Professional Documents
Culture Documents
019-198 Fuse, Harness In-Line
Inspect
Remove the fuse
protective covers
from the fuse(s)
that are being
checked. Check
to make sure the
fuse is installed
in the fuse holder
correctly.
If the fuse is
installed
correctly, check
for a blown fuse.
Remove the fuse
(s) to be
checked.
Touch each one
of the multimeter
leads to each
fuse terminal.
Measure the
resistance.
The multimeter
must show less
than 10 ohms,
which is a closed
mk:@MSITStore:G:\MR_D.CHM::/english/procedures/99/99-019-198.html 13/07/2020
Fuse, Harness In-Line Page 2 of 2
circuit. If the
circuit is closed
then put the fuse
back into the
holder and
connect the fuse
cover.
Copyright © 2000-2010 Cummins Inc. All rights reserved.
mk:@MSITStore:G:\MR_D.CHM::/english/procedures/99/99-019-198.html 13/07/2020