means other than welding, adhering or using a mechanical fastener as shown on the approved details.
Only those fasteners used within the system are specified in these instructions. Due to the varying perimeter
conditions and performance requirements, perimeter and anchor fasteners are not specified in these instructions
and are the responsibility of the installer.
9. SEALANTS
a. Sealants must be compatible with all materials they are in contact with, including other sealant surfaces.
Consult with sealant manufacturer for recommendations relative to joint size, shelf life, compatibility,
cleaning/priming, tooling, adhesion, etc.
b. The chemical compatibility and/or adhesion of all glazing materials and framing sealants with each other
and with like materials used in glass and frame fabrication must be established by the installer. This is
required on every project.
c. If required by the project specifications, it is the responsibility of the glazing contractor to submit any
documentation or samples from the sealant manufacturer indicating that glass and glazing material has
been tested for chemical compatibility and / or adhesion with glazing sealants. This applies to all TGP
materials in contact with any sealant. TGP will furnish samples of these materials upon request.
d. The implementation of the test results is the responsibility of the installing contractor, and includes
material performance and recommendations for primers and substrate preparation required to obtain
adhesion.
Recommended Guidelines
11. CLAMPING SCREW TORQUE
Edge pressure must not exceed 11.5 pounds per linear inch. This pressure is required on the Fireframes Aluminum
Series mullion gaskets. It must be uniformly applied by the exterior mounted pressure plate, through the glass, to the
mullion gaskets. Excessive or irregular edge pressure WILL CAUSE deformation and breakage.
4 5
9 10
2 7
WINDOW
A 45 MINUTE FIRE-RATED
* 45 minute window systems are classified as an Opening Protective as per UL 9, with the maximum width or
height dimension of 162”, while not exceeding 152 square feet.
** 60 and 120-minute tests conducted per UL 263 / ASTM E-119. Therefore assembly is classified as a wall
assembly, and not subject to “opening” area limitations.
3 " [9.5]
ANCHOR BOLT
(BY OTHERS)
8
ANCHOR SEALANT AND BACKER
ROD (BY OTHERS)
MINERAL WOOL (BY OTHERS)
ROUGH OPENING (RO)
CONNECTING BRACE
HARDWOOD SPACER INTUMESCENT
(DLO)
4" [101.5]
FACE OF VERTICAL
FACE OF VERTICAL
A-SIDE B-SIDE
41 4" [107.7]
COVER CAP
COVER CAP
EXTERIOR INTERIOR
HEAD SECTION
1 INTERIOR APPLICATION
FIRE-RATED GLASS
(DLO)
INTUMESCENT TAPE
FRAME DIMENSION (FD)
ROUGH OPENING (RO)
SETTING PAD
M6 BHSC SCREW
2" [50.8]
HORIZONTAL MULLION
HORIZONTAL COVER CAP
GASKET
(DLO)
(DLO)
DIMENSION (FD)
HARDWOOD SPACER
EXTENDS FULLY IN CAVITY
ANCHOR
(NOT SHOWN FOR CLARITY)
ANCHOR BOLT SEALANT AND BACKER
(BY OTHERS) ROD (BY OTHERS)
3 " [9.5]
SILL SECTION
3 INTERIOR APPLICATION
8
(BY OTHERS)
FACE OF HORIZONTAL COVER CAP
M6 BHSC SCREW
GASKET
[44.4]
13 4"
MOMENT BRACE
41 4" [107.7]
4" [19]
HARDWOOD SPACER
INTUMESCENT TAPE
[44.4] 3
FIRE-RATED GLASS
VERTICAL MULLION
13 4"
VERTICAL COVER CAP
FACE OF HORIZONTAL COVER CAP
A-SIDE
JAMB SECTION
