Professional Documents
Culture Documents
paperart
FLAMINGO
PAGE 1/16
Instructions for
Printing and Folding
Print on thin Paper and adhere the mask pieces to cardboard. This method
will result in the printed lines and pattern guide numbers being hidden on the
inside of the finished mask.
(1) Print your mask pieces on plain (4) Using a thick sewing needle or
printer paper. blunt knife and a ruler, score along the
folding lines.
(2) Glue the mask pieces to the back
of your cardboard. We recommend (5) Refer to the diagram below and fold
using spray adhesive or a glue stick as along the creases either bringing the
other types of glue may make the two edges towards you (Valley Fold)
paper too wet. for the plain dashed line folds or away
from you (Mountain Fold) for the dot/-
(3) Cut out the pattern pieces along dashed line folds.
the solid cutting lines.
(6) Proceed to Assembly Instructions
Note: the dashed lines are folding section.
lines, make sure not to cut them!
IMPORTANT
PAGE 2/16
Mask Assembly Instructions
Assembly
(8) After completing the mask you can
(7) Each number on the mask pattern optionally assemble our fitting band on
has a twin. Find the matching numbers the final page. Tape it to the inside to
and attach the two pieces together. get an optimal fit for your mask.
Option 1 / Easy
Clear Adhesive Tape
PAGE 3/16
flAmingO colorS
Eyes p.9
Pink p.10-15
White p.5-7
Black p.8
PAGE 4/16
White
17
27
15
4” (100mm)
31
16
24
gluE flapS
20
18
19
21
25
22
w w w. l a p a s t u d i o s . c o m
PAGE 5/16
White
10
37
45
14
14
foR nose
brIdge p.9
1
11
13
12
16
9
21
PAGE 6/16
White
39
8
48
8
foR nose
brIdge p.9
2
3
7
4
17
19
PAGE 7/16
Black
31
24
30
30
29
27
29
22
25
23
23 26
26
32
32
28
28
PAGE 8/16
nosE bridGe.
thIs piEce iS gluEd to the InsidE of thE
Mask BetweEn thE eyes. it provIdes A
Great fit For tHe maSk.
seE pagE 6+7.
2
puPils / blacK
iriS / coloreD
PAGE 9/16
Pink
44
20
45
46
10
9
40
36
12
11
33
PAGE 10/16
Pink
49 47
18
48
6
35
38
4
3
34
PAGE 11/16
50
Pink
40
35
36 38
37
39
13
15
PAGE 12/16
Pink
46
41
51
50
51
49
43
PAGE 13/16
Pink
42
41
33
44
PAGE 14/16
Pink
42
43
34
47
PAGE 15/16
The Fitting Band
The fitting band for your mask will be made from strips of
cardboard paper and can be adjusted to get a good fit.
(1) Cut 3 strips of A4/US letter paper. (4) Tape the ends closed to make one
Each strip should measure 1.5" continuous loop of paper.
wide (40mm) and the length will be
the full length of the page. (5) Cut out 2 rectangles from the sheet
of paper, each one should measure
(2) Stick the short ends of the strips 1.5" x 4” (40mm x 100mm).
together with tape to make one
long strip of paper. (6) Tape one rectangle on either side
of the band (see drawing below).
(3) Wrap the long strip around your
head, overlapping the ends; make (7) Place the fitting band inside of the
sure that the resulting band is a mask and tape it to the back of
snug fit. the mask.
CutouT arRange
A4 papeR / us leTter papeR
1.5”/40mM
1.5”/40mM
1.5”/40mM
1.5”/40mM
4”/100mM
PAGE 16/16