Professional Documents
Culture Documents
Note: For further information on wear inspection, see Inspection of wear, general.
1
Remove the plug in the measuring hole on the clutch housing.
Insert measuring tool 9998579 into the hole and against the clutch release fork.
Move the slide towards the clutch housing and lock with the lock screw.
3
Remove the measuring tool 9998579 and note the value for the slide.
4
Note the value on the label.
• X1 = new plate
• X2 = measured value
• Y = max wear range,
Y = X1 - X2
For single plates, Y = 34 mm
For double plates, Y = 36 mm
• D = date