4 INTERIOR APPLICATION
B-SIDE
MOMENT BRACE
[44.4]
13 4"
GASKET
41 4" [107.7]
3 " [19]
4
FIRE-RATED GLASS
[44.4]
13 4"
M6 BHSC SCREW
VERTICAL MULLION
FACE OF HORIZONTAL COVER CAP
VERTICAL COVER CAP
A-SIDE
2"
(DLO) (DLO)
[50.8]
3 " [9.5]
ANCHOR BOLT ANCHOR GASKET
(BY OTHERS)
8 ANCHOR
SEALANT AND BACKER
ROD (BY OTHERS)
HARDWOOD SPACER
DIMENSION (FD)
2"
TO BACK OF DIVERTER
M6 BHSC SCREW (NOT SHOWN FOR CLARITY)
FRAME
VARIES
FACE OF VERTICAL
FACE OF VERTICAL
COVER CAP
COVER CAP
HEAD SECTION
6 EXTERIOR APPLICATION
(DLO)
FIRE-RATED GLASS
SETTING PAD
FRAME DIMENSION (FD)
ROUGH OPENING (RO)
INTUMESCENT TAPE
2" [50.8]
M6 BHSC SCREW
HORIZONTAL MULLION
HORIZONTAL COVER CAP
GASKET
(DLO)
(DLO)
DIMENSION (FD)
TO BACK OF DIVERTER
SEALED TO SURROUND
(NOT SHOWN FOR CLARITY)
ANCHOR SEALANT AND BACKER
ROD (BY OTHERS)
3 " [9.5]
ANCHOR BOLT
ANCHOR GASKET
(BY OTHERS) SILL SECTION
8
8 EXTERIOR APPLICATION
[44.4]
GASKET WITH DIVERTER
13 4"
MINERAL WOOL
15 16"
[33]
MOMENT BRACE
HARDWOOD SPACER
FIRE-RATED GLASS
[47.4]
GASKET
17 8"
INTUMESCENT TAPE
VERTICAL MULLION FACE OF HORIZONTAL COVER CAP
A-SIDE
VERTICAL COVER CAP
3 " [9.5] 2"
8 (DLO)
[50.8]
JAMB SECTION
9 EXTERIOR APPLICATION
B-SIDE
113 16"
[45.9]
GASKET
FIRE-RATED GLASS
113 16"
[45.9]
M6 BHSC SCREW
VERTICAL MULLION
VERTICAL COVER CAP FACE OF HORIZONTAL COVER CAP
A-SIDE
11 49 52
14 15
54 55 11 49
12 50
14 15 15
54 55 55
17 21 57 61 69 12 50
18 19
22 23
36 37
58 59
62 63
70 71 12 50
13 51 13 51
11 49
14 15
54 55
24 40 64 72 25 41 65 73
44 76 12 50
45 46
26 27
77 78
42 43
66 67
74 75
13 51
WINDOW AND DOOR BY OTHERS WITH DESIGNER SERIES FRAME DOUBLE EGRESS DOOR
D 60 AND 120 MINUTE FIRE-RATED
E 60 AND 120 MINUTE FIRE-RATED
NOTE: Fireframes Designer Series temperature rise doors cannot have mid rails.
16 20 34 56 60 68 11 49
28
29
18 31
22 32
36 38 12 50
58
62
70
13 51
11 49
14 15 15
54 55 55
12 50 17 21 35 57 61 69 12 50
30
33
39
12 50
13 51
NOTE: Fireframes Designer Series temperature rise doors cannot have mid rails.
3 " [9.5]
ANCHOR BOLT
(BY OTHERS)
8
ANCHOR SEALANT AND BACKER
ROD (BY OTHERS)
MINERAL WOOL (BY OTHERS) HORIZONTAL MULLION
ROUGH OPENING (RO)
[50.8]
EXTENDS FULLY IN CAVITY
2"
M6 BHSC SCREW
FIRE-RATED GLASS GASKET
FACE OF VERTICAL
COVER CAP VARIES
COVER CAP
A-SIDE HEAD SECTION B-SIDE
11 INTERIOR APPLICATION
EXTERIOR INTERIOR
FIRE-RATED GLASS
(DLO)
INTUMESCENT TAPE
FRAME DIMENSION (FD)
ROUGH OPENING (RO)
SETTING PAD
M6 BHSC SCREW
[50.8]
HORIZONTAL MULLION
2"
(DLO)
DIMENSION (FD)
SILL SECTION
8
13 INTERIOR APPLICATION
NOTE: 60 minute fire rating shown in the details above. 120 minute fire rating will have IGU glass; see Glazing Specifications section.
1 " [3.1]
MINERAL WOOL
B-SIDE
(BY OTHERS)
8
FACE OF HORIZONTAL COVER CAP
M6 BHSC SCREW
GASKET
MOMENT BRACE
VARIES
HARDWOOD SPACER
INTUMESCENT TAPE
VARIES
FIRE-RATED GLASS
VERTICAL MULLION
VERTICAL COVER CAP
FACE OF HORIZONTAL COVER CAP
1 " [3.1]
A-SIDE
8
8 [50.8]
JAMB SECTION
14 INTERIOR APPLICATION
B-SIDE
MOMENT BRACE
GASKET
VARIES
FIRE-RATED GLASS
VARIES
M6 BHSC SCREW
VERTICAL MULLION
FACE OF HORIZONTAL COVER CAP
A-SIDE
2"
(DLO) (DLO)
[50.8]
NOTE: 60 minute fire rating shown in the details above. 120 minute fire rating will have IGU glass; see Glazing Specifications section.
