Professional Documents
Culture Documents
QY50K Truck Crane Technical Specification
QY50K Truck Crane Technical Specification
1. General Specifications
Max. rated lifting capacity: 50 t (with 5th outrigger jack, 360ºoperation of the
boom)
Max. lifting moment:1764kN.m
Overall length: 13.1m
Overall width: 2.75m
Overall height: approx. 3.35m
Total vehicle curb weight: approx. 38.58t
2. Carrier
Self-designed and manufactured carrier with 4 axles, full dimension cab. Max.
traveling speed is 66km/h.
Driving/ steering: 8×4×4
Min. turning radius: 12m
Min. ground clearance: 285mm
Approach angle: 16º
Departure angle: 11º
Grade ability: 27%
2.1 Frame
Self-designed and manufactured frame with all floors covered, optimized design
of loaded structure, anti-torsion box-typed structure, made of high-tension steel.
Boxes in which outriggers are stowed lie between 2nd and 3rd axle and in the rear
of the frame. Front and rear tow-hooks are available.
2.2 Carrier Engine:
Manufacturer: Hangzhou Automotive Engine Plant
Model: WD615.50
Fuel: diesel fuel
Coolant: water
Number of cylinder: 6
Rated output power: 206 kW/2200 rpm.
Rated torque power: 1100N.m /1400rpm
Silencer: made of steel, coated with silver color paint
Environmental protection performance: complies with Euro Ⅱ
Fuel tank capacity: approx. 250 L
2.3 Transmission system
2.3.1 Transmission
9- speed fixed shaft mechanical transmission, rear axles driven.
2.3.2 Axles
Heavy load bearing axles, made by famous manufacturer, designed through
importing foreign advanced technology, with reliable performance.
1st axle: single tire, for steering
2nd axle: single tire, for steering
3rd axle: double tires, for driving, 1-stage main reduction plus planetary reduction
4th axle: double tires, for driving, 1-stage main reduction plus planetary reduction
2.3.3 Driving shafts
Universal-shaft connected by flange, optimizes power transferring, easy to
maintain and convenient to disconnect/ install.
2.3.4 Suspensions
Leaf spring suspension of front axle and leaf spring equalizing suspension of rear
axle
2.3.5 Steering
Hydraulic powered mechanical steering.
2.3.6 Tires
12.00-20, suitable for heavy-duty truck, interchangeable, easy to replace
2.3.7 Brakes
Service brake: dual circuit air brake controlled by foot pedal. Max. working
pressure is 0.8Mpa. 1st circuit acts on the wheels of 1st and 2nd axle, 2nd circuit
acts on the wheels of 3rd and 4th axle.
Parking brake: air release brake, acts on the wheels of two rear axles by spring
loaded air chambers respectively on each axle.
Auxiliary brake: engine exhaust brake.
2.4 Carrier cab
Full dimension, fully enclosed cab, good sealing, anti-vibration and corrosion-
proof. 3 windshield wipers, rear vision mirrors of large view, electric control
window washers, safety glasses, electric lifts of door and window, heater with
defrosting device, adjustable pilot seats, air conditioner, radio-cassette player and
a dust bin are available. Left-hand steering wheel is adjustable for height and
inclination.
2.5 Hydraulic system
A 4-pump connected to engine through transmission and PTO provides hydraulic
power for lifting operation. Hydraulic tank capacity: 370L.
2.6 Hydraulic outriggers
4 hydraulic outriggers can be hydraulically operated. There is a control console on
each side of the carrier respectively. Levels for leveling the vehicle are available.
The outrigger floats are stowed under the jacks. Outriggers are designed to raise
the vehicle for operations in all kinds of working condition.
Outrigger span (longitudinal×transversal): approx.5.65m×6.6m.
5th outrigger jack: located under the front of the vehicle frame for 360º operation
of the boom.
2.7 Electrical equipment
24V DC, negative ground, 2 batteries. Lighting device comprises of front
headlamp, fog light and reversing light etc., complied with the relative regulations
in China National Standard.
2.8 Tool
A set of maintenance tool is available.
3. Crane Superstructure
3.1 Slewing mechanism
The roller slewing bearing as the connection of the carrier and the crane
superstructure can rotate 360º continuously. The roller bed is sealed to resist water
and dust.
3.2 Turntable
Designed and manufactured by XCMG, equivalent stress and tapered cross-
section box-type structure, made of high tension steel.
3.3 Hydraulic system
A constant replacement 4-pump is powered by chassis engine through
transmission and PTO. Superstructure hydraulic system is pilot open oil circuit
control with ferrule-type connecting piping. The main control valve is load
sensitive proportional multi-way valve, with shock-proof valve and air-corrosion
resistant valve fitted in each change valve. The pilot control valve uses imported
proportional pressure relief valve. The moving angle of the pilot valve handle has
direct ratio with the valve output pressure, so the whole machine has fine motion
control. Moreover, the load sensitive valve enables the working speed of
functional parts have no relation with load, so that reduce the operating difficulty
and lighten labor intensity for operator. Operations such as hoist up/down, swing,
elevating or telescoping can be carried out by hydraulic system.