Professional Documents
Culture Documents
If the mask is too small after building, try You may want to check for supplementary
cutting a slit in the back or lengthening one instructions on each page of the pattern before
included in the design. If too large or loose, you printing, particularly if you’re planning on
can try padding the insides with foam or cloth using multiple colors of paper.
or building a headband from this guide:
http://tetravariations.com/headband/
Cutting
What You’ll Need Cut the solid lines using scissors or a craft knife.
• Paper or Building Material Cut out pieces no more than one to two pages at
I suggest 110lb (200 gsm) or 65lb (175 gsm) a time so there aren’t too many to sort through.
card stock, size US Letter or A4. The pieces are labelled by letter and will
You can also print to regular paper and glue generally be assembled alphabetically: A, B, C1,
the pages to stiff materials like old manila C2, D, E1, E2… Y, Z, AA, AB, AC, etc.
folders or cereal boxes or trace the pattern
onto them.
It’s possible to build using corrugated Folding
cardboard, though it’s challenging to get the
folds straight (a straight-edge helps), and Before folding, score the fold lines by lightly
tab-less building must be used (see Tips) sliding a craft knife across them or by running
• Access to a Printer over them with a blunt point like an old ball-
Most home and office printers work fine point pen. This helps keep the folds straight. It
• Adhesive helps to use a straight-edge for this.
Glue creates a stronger and neater bond, but
is a slightly slower process. For glue, I Mountain-fold the dashed lines: (number shown
recommend Tacky Glue, though any non- is only for reference)
toxic glue can work well. Some glue sticks
work well; others have weak bonds.
Tape can be faster, though less neat and
difficult in tight spaces. For tape, I
18
recommend anything intended as a long-
term bond. Avoid cheap invisible tape or Valley-fold the dot-dash lines:
masking tape as they loosen easily.
• Cutting Tools 69
Tetra Variations
Space Robot X3 Mask Pattern
26
Finishing Touches
27
27
Tetra Variations
Space Robot X3 Mask Pattern
www.TetraVariations.com
License
• You may make copies of the patterns for personal or educational use; no commercial use is permitted without written permission from Tetra Variations. We’re usually
pretty happy to give permission if it’s a one-off kind of thing and you give us credit, so go ahead and ask. We’re really nice, we promise.
• Public or large-scale distribution of patterns by digital or physical means is prohibited. So don’t post this on the internet, please; we beg of you. We’re not exactly making
bank here, so it’s tough to lose that income.
• Purchase of patterns does not constitute transfer of ownership or rights to the patterns. It’s mine, it’s all mine, my precious!
• Tetra Variations is not liable for injuries or property damage sustained when following any advice or instructions. Please be responsible when using scissors, knives, glue,
electrical components, or other tools for construction, and follow all reasonable safety precautions. We’d hate to hear that you’d hurt yourself building something. Unless
it’s a really minor and sort of silly injury and you laugh it off and post it on Youtube. Then we’d definitely watch that.
Tetra Variations
6 13 RobotX 03 Pattern
13 6
53
55
© Tetra Variations - @TetraVariations
http://TetraVariations.com/
13
13
3
131 133
28
19
130
135
A
13
0
13
5
16
27
15
25
12 4
9 13
132
132
The piece below on the left is the part that juts out from the chin. It is likely the last piece
to be built onto the structure. It is included here in order to save space and also to make
it easier if you want the ornamentation pieces like the above gem and the chin piece to
be printed on different colors of paper.
168
162
16
9 9
16
167
161
7 161
16
The piece below is only for ornamentation and may be
left off. It is intended to be glued over the front of the
ridge that juts out from the top of the head. If used,
165
160
163 164
164
3
16
6 166
16
21
22
28
B1
21 20
29
26
23
25
24
C1
27
22
20
23
29
24
18
2
17
Build the sharp 19
piece, then
attach the
bulkier piece.
170
Then attach them
together to the
C2
3
17
structure as a single
17
173
unit.
171
4
17
B2
15
18
16
2
17
4
17
17
0
RobotX 03 Pattern
171 © Tetra Variations - @TetraVariations
http://TetraVariations.com/
RobotX 03 Pattern
© Tetra Variations - @TetraVariations
80
http://TetraVariations.com/
14
0
14
3
52
112
26
71
14
2
14
1
9
12
F
E
113
D
73
14
1
4
13
76
14
75
2
14
0
111
113
14
3
52
43
17
G
55
11
53
2
42
56
54
38 51
RobotX 03 Pattern
© Tetra Variations - @TetraVariations
http://TetraVariations.com/
39
40
38
49
70
69
H1
51
71
72
41
42
73 H2
43
90
111
75
74
76
44
45
120
80
46
79
78
77
69
74
72
118
7
58
58
I1 57
57
11
7
40
59
11
5
50
49
47
47
48 41
48
12
I2 87
84 RobotX 03 Pattern
© Tetra Variations - @TetraVariations
81
http://TetraVariations.com/
39
5
3
54
1
56
4
2
70
9 6
50
5 4
1
RobotX 03 Pattern
© Tetra Variations - @TetraVariations
http://TetraVariations.com/
104 107
10
14
63
10 14 159
156
11
13
157
L O1
158
78
59
12
121
9 6
8 5
152 15
45
96
O2
89
153 154
The two smaller pieces on this page are included here to save paper when
printing. It also is convenient if you want the vent-like areas facing forward
on either side of the head to appear the same color as the ridge on top
of the head. They should be attached after the next page.
RobotX 03 Pattern
© Tetra Variations - @TetraVariations
http://TetraVariations.com/
97
121
82
120
122
83
83
103
81
119
118
82
11
105
84
85
104
M1
M2 N
107
106
117
116
13
87
10
8
86
5
11
110
11
114
4
90
88
8
10
89
109
RobotX 03 Pattern
© Tetra Variations - @TetraVariations
http://TetraVariations.com/
109
15
3
100
6
12
12
7
137
116
88
124
S1
99
P2
86
P1 138
119
123
122
85
98
139
15
8
This
large piece 97
12
cannot be 5
attached yet. It
should be attached
66
with its opposite in a
two pages.
12
RobotX 03 Pattern 8
9
15
© Tetra Variations - @TetraVariations
http://TetraVariations.com/
101
102
98
137
91
123
Q1 Q2
138
99
92
125
95
0
128
13
10
9
154
157
RobotX 03 Pattern
© Tetra Variations - @TetraVariations
http://TetraVariations.com/
101
94
12
6
103
93
93
105
94
R
This piece's opposite was S2
from two pages previous.
91
106
127
124
92
102
37
95
RobotX 03 Pattern
© Tetra Variations - @TetraVariations 96
http://TetraVariations.com/
RobotX 03 Pattern
31
44
© Tetra Variations - @TetraVariations
http://TetraVariations.com/
30
31
30
46
T1 33
145
152
32
33
35
32
36
35
155
66
34
34 U1
64
36
64
63
62
62
65
U2 37
60
60
61
65 61
67
77
67
68
79
68
148
V1
1
15
15
1
149
149
165
15
0
8
16
147
0
15
4
14
144
147
V2 146
16
2
146
145
160
RobotX 03 Pattern
© Tetra Variations - @TetraVariations
http://TetraVariations.com/