HARDWOOD SPACER
2"
115 16"
[50]
CONNECTING BRACE
8
DOOR ADAPTOR
FRAME DIMENSION (FD)
GLAZING TAPE
(BY OTHERS)
DOOR OPENING (DO)
FIRE-RATED GLASS
(DLO)
A-SIDE B-SIDE
PULL PUSH
SIDE SIDE
FIRE-RATED GLASS
(DLO)
GLAZING TAPE
(BY OTHERS)
FRAME DIMENSION (FD)
ROUGH OPENING (RO)
SETTING PAD
DOOR OPENING (DO)
FACE OF VERTICAL
FACE OF VERTICAL
COVER CAP
39 16" [90]
COVER CAP
(DLO)
FIRE-RATED GLASS
(DLO)
GLAZING TAPE
(BY OTHERS)
FRAME DIMENSION (FD)
ROUGH OPENING (RO)
SETTING PAD
SMOKE SEAL
39 16" [90]
1 " [13]
2
M6 BHSC SCREW
1 " [3]
2"
DOOR ADAPTOR
8
CLOSER
FRAME DIMENSION (FD)
ROUGH OPENING (RO)
16"
[50]
115
DOOR OPENING (DO)
GLAZING TAPE
(BY OTHERS)
FIRE-RATED GLASS
(DLO)
A-SIDE B-SIDE
PULL PUSH
SECURE EGRESS
SIDE SIDE
VARIES
FIRE-RATED GLASS
(DLO)
GLAZING TAPE
(BY OTHERS)
FRAME DIMENSION (FD)
ROUGH OPENING (RO)
SETTING PAD
DOOR OPENING (DO)
FACE OF VERTICAL
FACE OF VERTICAL
COVER CAP
39 16" [90]
COVER CAP
(DLO)
FIRE-RATED GLASS
(DLO)
GLAZING TAPE
(BY OTHERS)
FRAME DIMENSION (FD)
ROUGH OPENING (RO)
SETTING PAD
SMOKE SEAL
16" [90]
39
1 " [13]
2
DOOR HEADER WITH TRANSOM, DOOR MID RAIL, AND BOTTOM RAIL
17 DESIGNER SERIES FRAME
DOOR ADAPTOR
EXIT DEVICE
B-SIDE
VERTICAL COVER CAP
PUSH
SIDE
EGRESS
M6 BHSC SCREW
SIDE
MOMENT BRACE
VARIES
115 16" [50]
VARIES
FIRE-RATED GLASS
A-SIDE
PULL GASKET
GLAZING TAPE SIDE
(BY OTHERS) SECURE
INTUMESCENT TAPE
SIDE
M6 BHSC SCREW
(DLO) 115 16" 2"
31 8" [80] (DLO)
[50] [50.8]
HARDWOOD SPACER
2"
115 16"
[50]
CONNECTING BRACE
8
DOOR ADAPTOR
FRAME DIMENSION (FD)
GLAZING TAPE
(BY OTHERS)
DOOR OPENING (DO)
FIRE-RATED GLASS
(DLO)
FACE OF VERTICAL
COVER CAP
PULL PUSH
SIDE SIDE
VARIES
FIRE-RATED GLASS
(DLO)
GLAZING TAPE
(BY OTHERS)
FRAME DIMENSION (FD)
ROUGH OPENING (RO)
SETTING PAD
SMOKE SEAL
39 16" [90]
1 " [13]
2
M6 BHSC SCREW
1 " [3]
2"
DOOR ADAPTOR
8
CLOSER
FRAME DIMENSION (FD)
ROUGH OPENING (RO)
16"
[50]
115 DOOR OPENING (DO)
GLAZING TAPE
(BY OTHERS)
FIRE-RATED GLASS
(DLO)
FACE OF VERTICAL
FACE OF VERTICAL
COVER CAP
A-SIDE B-SIDE
SECURE EGRESS
SIDE SIDE
VARIES
FIRE-RATED GLASS
(DLO)
GLAZING TAPE
(BY OTHERS)
FRAME DIMENSION (FD)
ROUGH OPENING (RO)
SETTING PAD
SMOKE SEAL
39 16" [90]
1 " [13]
2
DOOR HEADER WITH TRANSOM, DOOR MID RAIL, AND BOTTOM RAIL
21 DESIGNER SERIES FRAME (TEMPERATURE RISE)
DOOR ADAPTOR
EXIT DEVICE
B-SIDE
VERTICAL COVER CAP
PUSH
SIDE
EGRESS
M6 BHSC SCREW
SIDE
MOMENT BRACE
VARIES
115 16" [50]
VARIES
FIRE-RATED GLASS
A-SIDE
PULL GASKET
GLAZING TAPE SIDE
(BY OTHERS) SECURE
INTUMESCENT TAPE
SIDE
M6 BHSC SCREW
(DLO) 115 16" 2"
31 8" [80] (DLO)
[50] [50.8]
ANCHOR BOLT
8
HARDWOOD SPACER
2"
HORIZONTAL MULLION
8
CONNECTING BRACE
FRAME DIMENSION (FD)
DOOR ADAPTOR
GLAZING TAPE
DOOR OPENING (DO)
(BY OTHERS)
FIRE-RATED GLASS
FACE OF VERTICAL
FACE OF VERTICAL
(DLO)
COVER CAP
COVER CAP
115 16" [50]
VARIES
DOUBLE EGRESS DOOR HEADER
