Professional Documents
Culture Documents
PowerUp 3.0; PowerUp Free Flight (2.0) PowerUp® is a trademark of TailorToys L.L.C.
Paper type - 80 to 100 GSM
Paper size - A4
www.poweruptoys.com
Printer setting - Scale 100% borderless
Elevator Elevator
Rudder Rudder
The Alpine template for: Copyright © 2015 TailorToys L.L.C. All rights reserved.
PowerUp 3.0; PowerUp Free Flight (2.0) PowerUp® is a trademark of TailorToys L.L.C.
Paper type - 80 to 100 GSM
Paper size - A4
www.poweruptoys.com
Elevator
Elevator
Elevator
Rudder
Rudder
Rudder
Rudder
Rudder
Rudder
Elevator
Elevator
Elevator
1. Start with the printed template 2. Fold the left edge to the upper 3. Fold the left edge to the lower
face up. Fold in half, the lower edge edge (both bolded) and unfold. edge and unfold.
to the top edge. Unfold. Turn the model over.
Elevator
Elevator
Rudder
Rudder
Rudder
Rudder
Elevator
Elevator
4. Fold the right edge to the end of 5. Collapse by pinching the circled 6. Showing step 5. in progress.
the diagonal folding lines. Note the points and bring them to the black
new crease line goes in the middle dot. At the same time let the left
of the X (created by the previous edge reach the same dot.
fold lines). Turn over again.
Elevator
Elevator
Elevator
Rudder
Rudder
Rudder
Rudder
Elevator
Elevator
Elevator
7. Fully collapsed. 8. Fold the model in half, 9. Form the wing by 10. Fold the upper wing
by putting the lower edge folding the two upper flaps tip to the center line.
on the top edge. along the wing folding line
marked on the template.
Elevator
or
or
at
at
ev
ev
El
El
r r
to to
va va
Ele Ele
Elevator
Elevator
11. Repeat steps 9-10 12. Raise the wings to 13. Raise the wing tips to 14. Your Alpine is ready!
on the other side. a perpendicular a perpendicular position to
position to the body. the wings, to make vertical
stabilizers.