Professional Documents
Culture Documents
Modul Penggunaan Autodesk Inventor
Modul Penggunaan Autodesk Inventor
INVENTOR
Oleh :
Saipul Bahri
180120201013
FAKULTAS TEKNIK
TANJUNGPINANG
2018
PEMBUATAN SUPPORT BRACKET
4. Then we choose 2D Fillet and change the size to 19 mm to make an change like
picture below.
5. Then select circle tool to create a circle like the picture below.
6. After that we select 3D, then click extrude and adjust the size as illustrated below.
7. After that we click origin on the right and select XY Panel.
8. Then select the line tool and make a line like the one below.
9. After that we make a line like the picture below.
10. After that select circle to make a circle like the picture below and only 19 mm in
size, if we have selected 3D model and click extrude, and temporarily change
back first.
11. After that we select extrusion2 then right-click and select edit feature like the
picture below and change the field that had become forward and its size adjust
to what we want.
12. Then we set the position of the field like the picture below and we click the YZ
panel.
13. After that we click the line tool and make a line like the one below.
14. Then we select the 3D model and we click Rib tool and adjust the size as shown
below.
15. Now the field is finished.