24 DESIGNER SERIES FRAME
[9.5]
ANCHOR BOLT
8
HORIZONTAL MULLION
8
CONNECTING BRACE
FRAME DIMENSION (FD)
DOOR ADAPTOR
CLOSER
DOOR OPENING (DO)
GLAZING TAPE
(BY OTHERS)
FIRE-RATED GLASS
FACE OF VERTICAL
FACE OF VERTICAL
(DLO)
COVER CAP
COVER CAP
VARIES
DOUBLE EGRESS DOOR HEADER
25 DESIGNER SERIES FRAME
EXIT DEVICE
LEVER
GLAZING BEAD
BEAD LOCK SCREW
FIRE-RATED GLASS
115 16" [50]
LEVER
(DLO) 57 8" [150] (DLO)
GLAZING BEAD
BEAD STUD
INTERIOR
BEAD LOCK SCREW
2" [50]
EXTERIOR
FIRE-RATED GLASS
GLAZING TAPE
WEATHERSTRIPPING
LEVERS SEAL
LEVERS
(DLO) 6" [152] (DLO)
115 16"
[50]
A-SIDE
PULL
SIDE
SECURE
SIDE
GLAZING BEAD
GLAZING BEAD CLIP
INTERIOR
STAINLESS RIVET
2" [50]
WEATHERSTRIPPING
LEVERS SEAL
LEVERS
(DLO) 6" [152] (DLO)
LEVER
ACTIVE DOOR PANEL
B-SIDE
FIXED DOOR PANEL
PUSH
SIDE
GLAZING TAPE
(BY OTHERS)
EGRESS
SIDE
FIRE-RATED GLASS
115 16"
[50]
A-SIDE
PULL
SIDE
SECURE
SIDE
HARDWOOD SPACER
2"
23 16"
CONNECTING BRACE
[55]
8
DOOR ADAPTOR
FRAME DIMENSION (FD)
INTUMESCENT TAPE
GLAZING TAPE
DOOR OPENING (DO)
(BY OTHERS)
FIRE-RATED GLASS
(DLO)
A-SIDE B-SIDE
PULL PUSH
SIDE SIDE
29 16" [65]
SECURE EGRESS
SIDE SIDE
VARIES
FIRE-RATED GLASS
(DLO)
GLAZING TAPE
(BY OTHERS)
INTUMESCENT TAPE
FACE OF VERTICAL
SETTING PAD
COVER CAP
41 8" [105]
FACE OF VERTICAL
COVER CAP
FRAME DIMENSION (FD)
ROUGH OPENING (RO)
(DLO)
FIRE-RATED GLASS
GLAZING TAPE
(BY OTHERS)
INTUMESCENT TAPE
SETTING PAD
41 8" [105]
SMOKE SEAL
1 " [13]
2
NOTE: 1. 60 minute fire rating shown in the details above. 120 minute fire rating will have IGU glass; see Glazing Specifications section.
2. Door adaptor is centered for 19-40 mm glass sizes. Door adaptor is offset for 41-71 mm glass sizes.
M6 BHSC SCREW
DOOR ADAPTOR
CLOSER
FRAME DIMENSION (FD)
INTUMESCENT TAPE
ROUGH OPENING (RO)
GLAZING TAPE
23 16"
[55]
(BY OTHERS)
FIRE-RATED GLASS
DOOR OPENING (DO)
(DLO)
A-SIDE B-SIDE
PULL PUSH
29 16" [65]
SIDE SIDE
SECURE EGRESS
SIDE VARIES SIDE
FIRE-RATED GLASS
(DLO)
GLAZING TAPE
(BY OTHERS)
INTUMESCENT TAPE
FACE OF VERTICAL
SETTING PAD
COVER CAP
41 8" [105]
FACE OF VERTICAL
COVER CAP
FRAME DIMENSION (FD)
ROUGH OPENING (RO)
(DLO)
FIRE-RATED GLASS
GLAZING TAPE
(BY OTHERS)
INTUMESCENT TAPE
SETTING PAD
41 8" [105]
SMOKE SEAL
1 " [13]
2
DOOR HEADER WITH TRANSOM, DOOR MID RAIL, AND BOTTOM RAIL
35 HEAT BARRIER SERIES FRAME
NOTE: 1. 60 minute fire rating shown in the details above. 120 minute fire rating will have IGU glass; see Glazing Specifications section.
2. Door adaptor is centered for 19-40 mm glass sizes. Door adaptor is offset for 41-71 mm glass sizes.
HARDWOOD SPACER
MOMENT BRACE
29 16" [65]
GASKET
M6 BHSC SCREW
SEALANT AND BACKER
ROD (BY OTHERS)
A-SIDE
DOOR ADAPTOR
VARIES
FIRE-RATED GLASS
NOTE: 1. 60 minute fire rating shown in the details above. 120 minute fire rating will have IGU glass; see Glazing Specifications section.
