Professional Documents
Culture Documents
To reinstall the door pieces, stick the end with the two teeth back into place. Guide them into the door
handle plastic.
Work your way to the rear of the piece, pushing back each tab into place before moving onto the next
one.
Now comes the fun part. The center console seems difficult, but it is just time consuming. If you take
your time and do it slowly it will be a breeze.
Start with your hook tool and wedge it under the climate control unit. Carefully pull this edge free.
Once you get this edge free, do the same on the other side.
Now pull the climate control unit free.
There are also two screws in the top of the vent that need to be removed as well.
The lower ashtray can be pried off next.
This exposes two screws at the base of the console that need to be removed.
Pull off the base of the armrest.
Remove the two hex screws and pull the armrest free.
Lift up the console.
Last but not least, once the console is off, flip it over. All you have to do now is remove the final 8
hex screws.
That is it. Seems a lot harder than it is. Do the exact same thing in reverse and your interior will be
back together in no time.