Professional Documents
Culture Documents
FEATURES
INTRODUCTION
The AEL1046 contains all of the functions required for studying and
experimenting with analog electronics, digital electronics, telecommuni-
cation electronics etc. The AEL1046 is a complete analog and digital
training platform which is compact, lightweight and extremely durable.
The trainer can be used to carry out experiments either by normal com-
ponents using breadboard or pre-wired experimental modules.
SPECIFICATIONS
Frequency fine adjust
1. Removable Solderless Breadboard Amplitude adjustable
Interconnected nickel plated contact with 2960 tie-
points (removable type)
TTL/CMOS selectable by input DC voltage level.
2. Removable Components Plug-In Board Output TTL and Complement TTL levels
3. Experimental Modules Mounting Area (The pre-wired experimen- 10. Two Single Shot Pulse Push Buttons
tal modules are optional) 2 units push-buttons debouncer switches
4. DC Power Supply
80µS pulse
Variable : 0~ ±24VDC/1A 11. Two (2) Pulse Switches with debounced circuit
Fixed : ±5VDC/1A Provide two sets of pulse output A, /A, B and /B. 2 units push but-
ton switch contain switches debouncer for eliminating the bounce
Fixed ±12V/500mA
caused by switch from "open" to "close" or from "close" to "open"
With built-in protection circuits position.
5. Sixteen Bits Buffered LED Indicators (6 x red, 5 yellow and 5 x 12. Two digits of 7-segment LED Display Module
green LEDs)
6. Sixteen Bits Data Switches with debounced circuit
Output numerical displays
7. TTL/CMOS Selection Switch
Select TTL (+5V) or CMOS (+12V) Mode for data switches
8. Function Generator
Output waveforms : Sine, Triangle, Square and Sawtooth wave-
form output Segment Identification
Output frequency range : 0.1Hz to 2MHz
Frequency resolution : 10mHz
Amplitude : ≥10Vp-p, min. 0.1Vp-p
DC offset : ±3V
TTL mode output 13. 3-State Logic Probe Module
Duty cycle : 1% ~ 99% HI, Float & LO Level LED Logic Indicator
14. Speaker Module
Attenuator : 0dB and –20dB
8Ω, 0.25W with buffer
Frequency sweep : Lin/log 15. Digital DC Volt Meter
Frequency counter : 1Hz ~ 60MHz 3 ½ Digits LED display
Control : Digital control with buttons and control knob Four voltage ranges :
Display : LCD display 0V to 199.9VDC
Data save and load function. 0V to 19.99VDC
9. Pulse/Clock Signal Generator (Variable) :
0V to 1.999VDC
Output frequency range: 1Hz ~ 10Hz
10Hz ~ 100Hz
0V to 199.9mVDC
100Hz ~ 1kHz Input Impedance: 10Mohm for any range
1kHz ~ 10kHz
10kHz ~ 100kHz
100kHz ~ 1MHz
MP-SCIENTIFIC
ANALOG ELECTRONICS LABORATORY
AEL1046 UNIVERSAL LAB TRAINER
16. Potentiometer Module PRE-WIRED EXPERIMENTAL MODULES
With 1kΩ, 100kΩ and 500kΩ Potentiometers
17. Adaptors Module
6 Channels Banana to 2mm Adaptor Interface Socket and turn
pins sockets (2mm & 4mm Adaptor Interface Socket to turn pins
socket)
18. Power Supply : 240VAC, 50Hz (Fused Protected)
19. Dimensions : (W x D x H) 450 x 410 x 110mm
20. Weight : 4.5 kg
COURSEWARE
ACCESSORIES
MP-SCIENTIFIC