2. Door adaptor is centered for 19-40 mm glass sizes. Door adaptor is offset for 41-71 mm glass sizes.
29 16"
[65]
A-SIDE
LEVER
PULL
SIDE
SECURE
SIDE
LEVER
ACTIVE DOOR PANEL
B-SIDE FIXED DOOR PANEL
PUSH INTUMESCENT TAPE
SIDE
GLASS
A-SIDE
PULL
SIDE
SECURE
SIDE
HARDWOOD SPACER
2"
23 16" [55]
HORIZONTAL MULLION
ROUGH OPENING (RO)
8
CONNECTING BRACE
FRAME DIMENSION (FD)
DOOR ADAPTOR
INTUMESCENT TAPE
DOOR OPENING (DO)
GLAZING TAPE
(BY OTHERS)
FIRE-RATED GLASS
FACE OF VERTICAL
FACE OF VERTICAL
(DLO)
COVER CAP
COVER CAP
29 16" [65]
VARIES
HARDWOOD SPACER
2"
16" [55]
HORIZONTAL MULLION
ROUGH OPENING (RO)
8
CONNECTING BRACE
23
DOOR ADAPTOR
FRAME DIMENSION (FD)
CLOSER
GLAZING TAPE
DOOR OPENING (DO)
(BY OTHERS)
FIRE-RATED GLASS
FACE OF VERTICAL
FACE OF VERTICAL
(DLO)
COVER CAP
COVER CAP
29 16" [65]
VARIES
HARDWOOD SPACER
MOMENT BRACE
29 16" [65]
GASKET
M6 BHSC SCREW
VERTICAL MULLION
VERTICAL COVER CAP
A-SIDE
FIRE-RATED GLASS
3 "
8 2" 23 16" 31116" [94] (DLO)
[9.5] [50.8] [55]
1 " [3] DOOR OPENING (DO)
8
LEVER
60 and 120 Minute – Fireframes Designer Series Frame with Door By Others
Interior Application
VARIES
VARIES
13 4" [44.4] 13 4" [44.4]
DOOR ADAPTOR
HORIZONTAL MULLION
1 " [3]
PULL PUSH
SIDE SIDE
DOOR PANEL
SECURE EGRESS
SIDE SIDE
1 " [13]
2
NOTE: 1. 60 minute fire rating shown in the details above. 120 minute fire rating will have IGU glass; see Glazing Specifications section.
2. Door adaptor is centered for 19-40 mm glass sizes. Door adaptor is offset for 41-71 mm glass sizes.
60 and 120 Minute – Fireframes Designer Series Frame with Door By Others
Interior Application
B-SIDE
SEALANT AND BACKER DOOR ADAPTOR
ROD (BY OTHERS) PUSH
SIDE
M6 BHSC SCREW EGRESS
SIDE
MINERAL WOOL
(BY OTHERS)
HARDWOOD SPACER
115 16"
[50]
MOMENT BRACE
GASKET
M6 BHSC SCREW
1-3/4" DOOR (BY OTHERS)
VERTICAL MULLION A-SIDE
PIVOT (BY OTHERS)
PULL
VERTICAL COVER CAP
115 16"
SIDE
3 " [9.5] 2"
8 DOOR OPENING (DO)
[50.8] [50] SECURE
SIDE
1 " [3]
8
FRAME DIMENSION (FD)
DOOR ADAPTOR
B-SIDE VERTICAL COVER CAP
13 4" [44.4]
PUSH
SIDE
M6 BHSC SCREW
EGRESS
SIDE MOMENT BRACE
VARIES
115 16"
[50]
VARIES
13 4" [44.4]
FIRE-RATED GLASS
A-SIDE
PULL GASKET
SIDE
ROUGH OPENING
VERTICAL MULLION WITH OUTSWING DOOR BY OTHERS AT LOCKING JAMB
46 DESIGNER SERIES FRAME
NOTE: 1. 60 minute fire rating shown in the details above. 120 minute fire rating will have IGU glass; see Glazing Specifications section.
2. Door adaptor is centered for 19-40 mm glass sizes. Door adaptor is offset for 41-71 mm glass sizes.
FACE OF HORIZONTAL
FACE OF HORIZONTAL
M6 BHSC SCREW
COVER CAP
COVER CAP
MOMENT BRACE
(DLO)
GASKET
INTUMESCENT TAPE
2" [50.8]
B-SIDE
FACE OF HORIZONTAL
[41.3]
COVER CAP
15 8"
41 4" [108.6]
43 8" [111.7]
(VARIES)
(VARIES)
VARIES
1 " [3.1]
[41.3]
15 8"
FACE OF HORIZONTAL 8
COVER CAP
FIRE-RATED
A-SIDE INSULATION
NOTE: 1. 60 minute fire rating shown in the detail above. 120 minute fire rating will have IGU glass; see Glazing Specifications section.
L
P TA
VERTICAL MULLION
CA N
R IZO
VE OR
M6 BHSC SCREW FIRE-RATED GLASS
CO F H
O
MOMENT BRACE
CE
FA
GASKET
L
P TA
CA N
R IZO
VE OR
B-SIDE
CO F H
O
CE
FA
FACE OF HORIZONTAL
[44.4]
COVER CAP
13 4"
)
43 8" [111.7]
LO
(VARIES)
(D
VARIES
[5 0 2 "
.8]
[44.4]
13 4"
FACE OF HORIZONTAL
COVER CAP
ES
1]
NOT
SEE S
[
RI
1 " [3.1]
16 "
VA
A-SIDE
1
E
8
2"
(DLO) VARIES .050 ALUMINUM 5052-H32 TRIM
[50.8]
1 " [1] CLADDING, FINISH TO MATCH FRAME,
16
ADHERED WITH SUPPLIED 3M VHB TAPE
NOTE: 1. 60 minute fire rating shown in the detail above. 120 minute fire rating will have IGU glass; see Glazing Specifications section.
