Professional Documents
Culture Documents
fc' = 30 N/mm2
fy = 420 N/mm2
Concrete Steel Ast RFT. Validation
Column width Length or No. of Rebar Stirrup Total
Φ Capacity Capacity of ACI 10.9
Mark mm Dia mm bars Dia. Type Capacity KN Ratio %
KN KN (1% - 8%)
Page 1 of 9
DIA (mm) Area (mm2)
6 29
8 51
10 79
12 114
14 154
16 201 Stirrup Type
18 255 Spiral
20 314 Normal
22 380
25 491
32 804
REV 02:
Select the Element Type( Beam or Slab) in cell F1 it will affect As min
As min For Beams & SLabs
REV 03:
in Torsion check, if the tension force is huge, the concrete
resistance will neglected according ACI 11.5.1.c _cell C73
REV 04:
changing Astirrup total equation in cell C84 to equal to 0.0 if there are no stirrups needed
new equation is =IF((Av+nst*At)>0,MAX(Av+nst*At,Avmin),0)
Blue color is new part in this equation
REV 05:
1- changing Cmax to Cc in εs' calculation in cell C49
2- Calculated Φcalculated in cell(J3) beside the sheet to allow user to modify the used on according ACI 9.3.2.1 & 10.3.4
3- in shear check, if the Nu is tension force, we will use Eq. 11-3 instead of 11-4 according ACI 11.2.1.2 _cell C57
4- Special Consideration for seismic Design
3.2.1 & 10.3.4