Professional Documents
Culture Documents
CANH
F-CAN
CANL
ECM/PCM
U0029-1072
General Description
The controller area network (CAN) transmits/receives pulsing signals to/from the control modules simultaneously by using
two signal lines (CANH and CANL). When the engine control module (ECM)/powertrain control module (PCM) does not
receive the signals via the F-CAN lines for a set time, the ECM/PCM detects a malfunction and stores a DTC.
Sequence None
Enable Conditions
Condition Minimum Maximum
Malfunction Threshold
The ECM/PCM does not receive any signals via the F-CAN lines for at least 1 second.
Diagnosis Details
Conditions for setting the DTC
When a malfunction is detected, the MIL comes on and a Pending DTC, a Confirmed DTC, and the freeze data are stored in
the ECM/PCM memory.
U0029TTK4BAA000AN