3 " [9.5]
ANCHOR BOLT ANCHOR GASKET
8 (BY OTHERS)
SEALANT AND BACKER
ANCHOR ROD (BY OTHERS)
MINERAL WOOL (BY OTHERS)
SEALED TO SURROUND
ROUGH OPENING (RO)
FACE OF VERTICAL
VARIES
COVER CAP
COVER CAP
HEAD SECTION
A-SIDE 49 EXTERIOR APPLICATION
B-SIDE
EXTERIOR INTERIOR
(DLO)
FIRE-RATED GLASS
SETTING PAD
FRAME DIMENSION (FD)
ROUGH OPENING (RO)
INTUMESCENT TAPE
2" [50.8]
M6 BHSC SCREW
HORIZONTAL MULLION
HORIZONTAL COVER CAP
GASKET
(DLO)
(DLO)
DIMENSION (FD)
TO BACK OF DIVERTER
SEALED TO SURROUND
(NOT SHOWN FOR CLARITY)
ANCHOR SEALANT AND BACKER
ROD (BY OTHERS)
3 " [9.5]
ANCHOR BOLT
(BY OTHERS) SILL SECTION ANCHOR GASKET
51
8
EXTERIOR APPLICATION
3 " [9.5]
VARIES
FACE OF VERTICAL
FACE OF VERTICAL
HEAD SECTION
COVER CAP
COVER CAP
A-SIDE
52 EXTERIOR APPLICATION B-SIDE
EXTERIOR INTERIOR
(DLO)
DIMENSION (FD)
TO BACK OF DIVERTER
SEALED TO SURROUND
(NOT SHOWN FOR CLARITY)
ANCHOR SEALANT AND BACKER
ROD (BY OTHERS)
3 " [9.5]
ANCHOR BOLT
(BY OTHERS) ANCHOR GASKET
SILL SECTION
53
8
EXTERIOR APPLICATION
NOTE: 1. The anchors are flush with the notched portions of the gasket with diverter.
1 " [3.1]
SEALANT AND BACKER B-SIDE
8
ROD (BY OTHERS) FACE OF HORIZONTAL COVER CAP
M6 BHSC SCREW
GASKET WITH DIVERTER
MINERAL WOOL
(BY OTHERS)
VARIES
VARIES
MOMENT BRACE
HARDWOOD SPACER
GASKET FIRE-RATED GLASS
INTUMESCENT TAPE
FACE OF HORIZONTAL COVER CAP
VERTICAL MULLION
1 " [3.1]
A-SIDE
VERTICAL COVER CAP
3 " [9.5] 2"
(DLO)
8
8 [50.8]
JAMB SECTION
54 EXTERIOR APPLICATION
B-SIDE
GASKET VARIES
VARIES
FIRE-RATED GLASS
M6 BHSC SCREW
VERTICAL MULLION
FACE OF HORIZONTAL COVER CAP
VERTICAL COVER CAP
A-SIDE
HARDWOOD SPACER
2"
115 16"
[50]
8
HORIZONTAL MULLION
FRAME DIMENSION (FD)
CONNECTING BRACE
DOOR ADAPTOR
DOOR OPENING (DO)
GLAZING TAPE
(BY OTHERS)
FIRE-RATED GLASS
(DLO)
A-SIDE B-SIDE
PULL PUSH
SIDE SIDE
SECURE
115 16" EGRESS
SIDE [50] SIDE
VARIES
FIRE-RATED GLASS
(DLO)
GLAZING TAPE
(BY OTHERS)
FRAME DIMENSION (FD)
ROUGH OPENING (RO)
SETTING PAD
DOOR OPENING (DO)
FACE OF VERTICAL
FACE OF VERTICAL
COVER CAP
39 16" [90]
COVER CAP
(DLO)
FIRE-RATED GLASS
(DLO)
GLAZING TAPE
(BY OTHERS)
FRAME DIMENSION (FD)
ROUGH OPENING (RO)
SETTING PAD
SMOKE SEAL
3916" [90]
1 " [13]
2
M6 BHSC SCREW
1 " [3]
2"
DOOR ADAPTOR
8
CLOSER
FRAME DIMENSION (FD)
ROUGH OPENING (RO)
16"
[50]
115DOOR OPENING (DO)
GLAZING TAPE
(BY OTHERS)
FIRE-RATED GLASS
(DLO)
A-SIDE B-SIDE
PULL
SIDE
115 16"
PUSH
SIDE
[50]
SECURE EGRESS
SIDE
VARIES SIDE
FIRE-RATED GLASS
(DLO)
GLAZING TAPE
(BY OTHERS)
FRAME DIMENSION (FD)
ROUGH OPENING (RO)
SETTING PAD
DOOR OPENING (DO)
FACE OF VERTICAL
FACE OF VERTICAL
COVER CAP
39 16" [90]
COVER CAP
(DLO)
FIRE-RATED GLASS
(DLO)
GLAZING TAPE
(BY OTHERS)
FRAME DIMENSION (FD)
ROUGH OPENING (RO)
SETTING PAD
SMOKE SEAL
16" [90]
39
1 " [13]
2
DOOR HEADER WITH TRANSOM, DOOR MID RAIL, AND BOTTOM RAIL
57 DESIGNER SERIES FRAME
EGRESS
MINERAL WOOL SIDE
(BY OTHERS)
VARIES
VARIES
FIRE-RATED GLASS
A-SIDE
PULL
GASKET
GLAZING TAPE SIDE
(BY OTHERS) SECURE MOMENT BRACE
SIDE
INTUMESCENT TAPE
HARDWOOD SPACER
2"
115 16"
[50]
HORIZONTAL MULLION
8
CONNECTING BRACE
FRAME DIMENSION (FD)
DOOR ADAPTOR
DOOR OPENING (DO)
GLAZING TAPE
(BY OTHERS)
FIRE-RATED GLASS
(DLO)
FACE OF VERTICAL
FACE OF VERTICAL
A-SIDE B-SIDE
COVER CAP
COVER CAP
PULL PUSH
SIDE SIDE
SECURE
115 16" EGRESS
SIDE [50] SIDE
VARIES
FIRE-RATED GLASS
(DLO)
GLAZING TAPE
(BY OTHERS)
FRAME DIMENSION (FD)
ROUGH OPENING (RO)
SETTING PAD
SMOKE SEAL
3916" [90]
1 " [13]
2
VARIES
GASKET CONNECTING BRACE
(DLO)
M6 BHSC SCREW
1 " [3]
2"
DOOR ADAPTOR
8
CLOSER
FRAME DIMENSION (FD)
ROUGH OPENING (RO)
115 16"
[50]
DOOR OPENING (DO)
GLAZING TAPE
(BY OTHERS)
FIRE-RATED GLASS
(DLO)
FACE OF VERTICAL
FACE OF VERTICAL
COVER CAP
COVER CAP
A-SIDE B-SIDE
PULL PUSH
SIDE 115 16" SIDE
VARIES
FIRE-RATED GLASS
(DLO)
GLAZING TAPE
(BY OTHERS)
FRAME DIMENSION (FD)
ROUGH OPENING (RO)
SETTING PAD
SMOKE SEAL
16" [90]
39
1 " [13]
2
MOMENT BRACE
VARIES
VARIES
FIRE-RATED GLASS
A-SIDE
PULL
GASKET
GLAZING TAPE SIDE
(BY OTHERS) SECURE MOMENT BRACE
SIDE
INTUMESCENT TAPE
115 16"
[50]
HORIZONTAL MULLION
8
FRAME DIMENSION (FD)
CONNECTING BRACE
DOOR ADAPTOR
DOOR OPENING (DO)
GLAZING TAPE
(BY OTHERS)
FIRE-RATED GLASS
(DLO)
A-SIDE B-SIDE
PULL PUSH
SIDE
115 16" [50] SIDE
EGRESS
SIDE
VARIES
HARDWOOD SPACER
2"
M6 BHSC SCREW
8
HORIZONTAL MULLION
FRAME DIMENSION (FD)
CONNECTING BRACE
DOOR ADAPTOR
DOOR OPENING (DO)
CLOSER
GLAZING TAPE
(BY OTHERS)
FIRE-RATED GLASS
(DLO)
A-SIDE B-SIDE
PUSH PULL
SIDE
115 16" [50] SIDE
EGRESS
SIDE
VARIES
EGRESS
GASKET WITH DIVERTER SIDE
MINERAL WOOL
EXIT DEVICE
LEVER
GLAZING BEAD
BEAD LOCK SCREW
FIRE-RATED GLASS
115 16" [50]
LEVER
(DLO) 57 8" [150] (DLO)
HARDWOOD SPACER
2"
23 16"
[55]
8
HORIZONTAL MULLION
CONNECTING BRACE
FRAME DIMENSION (FD)
DOOR ADAPTOR
INTUMESCENT TAPE
DOOR OPENING (DO)
GLAZING TAPE
(BY OTHERS)
FIRE-RATED GLASS
(DLO)
A-SIDE B-SIDE
PULL PUSH
SIDE SIDE
VARIES
FIRE-RATED GLASS
(DLO)
GLAZING TAPE
(BY OTHERS)
INTUMESCENT TAPE
FACE OF VERTICAL
SETTING PAD
COVER CAP
41 8" [105]
FACE OF VERTICAL
COVER CAP
FRAME DIMENSION (FD)
ROUGH OPENING (RO)
FIRE-RATED GLASS
GLAZING TAPE
(BY OTHERS)
INTUMESCENT TAPE
SETTING PAD
41 8" [105]
SMOKE SEAL
1 " [13]
2
NOTE: 1. Door adaptor is centered for 19-40 mm glass sizes. Door adaptor is offset for 41-71 mm glass sizes.
M6 BHSC SCREW
1 " [3]
2"
DOOR ADAPTOR
8
FRAME DIMENSION (FD)
GLAZING TAPE
16"
[55]
(BY OTHERS)
23
FIRE-RATED GLASS
DOOR OPENING (DO)
(DLO)
A-SIDE B-SIDE
PULL PUSH
29 16" [65]
SIDE SIDE
SECURE EGRESS
SIDE SIDE
VARIES
FIRE-RATED GLASS
(DLO)
GLAZING TAPE
(BY OTHERS)
INTUMESCENT TAPE
FACE OF VERTICAL
SETTING PAD
COVER CAP
41 8" [105]
FACE OF VERTICAL
COVER CAP
FRAME DIMENSION (FD)
ROUGH OPENING (RO)
(DLO)
FIRE-RATED GLASS
GLAZING TAPE
(BY OTHERS)
INTUMESCENT TAPE
SETTING PAD
41 8" [105]
SMOKE SEAL
1 " [13]
2
DOOR HEADER WITH TRANSOM, DOOR MID RAIL, AND BOTTOM RAIL
69 HEAT BARRIER SERIES FRAME
NOTE: 1. Door adaptor is centered for 19-40 mm glass sizes. Door adaptor is offset for 41-71 mm glass sizes.
EGRESS
MINERAL WOOL SIDE
(BY OTHERS)
MOMENT BRACE
29 16" [65]
HARDWOOD SPACER
GASKET
VERTICAL MULLION
VERTICAL COVER CAP A-SIDE
PULL
FIRE-RATED GLASS
SIDE
PIVOT GLAZING TAPE (BY OTHERS)
SECURE
SIDE
INTUMESCENT TAPE
VARIES
29 16" [65]
FIRE-RATED GLASS
A-SIDE
GASKET
GLAZING TAPE
(BY OTHERS) PULL
SIDE MOMENT BRACE
SECURE INTUMESCENT TAPE
SIDE
M6 BHSC SCREW
(DLO) 31116" [94] 23 16" 2"
(DLO)
[55] [50.8]
NOTE: 1. Door adaptor is centered for 19-40 mm glass sizes. Door adaptor is offset for 41-71 mm glass sizes.
HARDWOOD SPACER
2"
23 16"
[55]
8
HORIZONTAL MULLION
CONNECTING BRACE
FRAME DIMENSION (FD)
DOOR ADAPTOR
INTUMESCENT TAPE
DOOR OPENING (DO)
GLAZING TAPE
(BY OTHERS)
FIRE-RATED GLASS
(DLO)
A-SIDE B-SIDE
PULL PUSH
SIDE SIDE
VARIES
HARDWOOD SPACER
2"
23 16"
[55]
8
HORIZONTAL MULLION
CONNECTING BRACE
FRAME DIMENSION (FD)
DOOR ADAPTOR
CLOSER
DOOR OPENING (DO)
GLAZING TAPE
(BY OTHERS)
FIRE-RATED GLASS
(DLO)
A-SIDE B-SIDE
PUSH PULL
SIDE SIDE
EGRESS
29 16" [65]
SIDE
VARIES
29 16" [65]
MOMENT BRACE
HARDWOOD SPACER
GASKET
A-SIDE
VERTICAL MULLION FIRE-RATED GLASS
PULL
SIDE
VERTICAL COVER CAP PIVOT GLAZING TAPE (BY OTHERS)
SECURE
SIDE INTUMESCENT TAPE
LEVER
60 and 120 Minute – Fireframes Designer Series Frame with Door By Others
Exterior Application
VARIES
113 16" 113 16"
VARIES FIRE-RATED GLASS
[45.9] [45.9]
GASKET CONNECTING BRACE
INTUMESCENT M6 BHSC SCREW
TAPE
HORIZONTAL MULLION
SETTING PAD
HORIZONTAL COVER CAP
[50.8]
M6 BHSC SCREW
2"
DOOR ADAPTOR
1 " [3]
A-SIDE B-SIDE
DOOR OPENING (DO)
PULL PUSH
SIDE SIDE
DOOR PANEL
SECURE EGRESS
SIDE SIDE
1 " [13]
2
NOTE: 1. Door adaptor is centered for 19-40 mm glass sizes. Door adaptor is offset for 41-71 mm glass sizes.
60 and 120 Minute – Fireframes Designer Series Frame with Door By Others
Exterior Application
SEALANT AND BACKER
ROD (BY OTHERS) B-SIDE
DOOR ADAPTOR
M6 BHSC SCREW PUSH
SIDE
GASKET WITH DIVERTER EGRESS
SIDE
MINERAL WOOL
(BY OTHERS)
MOMENT BRACE
115 16"
[50]
HARDWOOD SPACER
GASKET
VERTICAL MULLION
VERTICAL COVER CAP 1-3/4" DOOR (BY OTHERS) A-SIDE
PULL
PIVOT (BY OTHERS) SIDE
1 " [3]
8
FRAME DIMENSION (FD)
DOOR ADAPTOR
B-SIDE M6 BHSC SCREW
PUSH
SIDE
VERTICAL COVER CAP
113 16"
EGRESS
SIDE
VERTICAL MULLION [45.9]
VARIES
VARIES
115 16"
[50]
FIRE-RATED GLASS
113 16"
[45.9]
A-SIDE
PULL
GASKET
SIDE
NOTE: 1. Door adaptor is centered for 19-40 mm glass sizes. Door adaptor is offset for 41-71 mm glass sizes.